Custom Fairway Finding MONSTER! Don't buy a NEW driver before watching this..

Рет қаралды 148,270

4 жыл бұрын

In this video we look at how you can create a custom driver using nothing but different shafts, lofts and weights to create a fairway finding monster! I'd suggest watching this video before heading out to buy a new club.
►SwingQuest UK eBook link amzn.to/2L6OdgC
►SwingQuest eBook link amzn.to/2Eo9th7
►SwingQuest Paperback here UK - amzn.to/2RSfs0U
►SwingQuest Paperback here .com - amzn.to/2GkLZLA
► Official SwingQuest website www.swingquest.co.uk
#Subscribe #Like #Comment
►Become a FREE SUBSCRIBER to PETER FINCH now
bit.ly/SubscribePFGolf
►Book Lesson With PETER FINCH at Quest Golf here bit.ly/1OkIdKM
►Feel free to comment below!
►Remember to hit that LIKE button if you enjoyed it :)
►NEW VIDEO EVERY DAY ON MY CHANNEL
---------------------------------------------------------------------------------
►My Links:
Facebook ► bit.ly/1WWf5jR
Twitter ► bit.ly/1ZygHiY
Instagram ► bit.ly/1WlhRRa
Web ► bit.ly/1ZygU5B
--------------------------------------------------------------------------------
I deliver straight talking, easy to follow, honest, professional, calculated advice to all of my viewers from beginner to tour pro. This tried and tested method of coaching has helped many golfers achieve their personal goals and beyond.

Пікірлер: 283

@peterfinchgolf 4 жыл бұрын

Quick one also peeps. I don’t compare the new set up to my current set up as I’ve already don’t loads of vids with me hammering my M6, it’s longer than the fairway monster + I can hit it higher 👍 x

@iaindaun8022 4 жыл бұрын

Peter Finch Golf is it now not similar to the “original one” mini driver you had?

@julia-6195 4 жыл бұрын

@@iaindaun8022 It has a bigger more forgiving face than the "Original One" mini driver.

@vikrambajaj5797 4 жыл бұрын

Finchy can u hit more draws mate?

@WatsonsWentWhere 4 жыл бұрын

Did it leave any damage removing the lead from the head pete?

@josephnewcomb1737 4 жыл бұрын

Can you do a video on launch angle? I’ve been working on hitting up on the ball and now finding that my launch angle is higher than recommended for my swing speed.

@kiganfive 2 жыл бұрын

I've been playing golf for 30 years now and I'm shocked that I didn't try this sooner. It's been a game-changer for me. Immediate results. I have an old TaylorMade Superfast Burner 1.0 (same one Sneds used a few years back to win at Torrey). I cut the stiff shaft down two inches (now 44.5") and added about 10 grams to the bottom back and toe of the driver. I've had longer and straighter drives than I've ever had before. I liked the results so much I added about three grams to each iron. So much more pleasant to play golf. Feels like it should be illegal.

@richardvalentine4133 4 жыл бұрын

Fascinating video, I have been tinkering with my Callaway Rogue Driver recently. I was fitted with this club and after a bit of a honeymoon period my drives have gone a bit off. I transferred the shaft into an earlier Callaway GBB driver head with the sliding draw/fade adjuster. Fiddling around with this and also fitting a 9 gram sole weight has refreshed my tee shots.

@drew20238 4 жыл бұрын

Excellent video Peter! I tried cutting down the butt end of my driver shaft and threw off the swing weight. Adding lead tape to the head brought it back to D3 and got the best of both worlds, consistency and distance (because I was hitting the middle of the face). Thanks again for the content!

@willemkilian6002 4 жыл бұрын

I havent laughed so much in a long time! Great video! Beast of a bullet driver!🤣😂🤣😂

@TheRedhead87xc 4 жыл бұрын

Great video Pete. I might be tinkering a bit with my driver after this as I’m still trying to get the perfect draw👍🏼

@jonvanwagoner404 4 жыл бұрын

This is BRILLIANT!!!! Lot's of golfers would benefit from this.

@979201 4 жыл бұрын

This is absolutely brilliant!! I will definitely be trying this out soon.

@johnmckechnie3294 4 жыл бұрын

Firstly I've seen you hit, so not surprised that you hit so well!! Secondly, for control with driver I grip at bottom of grip, probably lower than you did in this video. Always enjoy watching !

