CTIS seals, grease wheel bearing and spider gear shimming on the LMTV. Eco Hub prerequisite

Рет қаралды 7,015

Күн бұрын

New CTIS seals, repacking wheel bearing and setting up the hub without special tool on the LMTV FMTV
0:00 Hub removal
1:00 Inner wheel bearing
1:10 Hub seal removal
2:06 Inner wheel bearing
2:20 CTIS seals removal
6:15 CTIS seals install
10:18 Inner wheel bearing grease and install
11:30 Hub seal install
12:10 Brake shoe removal
13:03 Hub install
14:13 Wheel bearing nut torque
17:43 Spider gear shimming

Пікірлер: 43

@SeanFillner 3 жыл бұрын

I drooled on myself as my jaw was open the entire video....so many pieces...thanks for sorting this out and sharing it with the FMTV community...

@NEILSWORLD 3 жыл бұрын

Lol, I see bib merch in my future. 🤣

@dflood316 3 жыл бұрын

Thanks for putting out another great "How To" video. This clarifies some steps I read in the TM.

@NEILSWORLD 3 жыл бұрын

Your welcome

@christaylor1710 3 жыл бұрын

A very useful video !!! Thank you very much for taking the time to do this for all of us ! Definitely putting this into the save files !

@NEILSWORLD 3 жыл бұрын

You're welcome 👍

@SlikeAnubis 3 жыл бұрын

Thank you for sharing, makes all so much clearer now. Now I need to get the tool made and I can try it myself.

@NEILSWORLD 3 жыл бұрын

Glad it was helpful!

@JeffWilliamsNetwork 3 жыл бұрын

Great video, Neil! Thanks for putting it together. Can you share where you got the tool to install and compress the seals? You know, the tool you hit with the dead blow hammer.

@NEILSWORLD 3 жыл бұрын

I printed the page with the tool specs out of the TM and brought it to a machine shop to have the tools made.

@krisbarnes1223 3 жыл бұрын

Great to see how the ctis seals work for sealing on the spindle and route to the wheel stud- 1:01

@NEILSWORLD 3 жыл бұрын

I'm glad you can see that I wish I would have explained it.

@Adventuredriven Жыл бұрын

Great video as always, nicely done. So I did a search and can't find that tool, where did you get it ? I know you said Trail Tech but it did not come up for me.

@NEILSWORLD Жыл бұрын

As you can see in the video it's not necessary but here is a link to it. www.ebay.com/itm/385193110873?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=rlmoozfjsui&sssrc=2349624&ssuid=xj1PHBiHSBe&var=&widget_ver=artemis&media=COPY

@Adventuredriven Жыл бұрын

@@NEILSWORLD thank you

@Frisky0563 3 жыл бұрын

Neil where do you live I’m coming over just to help and learn ! Thank for making the video

@NEILSWORLD 3 жыл бұрын

Awesome, I could use a cameraman.

@matthewpalmucci5091 2 жыл бұрын

Neil great video do you own a shop? I was thinking about getting a 6 x 6 and I live in New Hampshire. How can I contact you?

@ryanbernardo8547 3 жыл бұрын

Do you have a link to the PDF for the TM that covers this? Just had gear oil puke from my driver front CTIS fitting so assume I have lost a seal and am about to attempt this same procedure. Huge thumbs up on the video!

@NEILSWORLD 3 жыл бұрын

www.steelsoldiers.com//threads/m1078-tms.118919/ It's TM 9-2330-365-20-3 I have a bunch of the ctis seals I'll let go cheap.

@robb3489 2 жыл бұрын

Neil great video. Could you tell me what size the axle nut is? Possibly 3-7/8". I can't find one so I need to make an axle nut socket.

@NEILSWORLD 2 жыл бұрын

Are you referring to the wheel bearing adjustment nut? westerncanadianrockwell.ca/products/hub-socket-meritor

@robb3489 2 жыл бұрын

@@NEILSWORLD fantastic thank you!

@urgentcareguy3 Жыл бұрын

I have a stupid question. How do you keep the caliper straight to get an accurate measurement? I have the TT tool too. I found the guide holes in it hard to use.

@NEILSWORLD Жыл бұрын

You could wiggle it around a little to get the shortest measurement which would be straight.

@BERZERKERSV4 2 жыл бұрын

Where did you purchase the CTIS seals, bearing drivers and axle nut “socket”… thanks much

@NEILSWORLD 2 жыл бұрын

I bought the ctis seals on eBay and I had the driver made from the specs in the manuals.

@BERZERKERSV4 2 жыл бұрын

@@NEILSWORLD and the axle nut "socket"... I saw the word "Rockwell" stamped on it during your excellent video... on a side note this is what I'm dealing with.. kzfaq.infoENCXhZbi4Z4?feature=share HWY light continued to flash,tires only inflated to 35psi... All 4 CTIS lights then began to flash when I pressed "Sand Mode" ... truck was running..thoughts?

@NEILSWORLD 2 жыл бұрын

westerncanadianrockwell.ca/products/hub-socket-meritor

@NEILSWORLD 2 жыл бұрын

It's really hard to tell where that air is leaking out from your video. Try to pinpoint where the air is coming from and go from there.

@BERZERKERSV4 2 жыл бұрын

@@NEILSWORLD yes sir I shall... as for your seal drivers...do you recall the 2 size s you used..?..again thanks much (I'm preparing for a relatively inexpensive but time consuming adventure )

@tybaslee5646 3 жыл бұрын

I am loosing air in the front tires is this due to these seals. Rear tires stay inflated. Ctis controller blinks I'm sure it's because of low tire pressure in the front tires

@NEILSWORLD 3 жыл бұрын

I'm not familiar with the ctis system. Mine has always worked. Join lmtv mtv military trucks on Facebook and ask the question there.

@endlesstrailexpeditions 3 жыл бұрын

Nice seal driver, did you get it?

@NEILSWORLD 3 жыл бұрын

Took the page from the technical manuals with the dimensions of the seal driver to a machine shop and had it made.

@CallMeColtLLC 3 жыл бұрын

@@NEILSWORLD I was wondering the same thing. A quick search for seal drivers showed a few with a hefty price tag. I will need to find those specs in the TM & have some made up. Did you use steel or aluminum?

@NEILSWORLD 3 жыл бұрын

Steel