CUSTOM DIY-WHEELCHAIR,HOW TO MAKE all terrain,off-road,homemade trike

Рет қаралды 52,474

7 жыл бұрын

LOTS OF UPDATES IN DESCRIPTION!
Link to Mock-up of MKII version: • Mock up of MKII DIY al...
This is my first KZfaq video and did not want to try doing any editing on my Chromebook so what you see is my "one take, that will do,unscripted approach" :)
Since recording this I've had to replace the Ball Catch spring with rubber and a plastic disk to make it stronger. Other than that its pretty much the same. I can easily pass over grass and woodland. I have powered up a 4" curb with ease and safety. I have been up a concrete ramp so steep that the tyres spun.
Future improvements I may be looking at.1) having the main cross part swivel so it lays flatter in the car.2) Or have it hinge so it can go in a smaller car. But for now I just want to enjoy it this summer.
EDIT: I am also now thinking I could have gone with a bigger back wheel so I could cut the stem down and make it look less "bike like!. Better still use suspension forks. ;)
ANOTHER EDIT: Started to get stuff together for a MKII version. Going to have it fold completely flat for the car and looking at getting a chair with easily removable back to also lay flat.
YET ANOTHER EDIT: If anyone is building a similar one and has seen the really expensive ones out there I have realised what they are using for the chair,It is a GO-KART SEAT an expensive one mind but that is what "I" think it is ;)
UPDATE: this chair is now halfway through its new modifications when I realised it would be better if it broke down even further as I am currently having to drive the car with one rear seat down (Ford Focus). I started to look at other box sections that come apart easily. I found what I was looking for on my wife's exercise bike ;)
Not wanting to cut it up I started looking at others for sale locally. I then came across a recumbent one. This is what I am currently looking for now at the right price as it has a really sturdy seat just built for the job. So watch this space. Will do another build video and will stick a crash helmet on and do some action stuff with the next one. Will try and keep the welding to a minimum so more can build their own. But if your thinking of doing this look at exercise equipment as I am.

Пікірлер: 85

@ashstubbings2603 3 жыл бұрын

Firstly my good man, don't ever apologise for a wonderful Yorkshire accent! Most of my wife's family are from Hull! And secondly, THANK YOU, THANK YOU, THANK YOU, for recognising that us mere mortals cannot afford these things! I'm currently looking into funding for a Grit Freedom Chair, which is a very similar thing to what you've designed and built for yourself. I say 'looking into', because I know full well that I won't be able to get the funding to be able to afford this thing. Firstly, it's manufactured in America (the first hurdle I've got to negotiate), secondly, as you've rightly pointed out, these things cost an absolute arm and a leg, (it works out at nearly 5 grand for goodness sake!) and thirdly, at least 90% of the funding available for these things is aimed at kids, or least for people under the age of 25! I'm a 48 year old man, for goodness sake, what chance have I got! I want to enjoy what life I've got left, I want to go off the beaten track a bit. So I need something like this! But I can't afford it. I wish the manufacturers of these things, would get it into their skulls that the very people that need these things, are also the poorest people in our societies, the disabled people who, generally speaking are on benefits! I guess what I'm trying to say, is congratulations for taking matters into your own hands, and actually building one of these things yourself, and getting yourself out of the predicament that many of us find ourselves in.

@davehonigschmidt3309 2 жыл бұрын

Very inspirational. Last comments were over a year ago, but this deserves to be seen by anyone with a disability. I am wheelchair bound and live next to the ocean. Slowly building up parts to make a beach accessible electric wheelchair for myself using an old wheelchair frame I had. Going onto the beach is why I moved here and I have to adapt a tad to be able to do so. Like so many others I am disgusted with the price of anything having to do with disabilities. Looking for an off-road electric wheelchair and the ones that boast being affordable are asking over 5k. That is around 4k more than I have to spend on a chair. Only issue I am running into at the moment is how expensive the raw parts are. I have about 75% of the parts I need and had spent around 600.00 USD so far… and that was trying my best to be fragile. I still need a few more Fat Tires and rims and those are not cheap. Thank you again for posting this.

