Critical tips when spraying silver with PPG WATER

No video

Critical tips when spraying silver with PPG WATER

Рет қаралды 32,725

7 жыл бұрын

IF YOU GET ANYTHING FROM MY VIDEOS PLEASE BUY SOME HOODIES,T-SHIRTS AND MORE HERE! www.motivatedpainters.com
Watch some white pearl tips here!
• White Pearls & MORE! m... I used my Tekna prolite 1.3 te20 cap at 25 psi for sealer
Tekna basecoat for base 18 and 15 for control coat
Fan wide open 1.3 fluid 😀
Iwata WS 400 13hd for clear at 35 psi
The car is spray masked 😀
WATCH ME PAINT MY FIRST BMW I8 PAINT JOB
WATERBASED TWO TONE"
kzfaq.info?v=xZx...
~-~~-~~~-~~-~
MOTIVATEDPAINTERS@GMAIL.COM
**********
BLOWER
***********
IF YOU NEED ONE OF THE BLOWERS LIKE THE ONE I USE YOU CAN PURCHASE ONE FOR $25 USD, SHIPPING ON ME! EMAIL AT MOTIVATEDPAINTERS@GMAIL.COM
IF YOU TYPE IN THIS HASHTAG #motivatedpainters on youtube you will be able to see ALL MY VIDEOS!! CHANCES ARE YOU HAVEN'T SEEN THEM ALL AND I KNOW THAT YOU WILL GET TONS OF VALUE FROM LOOKING THROUGH THEM!
IF YOU ARE NOT FOLLOWING ME ON INSTAGRAM YOU ARE MISSING OUT!!!! JOIN ME ON INSTAGRAM: / motivatedpainters
MOTIVATED PAINTERS AS IS WOULDN'T BE POSSIBLE WITHOUT www.buddscollision.com which is where I have worked for a decade now!
SUBSCRIBE TO MY KZfaq CHANNEL: kzfaq.info/love/tiv...
ADD ME ON SNAPCHT: gabriel.merino / gabriel.merino
SUBSCRIBE TO MY KZfaq CHANNEL: kzfaq.info/love/tiv...
JOIN ME ON LINKEDIN: / gabriel-merino-70488384
JOIN ME ON TWITTER: gabrielmerino90?l...
Camera 1 : amzn.to/2swsgfQ
Camera 2 : amzn.to/2utWcdX

Пікірлер: 118

@ThisIsTheRealMe2 7 жыл бұрын

Great video Gabe! A lot of good info and talk-through. Thanks!

@MOTIVATEDPAINTERS 7 жыл бұрын

+Mike Mccloskey thank you!!!!!

@davesage9190 7 жыл бұрын

I wish it was as easy as you make it look. Lots of take away tips there. Great job. Thanks

@MOTIVATEDPAINTERS 7 жыл бұрын

+Dave Sage haha it is!!!! Just keep trying!! 😀 hope the videos helps!!!!

@dimitridam1249 7 жыл бұрын

Nice vids..it helps a lot..thanks gab..

@sealisland1 7 жыл бұрын

I've been utilizing the spray into the repair method and it's been a tremendous help! Great tip! I'm enjoying your vids. Keep it up.

@MOTIVATEDPAINTERS 7 жыл бұрын

+Kent Buehrer wow that means so much to me thank you thank you!!!!!!!!

@anthonypeinadoify 5 жыл бұрын

Wat is spraying into repair method

@MOTIVATEDPAINTERS 5 жыл бұрын

Watch the video

@aesthetic_mfr 4 жыл бұрын

I learned a lot man and you're a good teacher. I'm getting a crash course this evening. Thanks for putting this video together.

@MOTIVATEDPAINTERS 4 жыл бұрын

Amazing! Thank you!

@gwecho1613 3 жыл бұрын

Love you Gabe! 💙

@danielgill9846 7 жыл бұрын

Nice Job Gabriel! Got a silver to paint myself soon, not looking forward to it after hearing from so many painters that it is quite possibly one of the hardest colours to paint right, but your videos on silvers are giving me a bit of hope! Thankyou :D

@MOTIVATEDPAINTERS 7 жыл бұрын

+Daniel Gill you are going to kick butt man your going to make it happen you'll see!!!! Study up here and go get it!!!

@spraym88 4 жыл бұрын

Great job man. Awesome video as well. New to the Water based world

@MOTIVATEDPAINTERS 4 жыл бұрын

Hope they help !

