The trunk came out spectacular. I can't wait to try out the fish-eye filling method you mentioned when I recoat my carbon splitter! Btw, what grit sandpaper would get rid of epoxy high spots especially after 2k clear?
@MagassDesignКүн бұрын
Huge thanks man! really appreciate it! Ooo If I understand the quastion the right way I would say that you schould not put any clear on the epoxy before its flat enough. If you put clear on and then begin to sand trough the different layers it can be a shift of colors between the epoxy and the clear. Try to build up enough with epoxy until you think it's flat and then start with the clear. I usually sand the epoxy with 240p and finish of with a 500p before I go over to clear.
@CrazyCat2292 күн бұрын
Wish I could ship my FD to you to paint. Damn, you are good!
@MagassDesign2 күн бұрын
@@CrazyCat229 Wow man! Huge thank's for the kind words 😘
@Mik359592 күн бұрын
Wish i knew someone as talkative as you near me
@MagassDesign2 күн бұрын
@@Mik35959 Would be a dream to live in the US.
@Dr-Asim2 күн бұрын
How much would you charge for a job like this? Cheers from your neighbor, Oslo Norway. 🙂
@MagassDesign2 күн бұрын
@@Dr-Asim Around 20 000 SEK
@Dr-Asim2 күн бұрын
@@MagassDesign Wow. That is way to cheap. How many hours did you spend in total? 150 - 200? Probably even more. Just saw the the second part just dropped. Will watch it later. Thanks for the content brother. Like it a lot.
@MagassDesign2 күн бұрын
@@Dr-Asim I know it's way to cheap. But if I would take more I have no customers.. But I also have to be better on saying no if the customer dosent want to pay Thanks for watching and especially taken the time ro write. I really hope you are going to like the second part.
@monkeymk794282 күн бұрын
Where did you get the materials?
@MagassDesign2 күн бұрын
@@monkeymk79428 You have all in the description below.
@borasarnaa2 күн бұрын
❤🔥❤🔥❤🔥
@MagassDesign2 күн бұрын
@@borasarnaa 😘😘😘
@abbasonyt27853 күн бұрын
Hey Magass, if I wanted to do just the q60 headlights conversion on the g37 while still keeping the IPL bumper would it be much easier espeically the fender work? There is probably a small chance you will see this haha but Please let me know I love your content!!! Love from canada 🇨🇦
@MagassDesign2 күн бұрын
@@abbasonyt2785 I'm sorry to give you bad news, but it's impossible ro have the new headlights with out doing anything to the fenders..
@abbasonyt27852 күн бұрын
@@MagassDesign yes cutting and welding the fender is no problem for me, i’m just wondering if it would be much easier to do the work compared to what you did if im still keeping the ipl bumper and cutting and remodelling it with fiberglass to fit the new headlights hmmm 🤔
@MagassDesign2 күн бұрын
@@abbasonyt2785 Aaaa now i understand... mmm the problem is the outlines and the mountingpoints you have in the bumper to the headlights. But i usually say nothing is impossible..😅
@CrazyCat2294 күн бұрын
They should have just had u do the molding and wrap it in carbon fiber looking wrap. I know you have to do what the customer wants but I personally hate this "trend" in lets make it look like carbon fiber parts....
@MagassDesign3 күн бұрын
I hear you bro.. 100%
@ahw5hcgfyj8 күн бұрын
would love one of these on my e90
@MagassDesign8 күн бұрын
It came out really good. Do it =)
@juangouveia8098Сағат бұрын
read my mind....
@juangouveia8098Сағат бұрын
@@MagassDesign how does this hold up over time? wont it crack in the transitions? ideally for me, i would just get it painted after its been molded in? so no, carbon fibre overlay over the whole thing.
@MagassDesignСағат бұрын
@@juangouveia8098 You could do boath. My customer wanted to have carbon fiber overlay, but you could just paint it. I have done this over 30 ish times and had a good result over time, but what I learnt over the years is that it can sink but I have not seen it krack with the method I use.
