Cura Profile Option for Creality K1 & K1 Max

Рет қаралды 43,838

7 ай бұрын

Chuck shows another slicer option for Creality K1 and K1 Max. He shares his Cura profile and compares it to Creality Print and Orca Slicer in this episode of Filament Friday.
Video Sponsored by:
www.pcbway.com
K1 and K1 Max Cura Profile:
thangs.com/file/971576
K1 Max: shrsl.com/4avrb
K1: shrsl.com/4avrc
Ender 3 V3 SE: shrsl.com/4avrd
Ender 2 Pro ($99): shrsl.com/4avrg
K1 Max Side Spool Holder:
thangs.com/file/948987
Filament Friday Tool Kit:
amzn.to/2MOR00X
Buy - Filament Friday E-Leveler 2:
amzn.to/3qUl80A
(Original version: amzn.to/3qEr2mw)
How to Use the E-Leveler 2: www.chepclub.com/e-leveler2.html
********* $3 - Ender Style Cura Profiles Download Links: *******
Latest V5.x Profiles: rb.gy/5k981c
TPU Profiles: shorturl.at/V08bk
PETG Profiles: shorturl.at/RLEfI
(Free to Patreon Members)
**** Support the Channel *****************
Patreon: / elproducts
Thangs: than.gs/u/240257
Direct Via Paypal: www.paypal.me/elproducts
Shop at MatterHackers.com and automatically donate at no cost to you: bit.ly/1Ugcijp
***** Tools *****
T - Handle Allen Wrench Set: amzn.to/3MBBv8i
Nozzle Removal Tool:
Palm Ratchet: amzn.to/3u6ncm7
Premium Version with Rubber Grip: amzn.to/3qPs3pB
1/4'' Socket: amzn.to/2OjdHdg
***** Popular Prints:
CHEP Cube Test Print: thangs.com/file/21739
CHEP PTFE Cutter Tool: thangs.com/file/23507
CHEP Pawn: thangs.com/file/29643
Direct Support through PayPal donation:
www.paypal.me/elproducts
Buy thru this link to Slice Engineering for the Best Hot Ends and get 5% off your purchase:
www.sliceengineering.com/chep
************************************
***Creality Ender 3 Parts/Upgrades ****
Ender 3 Glass Bed:
Amazon: amzn.to/3tYea7m
Replacement Nozzles for CR10/Ender 3:
amzn.to/2m39K1y
X-Axis Tensioner
amzn.to/38BKbYP
Y-Axis Tensioner
amzn.to/2PhOdhi
Chuck's Favorite EZR Extruder:
bit.ly/2rlKCpp
Creality 8-bit Silent Stepper Board: amzn.to/2YPM0Nh
Cap Tubes & Couplings: amzn.to/2Vf8BCf
CR10/Creality Ender 3 Nozzles: amzn.to/2m39K1y
CR10/Ender3 Silicon Heater Block Cover: amzn.to/3sfDG7s
Solder Sleeve Kit: amzn.to/2Pqqngm
Creality Ender 3 Fan Set (24v): amzn.to/38u9aOl
CR-10 Fan Set (12v): amzn.to/2PrcCxK
T-Nuts Kit: amzn.to/2LsQZg8
Screw Kit: amzn.to/2Va8uGK
Temperature Meter Used in Videos: amzn.to/2JpUJOC
Screwdriver set used in Videos: amzn.to/2PbWocM
Creality Ender 3 Upgrade Package (Extruder, Silent Board & Capricorn Tubing): bit.ly/2MNvmcs
**** Support the Channel *****************
EBAY USA: ebay.to/1wtxfiU
EBAY UK: ebay.eu/2qdC5iy
EBAY Canada: bit.ly/2qdGRwh
Note:
As an Amazon Associate, I earn from qualifying purchases.
****************************************************
Filament Friday Sticker:
Send Self Addressed Stamped Envelope to:
Electronic Products
PO Box 251
Milford, MI 48381
****************************************************
Chuck's Arduino Book:
amzn.to/3tA31JP
Intro animation by Pablo Licari based on Filament Friday Logo by Brian Carter.

Пікірлер: 183

@codeymeeks5476 7 ай бұрын

Thank you so much for putting in all this time and effort to get cura peofiles for the community. You really are doing a great service for eveyone.

@johan23501 7 ай бұрын

While I don't have a Creality K1 (Max), I really appreciate you doing this for this awesome community! 😁🤘

@magomat6756 5 ай бұрын

I have a lot of problems getting my k1 to print something decend .now i used chep profile in my k1 with orca slicer, and oooh my god it is printing like a charme .very good job you did here chep.thank you very very much.

