Creality Falcon 2 40W Laser is DESTROYING the competition when it comes to cutting. Impressive laser

Рет қаралды 13,415

6 ай бұрын

When it comes to diode lasers, there is no other laser on the market that can cut as good as Creality Falcon 2 40W laser engraver. In todays video I will review this impressive machine, will do some testing and will also tell you where is falling short. #crealityfalcon2 #laserengraving #lasercutting
IF YOU WOULD LIKE TO SUPPORT THE CHANNEL AND PURCHASE ANY OTHER STUFF THAT I MAKE YOU CAN DO THAT NOW HERE. www.skylerewing.store
========================================================
Affiliate Links
=========================================================
The links in my video description are affiliate links, which means at no extra cost to you, I will make a small commission if you click them and make a qualifying purchase
BUY LASER HERE AND USE COUPON CODE " 20FALCON" FOR 20%OFF.
Creality Laser Engraver 40W Output, 240W High Power Falcon2 Laser Engraving Machine, DIY Laser Cutter and Engraver Machine for Metal and Wood, Paper, Acrylic, Glass, Leather. amzn.to/3sqpZbi
Creality Laser Engraver 22W Output, 120W High Power Laser Engraving Machine CNC, DIY Laser Cutter and Engraver Machine for Metal and Wood, Paper, Acrylic, Glass, Leather etc, 17" x 16". amzn.to/3u6fWsp
OR BUY HERE and use coupon code NEWFALCON for 15%OFF. s.zbanx.com/r/qT8QQJ9yPZov
www.crealityfalcon.com/produc... use code NEWFALCON
store.creality.com/pages/lase... code FALCONALL

Пікірлер: 49

@truthbetold2914 6 ай бұрын

WOW! You look great today! It looks a bit chilly there.....

@johnjacobjingleheimerschmi9997 3 ай бұрын

🤦‍♂️

@pbgrafx 6 ай бұрын

The Creality Falcon is amazing. Thank you for the demo. Love your living room!

@MrLuvFlorida 6 ай бұрын

Great Review… I love your detailed and honest opinions.

@Bax60 6 ай бұрын

You should he a narrator. Your wonderful voice and accent is very soothing

@woodworkingwithSkyler 6 ай бұрын

:) thank you

@Wood-bw5kq 4 ай бұрын

Thank you. Very insightful and helpful. Much appreciated.

@hi-tech-handyman 5 ай бұрын

Great job! I love that room you finished up in. Nice style.

@flashwashington2735 6 ай бұрын

Nice demonstration by superior presentation. Thanks. God bless.

@ChrisBloom 6 ай бұрын

great advice on the air-assist. Thank you. Setting up my new S1 this weekend from your affiliate link 🙂

@woodworkingwithSkyler 6 ай бұрын

Fantastic! Let me know if you have any questions

@SirMiddo 6 ай бұрын

Great Review!

@woodworkingwithSkyler 6 ай бұрын

Glad you enjoyed it

@ljgault 6 ай бұрын

I enjoyed the review. When you say a number and speed in your reviews are you using inches per or MM per Sec/Min.?

@marbert9012 6 ай бұрын

Hi, I understand that you avoided more passes to test the laser power in your review. I found that in normal operation it's not recommended to keep 100% power for long time to extend laser life and reduce overheating. Do you have any practical suggestion for power/speed/passes in typical, extended working conditions? Thanks

@pix23 6 ай бұрын

Where did you find detailed information about the laser spot / kerf sizes of the lasers in their various modes? I haven't had any luck getting more than one dimension

@dougk5456 6 ай бұрын

Great review! When I tried to look at the warranty it was stated that you would need to contact the manufacturer directly. Did they share any information on the warranty with you?

@kentharris7427 6 ай бұрын

You have me sold on the Falcon 2 40 Watt laser. I make custom clocks for friends and for Family during the Holidays. I currently have a Longmill CNC router which has an accuracy of a tenth of a millimeter. I cut 1/4" plywood with the router and make a hole in the middle for the clock shaft. I modified the CNC Router so I could attach a 20 Watt laser to it. The laser is good for engraving but the only material it can cut is felt, doesn't matter how many passes, even on 3 MM plywood it is not able to cut through. Since the Falcon 2 can cut and engrave at the same time. Looks like a perfect laser for the job.