@alex_2888 күн бұрын
I’d love for u to do this for my car
@MagassDesign8 күн бұрын
I guess your not from Sweden ha ha?
@N3onDr1v38 күн бұрын
I've use fiberglass a few times before but i feel like I'm missing something; the bootlid is metal and the wing is CF, then smoothed out. Then i would have taken a mold to them make the CF bootlid as a single piece of only CF. So not making the mold and then filling that with the CF, is this not just making the boot heavier? For not much structural gain?
@PennerFab8 күн бұрын
I had the same thoughts. I assume this whole process is mainly just for aesthetic purposes.
@MagassDesign8 күн бұрын
Hello and thank you for watching. You are absolutely right, my friend, you should actually do that. But my client didn't want to spend the money on me casting it. The customer's goal was mostly appearance in this case. This is a good example if you want to try this at home and perhaps don't have all the knowledge to cast/mold off and glue on afterwards. Hope you have a great day.
@N3onDr1v38 күн бұрын
@@MagassDesign ohhh right, that makes a bit more sense now. Thank you. I cant wait to see how it will come out!
@MagassDesign8 күн бұрын
@@N3onDr1v3 It came out better then I thought .Just wait and see on the next vid on sunday and i hope you will agree.
@notyouraveragegoldenpotato6 күн бұрын
You're correct. Spend money- less performance. But you can hard park in the car meet better😂
@martinfreeman62279 күн бұрын
Great content as always, cant wait for part 2..
@MagassDesign9 күн бұрын
Yhank you so much!!! Just wait and see. Came out awsome.
@borasarnaa9 күн бұрын
👌🏻🔥❤️
@MagassDesign9 күн бұрын
🥰😍😘
@abbasonyt27859 күн бұрын
Love the content Magass! Keep going it will be worth it!! Love from Canada !! 🫡
@MagassDesign9 күн бұрын
Oooooo huge thanks there mate! Cool to know where my followers come from. Wow!
@NiklasMattsson-h2x9 күн бұрын
kommer bli super :) såg dock att din ionstar inte mår så bra. antingen är den redan sönder eller så har du bara för högt tryck vilket leder till att den går sönder ( har själv dödat en sådan ) lampan baktill skall lysa grönt inte rött. den tål max 2 bar , har man högre tryck så spränger man inpellern efter ett tag :) sätt en klocka på den ;)
@MagassDesign9 күн бұрын
Tjena Nicklas och tack snälla för informationen. Ja den är lite svår att hålla i rätt mellanläge för att ha den på rätt tryck. Nu är det bara att ta tag i att sätta en klocka på den. Tack för att du tittade!
@upclass717918 күн бұрын
Mannnn, that looks AWESOME!!! And YES, I would like to see how you installed magnets and build.
@MagassDesign16 күн бұрын
Huge thanks man!!! I will try to make a video on a new project that I have soon.
@upclass717916 күн бұрын
@@MagassDesign Great!!!
@Mik3595925 күн бұрын
How dod you get the door cards to work?
@MagassDesign22 күн бұрын
Hi there Mike. What do you mean with the door cards? Do you mean the Tesla door handles or the dorr cards of the inside of the door?
@nicolasnanita965028 күн бұрын
I don’t know if you will respond but what is the exact size of the wheels and the size of the tires I’m looking forward to running this setup on my g37
@MagassDesign22 күн бұрын
The wheels are Weds Kranze Vishunu Front: 19x10.5 Rear: 19x11.5 Nexen Nfera Su1 Front: 225/35 Rear: 265/35
@vq.r3llАй бұрын
G60 looks fireeeeee
@MagassDesignАй бұрын
Huge thank's man!!!
@morganneal7848Ай бұрын
Could you possibly make the panels to do this? I would be interested in some
@MagassDesignАй бұрын
Oooo, I made these by hand and if I'm going to make more, I'll have to get a tool. This would mean a slightly larger investment.
