#crownvic #f100 #ford In this video I got a quick short little video of me building my 65F 100 in eight minutes
Пікірлер: 106
@FlyinBrian7777 күн бұрын
I really like these conversions. I'm guessing it's a dream to drive.
@tdchotrods98893 күн бұрын
yea its pretty darn awesome.
@TrialAndError8713 Жыл бұрын
And because it's a Vic, it's very reliable. This is really cool! 😎
@tdchotrods9889 Жыл бұрын
Thank you
@jonathancastro73486 ай бұрын
Well shoot. Guess im on the look for a Crown Vic. I have my grandfather's 68 ive been wondering what to do it. Well done!
@LachoGuz198829 күн бұрын
I have my 66 and this project looks awesome great job
@tdchotrods988912 күн бұрын
thank you
@parkerlomax9304Ай бұрын
Damm this the best video on how to do the swap I’ve seen keep it up bro 🔥🔥🔥🔥
@tdchotrods988912 күн бұрын
thank you
@justinberhow971019 күн бұрын
How inspiring this is so cool...I need a daily like this
@tdchotrods988912 күн бұрын
thank you
@jeremydavis1716 Жыл бұрын
Thanks for sharing your project build
@stuartburke-kj4jz Жыл бұрын
GREAT JOB. The first time I watched a build video twice! Thank you for sharing. Keep up your innovations 💡!
@tdchotrods9889 Жыл бұрын
Thank you
@ryneziemba849910 ай бұрын
Incredible build! Now I gotta learn how to weld so I can make one of these myself!
@richardschneider92798 ай бұрын
Nice swap, Well Done! Thanks for showing it all in just 7 minutes.
@tdchotrods98898 ай бұрын
thank you
@marcattoma70909 ай бұрын
Nice great job thank you for sharing
@staylofordo7111 Жыл бұрын
Nice build, thanks for the video!!
@tdchotrods9889 Жыл бұрын
thank you
@robertcampbell9205 Жыл бұрын
Y’all did a great job building that truck.
@tigresantajulia10809 ай бұрын
you got me thinking about my c20.. good shit brother 🤘🏽
@Fjzxl Жыл бұрын
I just smacked a barrier thinking about doing a body swap like this appreciate the insight
@tdchotrods9889 Жыл бұрын
thank you
@HectorGarcia-eo1lq Жыл бұрын
Looks awesome 👏🏻.
@badad0166 Жыл бұрын
I have a Vic and I'm so tempted to at least save it to do "someday"... As far as the bed, you can chop up a picture in Photoshop and see if you think it's worth it. I think for aesthetics, a couple of inches would look better, but that's a long way to go for a nudge. Great instrument panel match-up. Pretty truck.
@tdchotrods9889 Жыл бұрын
thank you
@o2scarrАй бұрын
Really awesome thanks and keep going it!
@CarlosGonzalez-oo2jf27 күн бұрын
It was of great help ... Awesome video
@tdchotrods988912 күн бұрын
thank you
@craigengelman13692 ай бұрын
wow ! people just dont understand the dedication, time, money etc etc that goes into doing a project this big . i all ways wanted to put a 69-72 chevy pickup body on a g body frame. congrats on a job very well done !!
@tdchotrods98892 ай бұрын
That would be awesome!! You should do it.
@NemuiJin7 ай бұрын
This was pretty sweet. Never would have thought to body swap onto a crown vic.
@RedBud315Ай бұрын
My friend told me about this a few years ago before he sold me his Mom Grand Marquis because he was considering buying a truck to use for her chassis. Her car was way to nice to chop up so I forced him to sell it to me.
@donfronterhouse4759 Жыл бұрын
Thatsa pretty cool swap. It would cost a fortune to give that truck a lowrider, comfortable and easy to drive. When I saw what you were doing well it just made sense and you make it look easier than sure it is,but you make it look simple. 👍
@tdchotrods9889 Жыл бұрын
thank you
@jerrymartin5884 Жыл бұрын
Awesome work dude i hope my 54 turns out this good
@tdchotrods9889 Жыл бұрын
Hell yea man!
