CTS Turbo Outlet Pipe and Turbo Muffler delete 2016 Volkswagen Jetta GLI (MK6.5 EA888.3)
Рет қаралды 31,040
3 жыл бұрынHello guys, Today I am installing a CTS TOP and Turbo Muffler Delete on my 2016 Volkswagen Jetta GLI MK6.5 EA888.3. Install was pretty straight forward nothing too hard. You will need to remove fender liner, remove 5 bolts (2 on TOP and 3 on the Turbo Muffler)with a T30 as well as removing two clamps. One clamp you can pry off and the other you will need a flat head screwdriver.
Hope you enjoy the video. Let me know if you guys want me to upload a before and after the install.
Car Specs
Apr stage 2 ECU tune
Apr TCU DSG Tune
Apr Carbon fiber Intake
Apr Downpipe
Miltek 3" Catback Non resonated
Newly added
CTS Turbo Outlet Pipe
CTS Turbo muffler delete
@NiicK516 5 ай бұрын
After doing this let me give some tips to people that might have trouble also. If the original charge pipe won’t come off the silicone pipe on the turbo muffler just twist it like 180 degrees. If the turbo muffler won’t come out after taking out all the screws tap it with a hammer or anything you can use and just keep trying to get it out. (The hammer tap didn’t get it out but helped break it loose). And for anyone that can’t get the screws in the rubber bushing on the new charger pipe bracket use some wd40.
@JustWantGold 3 жыл бұрын
Bro great vid, got a sub from me! On one of your comments about not many KZfaqrs having our cars, I couldn’t relate more. Either old channels or just don’t upload on the car anymore. Look forward to seeing your build, keep it up.
@TheeGTIGuy 3 жыл бұрын
Thanks for your support, Stay tuned I have so much planned.
@Lead_Bacon Жыл бұрын
When you do stuff with these rubber hoses, take some vasoline and lube up some of the hoses, it’s safe for the motor to injest if you accidentally let some get in the intake and it’ll evaporate off over time, and it helps install greatly
@mazpr2025 Жыл бұрын
Better than that is dish washer soap diluted with water, when wet is super slippery but once it dries it sticks.
@MarensKhaos 3 жыл бұрын
Pretty decent details dude! Thanks for the insight!
@TheeGTIGuy 3 жыл бұрын
You're welcome brother, stay tuned for me
@TheeGTIGuy 3 жыл бұрын
🤔
@willax1435 Жыл бұрын
merci pour ce tuto merci mec 😁👍
@DWP.GAMING 3 жыл бұрын
Subbed! Gonna do this next
@TheeGTIGuy 3 жыл бұрын
I hope my video helped 💪
@smh_lifestyle 3 жыл бұрын
Awesome job bro
@TheeGTIGuy 3 жыл бұрын
Thanks bro, I'm trying to do better 🤣
@smh_lifestyle 3 жыл бұрын
@@TheeGTIGuy You will bro, its a process. practice, practice, practice. grab knowledge around you and research. trail and error. If i can do it so can you
@micherog2230 2 жыл бұрын
Where does that extra piece that comes with the outlet pipe go ?
@maxbearofficial 3 жыл бұрын
Hi bro, congratulations for the video and since I'm also on the subject of modifications I wanted to ask you if this kit is applicable to a 2011 Audi TT8j3 1.8 tsi Thanks in advance
@TheeGTIGuy 3 жыл бұрын
Hey Bro, Honestly I have no idea but check ECStuning.com to see if the parts also fit, Audi and VW are same family so the engines should sort of be the same. Process should be similar. Best of luck to you and feel free to reach out if anything!
@micherog2230 2 жыл бұрын
Can you make throttle pipe video that would help allot
@angelveras7576 Жыл бұрын
Question for the pancake pipe replacement. Does it work with an fmic upgrade? Or would it be a waste if you get this and try upgrading?
@TheeGTIGuy Жыл бұрын
It does work, if thr fmic piping goes to the throttle pipe
@joshualyte9957 5 ай бұрын
Can this work on the Jetta 2012 twincharged 1.4L engine?
@cristianramos7078 3 күн бұрын
Does it light up the check engine light?
@marksawicky4485 3 жыл бұрын
Would it be easier to get to the diverter valve from the wheel well location or go from the top?? taking out that seems like i could get to it easier but was just wondering
@TheeGTIGuy 3 жыл бұрын
Diverter valve is under the actual intake piping for the turbo, it would be easier from the top.
