Thanks. No it's not me. Thanks for the heads up though.

I would say that somebody had been into this unit at some point. Thanks for watching them.

Either get a core and build that one. If the customer wants to you can do used or reman from the dealer. Customer opted to send this to a reman facility as they quoted him a super cheap price. We got the unit back and installed it and it was throwing the output speed sensor code. Remember in the disassembly I siad it was bad? Well I knew right then what they had done and why it was so cheap. They used alot of the bad parts again. Customer decided to have us replace the output speed sensor. Once we got the pan off sure enough. There was the bad speed sensor and thermal valve that was broken was in there also. We put a new thermal valve and speed sensor in. Transmission still did not work properly. At that time we bowed out of the deal and told them to take it to the rebuild facility. There's a reason they are so cheap.

Siyre

Thanks for watching.

Tons of things. First 3 things I would look at would be mounts, engine included, rear end backlash and u-joints.

@@CurmudgeonTransmission I’ll definitely take a look at it!

Do you have the A500 or the AW4?

Torque converter is bad, bushing in the housingthat the input shaft slides through, bad Techm or valve body problem.

Forgot, since this is a Gen 3 it could also be the Lube On Demand Valve in the pump. Both Sonnax and Transgo sell a repair for it.

@@CurmudgeonTransmission thank you ser and god bless