Custom Fishing Modification on a Seadoo Spark

Рет қаралды 26,627

2 жыл бұрын

I didn't realize how easy it would be to make a custom modification to allow me to fish on my jet ski all for under $100.
I hope this video helps you if you want to do the same thing on your own ski.
Please Like, Comment and Subscribe.
#seadoo #seadoospark #jetskifishing

Пікірлер: 73

@alanosborne1815 2 жыл бұрын

getting to the fishing spot faster than a bass boat, nice project

@aquila6096 Ай бұрын

very nice work.

@brandonhaystead9154 Жыл бұрын

Nice set up. I built something similar for my sparktrixx using the link brackets. Works very well and I added a fish finder as well

@triwaves757 Жыл бұрын

Thanks man. Glad you had some luck too!

@aldocruz6122 2 жыл бұрын

Well done sir , I love it !!

@Bill-jt7ts 27 күн бұрын

First wave well fly off lol

@jasonmekush5280 2 жыл бұрын

Nice work. I just made something similar for my fzs. If you find yours busts any of those straps or pulls the screws out, I drilled through the hull seam bond rail and fastened an aluminum plate to anchor tie downs to.

@jakemynameis93 2 жыл бұрын

That's awesome! I've always wanted to do that, I'd rip it around Lynnhaven Inlet. Lol

@triwaves757 2 жыл бұрын

Thanks man! Gets me to my fishing spots a little faster lol.

@arturozapata6675 2 жыл бұрын

Great job! The gloss finish on the pvc makes it look nice! like metal or brass!!

@triwaves757 2 жыл бұрын

Thanks! I really like the way it came out.

@marcuswhite3628 2 жыл бұрын

AND it won’t rust!

@CaptainMike1965 2 жыл бұрын

Cool mod. Guess I need to buy a jetski now.

@pj3717 2 жыл бұрын

Exactly what I need lol, now all you need is a fish finder/Navi !!

@triwaves757 2 жыл бұрын

For sure. I need too, I just haven’t gotten around to it!

@MrTulum85 2 жыл бұрын

Amazing dude!

@triwaves757 2 жыл бұрын

Thanks a lot!

@mariovanegas1147 3 ай бұрын

What size is your cooler? Where did you find your mat? Straps? Looks sick man!

@HoosierOutdoors Жыл бұрын

Love it! I might try something similar on my 3up.

@triwaves757 Жыл бұрын

Thanks buddy! Not a hard project and was great for fishing!

@JanserTattoo 2 жыл бұрын

Magnífico, vou copiar sua ideia! Congratulations

@markstoybox2058 Жыл бұрын

Nice setup😎

@triwaves757 Жыл бұрын

Thanks man!

@Tayuss79 2 жыл бұрын

So cool I’m doing it. Just need a Spark now

@triwaves757 2 жыл бұрын

Thanks man. Definitely a game changer.

@dustinshepard3166 2 жыл бұрын

Dude that’s sweet

@triwaves757 2 жыл бұрын

Thanks bro!

@joeblowjohnny2297 Жыл бұрын

I'm here cause I'm doing the same thing . I'm putting a 26hp briggs a decking on outriggers .

@williamgoring7605 2 жыл бұрын

Sea-Doos are great they're fantastic the fish pro unlimited or limited whatever it is is a beautiful machine the GTX 300 is badass I mean those things for fishing they have the room everything but setting up a spark for fishing it just doesn't look comfortable or fun I mean sure he's probably a blast out on the water kicking but for fishing man that's going to be hard to do I guess

@triwaves757 2 жыл бұрын

I agree. A spark is not ideal for fishing, but was a fun project to build and is useful if I don’t want to take a bigger boat out. Get to my spots a lot faster too!

@VladOnEarth Жыл бұрын

I was glad it didnt fall off in the end, looks very unreliable to me, at lrast not for the ocean. Once my trixx arrives I will 3d model and share something more rigid, but one will need a 3d printer to make that. Cheers!

@princeshovon2074 2 жыл бұрын

Thankssssssss

@user-wl4jy5fm9y 3 ай бұрын

Good men ❤🥰👍👍🇲🇦💪

@Road2Richess Жыл бұрын

Nice

@triwaves757 Жыл бұрын

Thanks!