@garylester55 7 ай бұрын

Hi. My K1 prints the Benchy that came on the flash drive with the K1 in 16 minutes with no flaws, very smooth as well. Thank you for your interesting videos. Cheers

@cloakedalien 7 ай бұрын

Many thanks! I'm less than two weeks into 3d printing, the K1 being my first printer. I've already rooted my machine and experiencing the extra features of Fluidd and Moonraker. As a rookie Creality Print is my baseline and it gives great prints out of the box! Orca has profiles but gives serious stringing no matter what (seems like I'm not alone), Prusa has given me ok-ish results with 3rd party profiles but still a lot of stringing and quality issues that I cannot mitigate with my limited knowledge. But best so far, outside of Creality Print, has been Cura with these profiles! Thank you, this is really helping me going into deeper waters with 3d printing =)

@IanTheWoodchuck 7 ай бұрын

Thanks Chuck! I've been waiting to see what you've come up with.

@moog4109 7 ай бұрын

Thank you. Looking forward to more updates.

@TheGalacticStarport 7 ай бұрын

We just purchased the K1 Max for our starship fabrication. We were concerned that we would have to learn a new slicer for it, but your video for cura got us up and running in no time. :) So grateful CHEP. We may need to make a starship in your honor. O.O

@philmayhem 2 ай бұрын

Fantastic, thank you so much, the first thing I've sliced myself that actually worked, great to be able to come back to Cura, having been getting failures with Creality Print. Will gladly pay for a full set of profiles (eg PLA, PETG, PA, ABS) if you manage to build them

@chovavmordechai 7 ай бұрын

Have you enabled the side fan for the k1/k1 max in Orca slicer and Cura? In Orca Slicer it's not on by default resulting in bad overhangs.

@WerWieWas-ug4bb 7 ай бұрын

I'm also struggling with this point... Maybe he did not solved it right now?

@3DPFactory1 7 ай бұрын

Great work as always. I'm still working on my Cura profiles for the Max too.

@gnotes85 7 ай бұрын

Good info Chep! Thank you. I've been using Orca, but I will have to give Cura and maybe Creality Slicer a shot. Just to see.

@eddie1003751130 7 ай бұрын

I have my k1 max for a few days now and I love it. It prints so smooth and fast I don't look to change anything so far for now I still need to learn a few things on the creality slicer but I like the way it performs

@MCsCreations 7 ай бұрын

Fantastic work, Chuck! Thanks a bunch! 😃 Stay safe there with your family! 🖖😊 And happy holidays!

@erickuo9505 7 ай бұрын

Great video. A quick question though, are you able to get all three fans to work for the K1 Max. using your Cura? Thanks.

@truthteller5539 7 ай бұрын

Great work, Outstanding!

@gavinguy148 7 ай бұрын

Great timing my k1 max arrived yesterday 👍

7 ай бұрын

Hello, thank you for the video. How do we introduce the K1 printer to CURA?

@DSPrints_ 7 ай бұрын

I am using the profile in Cura, I've set my preferred temps.. but the printer decides to ignore that on this profile? Have no issues in Creality slicer.

@MitchCrane 7 ай бұрын

I'm interested in what goes on with the prow of the Benchy. Even your much improved Cura profile was still slightly inferior on that area, which appears to be caused by inadequate cooling and/or excess flow. I've seen this on my Ender 3 as well. Using Klipper, input shaping, and Orca slicer, my Ender 3 can print a really fast Benchy that mostly looks really good, but I get that same droopy prow section. I really like the Orca slicer, but I feel like it's failing on that area of the Benchy compared to Cura even when printing slower overall.

@vincentcimino1963 7 ай бұрын

Hi and thanks for the video, if I’m asking this type of question I probably shouldn’t attempt this due to my ignorance (newb). Once the file is downloaded to Cura, how do I send it over to the K1? SD card?

@mertcankaymak_ 5 ай бұрын

Thank you for the video. I encountered such a problem, the machine you gave does not apply the temperatures I entered in the print settings when I write G-code. Instead, it sets 240 degrees extruder_temp, 50 degrees bed_temp. How can I solve this problem?

@user-hw5hb4je4l 2 ай бұрын

Hi! Solved the temperature problem?

@Walt1119 7 ай бұрын

Good video Chuck! I've got the K1 Max and it is pretty amazing. I have had decent luck w the creality print, although it needs much more attention! I've spent a good amount of time w the Orca slicer(which I think has more and better features) BUT it always comes up estimating slower print time. I have not printed with Orca yet but will get to it. I'm printing rc airplanes and setting up the slicers take LOADS of time! Thanks for sharing w us your input and time are always appreciated and welcome!