@NerdyMani 2 жыл бұрын
I was told that the best way to get the bolts out is with a ball allan
@cjfick3262 2 жыл бұрын
I installed a bov on my 2017 jetta GLI and I found it easiest to remove the entire turbo from the car because the room is very limited in that tiny engine bay
@diegolamendola5720 3 жыл бұрын
did you notice a noise difference? for example the turbo spool up noise
@TheeGTIGuy 3 жыл бұрын
Sounds like a diesel truck
@iiBeSwavey 6 ай бұрын
I can’t find the whole kit it’s self on the site and it’s bugging me. I’m not sure what’s right or wrong but if I provide a link can you lmk what is right ? I have a 2015 Jetta gli se. I don’t want to have to buy all parts separate. Please and thanks bro. Also you got a sub from me !
@TheeGTIGuy 6 ай бұрын
www.ecstuning.com/b-cts-parts/turbo-outlet-pipe/ctsit210~cts/ www.urotuning.com/products/cts-turbo-throttle-pipe-mk6-jetta-1-8t-2-0t-gen3-cts-it-215?currency=USD&variant=8385411547191&Google%20Shopping&stkn=334b6bf4d9c9&gad_source=1&gclid=Cj0KCQiAwP6sBhDAARIsAPfK_wbIgddeBwprcj8bMew0RMmO8orUwjn-SBzJ585Ba1UJ8s5FN0eNz0waAtp4EALw_wcB
@chrisdonnelly9423 2 жыл бұрын
Woulda been easyer to use a ratchet wrench for the top band
@mararc1091 2 жыл бұрын
Can you provide the links for the parts
@andressalgado2625 3 жыл бұрын
Did you order the parts separately or in one order? If separately what the exact part #?
@TheeGTIGuy 3 жыл бұрын
I bought it from a guy on offerup. But just search it up on ecstuning or Eurotuning and it will pop up. Make sure it fits your car
@xxdipumaxxcage3678 Жыл бұрын
Hey man I got a question I got a Jetta Gli 2017 and I’m having fitment issues with the charge pipe on the new CTS intercooler
@TheeGTIGuy Жыл бұрын
When I got my intercooler I bought the gen3 intercooler hoses from IE. They were exactly what I needed.
@saulb0714 3 жыл бұрын
Did you put the o ring inside the muffler delete?
@TheeGTIGuy 3 жыл бұрын
Yes, I had pre installed ig
@yoperezz 2 жыл бұрын
So the throttle pipe, charge pipe and discharge pipe is the same thing just different name ?
@TheeGTIGuy 2 жыл бұрын
No, throttle pipe is intake to intercooler, charge pipe is turbo to intercooler and discharge pipe would be the exhaust
@yoperezz 2 жыл бұрын
@@TheeGTIGuy i see i was confused, so in summary down pipe is the discharge pipe ? I’m new to the vw cars I had a mustang before so it’s a whole different concept to me
@mk6erik 2 жыл бұрын
how did you get the 2 t30s off from the top of the turbo muffler?
@TheeGTIGuy 2 жыл бұрын
I went and unscrewed them from the engine bay.
@Quattro_Camacho 11 ай бұрын
I got a boost leak after doing this , I installed everything correctly. The clamp doesn’t keep the hoses tight on the new one
@TheeGTIGuy 11 ай бұрын
Make sure to use the oring. Also make sure the clamp is on right
@r20mk6r 7 ай бұрын
U need a super good clamp built specifically for intercooler hose small diameter and also i had a problem with adapter that connects to lower intercooler hose leaking so i got new ecs brand connector for intercooler hose and im thinking it will fit better than my ebay one i had
@zelmitchell2692 2 жыл бұрын
So I just ordered my outlet pipe but what was that other thing you installed where can I get what’s the name ?
@TheeGTIGuy 2 жыл бұрын
Turbo muffler delete
@zelmitchell2692 2 жыл бұрын
Okay I’ll do that next I replace the charge pipe and my throttle pipe
@ChezzOnBass 2 жыл бұрын
Do you think this is the same for the 1.8 Passat?
@TheeGTIGuy 2 жыл бұрын
I have no idea honestly
@jessicafredericks4839 3 жыл бұрын
Doing the Honda next!?