@dustingardiner3301 Жыл бұрын

nice

@triwaves757 Жыл бұрын

Thank you!

@samt1059 2 жыл бұрын

Hey man nice build. Thinking about stealing this for my 2up haha. How’d you go about cutting the right angles on those support poles? Was it just test and adjust? Also do you think it’d support a heavier cooler? Thanks 🙏

@triwaves757 2 жыл бұрын

Thanks man. I can’t remember the exact angles. But I built the legs using the T brackets to allow me to adjust the angles to the degree of the ski deck. Definitely is sturdy and could support a heavier cooler! Good luck

@annabanna666 2 жыл бұрын

I am wondering how strong it is have u had rough sea full chilly how well did it work. Looks great

@triwaves757 2 жыл бұрын

Thanks. It has really held up quite strong and durable

@davidbock9107 2 ай бұрын

nice build. I am starting my build for my Kawasaki and your video was very helpful. question. where did you find the adhesive mat for under neath?

@triwaves757 2 ай бұрын

Thanks buddy 🤙. You can find the decking anywhere on Amazon

@JohnBraman413 2 жыл бұрын

could add some side plates to mount rotopax gas tanks.

@triwaves757 2 жыл бұрын

Great idea. Maybe keep that in mind if I go off shore lol!

@JorgeSanchez-ek8zu Жыл бұрын

I can drill my jet ski to put the rings to hold the cooler.

@codymatthewson6506 26 күн бұрын

Love this. Did you use pvc for your rod holders as well?

@triwaves757 10 сағат бұрын

Thanks buddy. I used PVC for the housing and actual rod holders on the back.

@taylorreyes-vera3426 2 ай бұрын

How did it hold up having anchor points being drilled into the deck? Would love to do this but a bit hesitant to drill into the deck. Great build tho!

@triwaves757 2 ай бұрын

Was no problem at all a year later

@cowboysnation1594 9 ай бұрын

How do you like the balance in the water? Is it to light that it moves a lot and it’s easier to fall in?

@triwaves757 9 ай бұрын

The balance is fine especially for it being a spark. I would definitely stay inshore fishing with it though

@vpsaviation732 Ай бұрын

Where did you get that padding for the cooler top and back what's it called? Thanks!

@triwaves757 10 сағат бұрын

You can find any so many different options on Amazon called "Deck Matting"

@danieltran9011 Жыл бұрын

I’m very interested in getting me a JetSki for fishing too. How well as performance and how stable is win open waters?

@Duramaxmanny Жыл бұрын

Very well

@JohnAvantiBK Жыл бұрын

How much did it cost, and did you add ss screws?

@triwaves757 Жыл бұрын

Cost around $50 and used stainless screws with all the water on it!

@minwoopak4258 Жыл бұрын

Is this jetski the cheapest model from seadoo? I look forward to buying this kind of the jetski for fishing

@triwaves757 Жыл бұрын

Sparks are the base models for Seadoo. They are great entry level skis regarding cost, but I would not buy one specifically for just fishing!

@minwoopak4258 Жыл бұрын

@@triwaves757 I am thinking of buying a jetski mainly for fishing. What model would you recommend me to buy for me or would you prefer to buy?

@nsvaluto48328 4 ай бұрын

Yours didn't have the Lin q system like on most modern ones?

@triwaves757 4 ай бұрын

No the 2015 models didn’t have it

@nsvaluto48328 4 ай бұрын

@triwaves757 oh so models sometime after 2015 I guess?

@triwaves757 4 ай бұрын

@@nsvaluto48328 yea. Seadoo launched it into their fleet in 2018

@jetguyfly1 2 жыл бұрын

How hard is it to climb back on if u fall off?

@triwaves757 2 жыл бұрын

Haven’t tried with it on. Probably couldn’t to be honest. I normally only keep the kit on if I’m fishing!

@vanessagarcia441 2 жыл бұрын

Are you able to provide the measurements ?

@triwaves757 2 жыл бұрын

26L X 16W X 12H. Let’s see 7 inches tall

@greg-q8d 3 күн бұрын

how much does it cost to build one

@triwaves757 10 сағат бұрын

About $60!

@blueschild61 8 ай бұрын

Safety glasses, bro. Take care of your eyes.

@triwaves757 7 ай бұрын

Thanks for looking out 🤙