Custom Snowflake Ornaments with 3D Printing + Lasercutting

Рет қаралды 18,226

2 жыл бұрын

I came up with this simple holiday project as a way to mix and match 3D printing and lasercutting. If you only have one or the other, you can make it work!
Snowflake Ornament STL + Other Files : bit.ly/babyflakes
Lithophane Generator : 3dp.rocks/lithophane/
Shopping List:
• Astrolabicon Atom Edition Series 1 Puzzles : bit.ly/atom_1
- 'non-limited' version : bit.ly/astro_atom
• MakeBlock Laserbox Pro Lasercutter : bit.ly/Laserbox
• Snapmaker 2.0 3-in-1 3D Printer : bit.ly/Snapmkr
- or on Amazon : amzn.to/3DJjT5h
• Fillamentum 'Gold Happens' Extrafill PLA : bit.ly/fGoldPLA

Пікірлер: 65

@radmakerbro 2 жыл бұрын

Very nice way to mesh both subtractive and additive manufacturing methods. Usually when we subtract and add we get zero, however here we see the master making anything but nothing! Great work!

@brendanmcclelland3156 2 жыл бұрын

Hey Devin, I was the first to ever get your limited edition Astrolabicon! I decided to get one of these as an early birthday present for myself and was extra surprised when I received the actual FIRST one! I just wanted to say thank you and I'll be looking forward to series 2!

@MihaiDesigns 2 жыл бұрын

Awesome project, just right for holidays! 🎄

@domvalentine9137 2 жыл бұрын

i really liked the browns the first laser engraver made with its low contrast image, i think it would be a nice effect to do a first pass with that one and then a light pass with the snapmaker to give it definition and the neat dotted texture

@make.anything 2 жыл бұрын

It would take some work to line up perfectly, but that would look super cool!

@JZM006 2 жыл бұрын

@@make.anything will there be a review of the ender 7??

@larrybrown1984 2 жыл бұрын

Lithophane (sp?) is amazing!

@SgtTaz 2 жыл бұрын

For darker/more robust images on the CO2 I'll use a little borax and water mix brushed on before lasering. Gets a nice crisp result

@druzybear 2 жыл бұрын

Aww this is so sweet With the doggy the dark top left one was my fave it has a 3D vibe! but the one you used would be the best from far away at Christmas tree viewing distance

@GMxTekhe 2 жыл бұрын

Great. Now I want a laser cutter.

@NicksStuff 2 жыл бұрын

You could print her baby in 3D, she won't even need to deliver it

@darren990 2 жыл бұрын

nice video uncle Dev

@frickmystr 2 жыл бұрын

You should try etching the back of a mirror. You can then also paint the back of the mirror any color(s) you wish. Neat effect doing that.

@Amy_Dunn 2 жыл бұрын

If you want a darker color faster, just cover the wood in some painters tape while it's being engraved in the machine, then paint a black wash over it and peel it off after it's dry. That way you can keep the lights the same but have darker darks.

@RomanoPRODUCTION 2 жыл бұрын

Interesting 🤔

@make.anything 2 жыл бұрын

Great technique for black and white, but not sure how it would handle something like that dog fur

@viraglitch1878 2 жыл бұрын

@@make.anything hey devin you probably do not know me im an old subscriber and I wanted to become a partion member but I dont have the money all that im saying is thanks for the content you are the best dont let anyone say anything different Great wishes Armand Potgieter

@ALEXA-wm4qw 2 жыл бұрын

cute baby!

@smolboi09 2 жыл бұрын

finally he has returned

@PeranMe 2 жыл бұрын

So many good solutions here, thanks a lot for sharing this! Keep being awesome!

@Randomnic 2 жыл бұрын

this looks so cool

@JonnyRay82 2 жыл бұрын

Awesome!! Great inspiration! Can't wait to try these on my Snapmaker 2. :)

@make.anything 2 жыл бұрын

Have fun! I could've done all of this on the Snapmaker... would have to cnc the 5mm acrylic though ;)

@JonnyRay82 2 жыл бұрын

@@make.anything I ordered the new 10 watt laser. I wonder how that would do with thin acrylic.

@make.anything 2 жыл бұрын

@@JonnyRay82 it may depend on wavelength of the laser. And having air assist will help. 1/16" could be doable, I'd guess

@MrChinkman37 2 жыл бұрын

For better results on your images engraved on wood, use a cup of water with a couple teaspoons of borax for laundry. then lightly wipe the top surface that's being engraved, let it dry, and engrave much faster with lower power.

@make.anything 2 жыл бұрын

Sounds interesting! Are the fumes safe?

@MrChinkman37 2 жыл бұрын

@@make.anything it looks like it should be "safe" when lasering, but just like with wood, you are going to want to exhaust the fumes outside. For instance, it is not as toxic as burning vinyl or PVC, but pretty much all fumes that come off of laser cutting stuff are toxic and therefore should be exhausted outdoors, and you should use your laser cutter in a well ventilated area. Also, you should be careful not to inhale powder when pouring and mixing it in the water.