@andersonrowland 7 жыл бұрын

Great video! Thanks for your time.

@MOTIVATEDPAINTERS 7 жыл бұрын

+Rowland Anderson thank you so much brother!!!

@mk1eski 7 жыл бұрын

great video very helpful tips thank you

@jasonevans6720 7 жыл бұрын

Great one Gabe

@MOTIVATEDPAINTERS 7 жыл бұрын

+jason evans thanks my bro =

@tylerwilloughby448 Жыл бұрын

You can also do a reverse blend and it makes a huge difference only do this with silver.

@allstarchris7299 7 жыл бұрын

Hey Gabe. Love your videos. I am a new painter and the tips have been very helpful. Can you do a video on finding the sweet spot when spraying clear coat with any gun. That would have a lot. Keep up the great work!

@MOTIVATEDPAINTERS 7 жыл бұрын

Hey +AllStarChris thanks so much!! I talk about it on many videos but I will try to make one specific for it! Thanks so much for the support

@michaelortiz5382 7 жыл бұрын

Nice vid! Man details details! Make in my opinion great vids for newbies like myself. Appreciate you. explaining everything like sealer, gun in use w/ psi settings👍. BTW whats spray mask?

@MOTIVATEDPAINTERS 7 жыл бұрын

+Michael Ortiz thanks!!!! Spray mask is a liquid that is sprayed on the car to protect it from over spray

@flipmode155 Жыл бұрын

Hey mate great video as always, what sealer are u using? Have issues here both with deltron solvent and envirobase laying down chunky or grainy over our sealer, Never had issues like this in the past but now at a ppg shop it’s a big struggle, the sealer and base are the worst of enemy’s rather than best of friends?

@killadelphia215 5 ай бұрын

Have you done a video on tinting and matching paint? I need to learn that

@ramilyes 4 жыл бұрын

Gab, I wish to have spray gun like you

@alejandromagana8727 7 жыл бұрын

hey Gabriel thanks for taking the time to do all these great videos. I have a question.Second coat of clear, do you wait a few minutes before baking it?or do you bake it right away?thanks.

@MOTIVATEDPAINTERS 7 жыл бұрын

+Alejandro Magana I walk out of the booth and I kick it on bake 😀 thanks for the nice words!! 😀😀😀

@eddielugo8541 7 жыл бұрын

nice!!!

@georgizlatinov5039 7 жыл бұрын

Very nice work

@MOTIVATEDPAINTERS 7 жыл бұрын

+Georgi Zlatinov thanks my brother,!!!😀😊😀😊😀

@georgizlatinov5039 7 жыл бұрын

you are welcome my friend

@user-bt7mr9kw7q 5 ай бұрын

Everytime I have to blend silvers I always get blotchyness any idea why? Spraying ppg as well

@Fjoffroad 4 жыл бұрын

Hey buddy!!! Awesome channel. I have 2 questions bud! How much trigger do you usually use on your tekna Pro-Lite spray gun for your silver base coats or any base coat and how much trigger for your clear gun? I have the same clear gun and I love it but when I heard you spray st 35 psi I was like woah! The most I have used mine is 29 psi but I see your freaking awesome at what you do and I want to experiment with your tips bro 🧡🧡🧡

@MOTIVATEDPAINTERS 4 жыл бұрын

With Tekna you don't need to spray at higher than 29 that's fine I usually have the trigger wide open just turn a little bit in like one turn

@Fjoffroad 4 жыл бұрын

@@MOTIVATEDPAINTERS thank you bro! I tried my clear gun at 35 pounds and I was amazed how every job came out !! Your freaken awesome man! I will keep watching your videos !! I just ordered a tekna too! Currently using entech 1.3 love it but always willing to experiment ;)

@jeffreythornton1788 7 жыл бұрын

hey I like your videos even though I paint with axalta chromax pro... that code is 38p by the way. I find it looks long and complicated with ppg. with chromax it's 1 and a half coats wet on wet and done and clear is 2 coats wet on wet so basically you go in the paintshop twice...

@MOTIVATEDPAINTERS 7 жыл бұрын

+jeffrey thornton yeah it seems to be simpler with axalta , never sprayed it yet. We use ppg here so that's what I make the videos on 😀 I really like the color matching on ppg personally. Thanks for the support maN!!!!!

