Create gothic style windows using the spin tool

No video

Create gothic style windows using the spin tool

Рет қаралды 28,539

Күн бұрын

This video covers the basics of using the spin tool as well as tips and trick on how to use it efficiently combined with booleans to create gothic style windows.
Shear tool/Window Frame video: • Using the shear tool t...
Creating pipes and handles video: • Creating pipes and han...
SUPPORT THE CHANNEL BY BUYING SOME STUFF YOU WERE GOING TO GET ANYWAY ;p
Sculpting
Budget tablet: Veikk A15 V2 - amzn.to/3t4sFHZ
Mid end graphic tablet: Wacom Cintiq 16 - amzn.to/3Jz1cVa
Wacom Cintiq 16 with stand - amzn.to/3Jotp10
High end graphics tablet: Wacom Cintiq 16 Pro - amzn.to/3GS6tWb
3D Printing
Elegoo Grey resin - amzn.to/3uPiTvI
Anycubic Photon Mono X (large printer): amzn.to/34PiOgN
Anycubic Photon Mono 4k (smaller printer): amzn.to/3BpOogW
Anycubic Wash and Cure (large): amzn.to/3H1kb9u
Anycubic Wash and Cure (small): amzn.to/3BoXxXl
Nitrile Gloves: amzn.to/354xvfX
Isopropanol Alcohol: amzn.to/3LDlrmq

Пікірлер: 60

@ft7397 2 жыл бұрын

dont understand why this channel have so few comments and views. its one of the best blender channel

@ArtisansofVaul 2 жыл бұрын

Its all the joys of algorithms.... I probably need to work out how to "play" the mechanics of KZfaq better but that seems like time I could be spending doing 3D design.

@donosterman107 2 жыл бұрын

I rarely comment on videos but I genuinely don't understand the lack of comments and views on this man's channel. He provides such detailed explanations and offers answers to questions I haven't even had yet in addition to one's I thought of but didn't full research. He thinks as the viewer. It's really impressive!

@GenuineHeals Жыл бұрын

the pinnacle of blender tutorials. just wonderful.

@ArtisansofVaul Жыл бұрын

Thanks so much man 😁 Hight of praise 👍🏻

@cancan8186 Жыл бұрын

great job man. keep bringing us such helpful stuff. you are amazing!

@ArtisansofVaul Жыл бұрын

Thanks so much 😁

@BJamesThompson Жыл бұрын

Omg, this and your other window tutorial are AMAZING! I'm new to Blender but I think I'm getting it! I can't tell you how much I appreciate the time and quality in making this video! 😊😊 Super clear and thorough. You are amazing. New subscriber!

@ArtisansofVaul Жыл бұрын

Thanks for subscribing and I'm glad you're finding the videos helpful. Blender is such a great program and it's awesome to hear the videos are helping people get into it.

@MrCrazymmogamer 2 жыл бұрын

Another amazing tutorial!

@ArtisansofVaul 2 жыл бұрын

Thanks so much! It's such a great tool.

@user-gv9hd2fi5h 8 ай бұрын

Great tutorial! Thank you!

@ArtisansofVaul 8 ай бұрын

My pleasure. Thanks for taking the time to comment, it's really appreciated 😁👌🏼

@ft7397 2 жыл бұрын

thanks for tip about face orientation

@Death-Flower Жыл бұрын

Amazing!

@ArtisansofVaul Жыл бұрын

Cheers 😁

@embacherjames 2 жыл бұрын

Thanks!

@Greenman4890 2 жыл бұрын

Thanks never knew about the spin tool

@ArtisansofVaul 2 жыл бұрын

Yeah it seems like something that should be more obvious. That and the shear tool because favourites of mine as soon as I discovered they were there.

@rodolflum3444 Жыл бұрын

the window boolean cutter you can bevel so you dont need to use a cube to boolean the cutter again. you can also used symmetrize in sculpt mode. and avoid the error using the mirror tool.

@ArtisansofVaul Жыл бұрын

That's very true. Sometimes it's nice to mirror so that future changes will also be mirrored but you can definetly do as you have said.

@3Dobsesifi Жыл бұрын

good tutorial

@ArtisansofVaul Жыл бұрын

Cheers.

@G3neric_User Жыл бұрын

Came here looking on how to make a curve, instead I got an entire tutorial on exactly what I had wanted to do.

@ArtisansofVaul Жыл бұрын

😁 Great to he able to help you

@dwanediblie 2 жыл бұрын

Just curious, is there a reason you are not using bisect when using the mirror modifier? I feel like I am missing something as to why not. Loving your work by the way. Really helpful. Especially the callout of shortcut keys. I can never follow along with the onscreen keystrokes that most others use.

@ArtisansofVaul 2 жыл бұрын

Thanks a lot. I think that was just me in a rush to be honest. The bisect option would be the way to go to make everything a bit quicker/have less issues.

@codewarrior145 Жыл бұрын

Watch on 1.75x speed because of slow pace all in all great video and channel. Keep the good work.