@robertsdp92r Жыл бұрын

One of my goals to build a wheelchair for the beach.

@Murderball9 Жыл бұрын

This thing is beautiful! You nailed literally everything. I can’t get over the fact the seat is an office chair. Looks so clean from the side!

@randycrowe4978 Жыл бұрын

Awesome job. I am passing this on to my son. He is a tinkerer and has wheelchairs, maybe he can get some ideas from your build. God bless ya.

@rolisonpaint3 3 жыл бұрын

I like your accent, your attitude and your chair

@upcyclemichael 6 жыл бұрын

Thank you. I've been looking at expensive adaptations for my 10 year old sons wheelchair and I honestly can't understand why things to improve a child's quality of life cost so much, it's outrageous. Now I feel competent enough to build him a chair he can use in general life.

@shawng5799 6 жыл бұрын

Thanks I hope the video is of some use to you. Thing is to try, and see what you end up with. I do all my planning in my head and then it just seems to come together. I am just going through it all again with my MKII version but it has turned out to be very engineering intensive and even landed me in A&E at one point. Almost there now though just in time for summer again.

@upcyclemichael 6 жыл бұрын

Good luck with the mkII I look forward to seeing it, stay out of a&e.

@charliecorke Жыл бұрын

Fabulous ideas. Thank you for sharing

@databanks 6 жыл бұрын

Great work of getting the bike rims and wheelchair hubs to work together and an overall smart piece of work. Please keep sharing your creations

@wildkatoz 6 жыл бұрын

Thanks for posting your work, every wheelchair user that has read of any chair ever invented, and put to market, has said the same as you! The first being that the expense is usually out of reach of someone in a chair and the second thing I found, was that the best ideas rarely come to fruition, or are usually only made or sold in countries like the US or China LOL! I have a few older bikes and 4 wheelchairs here that I could and should use as the basis for making a chair with a lever drive, that can get me up and down the hilly terrain we have here, without doing more damage to my shoulders! Cheers!

@shawng5799 6 жыл бұрын

I just wanted to see what I could build, I had tried to go on grass on my expensive lightweight alloy wheelchair and it simply didn't. I bought a cheap standard wheelchair from Gumtree and cut it down. Then one night I took the back off altogether and sat on it backwards. I managed to get out of my drive and up the curb at the other side of the road but it was all over the place with every push. It is my first attempt really. I have not monetised the video at all and there should be no adverts watching it. I just put it out there to try and help others. I am very surprised that no one has said"Well lets see what it can do!" But that will be for my next project now.

@MsDig65 5 жыл бұрын

Amazing, so talented. Just what I could do with , I've been looking for an off road chair but they are stupid money .

@unclearvin3718 5 жыл бұрын

Howdy Shawn, and bravo for your gumption and ingenuity you have earned my admiration.

@ZombiieLoveQuadCreations 7 жыл бұрын

Omg!!!! Genius!!.. we just got back from a trip to a place not so wheelchair friendly and we're thinking of a way to build one that I can use up there next time and something like this would be perfect so I could push myself around that ground!.. thank you for the idea!

@shawng5799 7 жыл бұрын

Thanks, already building a more improved version. Just got a BMX bike with 20" mag wheels so I can use one for the rear wheel.Dragged a 4" log about a forest the other day with that smaller 12" rear :) May end up with a slightly longer wheelbase but will put a caster on the front so I can tip onto that should I need to get through doorways or into a lift.

@Addison_4 3 жыл бұрын

OMG I love you Wheel chair

@shawng5799 7 жыл бұрын

Just seen the latest Game of Thrones trailer and Bran is in a wooden version of my chair :)

@jasongooden917 2 жыл бұрын

this looks like the prototype for the Mountain Trike

@WarBeardTheRed 4 жыл бұрын

Simple and perfect.