@user-su5fc1ld9i 26 күн бұрын

Damm you don't even bag the car lol. That downdraft must work insanely well

@chuckthomas1913 7 жыл бұрын

Hey Gabe! do you ever use one of these various blending products (which are basicly transparent basecoats) that are supposed to help the metallics to orientate more evenly? I think that silver is less tricky if it's laid into a wet bed. To prevent swirls and such it sometimes requires fanning out so far that the coat goes down too dry. Great vid! :)

@MOTIVATEDPAINTERS 7 жыл бұрын

+Chuck Thomas hey brother !!! Yes sometimes I do! Like on this video kzfaq.info/get/bejne/i7lloqaDqJioYmQ.html but I have found that if you use good gun control it's not necessary but sometimes it doesn't help 😀😀😀

@redbach23tube 7 жыл бұрын

Hey Mr. consistent Gabe, when you do your double control coat does it feel like overspray or a bit sandy to the touch? do you put another coat of silver after or straight to clear.?

@MOTIVATEDPAINTERS 7 жыл бұрын

+redbach23 haha that's like the ultimate compliment! Yeah it's going to feel a bit grainy , the control coat should be your last coat of base before clear.

@bobcat3141 5 жыл бұрын

Super good video Gabe good stuff... hey say for spraying water vs solvent to do control coats.. would you go bout it same idea ur is bit different

@MOTIVATEDPAINTERS 5 жыл бұрын

Honestly I would do them the same way! But I don't spray solvent so I'm not the greatest

@bobcat3141 5 жыл бұрын

So would the pressure stay the same also.. another quick one.. if I'm doing double drop so rite after the first you go at it again ur.. n correct me if I'm wrong is it 75 % overlap on base. N then clear coat also the same thanks so much..

@MOTIVATEDPAINTERS 5 жыл бұрын

Yes sir !

@P3mpi 6 жыл бұрын

Great vid mate. How much overlap do you use when spraying the hood? Sometimes a i get stripes

@MOTIVATEDPAINTERS 6 жыл бұрын

+P3mpi hey brother thank you very much you should pay attention to your gun see if its dirty stripes are not so much created by the overlap but by the fan of the gun and not enough coverage. I try to do 75%

@P3mpi 6 жыл бұрын

MOTIVATED PAINTERS thnk u for replying gabe. u mean like the holes are clogged?

@MOTIVATEDPAINTERS 6 жыл бұрын

+P3mpi yeah it it's dirty overall inside

@justcoke1 6 жыл бұрын

What kind of wax and grease remover do you use when you clean the cars?

@MOTIVATEDPAINTERS 6 жыл бұрын

It's called clasco prime wash

@sergionunez2278 7 жыл бұрын

hola máster pregunta veo que empapelaste pero no todo el auto usas enmascarante líquido. saludos

@MOTIVATEDPAINTERS 7 жыл бұрын

+sergio Nuñez jajajaj yo máster ¿¡¿ 😂 gracias! Si el carro tiene enmascarante liquido 😀

@vasiliskaradimos 7 жыл бұрын

Hi Gabriel...super video as always...which is your gun setings on the pro lite for base?

@MOTIVATEDPAINTERS 7 жыл бұрын

+Vasilis Karadimos hey I currently don't use my prolite for base! I'm not a big fan of it for base. But I would use the same settings I have on it now te20 cap 1.3 😀

@vasiliskaradimos 7 жыл бұрын

MOTIVATED PAINTERS Dont you paint with the prolite on this video?Sorry if i am wrong...i mean settings at fun and fluid...

@MOTIVATEDPAINTERS 7 жыл бұрын

+Vasilis Karadimos no I use tekna basecoat gun 😊 like I said on the description 18 for base and 15 psi for control coat . Fan wide open 1.3 fluid 😀

@vasiliskaradimos 7 жыл бұрын

MOTIVATED PAINTERS Thanks man!

@MOTIVATEDPAINTERS 7 жыл бұрын

+Vasilis Karadimos 😀

@Arnoldzesati889 6 жыл бұрын

Hi Gabe is that masking paper or plastic? The blue material you use to cover. All I have access to here where I live is butcher paper or newspaper. What do you recommend. Thanks brother

@MOTIVATEDPAINTERS 6 жыл бұрын

They both work. We use spray mask so we can use the blue paper you seem but if you don't have spray mask use plastic to cover the whole car

@Arnoldzesati889 6 жыл бұрын

MOTIVATED PAINTERS thank you very much my friend

@gotzz84 5 жыл бұрын

Shouldn't fender on the other side be blended too? I'm a beginner so that blending thing confuses me :)

@MOTIVATEDPAINTERS 5 жыл бұрын

Yes but insurance didn't pay for it

@eddielugo8541 7 жыл бұрын

i have you on instagram love your videos man keep it up brotha!!

