Creality Sermoon D1 Ultimate Extruder Upgrade!
Рет қаралды 42,840
Күн бұрынI received the Creality Sermoon D1 and I was in doubt if I should upgrade it. I thought that this printer could be my daily driver since most of my 3D printers are specifically tailored to experiment with. Besides some "weird" design choices I do like this printer, but the direct drive extruder was constantly skipping. ABS came out like a sponge and I was better of with a standard Ender 3 pro. I read more articles about this printer in which it was a shame that it was not possible to add an aftermarket hotend, until now...
You can download the parts from my website properprinting.pro/product/se...
I have used ABS from 3D4Makers and if you're interested in their professional materials, check out their website www.3d4makers.com/ and get 10% off of all purchases by using the promo code properprinting
I've got new merch!! Check out merch.properprinting.pro
And special thanks to my highest tiers:
- The 3D printing Belgian / 3dpbelgian
- Ege Aydede
- The Sauce
- 3Dgeneriert / 3dgeneriert
- MrCristobal
- Bob Verschoor
- David Fillmore
- thej0ker
- Oscar Molina
- Andy Wright
- Alward
- Brent Johnson
- Kenny Eaton
- ZiGGstern
- LumenMesh, Inc lumenmesh.com/
- Venturi 3D venturi3d.com/
- SyFy Design www.syfydesign.com/
- Mitch Rife www.printitnow3d.com/
- Keith Coventry
- Philip W
- Zachary 3D prints / zachary3dprints
- ent-ρ-π
- CHACBON
- Muhannad Abbas
- BrokenMic
- Sebastian Cox
- Snoopy VonPhoenix
- Kurtis van Kampen
- Jimmie Clark
- Doug Walmsley
- Lorenzo H
- Mauro Sequeira
- Jack Greer
- SpideyFresh
- Ruben
Chapters:
0:00 Intro and explanation
2:31 Taking the printer apart
4:44 Explaining the design in Fusion360
8:02 Adding the mod
9:03 Custom fan duct
12:34 First test print
14:37 Adding the final fan duct
16:33 Outro
Music from Epidemic sound. Want a subscription yourself? Please use this referral link to support me: www.epidemicsound.com/referra...
Please consider buying me a coffee if you liked it or helped you :) ko-fi.com/properprinting/
The link to my website: properprinting.pro/
Software used for making my videos:
- Mechanical design: VariCAD www.varicad.com/en/home/
- Illustrations: Inkscape inkscape.org/
- Laser engraving: Lightburn lightburnsoftware.com/
- Slicer: Simplify3D www.simplify3d.com/
- Second slicer: IdeaMaker www.raise3d.com/ideamaker/
- Video editing: Davinci Resolve www.blackmagicdesign.com/
- Screen recording: OBS Studio obsproject.com/
- Audio recording: Audacity www.audacityteam.org/
- Audio enhancement Cakewalk www.cakewalk.com/
- Photo enhancing: rawtherapee.com/
- Terminal: Termite www.compuphase.com/software_t...
@properprinting 2 жыл бұрын
This was the first time for me planning a video automatically and it should've been live at 2pm. Well, guess who screwed up this time xD Enjoy the video and I'll put up the design files later today.
@anomicxtreme 2 жыл бұрын
I'd really like those parts you removed so I could try to incorporate them into my cnc setup. XD
@kpatrickm 2 жыл бұрын
34k subscribers is Criminal for the ingenuity and workmanship this channel offers
@electrosync 2 жыл бұрын
That macro shot of the heat set insert! Amazing!
@rexsolomon6325 Жыл бұрын
You don't need an award for us to believe in your expertise. Subscribed.
@colinfindlay4790 2 жыл бұрын
The clip of you dropping washers is every maker's pain, only beaten by dropping the exact same washers while crammed into a small space and unable to move your arms...
@properprinting 2 жыл бұрын
I had to reach to those damn pliers too. I had to stretch as far as I could while holding the part upright. I was having so much fun xD
@TuncayAyhan 2 жыл бұрын
@@properprinting I almost pissed my pants watching that part.
@agima2000 2 жыл бұрын
Great idea, based on the holder I converted the Sermoon to a linear rail. A very different printer now. The conversion is not for beginners as it is quite extensive. Thanks for the implementation and idea.