@leewalters2002 6 жыл бұрын

amazing, I want to do a project similar to this for my daughter

@symonf1966 6 жыл бұрын

Outstanding work

@shawng5799 6 жыл бұрын

Thanks! I only have about two days worth of work left to carry out on the MKII version. I could get it finished next week but it is so cold now I wouldn't be able to spray paint it. So I have done all that I want to until it gets warmer. Its got a new bigger rear wheel 20" and a seat from and exercise bike so it is much stronger and packs up smaller and may even be lighter. Will do some off road videos with it when I get it done.

@symonf1966 6 жыл бұрын

shawn G I look forward to seeing that one. I like going to Volkswagen shows but as then he always Outdoors in a field the only one I can go to now is the VolksWorld show which is an indoor show. I may need to copy the Mark II.

@wallybclaremont Жыл бұрын

Thanks for the info!

@imafridi 3 жыл бұрын

i like it , its similar to Trekinetic - All Terrain (you can see that to get more idea), please update us with this as its looks so good and so cheap. please make a full video .love to hear from you soon. will be waiting for the updated video

@sparklepix 3 жыл бұрын

genius, foudn this looking for my next chair - I think youre awesome!

@sparklepix 3 жыл бұрын

Oh and my family are all from Yorkshire but ended up in devon!

@amabitsapiens 4 жыл бұрын

Amazing work - thank you very much for taking the time to share the process and specs with us. I'm in a similar boat to you and many people commenting in that the all terrain chairs available commercially are way out of my price range (given limited disability income), and this could be a life changing innovation. If you're around this channel & still answering questions at all, might I ask why you chose to put the wheel on the back rather than the front? A lot of designs I've seen place the third (child bike) wheel on the front, and leave a back wheel off completely, which cuts down on length and theoretically makes it a little more portable. Your thoughts?

@shawng5799 4 жыл бұрын

Climbing curbs and going up slopes. If you have a small wheel at the front you have to put half the weight on it. You have to wheelie it up a curb then there is nothing to stop you from tipping out backwards. With the two big wheels at the front you can easily "climb" up and over things with a the rear wheel for stability.

@fyrstorm2010 5 жыл бұрын

Looks good, the only major thing I would have changed would have been to move the axle to the bottom of the main bar.

@robertsdp92r Жыл бұрын

great idea if you are able to move your legs. The Idea could be modify for a paraplegic I suppose

@markgurr5614 6 жыл бұрын

Wow fantastic video's 🎥 📺

@shawng5799 6 жыл бұрын

Thanks! Really pleased how the MKII is coming along though I have had to slow down with it since a really bad cut with a hacksaw two weeks ago landed me in A&E :(

@delcat8168 5 жыл бұрын

Nice but needs some gusset plates or triangulation IMO, there is a lot of leverage on that square section tube. I'm V interested in how it lasts as my son is in a chair.

@rockykoast7065 4 жыл бұрын

I like the idea of this very much! I'm surprised you call it heavy at 18kg...my standard wheelchair I bought secondhand here in France comes in at 23 kg. Itld be great to see some footage of you using this too! I'm looking really for an electric wheelchair solution now as I'm starting to have trouble with my hands now.

@shawng5799 4 жыл бұрын

Development stopped when a hacksaw injury sent me to hospital. I then modified a standard wheelchair for off road use. I got really proficient at wheelies😁👍

@rockykoast7065 4 жыл бұрын

@@shawng5799 Well done! I'm not very good at wheelies. I may need to get some sort of electric wheelchair soon. I have a progressive neuromuscular problem.

@BundaBundaDeadly 5 ай бұрын

So smart..🎉 I am going to try it.

@iantheinventor8151 2 жыл бұрын

Nice work, I wonder if the small wheel was at an angle wouldn’t that help the wheel stay straight. The front fork on a bike is at an angle that helps keep the wheel straight, shove a bike & let it go & it will correct itself & stay upright.