@45llamas 2 ай бұрын

I just got a k1 and the files that came with it print excellent, the first print i slice on cura it won’t print the first layer properly, somehow the auto z offset is not correct, I either get the bed too close to the nozzle or too far and it just spaghetti. Did you run into this?

@adilator 7 ай бұрын

I have a K1 max, how does cura handle it? does it do 1 click lan printing and cam monitoring like the creality print app or do you use it just to slice?

@Zachary3DPrints 5 ай бұрын

Oh yes, those profiles are taking a lot of time to get them to work. Great video. Did you use the web interface to send the Gcode over?

@gerdanc 7 ай бұрын

Need a good Orca Slicer profile. I like the built in Fluidd connection. I like Cura on my Ender/Cr machines but I wish it had the built in connection.

@Quepiid 5 ай бұрын

im confused. the benchy gcode that come with them pushes it out in 17 mins

@mikeak7331 7 ай бұрын

I’m looking for some for the ender 3 Neo Max. Just to try.

@jeffmcguire5241 Ай бұрын

This fixed my K1 Max resetting to 240° every time! Use CHEP profile and replace your start and end with this: G Start M140 S0 M104 S0 START_PRINT EXTRUDER_TEMP={material_print_temperature_layer_0} BED_TEMP={material_bed_temperature_layer_0} G End END_PRINT

@celiaperez8888 Күн бұрын

You don't have to erase all start and end g-code, just change the [] to {} in the variables.

@gengiscu 7 ай бұрын

thanx. my k1 is arriving next week

@marktrageser6289 7 ай бұрын

your settings stopped my K1 from dancing on my desk. helpful stuff here folks. i use a lot of creality printers and this info is solid. Thanks for taking the time to do the tests I didn't want to.

@danlane9917 7 ай бұрын

One million thank yous for sharing! I was stuck and this solved a big issue I was having, great stuff.

@fliplmb 7 ай бұрын

Apologies if this is a stupid question, but where can I get the start/end gcode when setting up the printer?

@katiesmith4540 7 ай бұрын

Me too, that would be awesome, just got the K1 today and its been doing amazing, but its super loud compared to my old machine.

@stevebissonnette760 7 ай бұрын

Thanks, nice work, how about some work on TPU profiles..

@colinfielder6695 7 ай бұрын

Trust you to work it out. Thanks Chuck

@julesdrlt 2 ай бұрын

Hi, when I set a temperature on cura and print the file on the K1, the printer always prints at 240°C. Do you have any solutions? Thank you in advance.

@crazeokc 7 ай бұрын

I managed to get a perfect 29 minute benchy out of orca but I'm having problems with first layers on large prints with those profiles. (K1 Max btw)

@wmaynard47 7 ай бұрын

I, too, would like to clean up the start code. Your profile works great on my K1 with a little tweaking of my own (for ABS) but Cura passed the nozzle temp in the gcode just fine, but would not pass the bed temp. I used BED_TEMP=[first_layer_bed_temperature]. I used a screen shot of the start/end codes but the bed temp portion was cut off. What's the bed temp start code you are using please?

@scotty2salty327 6 ай бұрын

Same question... Did you ever get an answer?

@wmaynard47 6 ай бұрын

I did not. I just manually enter it into the gcode before each print. Tried a bunch of combinations but nothing else seems to work.

@scotty2salty327 6 ай бұрын

@@wmaynard47 okay thanks

@SuperBKDK 5 ай бұрын

M82 ;absolute extrusion mode M140 S0 M104 S0 START_PRINT EXTRUDER_TEMP=[first_layer_temperature] BED_TEMP=[first_layer_bed_temperature] G92 E0 G92 E0 G1 F2400 E-0.5 Found it this on reddit.

@Kevci4 7 ай бұрын

Legend, thank you sir! Just upgraded from a Ender 3-v2 to the K1 Max! Your profile really helped out, new sub.

@sonicandres1 7 ай бұрын

I kid you not, I upgraded from my ender 3 v2 to the k1 max after only 8 months of owning the printer. It arrives today and im hoping its my permanent 3d print machine

@shadow05139 2 ай бұрын

what's the rest of the Start G-code off screen for the k1 max printer?

@TzOk 7 ай бұрын

Well done, yet on Ender 3 I always had problems with the inner dimensions of details printed with Chep profiles. Also, large flat surfaces (parallel to the print bed) did not look nice.

