CUSTOM REAR DECK DONE [ Infiniti G37 ]

Рет қаралды 787

Күн бұрын

Hi all!!! I don't know if I'm happy with the Custom Car Rear Deck Installation! Should I change the design or is it cool enough? I need your help guys! Please comment down below.
The goal is to be able to exhibit at SEMA Show 2023. But first we have to qualify for The Bilsport Performance And Custom Motor Show 2023.
-----------------------FOLLOW ME--------------------------
IG: / magassdesign
TIKTOK: / magassdesign
Hardline material:
www.streettrends.se/product-c...
Thors Sadelmakeri:
thorsbilsadelmakeri.se/
New Car Audio System Installation - Infiniti G37.
New awesome sound components from dBAkuten.se and Cerwin-Vega.
Discount code: ''MAGASSDESIGN'' for 10% off.
dbakuten.se
Sound Components:
Cerwin-Vega Stroker PRO 1"
dbakuten.se/varumarken/cerwin...
Cerwin-Vega Stroker PRO 6,5"
dbakuten.se/varumarken/cerwin...
Music from Epidemic sound:
www.epidemicsound.com
Inspiration from Tj Hunt, Car Audio Fabrications and Throtl
My Filming Gear:
DJI Osmo Action - 4K Action Cam
www.amazon.com/DJI-Digital-Di...

Пікірлер: 34

@Trap..house. Жыл бұрын

Looks good maybe put a mirror inside of it with some lights to give it a infinity mirror effect

@MagassDesign Жыл бұрын

Thanks man.. coming up in the next video 😁🥰

@Donny_Bo_Danglez Жыл бұрын

Looks good to me! Once you put some fabric in there I’m sure it’ll clean up nicely 👌🏼

@MagassDesign Жыл бұрын

Thanks bro! I do really hope so. Really appreciate it!

@m0neq Жыл бұрын

Marry Christmas and happy new year to you too! I think black fabric in the box will do a good job of hiding the hole and the sharp edges

@MagassDesign Жыл бұрын

Huge thanks bro❤ I think and hope it will hide it well.

@eprohoda Жыл бұрын

Hw is it going?. so excellent vlog.see u around! 🤘

@MagassDesign Жыл бұрын

All good here. Hope the some to you! Thanks for watching!

@erickcontreras9322 Жыл бұрын

I think you should polish some aluminum or add mirrors inside to reflect the aluminum lines and hide the empty box more

@MagassDesign Жыл бұрын

Thanks Erick for the feedback and I have some mods coming up in the next video. Huge thanks for taking the time to write and thanks for watching 😍

@erickcontreras9322 Жыл бұрын

Been waiting for your build to be done 😩

@MagassDesign Жыл бұрын

@@erickcontreras9322 It has to be done in April next year. First show off in 2023.

@brixvibe Жыл бұрын

one other idea, would be to chop the top of the box so that it's not so deep. That will lessen the corner visibility. That would then pose an issue with how it's mounted at the bottom, but I imagine some sort of sturdy spacer or 'box below the box' platform for it to still mount properly below the more shallow box. just ideas. more parts means more opportunity for failure of course. looking forward to seeing this beauty get buttoned up for the show. great work so far man!

@MagassDesign Жыл бұрын

Thanks bro! You have a lot of good thoughts. I really appreciate you taking your time to write and all feedback! 🥰

@brixvibe Жыл бұрын

@@MagassDesign looking at again, I guess the box HAS to be that deep because of the airlift module's height. looking good in the new video with the LED

@MagassDesign Жыл бұрын

@@brixvibe That was the biggest challenge, to fit the height of the Manifold. I even had to mill away material on the underside of the beuty panel to make it fit. 🤣

@jelle8754 Жыл бұрын

You could just make a slot, the width of the cable, from the top of the box to around the middle so you don't have to make a hole big enough for the connector. I hope you understand what i mean :)

@MagassDesign Жыл бұрын

I do understand and I have already welded away the big hole and made a slot from the top side. But I like how we think ha ha. Thanks bro for even taking the time to write. Really appreciate it!

@jelle8754 Жыл бұрын

@@MagassDesign great minds think alike! No problem bro, keep up the great work!

@MagassDesign Жыл бұрын

@@jelle8754 I will and thanks for the support🥳💯

@brixvibe Жыл бұрын

the best option is to probably redo the beauty panel so that it only shows what you want. no sense in going this far in a build and having to compromise on a fixable thing. obviously your call. you'll still wow people with the custom rear deck regardless. If you don't want to redo it, maybe just put some foam in the corner making the angle 45 degrees,, following the contour of the hardline, or soften it up in other with foam. maybe do something similar that follows the hardline contours on the bottom side as well... then cover with fabric. That's probably what I'd do, so that I wouldn't have to redo the beauty panel. At least foam is cheap and pliable, so you can try out a lot of different looks easily

@MagassDesign Жыл бұрын

Thats a really good idea! Thanks man! I will take that with me.

@dallehn1337 Жыл бұрын

God jul och gott nytt på dig! Angående hatthyllan, vad ska den kläs i? kanske kan klä med samma ner i aluminiumlådan också? Läder med diamantmönster hade nog varit fett annars!

@MagassDesign Жыл бұрын

God fortsättning mannen! Ja jag kan inte avslöja vilket tyg det blir riktigt än. Men det kommer nog att ordna sig med allt tyg och lite andra idéer som jag har ha ha. Tack snälla att för att du tog dig tiden att skriver och att du tittar😍

@dallehn1337 Жыл бұрын

Kommer bli kungligt oavsett, du gör ju aldrig något halvdant! Alternativt kan man ju Lacka alu-n typ mattsvart så blir inte linjerna så tydliga 😃

@MagassDesign Жыл бұрын

@@dallehn1337 Tack snälla man.. Ja jag försöker mitt bästa. Den idén skall sparas 😁