@nealsokay3243 4 жыл бұрын

Great insights on experiments Peter, keep at it.

@paulmetzger4165 4 жыл бұрын

Great experiment Pete! Looks like a blast

@mikeslater4043 4 жыл бұрын

Great vid Pete, really interesting.. My last 3 drivers i've been fitted into low lofted, low spin models. While they were long I really struggled with consistant duck hooks. Went to Scottsdale Golf and they fitted me into an M6 with more loft (10.5)and the x flex shaft you had there to keep the spin down.. It's been a game changer. Loads more control and hitting a lot more fairways without any noticable loss of distance... Winner Winner ;-)

@willmcmurray6084 4 жыл бұрын

I've used lead tape on clubs many times , and always tuned my driver to my swing quite easily , it's fun to experiment sometimes

@Fletcher72 4 жыл бұрын

Great thinking out of the box video!

@briowulf 4 жыл бұрын

Great content Peter! Very informative!

@chrishartman5383 4 жыл бұрын

Fun video Pete, thanks!

@noahstanley8705 4 жыл бұрын

I think this is awesome and such a good tip especially like you said if you are trying to work on a shot shape this will give you that feeling with the weight so it will start to become natural to you thanks Pete!

@tkomow2 4 жыл бұрын

You and Rick should do another Golfbidder challenge where you can both modify your clubs!

@brentjewell9641 4 жыл бұрын

Peter great video.... Love the idea and thx for the results.... Lead tape is still great to use on irons and drivers... 🤘

@davidpierce2423 4 жыл бұрын

I just added lead to my 52 and 56, 9 grams each. The 52 I placed then dead center stacked for a better ball strike. It was a high middle strike and the weight brought it down to center. 56 I added the on center heel side to move my strike from heel side to more center. Both had the intended affect and I'm pleasantly surprised how the fractionally different strikes have improved my wedge play. Great video Pete!

@nathanbruns7053 4 жыл бұрын

Been debating something similar to this. Love the outcome and idea

@swaydog1977 4 жыл бұрын

Cool vid. Thanks for the work.

@matthewcritchley1214 4 жыл бұрын

Great vid,I'll be experimenting tomorrow. 🏌️‍♂️

@coltssniper 4 жыл бұрын

Phenomenal Pete!!!

@Pierre-tr3fw 4 жыл бұрын

Love your videos Peter! Keep it up :)

@markcook4693 4 жыл бұрын

While we're talking about weird club set ups my brother has a white Diamana driver shaft in a 2 iron head. The kick on that thing through the hitting zone almost sends me down the fairway Thor style.

@michaelbateson8636 4 жыл бұрын

Shortened my Cleveland driver two years ago, best modification I ever made with my equipment. May add weights with lead tape for this summer.

@jamesrevillgolfcoach 3 жыл бұрын

Gonna be trying this. Already carrying it 295 looking for some big numbers next year and working on strengthing my body up for it let's go champ!!

@neiltaylor62 4 жыл бұрын

6.15 would love to hit that on a par 4 in summer would get to the green with the roll on it 💪⛳ Great channel Mr Finch 👍

@waynenash1332 4 жыл бұрын

I actually did the opposite. Moved the weights back and to the heel in my M5(were both in centre track for ages). High draws all day long... The stinger is a beautiful shot, but a bombed high draw is just wonderful to watch

@BurnedWonderer 4 жыл бұрын

Peter Finch, the next long drive champ lol. 6 degrees shesh!

@GolfingMalky 4 жыл бұрын

Loved seeing you back in the studio smashing shots with that bullet driver thingy- give me more data please! Cant see me adding weight to my driver as I dont swing the club fasts enough but I might do it for laugh one day. Could be great or a disaster but its all fun Cheers

@davidabrial5328 4 жыл бұрын

Last summer I added a 2 gram strip (used on tennis rackets) to the toe of my driver to mitigate my drook... Worked on mild ones, probably more as a placebo and a way to remind me that I draw/hook easily 😎

@justinstephenson9360 4 жыл бұрын

I did something similar to my Epic driver. Had the shaft shortened to 44.5" and some extra weight added into the head. Result is a massively straighter driver with no noticeable loss of distance. I could probably bring the loft down as well - must try that with trackman sometime

@adamfrance9372 4 жыл бұрын

Cool vid Peter, great info 😎

@australiansportingphotos2053 4 жыл бұрын

Added lead tape weights to my old driver and it helped a lot. Also added weights to the heel on my 2H & 3W, both I now hit dead straight and would be 2 of my better clubs in my bag

