Custom Stepdeck Gooseneck Trailer Build PT 2

Рет қаралды 21,712

2 жыл бұрын

Moving right along with this project and it is turning out great. Let me know what you think of the trailer so far in the comments below. Don't forget to enter the plasma cutter giveaway and thanks for watching!!
Enter Giveaway Here: sweepwidget.com/view/59492-6j...
Business email: jesse@panicfabrications.com
Check out my website: panicfabrications.com/
Follow my IG: / . .
Find the Cut65DS and much more here:
yeswelder.com/?ref=vsys49ltcc
Discount code: JESSEMOFFITT

Пікірлер: 54

@Itsa_Mea 2 жыл бұрын

15:59 To help get rid of that twist, weld a piece of pipe long ways in frame from the front to the back. In the trailer industry it is called a Torque Tube. It will act as a torsion bar and stop the sway and twist.

@j_moffitt 2 жыл бұрын

Yes, I know about it. Planning to try other alternatives before going that route only because it’s just a 25’ deck

@ericgoldtooth5591 2 жыл бұрын

Yes absolutely do that

@gliderider7077 2 жыл бұрын

Man you built a good trailer, wish they still built them like that.. you and @ J.C. Smith Projects need to build one together, it’d sell sell like hotcakes!

@j.c.smithprojects 2 жыл бұрын

i always make the rub rail 2" flat bar and center it on the stake pocket. i have had trailers and flatbeds with the rub rail the same height as the stake pockets and sometimes i cant use the straps with the flat metal bent hooks because the rub rail and stake pocket together are too thick at the top or bottom. to get the hook on. love your builds. i have 2 trailers that i have been wanting to do something similar to for years. maybe one day. nice to see you are ok and doing well my friend.

@j_moffitt 2 жыл бұрын

I normally don’t loop my straps just because I don’t have many of that kind, I usually bypass the rub rail and hook to the channel underneath. Let me know when I need to come help you with that trailer conversion 😁

@wheelinndealin Жыл бұрын

Hell yeah love the trailer content, I am looking to make some changes to my gooseneck so your videos are great

@jamesmerkel9442 2 жыл бұрын

The drop down extend a neck to make ride as low as poss critical prt. Other is left & right bal sharing the force load, But hving way to pin/slide drop in towing load not ball.

@jamesmerkel9442 2 жыл бұрын

greater than sign or other less than sign. & diamond of overlapping stitched peddles adding to mix too.

@brianherron5400 2 жыл бұрын

Looks good 👍

@jamesmerkel9442 2 жыл бұрын

The guy can weld big time.

@2point..0 2 жыл бұрын

Those Custom P gussets look Kool!!! Liked #38 and subbed !!!

@jamesmerkel9442 2 жыл бұрын

If u must make a tiny step forward u can make the figure 8 track prop power not jet power but sitting in front of jet engine protecting high dollar fan blades, so u just throttle up the prop lower the jet burners for fuel saving or more jet landing reverse mode or taking off.

@dylanhockaday9878 2 жыл бұрын

It Nise and u can put a Electric tarp motor off of a dump truck on the jacks be able to run them up and down electrically

@robertogonowski9027 2 жыл бұрын

Trailer looks good ;) any equipment ( like battery , other) try to keep somewhere low on trailer. It’s just more safe.

@codyswilley 2 жыл бұрын

1:04 cut the what off lol. Looking good man. I really do like the work you do. That trailer is looking awesome. Keep up the great content

@j_moffitt 2 жыл бұрын

Haha

@justincook4069 2 жыл бұрын

@@j_moffitt would you help me build a flatbed for a 2006 Chevy 6.6 Duramax 4x4 crew cab skirted with hay forks and 2 toolboxes on each side?

@codywallace6948 2 жыл бұрын

I like the trailer but the flat bed on the second gen is sweet

@DISCYPLE777 2 жыл бұрын

Ganna be bad ass bro.

@jamesmerkel9442 2 жыл бұрын

U can personal use fab up anything only an issue if driver or selling vs personal ride mods.

@jamesmerkel9442 2 жыл бұрын

I saw something, devil diamond plate on side of your sheet inside of trailer, something here in plain sight as well.

@jamesmerkel9442 2 жыл бұрын

When I was in bathroom the towl had pretty overlapping 3 pedal design, hint/clue. Devil diamond is 4 but 3 sides no bottom pedal still great start idea pnt too.

@BowedUp 2 жыл бұрын

I’m confused

@jamesmerkel9442 2 жыл бұрын

My hve a snake skin way of putting those shapes together for greater pattern all combined art wise weld wise edges & stitching wise clothing increase strength, hinting idea starting to focus.

