@@Sj3di yes

i can connect my zen to my ps5 but the scrips dont work? have u not updated ur console in a long time?

@@BabyWiltt no I have the most recent update, you probably have to reset your zen and update it

ty for telling me this

This was everything

How do I get on zen mode?

@@evanlastname1449same

@@evanlastname1449 press the right blue button till you see the zen icon

How do i switch back?

For the Edge yeah that can be another option, but you can just use it as a crossover controller as well

Yup edge don't work

Me to😢

Have you put the right setting on your zen if not it won’t work at all ( button layout , L2R2 for aim and shoot ect …)

lies

Stop saying lies cause ur dumb​@@christopherwhite6943

Make sure all setting are correct in Cronus to be able let the script work in game and if play mw3 don’t trust firing range for recoil and aim assist practice on game

@@jakemillward8670i can't get mine to work i do the method then it won't let me move my controller

Yo bro im finna go buy a zen , does scripts for mw3 work??

@@animalvideos6315they do but depends what pack you put on the zen I have beam pack and only good for anti recoil and other thing and if the zen don’t work in game it’s because you have put your controller settings on correctly on the actual zen so take you time and actual look at what your reading in the zen to make everything correct took me three days get it right because I rushed it

That means you did not do it correctly, you are still in the "bypass mode" which means it is a direct connection and your scripts will not work. If done correctly your scripts will work, it is a timing thing so it must be done quick enough. It also may not work well for the Edge.

did you ever find a fix for this

Try doing the bypass with a Dualsense in A1 like the video. Then once you bypass connect the edge in port A3

Because of the new update

No

Which gamepack? If you follow the first method it works everytime

@@legitcloudzzz2110 I used the Apex Legends beam as a dual-sense edge. It sets up mod, but there is no reaction at all such as rebound control or bunny hop

Yes I am recording instructional videos for all GamePacks. Sports are being done first and should be up sometime this week.

@@legitcloudzzz2110 bro, it works but my script do not. V3 buypass and script not works, help

Thanks same here i need it for 2k

I also put it in zen mode without any packs

Mine works too but I can only modify the mods but I can't use them on let's say call of duty..it won't work..

Nowhere, that only matters for zen studios

Same

There’s another video easier way to do

@@j702100 which one

Are you going into bypass mode then using L3 and R3 or are you trying to bypass with the second method?

@@legitcloudzzz2110 going into bypass and then using l3 and r3.

same

Does not work really for the Edge, the timing is tigher, use the DualSense, then you can connect the Edge as a crossover controller if you like.

Make sure you plug it into bottom port

Ps4 controller won't work after update either sadly

It does I have one you have to plug it in the bottom port

go to communication method and enable use lan cable

Wym​@@3suspectagb

imagine needing zen for destiny

Either will work

You can't play direct with a Titan Two. You would need to use a Zen to bypass like the video. Then once done connect a Titan Two to port A3 on Zen. Using both like that would work fine.

there is a wire but its very hard to see

Not for the Edge, use the DualSense

what game are you playing?

@@bub10k was any game I had scripts for. Fortnite, helldivers2, cod….but I found a working way

@@matholland618 yo what way worked on fortnite for you?

@@vrageJ kzfaq.info/get/bejne/jdGRZqV015fZiZs.html

The first method uses something called "Bypass Mode". When you are in this mod no mods or scripts can be used. You can go into bypass mode by holding touchpad when resetting Zen or when powering it on. The only reason for Bypass Mode is to allow you to turn off accessories without removing a Dualsense from the Zen. After you do the L3 + R3 sequence Zen will go back into mod mode.

@@legitcloudzzz2110 yo does this work with dualsense edge

Yo what is apex beta that just released in zen studio and why can't I access it ​@@legitcloudzzz2110

You should be fine with a Dualsense in port A1. Are you using a Dualsense Edge or running a crossover setup?

why not just do the update, unless there is a second for it. It may not work on older firmware.

do you have the edge controller

@@semmo6574 no, I have an aimcontroller, but it already works, I had to put dualsens in A3 and A1

You need to plug in the ps5 controller and keep it turned on then its as simple as plugging your ps4 controller into the bottom left and turning it on :)

@@AQT_ Whenever I do that, my buttons/controller doesn’t seem to work. The charging indicator shows up for the controller and the dimming light too. The zen also seems to work, but I cant press anything on the controller as it doesn’t work.

Yes firmware 2.2.3 is required. If you are not able to update through the update tool try the online updater. Make sure the rear of Zen is connected to your PC, then hold the underside zen button to go into bootloader mode for updating. firmware.modcentral.ca/

Doesnt work on fortnite

no without remote play

There's a good one on the Zen Library

​@@jerryainsworth2278hey bro what's the exact name in the library??I feel like my zen works but maybe the SCRIPTS are bad..is anyone having trouble with COD 3 BEAM?

Because of the new update

don't buy scripts, they 99.9% of the time selling free ones from other people :P

Check that bluetooth is off on the ps5 itself. If it continues try a different usb cable.

okay thank you @@legitcloudzzz2110

No I don’t have the u5

@@legitcloudzzz2110 ok no problem. I just realize that beloader team has a new product (Besavior P5mate) and seems like U5 is going to the trash one way ticket. This is so fucking annoying....

Let me know how it goes. I have heard v1 Edge is fine but there is supposdly a issue with the v2 revision.

@@legitcloudzzz2110 My dualsense edge only works with a regular dualsense donor. I first connect the regural dualsense using method V2 or V3, after everything went well, I additionally connect the dualsense edge and it works, yesterday 2 hours in the warzone everything was ok. It’s just that dualsen edge does not work when connected with version V2 or V3. I also noticed a strange feature that when connected via V2, touchpad and reset button, it reconnects and works. But the problem is the following: I turn on Warzone, switch to another profile RONIN, I can go into the settings, but in the game itself the ronin package does not work for me. I don’t have an aimassist, I don’t have bunnyhop when X, tackles O, or anti-recoil. Zen shows that everything is ON, but nothing happens in the game.

@@KingArtur0404I have this issue as well.

@@legitcloudzzz2110i tried it now both methods do not work

@@legitcloudzzz2110i tested it now and both methods do not work

It’s still working for me. What controller are you using to bypass in A1?

it isnt patched

nope

It does both work this was just filmed and retested today as shown in the video. Make sure nothing are in the front ports when doing this

bro do u even have a zen?

@3suspectagb yes right next to me duh

You are so lost lmao

No not yet but I can test that out. If anything is different I'll update

@@legitcloudzzz2110need that test

I tested it it doesn’t work like it did with v1 method on 2.2.2 firmware but you can get it to work by plugging a normal ps5 controller in A1 and edge in front port

​@Seans2685 I honestly just Bluetooth my edge to zen after bypass and it works just fine too

@@N1CK615 yeah but you still need a second controller in A1 to do so is my point with firmware 2.2.2 and method 1 you didn’t need the second controller it worked fine like a charm in A1 with method v1. So hard to explain what I’m trying to say in comments though and the controller that you not using that is plugged into a1 will vibrate on ever touch of the edge controller even with vibrate blocked on script but it is nice to be able to Bluetooth I was only trying to got make them aware that somewheee from firmware 2.2.2 and 2.2.3 the zen stoped supporting the edge connected into A1 port 2.2.2 worked fine and 2.2.3 not so good as it adds more steps to the method making it not so easy for those that already had trouble with v1 and v2 method are for sure gonna struggle with v3 on firmware 2.2.2.