So far, out-of all the youtubers I watch, you have the most patience. Incredible amount of focus. And your work s so clean man. The whole truck, inside and out, is in my book the best, most beautiful, clean build I hav ever seen.

Man that’s some great workmanship there. Looks really clean when do I drop my old 86 4Runner off for you next series 😊

Amazingly comprehensive and great demonstration after installation. Thank you!

dude the cutoff on these is insane... incredible work!

Nice, clean, missing my 03 4 runner and that 4.0, 267,000 miles, but it struggled to pull my 17’ enclosed trailer, Oil looked fresh at 5,000 mile oil changes. One tough vehicle, also had 4 tacomas, 2.7, 3.0. 2- 4.0s. Never a problem.Now a 2019, 6.2 F 250, time will tell.

Wow!! The truck is amazing!! I thought upgrading my headlamps to LED was awesome, then you come through with this and just, wow!!!

Headlights really look great! Whole front grill looks really good! Nice job !

This dude always has the coolest beats in his videos

Not everyone like style of headlights, but love your build, nice work mate. Hope to see more.

You did a good job! That look great

Hey love the video I’m doing my own currently! Where did you find those rubber caps for the back of your headlights??

Beautiful truck and very very nice work. Can’t find the headlights in the US.

Woah! It all came together great and it works perfectly. Your field of vision is way clear..

I wish the projector install on my Ford was that easy, I had to chop the hell out of the backs of the housings to get them to fit. The side markers and halos with flash differently since they have different driver circuits built into them. I have the same issue and there isn't anything you can do about it, unless you could get both lights from the same brand, and even then there is no guarantee.

Great job on those headlights ! You must have spent many hours researching the right parts to make everything fit together as well as they do, cudo's to you. They look awesome and produce more light than I expected !!! I also like the amber turn indicator portion of the headlight, that's cool.

Since the toyota build cant go on forever next build i would love to see a decent horsepower alh build the truck makes good power but maby even more i know you could fab up some piping for a custom compound setup😏 then put it in a light car like a golf

You should add a small amount of tint to the headlight housings. It'd make it look really nice and the lights are bright enough it won't really affect driving at all. Not like black but just a "smoked" headlight look

Great craftsmanship as always, hope you do more projects after this truck is complete!

Now to take the grille back off and black out the intercooler. The projectors aren't really my style, but man they sure are bright. Good job on the install, and the detailed install video.

Just the video I needed!!! I have a 94 4runner. And I was looking to do the retrofit but couldn’t find any videos!! Thanks man!! Truck looks and sounds beautiful!!🤙🏽🤙🏽

well, now I'm going to need to do that to my 95 4runner. They look amazing man, nice work

Very very sharp... the headlights and grill all together just really looks great. All around just a sharp looking truck. I really like the bed you built. I can see adding little things to it already lol. But it is just a great looking truck and you haven't even put the other tires and wheels back on it lol...that will just be another wow factor... I really enjoy the fact, and it shows that you are meticulous in your work. Those little extra steps are what sets a good job apart to become a great job.

dont like matching paint but Awesome job keep it up

Great work! Crispy clean and fresh💪🏼 I rebuilt a 94 pick up about 12 years ago. Love what you’ve done 😎

10:40 the first few hid retrofits I've done had some sag after a while, even after fixing the nut behind, what worked was fixing a small piece of plexi underneath the projector to fix the position vertically before tightening the rear nut. Hope these don't sag over time otherwise you will run out of adjustment with the adjuster bolts

This is soo clean! I own a 94 2gen 4runner as my daily driver and i believe this would fit. Could you build a pair for me and I buy it from you?

Very nice work. I am sure that took a lot of research. What about swapping out the incandescent dash bulbs?

Hello Austing, great video man, do you recommend install 12$ halo ring on retrofit process?

I really like the truck. I agree with you that the black engine bay is nice!

Love it. Actually I loved it so much I'm going to copy that exact retro fit for my 2000 dodge ram van 1500. Hope you can share links for those parts (all except the housings cuz I dont own a toyota pickup). Great builds man! I love both pickups so far. Maybe I do also something like your flat bed for my 2001 nissan pickup too. And some plate bumpers also. I'll share updates as I progress on those builds.