@TheeGTIGuy 3 жыл бұрын
You a fool 🤣🤣🤣 Let me know what you need and PULL UP!
@edshalyandujar9134 3 жыл бұрын
Hes doing my BMW next
@flvers1266 2 жыл бұрын
What is the best tool to use to reach the far back screws on the turbo muffler?
@TheeGTIGuy 2 жыл бұрын
I just used my Allen wrench with a ratchet
@kerboune9198 6 ай бұрын
@@TheeGTIGuy What is the type of the bolt on the turbo muffler ?
@TheeGTIGuy 6 ай бұрын
@@kerboune9198 iirc t25
@kerboune9198 6 ай бұрын
@@TheeGTIGuy thank you very much, +1
@TheeGTIGuy 6 ай бұрын
@@kerboune9198 anytime brother!
@sadboy1.8t30 2 жыл бұрын
Is this the same for a Jetta tsi 2016 1.8t ?
@TheeGTIGuy 2 жыл бұрын
Not sure but if the piping is the same then yes
@alexmelendez2118 2 жыл бұрын
How hard was this I’ve been thinking of doing it
@TheeGTIGuy 2 жыл бұрын
Not too hard it's easy if you have the tools
@Alexis-mk6 Ай бұрын
I lost the clip for mine and it keeps falling off lol
@anuarw7455 3 жыл бұрын
Do i have to be stage 2 for this? Im uni stage 1
@TheeGTIGuy 3 жыл бұрын
You don't have to be tuned just let's more air go to the engine. Stock pipes restrict airflow.
@willie123811 3 жыл бұрын
@@TheeGTIGuy is the pipe hitting your fan?
@TheeGTIGuy 3 жыл бұрын
@@willie123811 it was at first but then I adjusted it and now it's fine
@grand_master_glass 3 жыл бұрын
sound test?
@TheeGTIGuy 3 жыл бұрын
The following video is my review
@attackticaltwitchtv3542 2 жыл бұрын
What exactly does the turbo muffler do?
@TheeGTIGuy 2 жыл бұрын
Turbo whistle sound amplified
@attackticaltwitchtv3542 2 жыл бұрын
@@TheeGTIGuy increase performance any?
@TheeGTIGuy 2 жыл бұрын
@@attackticaltwitchtv3542 to my knowledge ...... no
@drac_bsted5026 3 жыл бұрын
Where is the throttle pipe located?
@TheeGTIGuy 3 жыл бұрын
It's infront of the radiator fan, it's a pain in the butt to remove because of how hard the suction is with the coupler on the manifold.
@drac_bsted5026 3 жыл бұрын
@@TheeGTIGuy thanks!
@TheeGTIGuy 3 жыл бұрын
@@drac_bsted5026 you're welcome!
@TheeGTIGuy 3 жыл бұрын
@@drac_bsted5026 go ahead and subscribe 😉 I got more content on the way
@drac_bsted5026 3 жыл бұрын
@@TheeGTIGuy I got you bro! Your video helped me out a lot, I just ordered some parts that I’m gonna put on soon! The video was really spot on with the details🔥💯
@Dislxud_kid 3 жыл бұрын
What’s the benefit?
@TheeGTIGuy 3 жыл бұрын
Better throttle response with the turbo outlet pipe and throttle pipe. With the turbo muffler delete you get more turbo whistle sounds as the air going through isn't being fully restricted. Overall you can notice the difference after doing the swap. Not really a gain HP mod but more of a better response and better sounds mod.
@Dislxud_kid 3 жыл бұрын
Nice one! Ordered one 😏
@TheeGTIGuy 3 жыл бұрын
@@Dislxud_kid Nice, Hope my video helps out, I also have a before and after in my channel. Got more content coming soon if you want to subscribe 🙂
@emaruiz1729 3 жыл бұрын
@@TheeGTIGuy mejora algo
@TheeGTIGuy 3 жыл бұрын
@@emaruiz1729 mejor responsa de intake, suena mejor, y más pitó al turbo.
The Parking Lot Mechanic
Рет қаралды 16 М.
Crafty Workshop Builds
Рет қаралды 32 М.
CheZee
Рет қаралды 1,6 МЛН
EdisonPts
Рет қаралды 1,9 МЛН
RAMAZAN
Рет қаралды 38 М.