@walleyewannabe 4 жыл бұрын

I cut 2in off my M2 and worked great... had trouble duck hooking and this really helped

@rejaylalloo5264 4 жыл бұрын

Love it!! I kinda have this same sort of setup in theory with my three wood. I'm some one that tends to put a lot of spin on the lower lofted clubs due to my steep attack angle. So I stuck a 70g tour x stiff shaft on a 13° deep face xhot pro. Boom! Heavy, low spin monster that's almost impossible for me to turn over= fairway finder. Again love the vids Pete, showing people how proper equipment setup can improve the game.

@peterfinchgolf 4 жыл бұрын

Rejay Lalloo cheers Rejay

@TarylT 4 жыл бұрын

I once had an Adams DHY 18 degree driving hybrid and had an x stiff 3 wood shaft fitted to it.... and OMG 👍🙈😝 absolute Frankenstein monster of a club 😂

@allenwalker9412 4 жыл бұрын

Really enjoyed that great job keep the tips coming. I slice my Driver so the tape may help THANK YOU

@peterfinchgolf 4 жыл бұрын

Allen Walker no worries enjoy

@Michael-oo5gk 4 жыл бұрын

This video is really helpful

@leepopham-lithgow5104 4 жыл бұрын

Great vlog Pete

@olson_ 4 жыл бұрын

Had an M3 with a 1 inch shorter shaft, changed the sliding weights to heavier ones and added lead tape to slow tempo down. My miss is a quick hook or a block right. The result of the heavier SW was a smoother tempo and I felt I could go after the ball more without being scared of the quick hook. The head recently cracked and Im waiting for a new M5 head from TM. Will probably go for the same setup.

@markderby9416 4 жыл бұрын

Great video Pete very interesting video ha ha🤔😂

@jacobterry4023 4 жыл бұрын

LOVE IT PETE 👍🏽👍🏽

@peterfinchgolf 4 жыл бұрын

Jacob Terry thank you

@mikereed3287 4 жыл бұрын

I have tried my 3 wood shaft in my driver (both G400 Ping clubs). I struck the club better and hit it farther. I, too, had a bit of a draw problem with the club but did not think to add tape to change the club face closing rate. I will try all you suggest and see if I can make a better driver for myself. Thanks for the insight!!

@kvgolfa 4 жыл бұрын

You should tip the shaft. Cuz you basically turned it into a 3 wood. Also lead tape doesn't "slow down" any part of the head. It just moves CG a bit to move gear effect. Also by shortening it so much, you've flattened the effective lie angle which will also make it go right

@BHApelqvist 4 жыл бұрын

This season I did put an extra weight in the front track of my M1, played it 44", 8,5° and with total headweight of 211g. Better ball speed but slower swing speed with att little more control was what I got out of it. I like to tinker with my clubs 😏

@swaydog1977 4 жыл бұрын

I wish my fairway finder went 300+ yards. A nice little pat ball there Pete.

@michaelmckee9784 4 жыл бұрын

Bought TS2 2 mths ago, shortened it by 1 1/2" , went fm 9 gram to 19 gram weight on it, and my accuracy improved alot, lost no distance. Hitting it at 11 deg

@gmuzz 4 жыл бұрын

Moving weight on a M6 driver? Isn't that called an M5 🤔. Love the idea of 3 wood shaft on a driver and amazed you got that distance.

@peterfinchgolf 4 жыл бұрын

graeme murray can’t move it there 😁 I was pretty surprised about the distance also

@grahamtomlin3272 4 жыл бұрын

I've never added weight to a driver but have added weight to a putter, this certainly helped me get a better feel but not sure it helped me hole more putts!

@mbatts3924 4 жыл бұрын

I struggle with my m2. I have to really exaggerate (in my mind) how I direct the club face at impact to stop drawing the ball too much. I’ll definitely try adding weight to the toe and see how it goes. Great video.👍

@peterfinchgolf 4 жыл бұрын

M Batts cheers bud let me know how you go

@acerunsuomi 4 жыл бұрын

My double F LBD club is my 4 iron i have lead tape under the grip at the end then also very low on back of iron . . .my go to club

@Crazyhorrse 3 жыл бұрын

Wow I did the exact same thing a few years ago with my Rocketballs stage 2 Tour edition driver. It still hits very well and I always hit it well but it's not as forgiving as my epic flash. I even did the lead tape, but I used a shorter shaft from one of my Rocketballs 2 rescue hybrids instead of my 3 wood. Most places I play are too short for me anyways and I don't like driver - wedge golf all the time. I usually have to put some lead on the toe of some woods. I struggle to keep spin down too. The club feels much better by re gripping with lead tape under the grip, and/or a lead cap on the end of the shaft under the grip too. I do that with any club I put lead on at the toe.