@fliplmb 7 ай бұрын

Thanks for your hard work Chuck! These profiles are perfectly timed as I want to print a helmet for my son and Creality keep crashing. Seems to struggle when supports are added 🤷‍♂️

@dandontknow1 7 ай бұрын

same for me. it seems to hate custom supports.

@user-xp8yl5pk7w 7 ай бұрын

Try to import the profice to Cura 5.5 fail - Any Idea!

@wKich 5 ай бұрын

I don't know how did you get 60min with Orca, In my case in Orca 1.9v with default profiles (Generic PLA + 0.2 layer height) Benchy takes ~44min and if you choose HF Speed PLA profile it takes 36 min. So it's the same as tuned Cura. I think the main point of slow down is because Cura doesn't have Max Volumetric Speed limit parameters for a filament, at least I couldn't find it

@InfinityDrones 7 ай бұрын

I see you only have a PLA profile, could you do one for PETG and TPU as well please. Did you get the parts cooling fan to turn on when using the Cura?

@justhereforthalolz 7 ай бұрын

I've been scanning the comments for the same answer. I'll take the silence as a no. Therefore the profiles are rather pointless without proper fan control for proper cooling :/ My guess is that if he HAS. He plans on putting it behind some sort of Paywall which would be yet another reason to just sell the K1/K1 Max and get a real printer.

@InfinityDrones 7 ай бұрын

@@justhereforthalolz to be honest I've always used his profiles for my petg prints and just modified hotend and bed temps. I always do heat and retraction towers as it's always subject to filament changes. Tpu is the one I'm probably the least comfortable in knowing what is best. Especially because the speed required is alot slower. So I would love a solid base like a CHEP profile for that.

@justhereforthalolz 7 ай бұрын

@@InfinityDrones You forgot the biggest problem. All those other things you've "always" used..... are not for the K1/K1 Max. His past profiles have nothing to do with the problem that Creality created. A completely unusable slicer app. Those other machines you've used were all designed to work with the slicers you were dealing with. This one is the black sheep of the bunch. They purposely tried to corner the slicer market by purposely making their flagship incompatible with them and failed miserably. No profile, regardless of materials being used, will ever work without being able to properly control the fans of the machine. This has been a major problem with the K1/K1 Max and other slicer apps since they dont have the ability to do any of that without some serious jerry rigging of g-code in order to do so. The problem here isnt with the CHEP profiles, the problem is Creality itself in trying to force people into only their own slicer app. That was the absolute most retarded business decision ever made in the history of mankind and has resulted in a whole lot of very expensive paper weights now polluting the earth. So now, rather that having to produce profiles for specific MATERIALS for a machine (like all those past profiles you used from CHEP), you're having to find profiles just to get the machine to work at all and that is 100% purpose defeating and a total waste of time as CHEP is learning the hard way.

@OneHappyCrazyPerson 7 ай бұрын

Very much thank you!!

@ernestolopez4426 4 ай бұрын

could u crear a video explain the cura profil

@bradsalitrik5132 5 ай бұрын

how are you getting from cura to your K1? USB? or able to upload via creality cloud?

@FilamentFriday 5 ай бұрын

I use USB stick

@julesdrlt 2 ай бұрын

Hello, are the supports well optimised in the profile (can they be removed easily?).

@FilamentFriday 2 ай бұрын

No, that’s print by print.

@dandontknow1 7 ай бұрын

A question for you Chuck - I read on all3Dp that when setting Cura up for Klipper, you should disable jerk and acceleation control as Klipper automatically does all that. Your profile has them on so I was wondering if you'd tried your profile with them off?

@FilamentFriday 7 ай бұрын

Yes. I saw marginal difference. I mainly copied some Creality Print settings.

@dandontknow1 7 ай бұрын

@@FilamentFriday Thanks for the response. I assume you're K1 max isn't rooted and you transferred files via USB?

@FilamentFriday 7 ай бұрын

Yes.

@dandontknow1 7 ай бұрын

Thanks Chuck. Keep up the amazing work!

@GameArtsCafe 4 ай бұрын

Maybe increase your virtual memory settings to at least 32 GB if you're running windows. My slicing in the creality print is instant. However, my CPU is running 16 cores but I've solved issues such as crashes other people were having in other programs with larger project sizes. It seems that without the extra virtual memory, the programs always run slower.

@dickdastardly488 7 ай бұрын

JUST IN TIME! K1 is arriving this weekend.