@robertnorris6079Ай бұрын
Hey what led strips ,Controller do you use is tha controller bluetooth app any information will be appreciated thanks
@MagassDesignАй бұрын
Hi there. i think that the company that I bought it from dosen't exist anymore. Sorry! But I think if you are going to controll everything at the same time with one App you can easy connect all toghether trough most of the apps that come with todays led kits.
@devastatoraudioАй бұрын
Subbed as well
@MagassDesignАй бұрын
❤💥💯
@devastatoraudioАй бұрын
Real nice work!
@MagassDesignАй бұрын
Thank you so much man!
@ronniepearson9733Ай бұрын
Please I want to do it to my 1957 truck.
@MagassDesignАй бұрын
🥰
@nizamkhooАй бұрын
i loved you video bro is hard to believed you can done such a creative idea for the monified the steering if i on your side probally cant make it haha😂 well done bro
@MagassDesignАй бұрын
Huge thanks for the kind words bro!!!
@nizamkhooАй бұрын
@@MagassDesignyour welcome bro i also planning for My G37s but i still on reseacrh
@MagassDesignАй бұрын
@@nizamkhoo I hope you have more luck then me 🤣
@nizamkhooАй бұрын
@@MagassDesign hahah yeah bro wish me luck 🤣🤣
@MagassDesignАй бұрын
@@nizamkhoo 🤞🤞🤞
@ronniepearson9733Ай бұрын
You didn't show how you put them in? Also how did you hookup the electric handles to the locking mechanism? Can you make a video of all of that. I want to put them in my 1957 chevy truck but don't know how to deal with the door locking mechanism. It looks great though.
@MagassDesignАй бұрын
Maby I have to do a video about this.. There's been some quastions on how I did it...
@whathappend3885Ай бұрын
Holy shit tio your a master of your craft to say the least hope this channel cops some exponential growth soon
@MagassDesignАй бұрын
Wow man! Really appreciate you saying that! Huge thank bro!
@user-is4ey5xy4x2 ай бұрын
Can you show how you hooked up the screen properly. What wire harnesses go where. I cant get my audio to work on it
@MagassDesign2 ай бұрын
Hello. I just followed the instructions in the manual. I know it was really hard to understand but made it work. But I may try to make a shorter video if I need to take the screen off someday.
@SteveBernhardt-pe1ne2 ай бұрын
Erstklassige Arbeit, super toll gebaut und lackiert
@MagassDesign2 ай бұрын
Mega dank man! ❤️❤️❤️
@japoncae72112 ай бұрын
g37 with GTR R35 frontend would be way better maybe ?
@MagassDesign2 ай бұрын
Could be cool...
@guttagutta19812 ай бұрын
What speakers you put in for the front door subs... the trunk is sick❤
@MagassDesign2 ай бұрын
Hi there and a huge thanks.. I really love how the install came out. You have a video where i go though all the sound components here: kzfaq.info/get/bejne/aJhllbB3us28cZs.htmlsi=B27PomrAnx00XElI But in the front I have 2 Cerwin Vega Stroker 6,5 and 1 Cerwin Vega stroker Pro 1 in each door.
@Hedlund833 ай бұрын
Underbar video :) kul att du är tillbaka på tuben
@MagassDesign3 ай бұрын
Tack snälla och uppskattas verkligen att höra :)
@borasarnaa3 ай бұрын
As always when you do your thing 👌💯❤
@MagassDesign3 ай бұрын
Thanks for the love guys ❤️
@deanboucher20673 ай бұрын
Brilliant set up n nice n tidy job 😊
@MagassDesign3 ай бұрын
Huge thank's man!
@aaronmartinez69643 ай бұрын
Where did you get the interior from I was looking to switching out my entire interior in my g37
@MagassDesign3 ай бұрын
Hi there.. Thats the OEM interior that I have modified and re-done...
@aaronmartinez69643 ай бұрын
@@MagassDesignno shot it came out amazing you did a fantastic job
@MagassDesign3 ай бұрын
😍😍😍@@aaronmartinez6964
@romeol79254 ай бұрын
Nice but with it was A MT.
@MagassDesign4 ай бұрын
A MT?