@ArtisansofVaul Жыл бұрын

Thanks. I'd say explaining the why it more important than just showing how so it can be applied to other situations but you're welcome to watch at whatever speed you like and on mute if you prefer 🤣 It is one of my older videos so hopefully they are a bit more time efficent now, but I think that explanation element will always be part of my videos (so sorry if it annoys some).

@franzmarley Жыл бұрын

@@ArtisansofVaulthink it's great to see a few different ways you could do stuff, thanks

@wilsonwilson3674 Жыл бұрын

16:49 - would it be easier to just select 'bisect' and 'flip' in the mirror modifier? I believe it does the same thing and might save you some steps. Fantastic tutorial btw!

@ArtisansofVaul Жыл бұрын

That would definetly work as long as the origin is in the right place 👍🏻 And thanks 😁

@wilsonwilson3674 Жыл бұрын

No problem. Also, I just noticed that somebody mentioned this long before I did, lol my bad.

@gregq8 Жыл бұрын

Thanks, I was trying to do the gothic arches with proportional editing and then inset but I couldn't get it to look how I wanted and the inset and bevel would go funky around the point of the arch - I will try this method instead.

@ArtisansofVaul Жыл бұрын

I had exactly the same initial thought as you and in thr same way I kept finding it had issues. Let me know how it goes!

@gregq8 Жыл бұрын

@@ArtisansofVaul It went great, I finished the "windows" and uploaded the result under "40k Rhino alternative Headlights (Baneblade edition)". You can see my awkward attempts at arches in an older set of headlights from a year ago, these are much better. Thanks again!

@jaymassey7931 Жыл бұрын

So good, thank you. Quick question: will the intersecting faces (where the columns intersect with the window frame) be an issue with printing? Would a union bullion be beneficial for that or do we just let the slicing software handle it?

@ArtisansofVaul Жыл бұрын

You would definetly want to boolean everything together before printing and then cleanup as normal.

@wilhelmeniabilliedoherty5917 2 жыл бұрын

Possibly a silly question, but what's the difference between mirror and symmetrize? When would I want to use one over the other

@ArtisansofVaul 2 жыл бұрын

Not a silly question at all. So symmetrize is a one off event that copies one side to the other. That means you could then change one side but it wouldn't change the other (unless you symmetrized again). A mirror is a modifier so it stays active so anything you change continues to be automatically changed on the other side as well.

@wilhelmeniabilliedoherty5917 2 жыл бұрын

@@ArtisansofVaul Oh! That makes sense, thank you

@scarletshadow8495 Жыл бұрын

Vaul is my Surname!!😄

@ArtisansofVaul Жыл бұрын

That's pretty cool! Do you know the origin of the name?

@scarletshadow8495 Жыл бұрын

@@ArtisansofVaul hi, I have no idea of its origins, can only trace family tree back to tha late 1890's. I do know there's an Island on west coast of Scotland, think it's called Tiree or Tyree which has a village/small town called Vaul. My Bro went there years ago. It's an unusual name So how come you is ArtisanofVaul??

@Hurtone 2 жыл бұрын

My computer really starts freezing up when I use booleans. I suspect it is because I use really low poly modelling and subdivision surface (lvl3).

@ArtisansofVaul 2 жыл бұрын

Yeah, I found the same thing. I found that it had much less issues when the sub-D was applied or I just used other methods to smooth everything off (like using bevels over sub-D where possible. But I realise that isnt possible for everyones workflows.

@ft7397 2 жыл бұрын

i also use really low poly. with subd . my pc is not good either. but generally it dont freeze. noticed it tend more to have hard time when using booltool

@Gabriel-hh1pw Жыл бұрын

Wouldn't it be easier to make a 180° arch and use proportional editing set to root and drag up from the middle part? I used this to model a whole gothic cathedral and it tales just seconds

@ArtisansofVaul Жыл бұрын

That would work too for sure. But it could result in certain proportions of the arch being different in thickness as if stretches I think. But it depends how exact you want to be

@Gabriel-hh1pw Жыл бұрын

@@ArtisansofVaul I just use a semicircle and then extrude it, or convert it to a curve and use the custom profile

@tylerscott3192 5 ай бұрын

Where is part one of this video showing the "cutter" and everything else?

@ArtisansofVaul 5 ай бұрын

I mean if someone looking up how to create a boolean I think this video is a bit far ahead for them...

@tylerscott3192 5 ай бұрын

@@ArtisansofVaulI was just looking to start right from square one with the sculpting and everything

@ArtisansofVaul 5 ай бұрын

@tylerscott3192 👍🏻 Unfortunately it's not viable to do that on every video that focus on a specific skill but I have a number of videos thay do look on creating an end result that do show a workflow from start to finish. If you're relatively new to Blender the playlist on creating a base might be a good place to start: kzfaq.info/sun/PLnqmLZKRm5CYlRZ6rjHT_eUKcJVC9FFhv&si=3pAuKaXP57qGYWBs

@tylerscott3192 5 ай бұрын

@@ArtisansofVaul gotcha! Thank you for all of the great videos

@ArtisansofVaul 5 ай бұрын

@tylerscott3192 My pleasure. If there is a specific thing that you're looking to do that isn't there do feel free to comment and hopefully I can point you in the direction of another video that will cover it.