@woodworkingwithSkyler 6 ай бұрын

You will love the cutting ability of creality! You can cut half in hard wood with no problem. Even 3/4 in poplar it can cut in one pass

@GroundedFlyboy737 6 ай бұрын

Skyler, I'm glad you mentioned the inferior engraving prowess of the Creality machine. While watching your demonstrations, they weren't half as nice as the demos you did with the XTool S1. Stupid question but if you turn down the "power" of a 40W laser, does the kerf get correspondingly smaller as well? Or is it always the same for that particular laser module much like a saw blade. Thanks! (What else are you making for your holiday tables?)

@GroundedFlyboy737 6 ай бұрын

Okay, nevermind.

@mcegood2210 4 ай бұрын

I'm curious if you have tried cutting any metal with this, such as thin brass, copper or aluminum.

@littlejohnny3215 5 ай бұрын

Thank you for this very informative review. So with everything you said about cutting vs engraving, I’m interested in doing more wood inlay (3/16”-1/4” thk.) work, with the occasional engraving on various materials. Can you show some close up views of the engraving quality of this machine in another video?

@woodworkingwithSkyler 5 ай бұрын

Hi Johnny. I gave away my creality machines, so I won’t be able to show you close ups. I use my lasers mostly for inlay and I really like Xtool and longer for that

@dwightstebner2345 6 ай бұрын

what is the work area size of this

@cbulorg9582 6 ай бұрын

Did you use the "Lower the Focus" option on the S1 cutting Test?

@woodworkingwithSkyler 6 ай бұрын

No, I did not.

@gorrammudder1600 6 ай бұрын

7:48 The only time I turn off air assist is when I'm cutting paper or vaneers for inlays. This prevents small bits from being blown away and possibly into the lasers path.

@woodworkingwithSkyler 6 ай бұрын

Yes. Totally agree

@jamesewing5863 6 ай бұрын

I'm looking for a laser cutter/engraver that will give me the best photo engravings on wood or metal and also cut .05mm steel. However, when i cut the VERY thin steel sheets, I need to cut 16mm x 4mm sections. Do you know of any that can do this with that type of accuracy?

@woodworkingwithSkyler 6 ай бұрын

xtool will do great with engraving and will be very accurate. I never tried to cut steel, so i dont know about that

@Steve-nk5sz 6 ай бұрын

Ohh WOW 😳 look at those

@perjian1697 5 ай бұрын

Just tried the coupon codes and says they've expired already. 😢

@norm5785 6 ай бұрын

Nice multi purpose laser. Thank you for sharing. Everyone stay safe, happy and healthy. From Henrico County Virginia

@woodworkingwithSkyler 6 ай бұрын

Thanks Norm

@RamiroRamirez62 6 ай бұрын

❤ Good Morning great demonstration of this Lazer. ❤ arăți foarte bine azi 🥰

@woodworkingwithSkyler 6 ай бұрын

Thank you

@RamiroRamirez62 6 ай бұрын

@@woodworkingwithSkyler your welcome 🤗

@Bax60 6 ай бұрын

@@RamiroRamirez62 Sie sieht jeden tag gut aus ..bruder

@RamiroRamirez62 6 ай бұрын

@@Bax60 Ja, ich weiß, deshalb schaue ich mir ihre Videos auf. Danke, mein Bruder

@dennishall9260 6 ай бұрын

You have demonstrated several laser cutting/engraving machines... in your opinion, factoring cost and capabilities, which machine would you suggest to a first time buyer?

@woodworkingwithSkyler 6 ай бұрын

Xtool S1 for new or advanced user. Unless you are purchasing a laser strictly to just put your logo on things. Then a cheap Longer ray5 10W will do for around $300

@howlinmad4208 6 ай бұрын

Nice to see a straight answer😂