@FourStringL0B0 6 ай бұрын

Just starting using your profiles. Thank you so much for them. I did notice that the rear fan and side model fan did not turn on during a print. Is there a setting in cura that will control those fans? I had to turn them on manually in the mainsail UI.

@zachb_20 7 ай бұрын

If I give root access to the K1 would I be able to wirelessly print from Cura?

@alpergokhanozkaptan3526 7 ай бұрын

NOPE but u can on cp ps and orca

@robertbekoscke988 7 ай бұрын

I was running cura profiles when I first got the k1 max it was not able to run the side fan when you asked about my profile were you able to get it to run in your g code

@FilamentFriday 7 ай бұрын

Still working on that.

@robertbekoscke988 7 ай бұрын

@@FilamentFriday I have also been saving my parts as step vs stl and the print quality is better in cr print

@Daves3DProjects 7 ай бұрын

@@FilamentFriday I enabled is under the printer settings, Extruder 1 Start G-code... SET_PIN PIN=fan1 VALUE=255; 100% rear ran SET_PIN PIN=fan2 VALUE=255; 100% side fan and End G-code SET_PIN PIN=fan1 VALUE=0; Turn on rear ran SET_PIN PIN=fan2 VALUE=0; Turn on side fan

@Skwisgar2322 5 ай бұрын

This is what I am looking for, one question, is this compatible with the K1C?

@FilamentFriday 5 ай бұрын

Yes.

@steveharmancambridge 6 ай бұрын

Great video Chuck! For the K1 Max, do you know if there are any features of the printer which Cura doesn't / can't support (eg; the Lidar?)

@FilamentFriday 6 ай бұрын

The extra cooling fan requires custom GCode.

@rjet43 5 ай бұрын

how do you install the profiles in cura?

@FilamentFriday 5 ай бұрын

kzfaq.info/get/bejne/fphdjbOTrq-qhWw.htmlsi=yLvXmMeDY4Ao7Rgd

@ronm6585 7 ай бұрын

Thanks CHEP.

@redesign3dp 6 ай бұрын

I do larger prints and was wondering if you could do a K1 profile for .6 or .8 mm nozzles with decent resolution. This would make a fast printer into a turbo printer. Thanks, I love your work. I'm a long time subscriber...

@scotty2salty327 6 ай бұрын

Thanks a million, I assume it works judging by the comments. Haven't been able to try it yet. What's the Start Gcode for the coding for the BED_TEMP.... it gets cut off in your window. Thanks in advance! K1 Max user here. Using Simplify 3D but looking for different options.

@teamcyrmining3673 7 ай бұрын

CHEP please review the Ender 3 V3 KE, it's the true replacement to the classic Ender 3 Pro.

@celiaperez8888 Күн бұрын

This is a good profile, but I have an error you don't seem to have in your model. There are lumps in each beginning of layers, why? :( How to you think I can fix this? I tried slicing in 215/210º, but it keeps the same...

@FazendeiroDePlastico 6 ай бұрын

Im not a owner of a K1 yet. But im here to give a view and like plus a comment to Chuck, hes profiles help alot the community. Thx Chuck.

@J0r 7 ай бұрын

How do you make these a permanent profile in cure? The instructions are kind of vague. Like, pretend I've never done anything in cura before.

@sjorlando7282 7 ай бұрын

Cura lets you save profile variants any time. I have variants of my Main profile because you might have everythign the same except for temp based on the filament.

@carloscobian3989 7 ай бұрын

You should get a Cura Contributor Badge! Thanks Chuck I’ll give it a try, Cura has many settings that I love and can’t find in Creality.

@maciejajewski 5 ай бұрын

Im really proplexed why does it take so long for your benchy and with such poor quality. My K1C prints absolutely perfect benchy in 16 minutes.. im only looking at cura as i cant find treee support options in creality print

@johannsieger3741 6 ай бұрын

thanks for really good input, greets from Austria ,..Joe :)

@mrfoameruk 7 ай бұрын

Just when I weaned myself of Cura and learned Orca (which I am getting used to) I hear Cura is better. I thought Orca was the death knell for Cura but it seems not.

@ledzpg 2 ай бұрын

2:51 1500mm/s² accels? You should bump it up, you'll get better speeds overall

@Awiatan1 2 ай бұрын

where g code start end? ?!