@MOTIVATEDPAINTERS 7 жыл бұрын

+Eddie Lugo thank you thank you thank your thank you thank you thank you!!!!!

@briansanders4932 5 жыл бұрын

Gab. let me know where I can get the blow gun. thank you......

@MOTIVATEDPAINTERS 5 жыл бұрын

Motivatedpainters.com 😍😍😍😍

@victorramirezvr69 6 жыл бұрын

Hi gabe, I wanna know about your mask, I love my beard but I can't let it grow because of the regular masks

@MOTIVATEDPAINTERS 6 жыл бұрын

+Victor Ramirez it's a sata vision fresh air mask is think it's the only way anyone should be painting so it's connected to an airline with the three stage filter

@mamukaberulashvili4093 7 жыл бұрын

devilbiss base te10 ili hv30 . chao

@genocidejoe523 7 жыл бұрын

is it the same for solvent based paints?

@MOTIVATEDPAINTERS 7 жыл бұрын

+Genocide Joe no idea I don't spray solvent 🤤🤤🤤🤤😁😀

@kylegrace4718 3 жыл бұрын

I use the envirobase and a sata 5500 gun ..... the way we were taught was turn the needle out one full turn from fully in and at 1.1bar then spray the last coat (technique coat) .... but I was sure there was other methods ..... good channel bro and you must have a great booth for not having to plastic off the back of the car for overspray

@MOTIVATEDPAINTERS 3 жыл бұрын

The car has spray mask 🤙🏼

@kimonjm24 7 жыл бұрын

what air pressue do u control coat at ? and what pressue did u base coat

@MOTIVATEDPAINTERS 7 жыл бұрын

+tim harding like o said in the description 15 psi 😀

@kimonjm24 7 жыл бұрын

MOTIVATED PAINTERS gotcha lol

@sh4mwowp925 7 жыл бұрын

I just realized you guys don't bag the whole car. why not? Does the Over spray get on the car?

@MOTIVATEDPAINTERS 7 жыл бұрын

+Shamel Powder the car did spray masked with liquid mask 😀

@sh4mwowp925 7 жыл бұрын

Nice i never had the chance to use the liquid mask. Can i bug you for the SKU number?. i need to order this tomorrow.

@MOTIVATEDPAINTERS 7 жыл бұрын

+Shamel Powder hey brother! It's P5970

@sh4mwowp925 7 жыл бұрын

MOTIVATED PAINTERS thank you

@hectorchicas2099 6 жыл бұрын

I also saw that you didn't bag the whole car. Is that down draft that good. ?

@keith365able 6 жыл бұрын

What's your viscosity?

@MOTIVATEDPAINTERS 6 жыл бұрын

+Keith McKnight 25 on the din4cup

@ioanioan7628 7 жыл бұрын

The same,I mess the edges 😂

@MOTIVATEDPAINTERS 7 жыл бұрын

+ioan Ioan 😂😂

@JBIRD575 6 жыл бұрын

Where can I send money for blower how much for shipping??

@MOTIVATEDPAINTERS 6 жыл бұрын

+JBIRD575 hey brother I'm all sold out of blowers bow my friend

@JBIRD575 6 жыл бұрын

MOTIVATED PAINTERS ok

@ian300whp 3 жыл бұрын

How long do you wait in between coats before tacking it off? The water paint always feels tacky to me

@MOTIVATEDPAINTERS 3 жыл бұрын

Sometimes i bake it to aid with that I don't usually tak nowadays in between coats

@thanos6953 5 жыл бұрын

thats what i call over spray dude,,i thought i needed three layers with ppg,, 2 wet and one last medium...im telling you standox,spies hecker is the future in basecoats,,,,for you americans chromax is wonderfull waterbase color..but i work with ppg for a week now and its kinda difficult

@jasonhill6819 3 жыл бұрын

Overspray all over car I was typing just as he said hes used spray mask lol. Apologies

@MOTIVATEDPAINTERS 3 жыл бұрын

Hahahaha respect for this comment.

@christopherarcilla8767 3 жыл бұрын

You should cover plastic the whole car, the rear is not cover, otherwise your rear over spray and good luck you polish whole thing at the back and clean all over spray.