@madeintexas3d442 2 жыл бұрын
Almost got an ender 7 really happy I'm making a voron instead.
@jon_blackford2326 2 жыл бұрын
LETS GOOOOO! I'm always hyped for new videos from you, keep up the great work!!
@angelahatch2544 Жыл бұрын
You keep me laughing while I enjoy your science, science I dream of doing!!!
@rickym.6409 2 жыл бұрын
I agree with Jonny Boy. I get hyped every time I get a notification for you videos. You thah man MAAAAN. Looking forward to that rim. Can't wait!
@corlissmedia2.0 Жыл бұрын
Great to see you making videos again!
@colinfielder6695 2 жыл бұрын
Genius 1% inspiration and 99%perspiration. I think you qualify. You my friend are a Genius!
@Lecsi11 2 жыл бұрын
I love your content, the editing is spot on, and I love your music choices :D
@anoopdsouza6868 2 жыл бұрын
Nice! Hope to see more of your creations per week.
@SshanIcsS 2 жыл бұрын
I love Videos like that. Thanks. Mods like this are pure fun.
@kevinpepe9101 2 жыл бұрын
Awesome video! You never disappoint!
@Fightbird2013 2 жыл бұрын
Hay :-), first: Love your Videos! Thanks for every one 😊. Great to see another Sermoon. Mine runs on a custom Klipper config that i made and a Full Touchscreen delete for the Pi. That solved every drawback i found with the Printer. Im now able to print a Very nice Benchy in 40min with everything else stock! Im now running into cooling problems. Greetings from Germany.
@Keveira 2 жыл бұрын
Yes sir, Chief Modification Master, sir.
@dallibabs 2 жыл бұрын
Always love the vids keep them coming.
@Slamar 2 жыл бұрын
Great modification. I'm waiting for the same direct drive kit as You mounted today, I will put it into my ender3, I'm using my printer and only one thing I can't overcome is my prints very much like to don't be sticky glass bed, I mostly print with petg
@fafane65 2 жыл бұрын
Glad to see i'm not the only "box top covering" user xD Great content, great video and i like you show most of fail
@vmjr748 2 жыл бұрын
You make the funniest videos, keep up the good work.
@stevehind7318 2 жыл бұрын
Great content as always, glad you got it working well for your needs in the end. I also couldn't stop laughing at the part where you're using tweezers to place the washers on the fan mount hahaha, pure comic gold sir ;) Keep up the good work
@Zachary3DPrints 2 жыл бұрын
Cool video, indeed Coffee is always needed with something like this.
@properprinting 2 жыл бұрын
Thanks! Can't do without indeed
@kippie80 2 жыл бұрын
Way too much restriction for that part fan! You'll know because it runs noisy. Also, if you put some smoke around the fan, there will be lots of turbulence at the input side. Try adding some bleeder holes -- keep drilling holes and note how it gets quieter. When it quiets down, you'll have enough holes! Think about 40% of the input area on the fan for the output (ballpark number).
@properprinting 2 жыл бұрын
Thanks a lot for your input! I didn't give it too much thought, but it would be a good idea to do a bit more research on this topic. I'll design more ducts in the future probably. I'll take a look into your suggestion :D
@pringineer1027 2 жыл бұрын
@@properprinting just my two cents about this: i recently designed a few iterations of ducts (tho for blower fans) for my own machine and I actually tried to bend the air flow as little as possible while keeping the outlet as close to the inlet size as possible. I have some friend run CFD for me and it really helps you understand that complex topic. My solution was loft with a guide rail spline or actually two
@Sebazzz1991 2 жыл бұрын
Really, use blower fans only for part cooling - no axial fans. This guy has _excellent_ videos about this, and testing the effect of blower fans vs axial fans: kzfaq.info/get/bejne/ib5dos6ArdzMYYU.html In some cases axial fans can even cause a reverse airflow!
@SplitPhotography 2 жыл бұрын
I just threw on radial fan on hestsink as well.. all potential heatcreeps eliminated! And, you can have restrictions in the blower route design. Little more noise, but no problem for me vs what i get for it.