@Awiatan1 2 ай бұрын

G Start ; K1 Custom Start G-code M82 ;absolute extrusion mode M140 S0 M104 S0 START_PRINT EXTRUDER_TEMP=[material_print_temperature_layer_0] BED_TEMP=[material_bed_temperature_layer_0] G92 E0 G92 E0 G1 F2400 E-0.5 G END M104 S0 ; turn off temperature G28 X0 ; home X axis M84 ; disable motors

@DiabloProcentoPersonal. 2 ай бұрын

Thank you so much :DDD

@DiabloProcentoPersonal. 2 ай бұрын

Hey, now i tried it and it automatically sets my print temperature to 240 ´c, do you know how to fix it ?

@Awiatan1 2 ай бұрын

@@DiabloProcentoPersonal. no

@DiabloProcentoPersonal. 2 ай бұрын

@@Awiatan1 Do you have the same problem ?

@Awiatan1 2 ай бұрын

@@DiabloProcentoPersonal. no, because I use the creality cloud application and I found the code on the Internet

@fcxpeople8685 11 күн бұрын

Can I use the K1’s start and end G-code on the K1C? Thank you.

@FilamentFriday 11 күн бұрын

I really recommend using Orca Slicer. It’s way better.

@fcxpeople8685 9 күн бұрын

@@FilamentFriday So the K1 & K1C G-code is the same setting on Cura? Or I should just orca?

@FilamentFriday 9 күн бұрын

@fcxpeople8685 - Use Orca is my recommendation. The latest Creality Print v5 is now based on Orca as well.

@jeffmcguire5241 7 күн бұрын

YES

@akaiphone 6 ай бұрын

Hey bud, the nozzle temp jumps to 240 when the print starts. Any idea why?

@sprN0VA 7 ай бұрын

Thanks for sharing!

@carpaithian 7 ай бұрын

Curious, what would the result be if you spent time fine tuning on each slicer equally? I could be wrong and missed something, it appears like you put more effort into refining the parameters for Cura whilst leaving the others stock. I wonder what optimisations you could make on the other 2 slicers. Additionally you never explained why you skipped the orca slicer for the compliant part. Was that an oversight? Good video apart from these observations :)

@FilamentFriday 7 ай бұрын

I’ve had a lot of requests to move my Cura profiles for Ender style to this. I’m not as experienced with the other slicers. Orca just doesn’t deliver for me. The Rober print was fine but much slower with Orca. So I just skipped it.

@carpaithian 7 ай бұрын

@@FilamentFriday Understandable, I'd love to see you put your expertise into other slicers, if anything it would be a great lesson in showing a slicers potential for optimisation :)

@antoniorios3856 7 ай бұрын

volumetric flow for most of the filaments are low in the slicer I would recommend increasing PLA and ABS to 20mm3/s

@antennasbc 7 ай бұрын

how do you do that?

@antoniorios3856 7 ай бұрын

@@antennasbc under filaments, change the volumetric flow for the filament

@paulschulze3417 7 ай бұрын

@@antoniorios3856Is this setting in Cura 5.4.0? I can't seem to find it.

@antoniorios3856 7 ай бұрын

@@paulschulze3417 bro, Google

@MrElasky123 6 ай бұрын

Thanks for doing this, one thing I noticed is after the print is finished, the bed doesn’t move down which makes it hard to remove the pei sheet. And also travel speed is set to 500 and can’t up that for some reason.

@Kevci4 6 ай бұрын

Add this to the second to last line of the end G-code in Cura "G1 Z150 ; move Z axis back down" All it does is move the Z axis down 150mm so you can take the bed off easily. Seems to work out for me!

@jorgelbotelho8363 7 ай бұрын

Maravilha meu brother parabéns

@davewilliams8050 7 ай бұрын

I noticed recently that Creality Print when selecting Advanced options for modifying a print profile has a Change Print Color option apparently for the K1 series printers. Upto five colors with changes occurring at different build layers. Have you tried using this feature? I still have my original Ender 3 V2 which I use for multicolor prints. Can this be done using a K1 Max. This might make a popular KZfaq video if it can be done.

@davewilliams8050 7 ай бұрын

Sorry I forgot to mention this option is in the Infill parameter section.

@FilamentFriday 7 ай бұрын

I’ll check it out. Thanks.

@justinchamberlin4195 7 ай бұрын

I just don't get what people see in OrcaSlicer aside from the multiple build plate thing. I've tried it with my SV06 Plus and Ender 3 and it was frankly a terrible experience, during slicing and in terms of print quality and with the slicer straight up ignoring at least one of my chosen settings. I'm sticking with Cura and your profiles for my Ender 3, and the MAK profiles in SuperSlicer for my SV06 Plus....I can give up being able to slice multiple build plates to get good print quality, decent print speeds, and to know that what I ask the slicer to do will actually be done.