@MrChinkman37 2 жыл бұрын

Also, I found borax at Target locally in the laundry detergent section.

@joyjellyface4231 2 жыл бұрын

it took me a minute and a half to realize that the ornaments were hung on a tipi tree.

@notebookcomicsinc4451 2 жыл бұрын

Hi! I love your videos so far! I'm new to it but I've been watching ALOT of them. I love your 3d pen videos the most. Can you review the dusen salwings 3d pen?

@RomanoPRODUCTION 2 жыл бұрын

Devin, you're soon an uncle congratulations 🎉

@PawDieFur 2 жыл бұрын

I sadly might not have been the first to get one of the limited Astros, however I'm still going to be happy with whatever number I get, knowing that there is only 10 in existence made like that. I just got the shipment notification today so I'm excited for it in the next week.

@Inventorsquare 2 жыл бұрын

Nice project. Do you have any nieces or nephews yet, or will this be your first? Hope all goes well. You will make a great uncle.

@jpm80 2 жыл бұрын

creative video as always dev

@Faraway994 2 жыл бұрын

So I may be a bit ridiculous here, but you know those cool charging pads that light up, if you made one of those that charged things at normal speed, that would be so cool.

@robinjitsingh3733 2 жыл бұрын

Mannn your video are awesome.. I really like it .. And these little big project are unique and great 👍👍

@Guapogiboy 2 жыл бұрын

Great project. Can’t wait to see what you come up with next.

@autoraksakulsongsai501 2 жыл бұрын

Will you do a review on the snapmaker 2.0 .

@mahdimuhib 2 жыл бұрын

Yeah!!! I've mised your uploads. Thanks for the video. Merry tipmas

@endthefighting 2 жыл бұрын

Congrats on your impending uncleness! We're expecting our first in June, so I might just do something similar for xmas ornaments ^_^

@kristi6274 Жыл бұрын

Phenomenal 😭😭

@RomanoPRODUCTION 2 жыл бұрын

Dev, you're always welcome. We only need a bigger LIKE button ✅

@rustymemr7106 2 жыл бұрын

Hey devin, if you would want to make a big project, how about a fully 3D printed warhammer helmet?

@faroukalkhateeb 2 жыл бұрын

Can we get more 3d printer reviews

@IronMan-yg4qw 2 жыл бұрын

i would like to see you make a 3d model using only uv curing acrylic resin.

@PawDieFur 2 жыл бұрын

I just got my atom s1. 5/10 isn't bad especially for this puzzle. I'll definitely be buying a regular version because I don't Wana risk breaking the atom s1. I've now solved it about 7 times and love the method I figured out. I still haven't seen any "how to" videos so I'm pretty for sure the method I use is just ones that are on KZfaq somewhere. Ik I'll be doing a video on the s1 though since it is just amazing.

@weirdsnek4488 2 жыл бұрын

Unrelated but I like your shirt

@kurtlindner 2 жыл бұрын

Anyone have any recommendations for a super basic laser cutter? It only needs to go through paper.

@MAGA_Patriot2024 2 жыл бұрын

Great video, but now it has me thinking: does anyone think it's possible to litho the picture in the middle and build up the snowflake around it...thereby doing it entirely on a 3d printer? 🤔 I've done a handful of standalone lithos now, but have never built them into a larger print, and neither have I ever seen anyone else try it. I don't have a laser engraver yet, and my cnc is still in the box waiting to be assembled lol!

@thegrafxguy1 2 жыл бұрын

From my experience printing them standing up gives better results as you aren't dealing with stepped curves that way. Printing the snowflake would be much easier flat unfortunately. So I think 2 pieces is necessary

@MAGA_Patriot2024 2 жыл бұрын

@@thegrafxguy1 I think you're right. I never did a horizontal litho before, but it doesn't sound like an easy project.

@Jehty_ 2 жыл бұрын

Why not do a two part on the 3D printer? Just print the star and the litho separate and snap them together.

@JZM006 2 жыл бұрын

ender 7 review coming soon?

@o1ecypher 2 жыл бұрын

What kind of Printer is your sister using, Resin?

@iVolkswagen 2 жыл бұрын

Any Torshn updates?

@mayurvn6848 2 жыл бұрын

🤩🤩🤩

@makewithmegma 2 жыл бұрын

🔥💕👌👍

@deadlycucumber9020 2 жыл бұрын

ooh sno :0

@UncleSammy 2 жыл бұрын

I like top right dog

@tonno895 2 жыл бұрын

Pog

@jagdishgupta3288 2 жыл бұрын

Make 3d printer from 3d printer. It should be made 100 percent of 3d printer

@matijadjemrovski5665 2 жыл бұрын

45 viever

@NicholasMavrikBrandt 2 жыл бұрын

anyone else just face palm, here we have a maker, who is enjoying the benefits of opensource, and patons expiring, using adobe, and windows software :(

@ev-0163 2 жыл бұрын

What?