@CC-kc5lb 2 жыл бұрын
You do a great job with your videos big up to you
@Mueller3D 2 жыл бұрын
Something you should add to your tool collection: screwdriver-shaped allen (hex) drivers with proper handles. So much easier to use than the L-shaped ones! You'll be far less likely to drop them. Only disadvantage is that you can't get the torque you can get compared to driving with the short end of the L (long end out).
@redwraith6576 2 жыл бұрын
Oh man, I can feel your pain assembling the hotend housing and fan! I do not know how many times I have just dropped my allen keys, washers and screws you will never find again! Great video otherwise! keep up with the good content!
@hungryjuggalo007 23 күн бұрын
In my opinion, the D1 has the potential to be an outstanding unit that'll just flat beat anything else available, but falls short in so many unnecessary and goofy ways. I'd LOVE to know how yours is doing after all this time and/ or anything else you've done to it since this video (also, i have BTT SKR V1.4 Turbo and SKR Mini E3 V3.0 Control Board, should I use one of these or keep original board?). I'm a HUGE fan of your channel and videos, but your mechanical and analytical thought process is what keeps me coming back for more. Thank you, sir.
@Aaku13 2 жыл бұрын
Love your channel. Do yourself a favor and get a set of inverted/spring loaded tweezers. They'll automatically keep the tension on your small objects, like washers, so they don't go flinging away if you accidentally squeeze them.
@dfx62 Жыл бұрын
Epic mod,thanks for sharing. Are you planning to make an adapter for the new Creality Sprite hotend as wel? So far it seems brilliant.
@AdrianCiubotariu 2 жыл бұрын
loved the part with the rubber gaskets :)) then the allen key jumping away from you. it happened soooooo many times :))))
@properprinting 2 жыл бұрын
Haha and I didn't even shown all of it xD It was quite the struggle haha
@AdrianCiubotariu 2 жыл бұрын
@@properprinting I sometimes drop the whole thing and go outside for a sec to cool down 🤣🤣
@properprinting 2 жыл бұрын
@@AdrianCiubotariu haha exactly, that prevents a lot of mayhem😂
@theofficialczex1708 2 жыл бұрын
Creality hasn't hit it out of the park since the Ender 3 and 5. This one is no different from the other quacks of printers. Do they do any actual R&D? Why are there acrylic panels when there's no top?
@AlternateRC 2 жыл бұрын
Owning a CR-10 and the Sermoon D1 the difference is like comparing a VW to a Ferrari. Yes it needs dialed in, but once it is, its a beauty.
@willmeyers9602 Жыл бұрын
the 6 has been a good workhorse for me and with the spyder I can do high temp stuff..
@smackdabinu5459 2 жыл бұрын
“ALL HAIL THE CHIEF MODIFICATION MASTER!!” ( Of which year? ) 😂 LOL You’re fun to watch and make interesting videos. Thank you!
@kjgfalsk 2 жыл бұрын
OF ALL TIME!!!! xD
@arminth 2 жыл бұрын
Missed the Kartoffelsalat a bit! 😂 Other than that: Großes Kino! As usual!
@tituscassiusseverus6303 2 жыл бұрын
That broken award inspires real confidence in your ability 🤣. Congrats on winning the prize though, does Huvud run on CAN Bus, would like a video about that please.
@pringineer1027 2 жыл бұрын
Damn the upload time is insane and it's even worse I'm still awake. But oh hey. Time for some proper printing at 2:30 am :D
@properprinting 2 жыл бұрын
I thought I planned the video for 2pm. First time planning a video and I just woke up realizing I messed up😅
@pringineer1027 2 жыл бұрын
@@properprinting ah you know i thought you were just knowing i couldn't sleep and give me treat here :D
@OldCurmudgeon3DP 2 жыл бұрын
How "slow" do you run your Ender 3? I can routinely slice at up to 140mm/s before I outrun my hotend's melt capacity. 10:00 an issue you may have realized later in the video (still watching) is that muffin/axial fans do not perform well when ducted. ABS isn't so picky though.
@pringineer1027 2 жыл бұрын
The ducting might also be very constraining too
@properprinting 2 жыл бұрын
I usually print around 40-50 mm/min. I tried to say that I had to print slower than a bed slinger which I think shouldn't be the case. I honestly didn't think much of the duct and it's a good idea to do some research on that.