@fretless05 2 жыл бұрын

For a time, when I got back into golf, I thought it would be a great idea to go with a single length set of irons to keep my stance and swing consistent. I found I had a huge gap between my irons and hybrids, so I did cut down my hybrids and then added some weight to the heads to make them feel like a similar swing weight. It worked pretty well, and despite being longer still than the irons, I was crushing those clubs. When I abandoned the irons, I regretted it a bit. that said, all I've done in my current set was to shorten my hybrids a half inch for gapping and adjusted the lie angle using the hosel. I'd like to say I had success with my driver, but it an OB-finder, not a fairway finder, so it's been staying in the bag. I am thinking of buying some weights and playing with it.

@SamuraiFury 4 жыл бұрын

I still play my M3 and cut it down to 44.5”. Since I did that, my driver felt like a toothpick. So, my M3 has 4 sliding weights on the Y-Track now. 🤷🏽‍♂️ Definitely a fairway finder. 🙌🏽

@ruudschrijvers1874 4 жыл бұрын

Adding “three stripes” turned your TM driver into an “Adi”driver!

@frasersutherland394 4 жыл бұрын

The classic lead tape addition is what I did to my ping anser 2 on the bottom of the club to increase the weight as it felt far too light

@jdivadwillis Жыл бұрын

This is siiiick! 😅

@anderman1970 4 жыл бұрын

Definitely getting some strips sick of hitting a push with the driver, hopefully will aid in closing the face. Baby draw🙏🏻

@andrewkenningley4555 4 жыл бұрын

i have added 2 lead weights to my centre shafted putter , it gives it more stability in the wind , stops it being blown around, feels great .

@shaneromano9966 3 жыл бұрын

Added lead weights to my drivers for years and it 100% works. I think however your better buying such as the Taylormade versions that have weights in already as you can easily add more The R15 was great and the M1 for me I chopped 1 inch of shafts and added 30g in weights.

@michaelguthrie6985 4 жыл бұрын

Hi Pete I have a cobra f7 driver. On it you get 2 x 3g weights and 1x 10g. I normally have the 10g in the low lauch setting as I launch high and the 2 x 3grams in the high and draw ports. I had a massive slice down to not being the most flexible after years of playing rugby. So i purchases a extra 10 gram weight to put in the draw setting. Now having 2 x 10g weights on the club it seems to help straighten me up and keep the ball lower.

@ablazer1241 4 жыл бұрын

Great video I took my ping g400 lst and cranked it down to 8 degree, I got a aildila rouge silver 60 tipped it 1 1/4 , to be 43 inches total , added lead strips on bottom of head for a total weight of 212 grams so I could feel the head, best thing I ever did it's a bomber and down the middle. lost no distance, middle of the face ever time

@mrmagoo-lm8eq 4 жыл бұрын

Enjoyed the video. I design things as a hobby. One of the things I designed was a driver that makes it very hard to slice the ball, and also to top the ball, which I suppose would be great for the average club golfer. I haven't applied for a patent on it yet and haven't got the money to build one, and decided against contacting a manufacturer after going on their websites and reading that they don't want you to contact them unless you have a patent on the thing that you have designed, which is a shame as I think my club would bring a massive improvement for most golfers. I was thinking of doing one of those crowd funding things but I'm not sure how to go about it. After watching this video I may get hold of some carbon fiber and try to build one.

@sveinnorrisnland6653 4 жыл бұрын

Great video! Maybe it is time to dig out an old driver and tinker a bit. I have an M4 driver, x-stiff 73gram shaft, 9,5deg, cranked down to 7,5 and this summer I saw very clearly that I had to get the spin down, since I have a club head speed of approx 120-125 and the M4 just spins too much at that speed. So I added 10gr of lead tape to the lower leading edge of the driver and I have never driven the ball longer. (obviously I am also swinging better, but there was a very solid improvement exactly when I added the weight). So for a cheap golfer, lead weight can really work wonders. But I still think I will get me a Ping 410 LST this xmas.