@adansyahdan9319 2 жыл бұрын

great design sir... can i get your permission to make one like yours for my disabled mother-in-law? Thanks

@shawng5799 2 жыл бұрын

You certainly can👍

@adansyahdan9319 2 жыл бұрын

@@shawng5799 okay, thank you sir :)

@unlisted5150 7 жыл бұрын

fantastic build. I have been looking at building my own chair since my mobility went down hill but after seeing this I realise I have been over thinking all aspects. I will be knocking this up ready for the summer holidays as the kids love playing in the woods at the bottom of the garden but no chance getting a normal chair down there! just a thought: if the rear forks had been welded at a 45 degree angle or so that the box steel and fork where welded at 90 giving the wheel an angle whilst seated, would it not provide an easier time keeping it all straight and not swinging out beneath you?

@shawng5799 7 жыл бұрын

That's really good to hear. I literally joined the points with the lease number of lines to make it a simple an as easy as I could for myself.

@shawng5799 6 жыл бұрын

Only just seen the bit about the angle of the wheel,sorry about that.I found that if the forks are not upright the wheel is super hard to turn. You can try it yourself first holding a chair castor in your hand and moving it about. I did :) Also if it is not straight up and you do get it to turn you can feel the back end rise up and fall. This does happen if you get the two front wheels up a curb leaving the rear behind you can fell it doing all manor of strange things.Including flipping sideways against the curb stopping you from getting up :(

@onegoodjoe 11 ай бұрын

I just want something that can handle an unplowed snowy sidewalk.

@Pablo-so1df 2 жыл бұрын

Hey Shawn, I was watching at your video and I think it is a great design. I have a disability and I am looking to make my own Diy wheelchair, I already made 3 versions of it but I like the simpicity of your design, do you mind if I use some of your design ideas for myself? Thanks!

@shawng5799 2 жыл бұрын

That is why I made it your welcome.👍

@Don-bi6zc 2 жыл бұрын

You are brilliant. Inspiring too. I have MS and I know the day I'll need one is coming. I'm looking for ideas, I spotted the office chair, do you do this kind of thing for work? Thank you

@shawng5799 2 жыл бұрын

I'm a retired engineer,I have done fabrication amongst other things.

@Addison_4 3 жыл бұрын

Oh my gosh it worked

@4y6857 6 жыл бұрын

Shawn G I hope you're still monitoring this post. I have a couple of questions. If it's not too personal a question, how much do you weigh? I weigh about 235 lbs (107Kg, 16.8 stone). Do you think this will support me? Would it be better to have the axle tube be mounted underneath the longitude tube instead of on top? Do you think it would be possible/feasible for the wheels to be easily removable and the lateral(axle) tube and the long tube to pivot to facilitate storage? Thank you for sharing a truly inspired and inspiring design.

@shawng5799 6 жыл бұрын

I weigh 85kg about 190lbs. and the other things you have asked about I am currently carrying out on my MK2 version. Just go for a bigger steel section if you want to be sure about its weight carrying capability. I used what I already had it my garage. HTH

@shawpaperiekas600 5 жыл бұрын

Sorry about the accent?? I love your accent!

@lguerin910lg 3 жыл бұрын

I like your thinking and concept .I am just starting a wheelchair convertion for my diasbled wife so she will be able to go on the local beach .I am no engineer far from it , And yes it is nearly a crime for what fork's charge to buy beach wheelchair's and I don't know How they can charge nearly £600 for a convertion wheelchair kit so it can go on the beach . it is because of this and the fact there are many disabled people who are missing out of not being able to enjoy going on a beach including my wife that I have taken on this Project .keep up the good work . Ps when are you going to add a electric motor to you new designed wheel chair .

@shawng5799 3 жыл бұрын

Sorry for the delay in replying. Due to a workshop accident all work is currently stopped on that wheelchair. You mention electrification of it, funnily enough I have just bought a kugoo M4 electric scooter that I am trying to pass off as a mobility scooter with the vehicle registration department.🤫 Does 29mph😈

@johnnorris9377 3 жыл бұрын

Where can you get the off road wheel chair wheels at a reasonable price ? Everything i have found is 400.dollars for a pair or higher ?