@paulschulze3417 7 ай бұрын

Are you planning on continuously updating these profiles? Good stuff 👍

@FilamentFriday 7 ай бұрын

As time permits.

@mattb6649 7 ай бұрын

How are you controlling the side fan in cura for the k1?

@jmogyoro 7 ай бұрын

I just loaded the profile for K1. Side fan is not on, nor is there a place to control it that I can find. Maybe somebody knows. So it kinda defeats the point of having a fast printer if that fan is off. Controllable in orca, no problem.

@twistcee115 7 ай бұрын

script that looks for fan 100% code and then changes it to M106 S255 M106 P1 S255 M106 P2 S255 @@jmogyoro

@ReticentEcho 6 ай бұрын

Tried this profile on my K1 Max to print the side spool holder you created, it did not work out for me, I wish I knew why, had poor layer adhesion and under extrusion.

@FilamentFriday 6 ай бұрын

Bambu slicer now has Max profile and it works well.

@WerWieWas-ug4bb 7 ай бұрын

How did he controll the big fan on the right side with Cura?

@Daves3DProjects 7 ай бұрын

What I did was add these lines to the Extruder1 gcode... Start: SET_PIN PIN=fan1 VALUE=255; 100% rear ran SET_PIN PIN=fan2 VALUE=255; 100% side fan End: SET_PIN PIN=fan1 VALUE=0; Turn on rear ran SET_PIN PIN=fan2 VALUE=0; Turn on side fan Note: If you want to turn on the LED you can use... SET_PIN PIN=LED VALUE=1; Turn on LED SET_PIN PIN=LED VALUE=0;Turn off LED

@justhereforthalolz 7 ай бұрын

He didnt. And if he did, he plans on putting it behind a paywall is my guess on why the silence on an answer to that (patron, etc)

@WerWieWas-ug4bb 6 ай бұрын

@@Daves3DProjects thanks for this gcode...

@hammer_thyme 7 ай бұрын

I use the default setting for orca slicer, I get about 45 mins on the benchy and no quality issues. Perhaps you have an outdated version? Edit: Using the K1

@davidfinger2663 6 ай бұрын

Looks very promising. I'm especially interested in finding a K1 Max profile.

@Torskel 7 ай бұрын

Need KE review

@ensardikmen6064 2 ай бұрын

where is g code

@francescoorlando221 7 ай бұрын

In my case isn't working well (with hyper pla). I printed the same object with crealityprint on standard profile and it printed very well and fast. With the customs profile there are some underextrusion on the edge, and poor details and longer printing time. Probabibly little better first layer. Idnk why...

@k0rz4k 6 ай бұрын

Check the clearity calibration tutorial, and make Fine tunning for each filament brand with creality slicer

@safrak 2 ай бұрын

Круто) снимите видео про K1С

@SavijCoder 7 ай бұрын

Any chance you can create a K1 Max profile for Prusa Slicer? I just like it better feature wise. Also I'm baffled why Orca slicer has such a different end product. It's really popular but I have had to use Creality Print just because of quality and print times. Plus Orca sliced models always come off the bed for me while CP does not with same models.

@rlbrlb5109 7 ай бұрын

So how does the 16min benchy that comes with the K1 Max accomplish the print so fast. The quality of that print is very good for the speed. Using normal esun pla+. I am trying to replicate that speed. 42 min just seem very slow for high speed machine.

@mrfoameruk 7 ай бұрын

I would say my 16-minute benchy was perfect. Maybe it's because its a new machine and does not got worn parts that introduce artifacts etc. Also, it uses hyper PLA which is a faster filament. Perhaps print the 16-minute benchy using ordinary PLA and see if there's a difference (it might just jam the extruder though)

@gamingscorpionindia1995 7 ай бұрын

16 min benchy have less infill and is tuned to print faster than usual. The quality might seem good but the settings of 16 min benchy aren't reliable for other prints specially functional prints that might require tight tolerances OR that have steep overhangs

@tired5925 7 ай бұрын

Probably slow acceleration and jerk and high minimum layer time

@rogerramjet69 4 ай бұрын

your profile cant be imported... quality type 'standard' is not compatible with current active machine definition 'fdmprinter'

@FilamentFriday 4 ай бұрын

Use Ender 3 pro machine profile to start.

@celiaperez8888 Күн бұрын

@@FilamentFriday I did this and worked. The mistake was starting with a custom FFF orinter, just in case anyone had the same problem.

@SooperBeez 7 ай бұрын

why use cura 5.4 and not 5.6?

@FilamentFriday 7 ай бұрын

So those with 5.4, 5.5 can also use it.