@KevinDelaneyPGA 4 жыл бұрын

would you consider putting this driver into play if you found that you hit more fairways but sacrificed a bit of distance? i have always looked at Sergio's driver and thought that it looks short for him i wonder if he does something similar.

@garyhovey9305 4 жыл бұрын

Clever idea! I’ve tuned my driver from 9.5 to 8 and added weights to the sole to hopefully compensate for lost loft. Nice video! When will you challenge and beat RS on the course next? Those challenges are hilarious 😂

@peterfinchgolf 4 жыл бұрын

Gary Hovey we’ll get out there soon again

@SteveSmith-wv8ug 4 жыл бұрын

You hit it correctly when you said it wouldn't help someone with less than 90mph swing speed. I did use lead tape on drivers for a lot of years when I was in my 30's, even 40's, and it worked great.

@paulaskey1508 4 жыл бұрын

I officially invented the “Fiver” a high loft driver with five wood shaft, now that’s a fairway finder and longer par 3 weapon.

@winstonsmith11 4 жыл бұрын

Sounds very cool. What loft, exactly? 10, 11, 12... Beyond that, you're basically looking at a shorter 3 wood, right? Love the name 'Fiver', too. That's brilliant.

@paulaskey1508 4 жыл бұрын

it’s a callaway rogue 13.5 driver upped 2 degrees to 15.5. I also increased the rear head weight from 5gram to 14gram both to compensate for the swing weight in the shorter shaft but also to increase the MOI, I joke not, it’s really hard to miss the fairway !

@lukerobertson6013 4 жыл бұрын

Paul Askey that’s just a three wood degree with a 5 wood shaft

@johnairey4171 4 жыл бұрын

you are on the right track, but 14 grams is not enough. fourteen grams is about right for a 44.25" shaft. for a three wood shaft (43.5") you need ~20 grams. for a five wood (42.5") you need at least 26 grams. use a swingweight scale, you can buy one for $50 from golf works.

@paulaskey1508 4 жыл бұрын

Luke, You must have misread, I said it was a “driver head” with a five wood length shaft

@drmpblakeley 4 жыл бұрын

The stinger - best shot in golf!

@simoncook2251 4 жыл бұрын

Cut an inch off a regular shaft to bring it back to stiff and put a heavier weight in an M2 driver head to bring it up to D2 swingweight. Worked perfectly and feels great. Cost me all of $20 in total. Now a fairway finder.

@33md 4 жыл бұрын

I've always preferred a smaller heavier club as I've got a fast swing, also use tm m1 440cc. My apex hybrid is like going to the gym.

@derekdeshaw5762 4 жыл бұрын

Been having a bit of a hook miss! Going to give this a shot!

@davidforbes368 3 жыл бұрын

Great video,I am seventy seven and my distance has dropped slowly over thr years.I started to think what if I used a shorter lighter shaft,after trawling the internet I came across a tour edge driver x9 fitted with a ladies shaft,priced at eighty seven pounds,I thought why not.when it arrived it was brand new,after trying out a number of settings I settled on nine degrees,with really good results gaining twenty yards,next try some lead strips,many thanks Dave

@RoughGuitarMan 4 жыл бұрын

Nice test. I am not sure that the toe weights slow the closure rate, rather it moves the sweet spot so is giving a different gear effect from same strike point. You could easily test this by looking at the data from Foresight on Closure Rate.

@danielwinterbottom5531 4 жыл бұрын

I. Used to have a great big bertha 6 degrees it was one of my best drivers. My bad shot was a block however it went a long way especially compared to now

@tjmoore8493 4 жыл бұрын

I don't think I will ever go back to an off the shelf length for my Driver. Currently sit at 44.25", not quite your 3 wood shaft length. Also when using a shorter shaft it reduces the swing weight of the club so its best to add weight to the head to find your preferred swing weight. adding weight to the head will also effect the shafts feel and flex similar to soft stepping irons. Tipping the shaft may be needed to maintain the feel of the driver. Switching out the shaft to a 3 wood shaft as you did will allow the shaft to play true to flex. I love this topic and thank you for educating the masses

@petem9392 4 жыл бұрын

Hi. So for someone who pushes a lot of shots would I put the added weight on the heel as I go through phases of not squaring the club face enough?