@BushImports 4 жыл бұрын

so you think you could roll the chair with just the tires and not need the push ring? I can still walk but but not much without my legs hurting like hell. I think I would like wheels on the front like a normal wheelchair like the one you have on the back.

@Chriswoodworker 4 жыл бұрын

WOW. What a great job. Do you take commissions?

@shawng5799 4 жыл бұрын

Sorry I'm struggling to do stuff for myself now.

@Chriswoodworker 4 жыл бұрын

@@shawng5799 Sorry to hear that. A great idea never the less.

@rubysmith3143 3 жыл бұрын

have you not thought of powering it 2 x 49 v hub motors

@JonathanChaseHypnotist 6 жыл бұрын

Awesome, all it needs for me is an engine. No grip.

@kellyspeakes8350 4 жыл бұрын

Could I get more information from you about the hub conversion from wheelchair to mountain bike wheels? I am in the process of rebuilding my folding chair with bigger front wheels and a back out-rigger that folds flat. Moving the wheel mounts just to the front of my center line sitting in the chair for better torque and stability.

@shawng5799 4 жыл бұрын

I'll do my best what do you want to know? I counted the spokes and paired the two up. Watched an Australian woman on here lace up a BMX wheel and Bob's your Uncle 😉

@kellyspeakes8350 4 жыл бұрын

@@shawng5799 It has been a long time since I opened a bike wheel and I've never been in the wheelchair hub. My concern is if the axle and bearings have to be completely replaced, or will the bike tire bearings accept the same size axle as the wheelchair. I don't have a bike your tire yet as I'm in the planning phase still so I can't do a physical comparison.

@shawng5799 4 жыл бұрын

@@kellyspeakes8350 I bought two quick release hubs with spindles from ebay and then put them into the bike wheels by undoing all the bike spokes. I did not touch any bearings. I used a battery drill set at minimum torque to tighten the wheel back up and kept going around the wheel increasing the torque setting, it worked really well for me. I then fitted the wheels and spun them and tuned the wobble out.

@kellyspeakes8350 4 жыл бұрын

@@shawng5799 Got it. Thanks. Off to EBay to find the hubs.

@shawng5799 4 жыл бұрын

@@kellyspeakes8350 Count the spokes make sure they are the same and the hubs around the same diameter.👍

@sobreruedas2423 3 жыл бұрын

I like the design, can you give me the measurements? Congratulations

@shawng5799 3 жыл бұрын

I do say what I used but everyone will be different.

@nelrobert2200 5 жыл бұрын

Yeah I know I'm having the same problem with chairs are so expensive so I decide to make my own I met him one that goes 10 miles per hour then I'm making a second one that could 45 50 miles per hour that is controlled by a video game controller

@alagasuvaran4974 2 жыл бұрын

But you did let us see how it works.

@ChrisPage68 6 жыл бұрын

Not sure about the structural integrity. I fear it my torque itself to pieces on really rough terrain. Please take care.

@shawng5799 6 жыл бұрын

Having only 3 wheels it does not get any torque. If it had 4 then it would, but if you lift one wheel on this, it lifts the wheel nothing gets twisted. ;)

@jackiecomer1850 2 жыл бұрын

Cost efficient

@bishalpun3772 3 жыл бұрын

How mohse ruppess

@ephraimcamacho9600 5 жыл бұрын

This is a joke!! Show me how it works! Its all talk!

@shawng5799 5 жыл бұрын

If you look at my other video you will see what happened with this project. The version here worked fine though I wanted a bigger back wheel so it would handle kerbs better. I fitted a new stem and a 20" BMX wheel but I could not get it to work as the angles were all wrong. While modifying it further an accident with a hacksaw landed me in hospital and my wife banned me from the garage. Then I came across an expensive wheelchair for just £100 and within two days I had resprayed it,re-upholstered it and fitted BMX tyres. So the project has not been touched for almost a year. It is strange as I woke this morning I had just thought about a modification I could try and then I read your comment. So watch this space this summer.