@OldCurmudgeon3DP 2 жыл бұрын
@@properprinting I want to say that CNC Kitchen did a video comparing fans a few months ago, but I'm not certain it was him. It could have been Chris Riley. A stock Ender 3 should be able to manage up to about 70mm/s. When I ordered mine the seller installed a microswiss hotend, but the stock one should still manage 60 or so. I should have listed my upgrades, to be fair, when I made my speed claim... MKS Gen L board w/ TMC2130s Titan clone direct drive Dual 5015 duct by Petsfang PEI flex sheet Klipper firmware Klipper has probably made the biggest improvement along w/ the Titan. I've done some tuning and my acceleration is about 2500mm/s/s currently. I could probably fo higher, but I need to attach an accelerometer to it for further tuning.
@davidhofman4341 5 ай бұрын
I ran a belt above the deck between the two z screws. I have problems with the cr touch. CREALITY has left this printer be an outcast. I just installed a SPRITE PRO EXTRUDER ON my ENDER 3 V2. Installed some great software that will take some LEARNING. If the SPRITE KEEPS printing the way it started, I may install a SPRITE IN THE SERMOON D1.
@dmax9324 Жыл бұрын
Have you added a chamber heater and other mods to this printer yet? Do you have plans to make a follow up videos?
@Milkex 2 жыл бұрын
Love your vids, I know you can look at a machine and come up with creative solutions to problems few others see. I would like your keen eye to do a few voron videos. Not building one or printing fast (further than showing capabilities), but doing that voodoo you doodoo so well in the modification department.
@koriyuhboi436 11 ай бұрын
I have a sermoon v1 and looking to change the extruder. The one on it is okay, but lacks proper cooling for bridging otherwise it prints great
@davidhofman4341 2 жыл бұрын
First move the front door hinge mount forward 5 to 5.5mm. Next make better filament flow. 1. fabricate a bearing filament roller that does not scrape the machine. 2. get rid of the v bearings and replace it with a swivel larger pulley with a removable pin for keeping the filament on the roller. 3. move the filament run out out to the center of the roll. 4. fabricate 2 clip on filament guides that have swivel top. Install a 8 to 10 inch ptfe tube to guide the filament.
@rheller_82 2 жыл бұрын
Nice mod master
@DropDeadFrederick 2 жыл бұрын
Question regarding reversing the extruder motor. What wires do you have to swap to reverse the motor? You said you reversed all of them but because the cable is black it's hard to see what wires were reversed. Is it as simple as just reversing the entire connection? For example, if the wires were numbered 1,2,3,4 would you reverse it by changing it to 4,3,2,1?
@properprinting 2 жыл бұрын
It's indeed as simple as that. If you want more in depth info about this, I dedicated a video on this subject kzfaq.info/get/bejne/abhipqiptd_Nn58.html
@Sttreg 2 жыл бұрын
AS per usual, i absolutely love your video combined with those timelapse ! However I have a question, how do you move so smoothly in fusion ? It's always a pain for me, and I feel like it's hard to actually move how I want to. I'm using simple logitech mouse like the g512 and the mx master 2s Also, what threaded insert are you using ? everytime i try using them, i feel like plastic is meling inside of it, making it unusable. I have yet to make a single usable threaded insert...
@properprinting 2 жыл бұрын
Thanks! I use a CAD mouse for it 3dconnexion.com/nl/product/spacemouse-wireless/ one you get used to it, you can't do without. It works in Blender too. I buy the inserts from Onkenhout, but this is a B2B company which only sells large quantities. I'm planning on selling them myself.
@Sttreg 2 жыл бұрын
@@properprinting Thanks a lot for the reply ! Also, how do you design the holes for threaded insert, like how much thinner do you make the holes for a M3 threaded insert for instance ? because that might be the source of my issues
@properprinting 2 жыл бұрын
@@Sttreg You're welcome! I use the measurements from this document www.onkenhout.nl/pdf/Multisert_zonder_kop/227/t/p it's Dutch though, but the pictures speak for themselves
@ETE-Design Жыл бұрын
Great Mod, how about BLTouch? Is there a mount for that, or can you makr it, I will use a Ender 3 Bracket.