@classactkirk11 ай бұрын
What a awesome truck! I just really think u should have cut the back,short box truck looks sooo much better and add more value to the truck. Great job all together. I love u kept the truck dask and we're able to use the car gages, real slick.
@pitster10 ай бұрын
I am doing a 1949 Ford F1 swap and I watched this series a few times to see how you did stuff. This is what youtube should really be about.
@shanedevries805 Жыл бұрын
Well done That's so so cool
@tdchotrods9889 Жыл бұрын
thank you
@joaquinsolis7071 Жыл бұрын
Looks good my friend. My grandads 64 needs engine transmission ,glass, drive shaft. I’m thinking cv donor car
@mario179929 ай бұрын
like from Brazil!!!! 👌👌👍👍👍👍
@danhoy835610 ай бұрын
Like your videos man.. come back!
@scraptoartmetalworks2494 Жыл бұрын
Keep us posted as you pile up the miles!
@tdchotrods9889 Жыл бұрын
Will do
@keithkalawa4239 Жыл бұрын
Like your video sir
@zuka_moton5712 Жыл бұрын
Haha awesome the bed dose seem to be a lil lower then the cab almost looks like when u crack a frame maybe u should add like some spacers or rubber bushings on the bed to make it sit a lil more flush with the cab but over all looks bad ass
@workingmansrestorations707111 ай бұрын
Wow. Cool build. I have a wrecked k5 and an 03 Tahoe I want to match up
@yeahright302 Жыл бұрын
this has got to me the 4th or 5th swap i seen on you tube since they did it on motortrend tv on hotrod garage a couple years ago when they did it!!
@NINE70ENDURO6 ай бұрын
I was thinking you took the crown Vic motor and swapped it to the truck not put the ford cab on the crown Vic! Awesome video big surprise. I like the fox body in the back ground. Love fox body mustangs
@tdchotrods98896 ай бұрын
yes sir. I like how it turned out still got to finish it up, but it sure makes for a nice driver. and yes, the fox needs to get finished up and decide if I'm going to keep it.
@billyhouse19437 ай бұрын
Thank you..
@PeterHatch-mx7zc Жыл бұрын
I'm watching one of the better builds I seen in 6 years
@tdchotrods9889 Жыл бұрын
Thank you!
@pomnichowskiАй бұрын
🖐🏽Nice nice Yes yes!
@jviews1 Жыл бұрын
This may be easier than taking my 68 international and adding crown vic front end, changing engine and rear end. Thinking about it.
@davidbell11818 ай бұрын
Killer!!!! I wonder is this is possible with a OBS ford?.?.? Also if it’s possible to retain the Vic dash and how you would title it if it had the Vic vin in the windshield
@madgingercustoms Жыл бұрын
This video was awesome!! I'm going to attempt this with an International 1210. Anything you would suggest I pay particular attention to?
@tdchotrods9889 Жыл бұрын
not really its a pretty nice chassis to make everything easy> just make sure not to cut any of the wiring with the cut off wheel like I did 😂Opps
@RedBud315Ай бұрын
For must have been planning ahead when they developed the F-Series and the Crown Vic. Or, it was just an accident like the guy and the girl who ran into each other to make Reece's Peanut Butter Cups in the commercial.
@tdchotrods988912 күн бұрын
lol right
@richardroff6524Ай бұрын
I would give this video 10 thumbs up if I could.
@tdchotrods988912 күн бұрын
thank you
@0.0.0.0.1 Жыл бұрын
Mpg difference from before and after? Truck body probably weighs less then the crown vic did, but not as aerodynamic. Nice build.
@danhoy835610 ай бұрын
What’s the pick point your using for the chain hoist in a building like that?