@SooperBeez 7 ай бұрын

ok@@FilamentFriday

@riodave4954 7 ай бұрын

I don't understand how your worka profile and the front of Benji looks so c***** I've been using orca for a while since root And I've never had that issue. Do you even have the side fans on

@FilamentFriday 7 ай бұрын

I saw the same results on the X1 so I may be missing a setting in Orca Slicer. I’ll check that out. Thanks.

@riodave4954 7 ай бұрын

@FilamentFriday I know orca added some settings so u can have three aux fan (side fan) run and I had to use mxxx I don't remember to get the Exhaust fan to spin. Good luck! Also, I've been working on tpu other than the old filament. I got it down now :) but took off the chain for the ptfe tube, which works much better and no clogging

@InfinityDrones 7 ай бұрын

@@riodave4954 do you have a tpu profile. Whould love to try it if you do

@FilamentFriday 7 ай бұрын

@@riodave4954 - I appears I need to upgrade it again to get those options.

@chadhowell1328 7 ай бұрын

42 minute benchy in stock settings would upset me compared to the p1p or p1s.

@cosminlesutan3574 7 ай бұрын

Now slice it on default for those and you will get the same... don't compare the custom g-code that comes with the printers with reality

@A13tech 7 ай бұрын

so 17 minutes benchy is only marketing and it never gonna print like that in reality ? Im still in ender 3 suffering trying to solve whats next...

@FilamentFriday 7 ай бұрын

It’s a custom GCode file they include with the printer.

@A13tech 7 ай бұрын

@@FilamentFriday so its a scam basically. You can not get anywhere closer during normal use, am I right ?

@zblurth855 7 ай бұрын

@@A13techno you just need to Know what you want from your model, the speed benchy need to have less infile / wall pushing the speed in the internal section, it is just well tune but not on the same setting as a base benchy, you could probably slice a faster benchy if you wanted, juste not a strong one

@A13tech 7 ай бұрын

@@zblurth855 I see. I'm a little bit disappointed that it is "unreal" to push to that speeds. I expected fast print as they claim and not Ender 3 speeds with the same results. I don't have experience with corexy machines and I want to buy one.

@Daves3DProjects 7 ай бұрын

I can do a 16 minute benchy in Cura with my K1 Max. I can do it with Creality Print too. They are not profiles you would use every day, though. To me, realistic speed is 300mm/s with 12k acceleration. I can't wait to compare what I have been using with Chuck's profile.

@EggplantVolcano 7 ай бұрын

I think it’s funny that you spent hours upon hours trying to get the K1 to work with CURA when you said yourself that the X1 Carbon came out in the same time and quality out of the box. Not saying the K1 isn’t a good machine, but the X1 is pretty good for ease of use and not wasting hours trying to get it to work

@joshuacolwell 7 ай бұрын

He’s doing this to help his viewers who have the K1 or K1 Max.

@EggplantVolcano 7 ай бұрын

@@joshuacolwell I understand that. But also give credit where credit is due. I am curious if he then spent hours trying to improve the X1 to make it better. A lot of people are trying to decide if the K1 is worth it after all the issues they had at the start. I think it’s improved a lot from first release, but still leaning towards Bambi Labs as it seems to work as well if not better than the K1 out of the box. Add on AMS and I still think it’s a solid winner.

@leo3times 7 ай бұрын

@@EggplantVolcano I was going to jump on the P1S W/ AMS but I couldn't do the Closed source and cloud connectivity. Just questioning the whole thing, and I'm sure there's others with the same issue. Love the K1 Max so far (2 weeks in)

@garylester55 7 ай бұрын

@@EggplantVolcano, Hi. I just bought my K1 one week ago, I printed the three test prints that came on the flash drive, (they also are downloadable from the cloud), with no problems super fast, the benchy took 16 mins to print with no flaws. There was a firmware update available, which I did do before printing. Creality do have their own software for creating models and printing, so I would say, it's the other software's that are causing print problems, that's why there is lot's of fine tuning to do and each time you make an ajustment you have to do a print until it's perfect or to your satisfaction. Cheers

@seowitz 7 ай бұрын

We get it. You get what you pay for. Thank you captain obvious. Not everyone can afford or is as invested as you are to justify the cost of a Bambu Carbon X1. You're willing to spend the money for a Bambu. Not everyone is but still like 3d printers that print fast. So for the people that are interested in a fast printer that's lower cost, CHEP is doing what he can to make a K1 live up to it's potential despite the rush to market and lack of development or support from Creality.