Custom 2022 Standert Pfadfinder

Рет қаралды 11,419

2 жыл бұрын

Here's the bike I've been building since October.
The second to last of the family bikes' videos. Subscribe for new videos every Tuesday!
Follow me on Instagram for daily content: / stachepower

Пікірлер: 54

@emersonsenseman2182 2 жыл бұрын

Bob is always making an appearance. Love it man! Keep up the awesome vids!!!

@StachePower 2 жыл бұрын

thanks doode

@HarryASMR 11 ай бұрын

Came for the bike, stayed for the doggo! Sick looking build my man!

@riskyrax 4 ай бұрын

Sick steed built for speed 👌

@davewattimena3491 Жыл бұрын

very nice

@crailwah 8 ай бұрын

Very beautiful

@StachePower 8 ай бұрын

thank you so much!

@danielchoi8808 2 жыл бұрын

Parabéns pela bike, ficou fantástica. Logo menos a minha chega tbm. hehe

@StachePower 2 жыл бұрын

muito obrigado! aprecia-a :)

@jpragmatic7759 Жыл бұрын

This is a gorgeous build! Nice one. My one hang up with Pfadfinder is the clearance! Any chance you can speak on your experience? Personally if it could squeeze 42c it is perfect

@StachePower Жыл бұрын

thank you! you can only fit 38mm tires on 700cc wheels but I’ve ran 45mm tires on 650b wheels on this bike!

@dakalla Жыл бұрын

I love the melanzani color that is available, but also thinking about the Erdgeschoss frame. How wide do your 650b tires meassure exactly? Do you think you could add annother 2mm and run a 47mm tire?

@StachePower Жыл бұрын

I sold the bike so I can’t measure the tires but I could definitely add 2mm. also be mindful that the pfadfinder is aluminium and the erdgeschoss is steel

@CsoSly Жыл бұрын

FYI, both frames are steel. Pfadfinder frame is made from high-end Columbus steel tubing, Erdgeschoss is stainless.

@StachePower Жыл бұрын

@@CsoSly lol I was convinced it was aluminum for some reason but oh well!

@stormdewise1 2 жыл бұрын

This bike is gorgeous smh

@StachePower 2 жыл бұрын

thanks a lot dude!

@nixonjoe Жыл бұрын

Beauty of a bike mate 👌. Did you size down on your frame ? I’m between a 52 and a 54

@StachePower Жыл бұрын

I did size down, I've just grown to like smaller frames

@aucklandtoday9847 9 ай бұрын

What size Allez did you ride pls

@braingainz6407 2 жыл бұрын

Very nice build! Is there a big Difference in comfort from the 650B to the 700c? I ride a norco section steel which is pretty much the same frame. I ride 650B alloy hunt wheels with 43mm Panaracer Gravelking. With the 43mm the radius is Not as big as a 700C. I think i feel the Vibrations more than with a 700C. I guess a 700C wheel with a 38mm tire would be more comfort. But i dont have the direct comparison. What Do you think? What are your experiences?

@StachePower 2 жыл бұрын

in my experience 650b is extremely more comfortable but also much slower. then tires make a difference too but I think that’s more personal taste

@dpaeme Жыл бұрын

@@StachePower Can I ask: how much clearance do you have between tyre and frame with the 650b's & 45mm Cinturato's?

@StachePower Жыл бұрын

@@dpaeme quite a bit, to be honest. I'd say you could fit 48's, maybe even squeeze some 50's in there

@marcofigueira2810 2 жыл бұрын

Parabéns grande bicicleta. Uma peça única. Abraço

@StachePower 2 жыл бұрын

muito obrigado!

@motomoto898 Жыл бұрын

Hi thanks for the video. You mention you have a size 50, and I was curious how tall you were? Sizing is always a headache for me as I’m quite between sizes I’m 170 cm with a 81.7 inseam (32 inches). Cheers !

@StachePower Жыл бұрын

hey! I’m not sure about my inseam but I’m 169cm tall. I’m in between sizes 50 and 52 so it depends on if you want a more relaxed (52) or a more aggressive fit (50)

@cornellmiller2315 Жыл бұрын

Great ride, fun fact my dads bmw has pirelli centurato wheels lol 🤷‍♂️

@henrybeck9446 2 жыл бұрын

looking at those bars for gravel. how do they feel?

@StachePower 2 жыл бұрын

haven’t done enough miles on gravel with them yet to give an honest opinion but so far so good

@thomasdimopoulos7306 9 ай бұрын

is there any adapter you use to swap between 700c and 650b wheelsets?

@StachePower 8 ай бұрын

no adapter needed!

@charlesserilas223 Жыл бұрын

I just found this bike on the pro's closet. You did not like it?

@StachePower Жыл бұрын

I did! but I just prefer MTBing to Gravel :) definitely hurt to sell it

@charlesserilas223 Жыл бұрын

@@StachePower I bought a Pfadfinder partly on your advice so I was worried ! 😅

@StachePower Жыл бұрын

@@charlesserilas223 ahah you're going to have a great time on it

@oipawn9049 Жыл бұрын

Hey man, is that a passerby inside the seat tube, into which the zipp seatpost is inserted?

@StachePower Жыл бұрын

not sure what you mean

@oipawn9049 Жыл бұрын

@@StachePower Well, I see an aluminium ring in the seat-tube, is that an alloy spacer inside the seat-tube?

@StachePower Жыл бұрын

@@oipawn9049 no spacers

@jonmc7583 Жыл бұрын

Is this the one at The Pros Closet right now?

@StachePower Жыл бұрын

exactly the one

@jonmc7583 Жыл бұрын

@@StachePower do you happen to remember how much steerer was left? Thinking about it for my wife.

@StachePower Жыл бұрын

@@jonmc7583 enough for 2 to 3 regular spacers...

@jonmc7583 Жыл бұрын

@@StachePower 20-30mm? Thank you!!

@StachePower Жыл бұрын

@@jonmc7583 couldn't say for sure but maybe

@BrwnRc Жыл бұрын

how do you find this rides compared to carbon?

@StachePower Жыл бұрын

definitely feels heavier and slower but also more robust and safer

@BrwnRc Жыл бұрын

@@StachePower forgot this was steel.. and how does the Kreissäge compare to carbon? Thanks for your reply! Love The builds man theyre sick

@StachePower Жыл бұрын

@@BrwnRc this is actually aluminum and the Kreissage feels closer to carbon than this one but still, it does feel less fast, heavier but sturdier and stronger