@HectorGarcia-eo1lq Жыл бұрын
that truck looks fabulous now I like how it turned out. I have a '53 truck and I was thinking about something like that with a 2009 Grand Marquis but in the end I sold it. Lol. But I find another 2007 what year is this crow vic you have there.
@tdchotrods9889 Жыл бұрын
2003
@landshark2184 ай бұрын
Swap the gauge for the digital gauges from those years grand marquis
@tdchotrods98894 ай бұрын
That would be sweet
@luisrcarrasco2062 Жыл бұрын
Loved the way it look year is the crown vic ??
@tdchotrods988911 ай бұрын
03
@joelgaona24118 ай бұрын
For how much would you build one. Only labor I will provide the car n the truck just estimate your work is awesome
@tdchotrods98897 ай бұрын
i charge 10k for labor to build one.
@ourugby1 Жыл бұрын
This was awesome. Just great work dude. I have a 1965 f100 short stepside. Do you think I would have to cut the bed on it like you did?
@tdchotrods9889 Жыл бұрын
No the vic wheel base is the same has a stock short bed😀
@gobowz11 ай бұрын
I was getting ready to ask if you cut a short or long bed. Now I know. Great job man. I have a line on a crown vic and i'm trying to find a 60s-70s F100@@tdchotrods9889
@bradfordw1247 ай бұрын
Do you have any rubbing at all with those wheels? What tire size are you running?
@rustymohr66529 ай бұрын
Check your "grounding" connections. There are multiple grounds on these cars. You may have overlooked a critical grounding point.
@leofuentes47767 ай бұрын
To bad I don’t have a shop to do the job I have the perfect crown Vic for a build I just need to find the right truck for it.
@James-gx9mrАй бұрын
I built one a few years ago and I've mostly used it for just cruising but lately I've been trying to haul stuff in the bed.... the suspension is just not there to be able to put any real weight. Did you do anything to the rear suspension? I've heard f150 shocks on the rear help?
@Realblessedpadre5 ай бұрын
Would you consider making another for purchase ?
@tdchotrods98895 ай бұрын
Absolutely!
@tanovw Жыл бұрын
Oh this is probably where bodevision got the idea from, instead of a vic he is using a towncar.
@joshsoorlin579 Жыл бұрын
Is it possible to not have it so slammed looking, can you lift it a few inches with springs? Or will it not fit?
@tdchotrods9889 Жыл бұрын
you could just not channel it as far as i did over the frame to get it taller
@adamthomas4638 Жыл бұрын
You guys made it look so simple like if you had both cars you could just drive one under the other really no big fab to make it work
@tdchotrods9889 Жыл бұрын
thanks
@jameshardman476010 ай бұрын
I cut the body off my 03 crown Vic but now I get no crank or start. It just ticks a bunch. Any recommendations?
@TylerSmith-gx4hs7 ай бұрын
Maybe grounds?
@muerto210711 ай бұрын
What do you register the truck as?
@tdchotrods988911 ай бұрын
1965 f250
@jeffgammon1392 Жыл бұрын
About how long did the swap take you?
@tdchotrods9889 Жыл бұрын
2.5 weeks after work. But long nights
@jenniferbryonmuraski62568 ай бұрын
What year was the crown Vic?
@tdchotrods98898 ай бұрын
2003
@mtnpwny Жыл бұрын
So legally... is this a 65 f100? or a Crown Vic?
@brandonallgood5363 Жыл бұрын
Also curious how registration works
@staylofordo7111 Жыл бұрын
The id is on the body, so it’s an f series pickup, I would say. Looks like a pickup, smells like a pickup…. But I could be wrong. Awesome build though
@wesleycurrry8906 Жыл бұрын
different
@GregoryBamber Жыл бұрын
Please paint it. Patina has been done to death.
@rustymohr66529 ай бұрын
Where is your NEW content? Did you "lose the shop"?
@2H2521 Жыл бұрын
Strangest swap I’ve ever seen, but I absolutely love it! 😂