@craigedga4r 4 жыл бұрын

🌟🌟🌟🌟🌟 Changed lofts and weights with F9 and Cobra weights plus 3g weights like you did ie more weight on on heel and toe with 10 degree loft low straight bullet

@happygolfer6335 4 жыл бұрын

i have my driver cut to 45 inches, i also have lead tape on the center and heel. my swing weight is D8. it is a long beast, not always straight, but its long enough to carry trouble most times.

@dickdick999 4 жыл бұрын

I modified my driver and took 2.5 inches off the shaft and it gives me much more control so I hit it better and dont lose a great deal of distance but it does find more fairways.

@jeffklosterman171 4 жыл бұрын

Built mine. 2017 M1(440) 8.5 with Mitsubishi Tensei CK 70 TX 3 wood shaft.

@therealjigsawjp 4 жыл бұрын

This is genius. I can just see your others watchers modifying their drivers now....😂🤣😂🤣.

@KurtisDavidBear Жыл бұрын

Thanks for your content. I'll add some lead tape to the heel to reduce left to right ball flight. Does that make sense?

@simonhague2674 4 жыл бұрын

I have a Titleist TMB 2 iron head, put a 3 iron length shaft in it and added two lead strips... now it's a stinger machine!

@robbusheay4258 2 жыл бұрын

Pete........I did this to my old Great Big Bertha 8*............put 9 grams on the toe.......added a 46" pro force gold x shaft.........and could beat nice small fades all day and added 20-30 yrds.....till I got old and lost my speed......damnit !!!!!

@georgealexander532 4 жыл бұрын

Great content Pete, but you said you usually strike out of the heel of the club, the gearing effect of the driver will make that ball go right, maybe you was catching the ones without the tape out of the toe

@stuartbaucom8706 4 жыл бұрын

What did you change the swing weight too with the addition of the tape? Took the club from a c9/ d0 to a d2/d3 just curious?

@AllTradesGeorge 5 ай бұрын

Late to the party on this one, but I'm hoping to add some lead tape on my 5 hybrid to correct a tendency to go right (everything else in my bag favors left, so that throws me off when it happens). Good to see it can so readily make a difference. Now, just waiting on the tape to be delivered...

@sirtogii5216 4 жыл бұрын

GAME IT!

@cpanepinto18 4 жыл бұрын

I started using drivers at 44" 2 seasons ago and it has made all the difference in the world. I typically carry about 295 so losing that 5-10 yards in the 2" isnt really a big deal. The fairways mean more to my score than a few yards.

@curtisrey9242 4 жыл бұрын

2:52 “carry distance pretty low”. Remember Pete, you’re mostly talking to mortals here. My dream is to roll out to your carry.

@saltypatriot1768 3 жыл бұрын

I no right

@seanconnors7639 4 жыл бұрын

Put my M5 fairway shaft in my M5 driver during the middle of last season. It was the best decision I have made in my golfing life. Immediately saw an massive improvement in dispersion with no noticeable loss in distance. I feel so confident now on the tee and have zero issues with the lighter swing weight.

@thatboytorres 4 жыл бұрын

How's that club now? I've put my driver head onto a 42" 5 wood shaft but haven't hit it yet. I reckon I'll be able to swing my hardest and still hit the middle

@thevisionaryelitist 4 жыл бұрын

Nice Pete. I’m always intrigued by your somewhat unorthodox first move away from the ball. Is this how you e always naturally taken the club away or adapted to fight the left side miss? I’ve got BIG issues rolling the lead arm with too much rotation and wayyy inside. Kills me!

@youthnys 4 жыл бұрын

Hey peter does the tape damage the club when removed?

@Adam_H_Official 4 жыл бұрын

I've got a 12 degree M6, and use a 8.5 degree Tour issue M2 head with a Graffaloy blue 3 wood shalf for bullet low ballers. Works well when the couse warrents it. Moving weight around though.......surely you'd have been better testing with the M5 lol

@Freeborough85 4 жыл бұрын

Great video as always Peter, but couldn't help but think about Trigger from Only Fools and Horses when your title says don't buy a new driver before watching this, yet you replaced the shaft of an existing driver. "i've had the same broom for 20 years. This old broom has had 17 new heads and 14 new handles." :)

@mattyice3525 4 жыл бұрын

I’m very interested in adding the strip weights to my driver to help me not drawl the driver is much how do you keep the strips from flying off your driver?