@davidhofman4341 2 жыл бұрын
Rotate your Y axis stepper so that the plug points filament spool. Install an Adel clamp and stand off to the bracket above the Y stepper. Secure the cord tightly to the clamp. I blame the cord rubbing on the back panel for flexing the stepper connector. The Y axis started missing steps and disabling itself. When you went into manual mode and pushed the back and forth arrows, the stepper would fail within a few moves.
@properprinting 2 жыл бұрын
That's great advice and I did, but didn't show it in the video. You can see it in the thumbnail. I used zip ties through the slotted hole to secure the cable.
@dillanlein5108 2 жыл бұрын
Thanks!
@properprinting 2 жыл бұрын
My very first super thanks!, Thanks!
@MrHeHim Жыл бұрын
I'm about to pick one up open box for $275 USD 😁 looks to be a great upgradable printer! FYI, I've has the old wooden Replicator Dual (from 2012) and modified it over the years into a seriously good machine. And my recent printer has been a Duplicator i3, which I have also very modified. But it seems that everything was done slightly wrong on that one, everything.. I had to redesign at least 7 core components and flash it with Marlin to turn it into a printer every bit as good as a Prusa i3 😉 or better 😜 I haven't has to level the bed in Months!! Perfect 1st layer every time. Also got the one open box, if I'm going to go through it and modify it.. mights as well tear it down and inspect it. Ensuring there's nothing wrong with the open box purchase. With that said, adjusting the motor voltage IMO is necessary on a budget or hastily built machine. I do it while the machine is running a square and cylinder shape on the bed, then check min/max voltage on my multimeter. This ensures your not overheating your motors (necessary in an enclosed/heated printer) and that you also of course have enough voltage under load so it doesn't skip/shift.
@MrHeHim Жыл бұрын
So i picked one up a week after, i kept the carriage and modified the long throat by cutting it down to allow the same full metal micro swiss hotend BUT requires you to shim it because the throat hole is an odd size.. which i did with a copper sheet wrapped around it (very carefully. It's now a true fully metal hotend. Also fixed another major issue, modified so both carriage/heat-break fans to always run AND designed fan ducts so the lower fan doesn't invariantly cool the part when you don't want it too but also help cool it FAR better. The carriage was alarmingly hot at over 100c before and how when printing large prints at 260c for hours With a cover on top to hold the warm air it's just 5-10c over ambient temp I can easily print 200mm/s 1000 acceleration as my daily setting but anything faster and i start seeing buffer artifacts while also clearly needing linier advance Although NO ghosting what so ever. I think im going to run Klipper on a old laptop i have laying around or might get Creality's new Sonic Pad.. but it's $150 so idk. Going to see if i can convert a old android tablet for Klipper
@ameliabuns4058 2 жыл бұрын
god the intro is so true. I designed my Doot Changer with the actual printer I had (hevo) and only kept the frame, boy was it a nightmare, everyday I was holding broken/bad components together with a janky bad fix or glue to make it function well enough to print the replacement, would NOT RECOMMENT. it made me cry ;-;
@properprinting 2 жыл бұрын
I feel your pain, been there xD
@marckthygesen4616 Жыл бұрын
did you ever make at better fan duct to the sermoon d1? or another vision ?
@CC-kc5lb 2 жыл бұрын
I have a mosquito liquid and DD on linear rails with e5plus yes it fits
@pringineer1027 2 жыл бұрын
But hot damn is that printer a pile of classic creality engineering. Seems like they have not learned anything at all
@properprinting 2 жыл бұрын
It feels like the esthetics department had the lead on this one xD
@duality4y 2 жыл бұрын
waarom moet ik altijd zo hard om je lachen :D
@chicagoal3731 Жыл бұрын
What size/part number bearings do I need to buy for the rod?
@AlternateRC 2 жыл бұрын
any plans for a dual extruder Sermoon D1?
@Chris623 2 жыл бұрын
15:00 i know that feeling ^^
@Wally711978 2 жыл бұрын
ben gelukkig niet de enige waarbij alles valt. Sinds ik 3d print lig ik meer op de grond om dingen weer op te rapen dan ooit. Leuke video's
@properprinting 2 жыл бұрын
Bedankt! Ja gravity is a bitch 🤣
@samtny1 2 жыл бұрын
hilarious, fun to watch
@chicagoal3731 2 жыл бұрын
What are the make=models of the fans we need yo buy? From Amazon? Link?
