Custom Router bit made from scratch on VMC / Mill
Рет қаралды 115
Жыл бұрынDidn't have time for proper editing but though some of you might get a kick out of seeing something like this. Today I am turning using the mill spindle and then milling the relief for a simple router bit. The bit in question will not need to remove much material rather just finish a profile in UHMW. So we can get away with a solid tool, fudged relief and a 0-6 rake angle.
@enriquenaranjo3412 10 ай бұрын
Buen día que programa usas para maquinado? y que estrategia es ? Buenos vídeos
@calphis 10 ай бұрын
Machine is controlled with LinuxCNC. I used Fusion 360 lathe toolpaths on this machine. Standard turning and profiling strategies. Then back to 3 axis mill strategy to cut flutes or relief.
@bobweiram6321 Жыл бұрын
What does the cut profile of the bit look like?
@calphis Жыл бұрын
in the last video sequence its cuttingn the piece of plastic in question. It's basically a zig-zag with 0.5" stepovers and a 0.125" radius fillet at each step.
@calphis Жыл бұрын
nothing that you couldnt do with separate bits, but the goal was to make a single bit to simplify this to a single setup and step.
The Wizard of Overall Creek
Рет қаралды 548
Inventor K
Рет қаралды 44 М.
Rookie Carpenter Demands $3k Monthly Salary, Stuns Boss with Masterful Creation from Cracked Wood!💰✨
WoodFerra
Рет қаралды 2 М.
Machining_Section
Рет қаралды 1,2 М.
MaxxPC
Рет қаралды 1,4 МЛН
Skillbox Программирование
Рет қаралды 962 М.
Buy Smart┃Магазин ноутбуков
Рет қаралды 1,3 МЛН
i-shoppers обзоры
Рет қаралды 1,7 МЛН