Sick mod! I’m planning on putting an ln106 dual cab onto an lc76 chassis with a bed similar to yours. Gonna be following your build!

I didn’t know they made the non flutted lens headlights. I’ll definitely look those up when I do the 4Runner conversion to my ‘94 ext. cab.

So damn clean! Great work! 👍

Dope! We’re all still wishing it was a 4bt.

Mis respetos a este trabajo tan bueno y limpio en todo el carro

How did you get dual function side markers/blinkers?

See now thats class 👏. So much better then that goofy VW EMBLEM. that really makes it more custom

i'm getting the parts today(placing the order) then I'll copy your job, thank you so much for sharing.

Sic!!! Looks awesome!! Great job

必ず人手間加えるところが流石です‼️🙇 参考になります‼️🍻 またの動画楽しみにしております‼️🙇

I randomly just saw this truck on TikTok. Look Good!

Truck looks great! You do great work bro.

On the shrouds did you paint them or did you buy them black?

There are those who can hole saw something while holding it by hand and those that are mortals.

Que bonita camioneta buen trabajo

Turned out great. 👍🏼

Got a questions.. I have red,white and black wires. Do I hook up the red to my turn signal or to my emergency lights? White hook up to my head lights and the black is ground? Please help first time. Thank you. 96 toyota 4runner

Austin, you should graft a Taco hood scoop onto yours. 😉

In the past I've used oven cleaner to pull the chrome coating off plastic before painting or dyeing

👍👍Very nice, great job! Greetings from Germany !! Top truck!

What a cool build. Awesome job!

Austin, you got any measurements for a 80 series land cruiser bumper?

Quedo muy genial la Toyota felicitaciones 👍

How can I find modern headlights led/projector for 95 T100

Would a 92 4runner headlight fit on a 97 hilux?

How do u mix your paints. The red looks good

They are phenomenal and I don’t know about you but you could make some serious money just putting halos in peoples lights like that and I wish they where a solid red to cause it would look aggressive but that’s my opinion and your truck but all in all you put a lot of time and deserve to do whatever you want it’s perfect

Top shelf install

Hook the white halo to your fog lamps

Very nice work

Now to get it nice and dirty😂😂looks awesome mate

Looks so dang good !!!!!! What i woulda reccomended was hooking the halo to your parking lights so they are on without the headlights

These look great getting some for my Hilux surf

Congratulations my broo. Nice 😎😎👊👍💪 God bless you and you family take care. Greetings From Panamá

Nice work. Looks very good 👌👍

love watching your videos all the way from Samoa

They look awesome

How can I get headlights with the transparent liza headlight lens, since my truck has them shaped in the lens and the lens does not show the cut :(

Have you thought about making some lights to sell?

Looks badass

Хорошо получилось👍

Another great job Betty Crocker.

Good job man

Good vid!!... thanks!..

Those lights are so sick! Do you know of anything like that for the mkIV jettas? I want to do projector but not spend a fortune to do it

Хорошая работа!

The only thing I don't like about the truck is that flat bed a regular bed would look so much better

Where did you tap the 2 wire from the projector to, to activate when high beam is turn on?

Mate these look slick !!!!

Where did you get the wiring harness for the halos to make the turn signals and day time running lights work? Or does it come with the halos?

@Austin Niemela congratulations on the wonderful job you have done to the pickup. 2? Where did you get the front bumper. Can you do a set of front lights for me

What size are the caps for the back of the headlights? Thanks in advance

Nice job Sir.

So clean man 🤙🇬🇺

Amazing truck.🤙

Are the wires okay to go in the oven as well?

Vilen dank fur gut video!

does the front grill and headlights fit perfect on the hilux? i want to do it on my 91 hilux too, but i would like to know if there is something that doesn't fit

hey dude! the headlights are beautiful! where are you going to stop!

My lovely truck

With this upgrade, do the lights dip to the correct side on low beam, as per the factory spec lights?

30 years old looking brand new

Great job buddy, Nice hat btw where can I get one .

Very sharp Tacoma

What ring size did you buy for the halos?

they look beautiful !!!

en español se dice que perronas te quedaron

2 1/2 or 3 inch?

4runner front end looks so much better

Would this work on a 95 4Runner?