@Neo-fb5ry Жыл бұрын
Can you fit a twin extruder to this 3d printer like in the snapmaker artisan
@madeintexas3d442 2 жыл бұрын
All I want to know is how many times did you grab the wrong size allen key during this project?
@properprinting 2 жыл бұрын
Exactly two times and I managed to capture both of these rare events xD
@Neo-fb5ry Жыл бұрын
I have the same printer i want to upgrade the print head to twin/dual extrusion the one that doesnt switch it is just two hotends next to each other, but i literally have no idea how to do it. There are such extruders on the market available for purchase but i literally have no idea how i can do it. Would you take it as a challenge? Kind regards
@felipenavas 2 жыл бұрын
Could you make a special with ABS tips for functional parts? I am getting a big elephant foot of several layers trying
@properprinting 2 жыл бұрын
I basically print it similar as with PLA with the difference of the temperatures, an enclosed or heated chamber and a brim. I print the first layer at 100% flow rate at the same height as the rest. This reduces the bed adhesion, but I get away with it mostly.
@pringineer1027 2 жыл бұрын
I can also add that a PEI surface works wonders with abs while the glass beds tend to be not ideal. Elefants foot has more to do with too close first layer than material
@felipenavas 2 жыл бұрын
My elephant foot have like 5 layers. Like the foot got melted down. My bed is 100C, Nozzle 235C and I print inside a tent around 40C-50C with fans off. I am printing on PEI
@felipenavas 2 жыл бұрын
@@properprinting fans on?
@properprinting 2 жыл бұрын
@@felipenavas with small parts yes, but mostly not
@TruongTrn Жыл бұрын
Please give me an advice, between Ender 5 S1 and Sermoon D1, which is better choice (about build quality, and capability use for many another purpose), I’m beginner, thanks.
@properprinting Жыл бұрын
Although I don't have experience with the Ender 5 S1, I'm pretty sure that this is the better choice. I upgraded the Sermoon because I really dislike the extruder which is basically the most important part of a printer.
@TruongTrn Жыл бұрын
@@properprinting Thanks for your advice, I will consider Ender 5 S1 for my first 3d printer.
@SplitPhotography 2 жыл бұрын
Nice. But dont understand why you go from the round bars, to the 2020's. Aren't the rods more smooth and good in the long run?
@properprinting 2 жыл бұрын
I did that because many standard hotends can be placed on it easily. For some reason this runs a lot smoother than the stock rods, but I recon that this shouldn't be the case. I'm also able to add my rocker to it now where I won that contest with :D
@SplitPhotography 2 жыл бұрын
@@properprinting okey. But why not only make an hotend adapter on the stock rods?
@properprinting 2 жыл бұрын
@@SplitPhotography if I'd do that I wouldn't be able to add the Microswiss hotend, nor my rocker system for instance. These rods don't run smooth and you can still add a hiwin rail if you don't like those V-slot wheels. For me it's mostly about the added possibilities now.
@fisheye3d1727 2 жыл бұрын
They never advertised it as a full metal hotend, They said full metal extrusion.
@sndrb1336 2 жыл бұрын
Why not dual rails on the gantry ?
@Torskel Жыл бұрын
Should I buy this ? Im looking for a cube-printer either Cartesian built like CoreXY or just a CoreXY
@properprinting Жыл бұрын
No, there are better machines out there. I've heard great things about the Bambulab X1. That's more expensive though. I also think that you're better off with an Ender 6 or similar.
@robson668 2 жыл бұрын
You ordered the silicone heater from Rat Rig i saw, does this mean there is a Rat Rig build in the pipeline?
@properprinting 2 жыл бұрын
I bought that for this printer, but I'm not sure if I'll end up using it for it. I don't have a plan yet xD
@zarg2289 10 ай бұрын
Are v slot wheels not less accurate than using linear rods would it not have been better to adapt the microswiss to use the linear rods
@properprinting 10 ай бұрын
Good question. I don't think it matter much and the advantages V-slot wheels have, that it's a lot easier to add after market extruders to it, outweighs the disadvantages in my opinion.