@rayvettevlogs4 ай бұрын
Get exhaust would be awesome
@Malines015_4 ай бұрын
How much would you ask to do this front build on my 6n?
@MagassDesign4 ай бұрын
Mmmmm I don't know, it depends. Were are you located? Mine is actually for sale 😍
@dannyiceman20404 ай бұрын
Looks crazy cool. Great fabrication.
@MagassDesign4 ай бұрын
Huge thank's bud!!! Really glad you liked it =)
@trinityboards86154 ай бұрын
You need more recognition for the amazing work you do. Absolutely stunning bud
@MagassDesign4 ай бұрын
Huge thank's for saying that! Really appreciate you taking the time to write! 😍🥰🥰
@alton8894 ай бұрын
The tools an step by step
@MagassDesign4 ай бұрын
It's been a lot of quastions on that. Will do a better video soon.
@alton8894 ай бұрын
@@MagassDesign ok
@brandonbates91635 ай бұрын
Tristan Tate?
@MagassDesign5 ай бұрын
Really think so???
@plus-ub7ky5 ай бұрын
2 years later do you still have this intake laying around lol
@MagassDesign5 ай бұрын
Hi there. Unfortunately I just have the top side laying, the lower manifold i did cut up to make the GTR adaptation manifold.
@mksmwet15 ай бұрын
Bro the trunk looks awsome. But the speaker and rca cabling ran with power cables isn't a issue if using good rcas and cabling.. 90% of the time noise comes from crappy grounds. If you test for good grounds it's very unlikely to get alt noise
@MagassDesign5 ай бұрын
Thanks man! Really appreciate you taking the time to write. You are totally right. Thank's for the advise and luckily I don't have any noise 👌🥳
@powercordz5 ай бұрын
Would love a deep dive into how you did the Tesla doors
@MagassDesign5 ай бұрын
Maby I have to do a video about this.. There's been some quastions on how I did it...
@Tintin_ZK5 ай бұрын
love that you got my bB in a little corner😄 and I have to take a closer look at your build it looks really lovely!
@MagassDesign5 ай бұрын
I really love your bB! The whole Japday experience was magical!
@Tintin_ZK5 ай бұрын
@@MagassDesign thanks! I totally agree with you!😁
@gecesovalyesi5 ай бұрын
Mükemmel. Cok guzel cok begendim
@MagassDesign5 ай бұрын
Teşekkür ederim
@oswaldferreira5 ай бұрын
Greetings from Brazil - Rio de Janeiro. I was looking for a video with a built-in door handle to have a workshop put on my 1998 Mitsubishi Galant 2.5 VR and I found your content incredible, one question I have is; Is it possible to put this Tesla door handle on a Mitsubishi Galant, just importing the door handle from AliExpress? I used Google translator 😅
@MagassDesign5 ай бұрын
Hi there and really cool to hear about your project! I hade to make the steel fixing plate to be able to make mounting point on the backside for the handles and of coure to be able to weld in the plate to my doors.. It was a big job to get everything working but well worth it!
@oswaldferreira5 ай бұрын
Would you have a video of how the door was assembled internally, how the steel cable was connected to the hinge or if any other parts were needed besides the hinge to open it?
@MagassDesign5 ай бұрын
@@oswaldferreira Maby I have to do a video about this.. There's been some quastions on how I did it...
@oswaldferreira5 ай бұрын
Yes, my fear is buying only the external handles (knob) and not being able to do it because I didn't buy an internal set
@MagassDesign5 ай бұрын
@@oswaldferreira One thing with the tesla door handles is that they are powered with only CAN-signals. So I had to make my own mekanism.
@missionofafuturebillionair28545 ай бұрын
I want to see the detail build and the overall car. Oh and I just subscribed
@MagassDesign5 ай бұрын
I'll try to mike a more in dept video soon and welcome to the channel!!!
@Obijus5 ай бұрын
Congratulations as well brother well deserved
@MagassDesign5 ай бұрын
Thank's bro. Hard work really pay's off. Really appreciate you taking the time to write!