@jamesmerkel9442 2 жыл бұрын

u want to fab up a rectangle box to 1/2 ass rap the right & left better if 5/8 of full side balls. then u slot pull tow on pin drop in shaft.

@213_tom Жыл бұрын

When building a bed for a truck, how do you decide where to install the gooseneck ball? Air ride=anywhere? Leaf springs=in front of axle?

@j_moffitt Жыл бұрын

It should be over or in front of the axle. If it’s behind the axle you’re limiting the carrying capacity and it’s basically like a bumper pull where you’re taking weight off the front axle/wheels. Mine is behind the axle because this bed was originally going on a different truck and it was over or just slightly behind the axle. My plan is to relocate the axle on this truck so that it is underneath the gooseneck.

@Plourdes-adventure 2 жыл бұрын

Just get a flex tube quick and simple

@markroderick3300 2 жыл бұрын

Those are called dayton style wheels buds are regular lug nut wheels

@jamesmerkel9442 2 жыл бұрын

Just for time save not hving to get perfect weld gap fit bc alloy biscuit comes in many thickness & many sides should help speed up any basic weld job.

@fordlav 2 жыл бұрын

If some could please tell me how to change the hubs out I can't find anyone that can get me the hubs or bearings to go to 8 or 6 lug wheels

@jamesmerkel9442 2 жыл бұрын

Free GOD alloy super metal many faces to choose from sides biscuits so u can hve 2,3,10 many side biscuit alloys to choose from bc sliding a 4 or more side biscuit alloy from front & back sides is 8 grooves not counting the 2 faces of sheet u slide alloy biscuit into.

@jamesmerkel9442 2 жыл бұрын

working/thinking time.....

@asherdie 2 жыл бұрын

DOWN HILL MIG?!?!?!?! Your Jacks will fall off. Lol

@jamesmerkel9442 2 жыл бұрын

Only way to really protect a jet engine is to hve spiderman like prop fans ultra light hybrid drive in front to take the hit & shutter into tink safety glass like pieces. If glass plastic mix safety breaks yet ulta light bc it was spiderman web like super thick thick wise but ultra airy flat profile wise. 1 day electric pro no center shaft track/groove prop drive.

@hoggwild3706 3 ай бұрын

Why is your gooseneck ball so close to the back of your bed? It’s supposed to be 6” in front of the center of your axle.

@j_moffitt 3 ай бұрын

Says who?

@hoggwild3706 3 ай бұрын

@@j_moffitt says anyone who sales gooseneck hitches. Maybe I was wrong by saying 6”, but everything I found was centerline of axle or forward. Nothing says behind the axle.

@j_moffitt 3 ай бұрын

What about bumper pull trailers?

@hoggwild3706 3 ай бұрын

@@j_moffitt well I believe that one of the benefits of the gooseneck hitch is to distribute the weight of the trailer onto the tow vehicle better than the bumper tow style.

@j_moffitt 3 ай бұрын

You’re correct but that still doesn’t make the placement of mine incorrect. The reason mine is back that far is because this bed was originally going on a different truck with a longer wheelbase. Even though this isn’t “correct” it has not affected the trucks towing capability in any way. Does it take some weight off the front end? Sure, but so would a bumper pull of relative size. I’m rambling at this point, but I can sum it up by saying yes, it’s farther back that what it’s “supposed” to be, but this truck is heavy enough and has enough counterweight that it is acceptable.

@jamesmerkel9442 2 жыл бұрын

their idea just make bigger kindergarden improvement same devil play smack 1 propeller heads vs new 2 props same shaft thru water dah, they can't use B or 2 satanic smack, ie a or c charging demon hit.

@jamesmerkel9442 2 жыл бұрын

I saw some kind of waffle utube commercial most likely not mom & pop aloud an ad soon will kill all ad violators on my air u canbe sure nuke never misses the ball. It had what looked like better than spider web pattern just two tiny thin lines waffle.

@jamesmerkel9442 2 жыл бұрын

9: we still hve not seen any move of ME, Jesus or liitle old creator GOD. Just santanist max evil max twist max treason, max bill for everything on humanity, & max orchestrating/causing intentional, evil, even natural 100,500 devil yr lasting damage.

@jamesmerkel9442 2 жыл бұрын

your mic-ing your work too well, nearly hve to mute whole video.

@jamesmerkel9442 2 жыл бұрын

your mic-ing your work too well, nearly hve to mute whole video.