@zarg2289 10 ай бұрын
@@properprinting very fair, as long as there isn't flat spots I doubt it will be too noticeable
@willmeyers9602 Жыл бұрын
dude where do you get heat inserts for thin walls like that?
@properprinting Жыл бұрын
From Onkenhout, which is a B2B supplier. I haven't found them elsewhere unfortunately. They're expensive and therefore I suggest to use regular nuts.
@jarrenvanman2570 2 жыл бұрын
Those heat set inserts were just sexy!
@christophersmith108 2 жыл бұрын
Just on your point concerning the touch display being behind the front doors, these doors are doubly useless because the “enclosure” has no top. Any hot air will simply rise up out of it, doors or no doors, taking the fumes with it!
@karipenttila2655 2 жыл бұрын
What was the print speed, looks quite slow.
@cuien686 2 жыл бұрын
i also just bought a sermoon d1 3d printer and am also having problems with the z-pillar not sure if i should do the same as you
@properprinting 2 жыл бұрын
It's non destructive, so you can always try it and go back if you don't like it ;)
@cuien686 2 жыл бұрын
@@properprinting can you share the file you printed the blower kit for the printhead, my friend has gmail
@properprinting 2 жыл бұрын
@@cuien686 it comes with the download properprinting.pro/product/sermoon-d1-y-axis-upgrade/
@cuien686 2 жыл бұрын
@@properprinting Why can't I see your file?
@properprinting 2 жыл бұрын
@@cuien686 it should come with the download. If the download has failed you can try again and if you enter an amount of $0,- you can download it for free.
@rafael.s 2 жыл бұрын
Now that's a proper late upload
@properprinting 2 жыл бұрын
First time planning a video and it should've been live at 2pm😅
@rubendariovelez 2 жыл бұрын
for the next cable swapping thing, you just need to change only tow cables of the same coil.
@properprinting 2 жыл бұрын
True, I dedicated a whole video about that. Just swapping all of them is less confusing, thus safer ;)
@split3d610 2 жыл бұрын
Finaly. It's been weeks man....
@properprinting 2 жыл бұрын
I think you've missed a video ;) But yeah, I've had some delay but I'm back! :D
@NicksStuff 2 жыл бұрын
Now that you can print TPU.........you're gonna have to print the tires to go with your plastic rims ;-)
@richardbruckner8913 2 жыл бұрын
So nice to see you not become a Shill after winning the award. I was thrown out and banned from every Creality Facebook page for calling out their Shills and I own 8 Creality printers and have helped more people to get their CR6-Se operating properly after the kickstarters arrived..... Go figure.
@bigfilsing 2 жыл бұрын
" Eerst effe koffie" the most used dutch phrase before midday
@boerobdam 2 жыл бұрын
je bent lekker bezig ziet er allemaal goed uit . heb je al eens gedacht om een voron 2.4 te bouwen en daar mods voor te ontwerpen ? mvg nick
@properprinting 2 жыл бұрын
Bedankt! In een van mijn eerste videos had iemand een comment achtergelaten over de Voron en sindsdien heeft dat wel altijd in mijn achterhoofd gezeten. Ik denk toch dat ik liever zelf een printer volledig van scratch een keer ontwerp en maak zodat ik dat ook eens ervaren heb. Ik sluit de Voron zeker niet uit, hele gave printer!
@boerobdam 2 жыл бұрын
ik ben zeker benieuwd hoe die printer er dan uit komt te zien . ik heb zelf een voron 2.4 en ben er zeker blij mee . ik hou alles van je goed in de gaten wou dat ik ding zo kon ontwerpen als jij doet
@chasgiv4 2 жыл бұрын
What is your aversion to PETG? I notice you never print with it.
@RubixB0y 2 жыл бұрын
Stringy, oozy, hygroscopic, gets all over the nozzle, harder to post-process, bed adhesion often too bad or too good Edit: But I'd love to hear his thoughts as well.
@felipenavas 2 жыл бұрын
Less heat resistant and also deforms under constant load
@chasgiv4 2 жыл бұрын
@@RubixB0y he prints indoors right? Doesn't abs emit fumes and higher amount of toxins vs petg?
@chasgiv4 2 жыл бұрын
@@felipenavas all plastic deforms under constant load. Either by breaking or bending.
@properprinting 2 жыл бұрын
I printed a lot with it in my older videos. All blue parts are PETG. It's not that I don't like it, but I like Nylon and polycarbonate a lot. The reason why I print so much with ABS is because I received a lot from 3D4Makers for that rim. I use ABS for that rim because it can already tell a lot about the performance of my printer (for printing Nylon and polycarb) and it's affordable.
@Techknowdude 2 жыл бұрын
15:00 this is me working on my printer every time. I Need magnetic fingers or something.
@scott5017 2 жыл бұрын
Creality should just pay you to design a printer 🖨
@richardhulshof7115 2 жыл бұрын
why you should listen to me?...I'm the chief modification master PUNT ....epic lol
@winandd8649 2 жыл бұрын
ABS printen met een part cooling fan? Ik print al 6 jaar enkel in ABS en heb dat nog nooit gedaan, en nooit een reden voor gehad. Misschien kan het wel helpen met overhangs..? eens overwegen of ik een fan kan installeren op mijn printer 😆 Noot; Ik denk dat je hotend ook temperatuur iets te hoog stond voor het type ABS dat je gebruikte.
@cozmo4694 2 жыл бұрын
The thought of a reliable 3d printer scares me...
@glabifrons 2 жыл бұрын
What happened to your award?! (0:25)
@properprinting 2 жыл бұрын
twitter.com/properprinting/status/1413169856753586176 fortunately I already received a new one, but that was after that recording xD
@klschofield71 2 жыл бұрын
You are the Jonest Jon of all the Jons, Chief Modification Master from C-137. If you had a kitten it would probably squanch in your printer, so it's good you don't have one.
@hondaguy9153 2 жыл бұрын
It has an enclosure and no top? WTF?
@properprinting 2 жыл бұрын
Just like an Ultimaker xD
@potatofarmer 2 жыл бұрын
Wild I have this printer and my only peeves with it was that all the stock slicer material and retraction settings were for a ender 3, and the dual bearing filament feed setup sucks and jams. Guess you missed those, judging by how clean the hot end was you really did not use it much. Once converted the stock feed to reverse bowden, and fixing the slicer settings been having a great time with the stock hot end. Only other fixes are firmware related, never have to open the doors it just works.
@aterxter3437 2 жыл бұрын
Is it a joke ? A core xy printer with a direct drive extruder ? The main point in having a core xy printer is to lower the mass accelerating to get faster accelerations with the same torque (F=m*acc) needles to mention the problem of jerk (derivated of the accelerations which can't be infinite, if you prefer that way, you can't switch from 0m/s^2 to 5m/s^2 in no time you need to accelerate progressively.
@properprinting 2 жыл бұрын
This is not a joke, neither a core XY printer
@otohudak5675 Жыл бұрын
Why make something simple when you can make it complicated. All you needed was to change/modify the heatbreak and get rid of the Teflon tube. You replaced the linear guide with a V slot, which is the biggest step backwards. I don't think this is a good way to go.
@properprinting Жыл бұрын
Thanks for your input. The V slot is just a lot easier to work with and adds more possibilities.
@jessedegraaf4094 2 жыл бұрын
Hahaha eve die mooie Nederlandse tering
@romanlanger2295 Ай бұрын
Upgrade achieved by replacing linear bearings with aluminium profile with wheels? Hmm... 🙄
@properprinting Ай бұрын
Now it fits most extruders, which is a bigger advantage than the slight disadvantage of that linear rail
@jacksoni349 2 жыл бұрын
So basically don't buy the Sermoon D1 haha
@properprinting 2 жыл бұрын
Without this mod it's a nice storage space with those doors xD In all honesty I would only buy it if you like the looks and are willing to modify this printer. A lot of people don't mind spending hours modding their Ender ;) But, out of the box this printer did dissapoint and you can get more bang for your buck I think.
@pringineer1027 2 жыл бұрын
@@properprinting i find especially the choice of display placement very weird :D
@properprinting 2 жыл бұрын
@@pringineer1027 that makes two of us xD
@tablatronix 2 жыл бұрын
wtf is a sermoon D1? Geez I am out of the loop
Marusya Outdoors
Рет қаралды 220 МЛН
Make With Tech (MakeWithTech)
Рет қаралды 27 М.
spline
Рет қаралды 357 М.