Custom Transport Wheels! Paint and Hubcap Clip Installation Tutorial

Рет қаралды 28,285

2 жыл бұрын

In this video, I will go step-by-step through how sand, prep, paint, and install hubcaps on your transport wheels! To achieve this look, I used rattle can paint and Simple.Clips to install hubcaps!
Check out www.simplec10.co for parts, merch, and DIY tutorials!
Parts mentioned in the video:
Simple.Clips: simplec10.myshopify.com/produ...
Chevrolet 64-66 Hubcaps: ebay.us/mmbDEC
255/30/22 Tires: ebay.us/GT1RPq
Duplicolor Black: amzn.to/3MtUKDI
Duplicolor White: amzn.to/3UrUIyg
Tape with Plastic: amzn.to/43jy0fs
Painters Tape: amzn.to/3KFmOCJ
Green Scuff Pads: amzn.to/3KoCbyb
Goo Gone: amzn.to/3nRnY5b
→ Become a Simple.C10 Subscriber!
→ Website: www.simplec10.co
→ Instagram: / simple.c10
→ Facebook: / simplec10
→ My Channel Home Page: @simple.c10
→ As an Amazon Associate, I earn from qualifying purchases.
If the video was helpful, remember to give it a "thumbs up" and consider subscribing.

Пікірлер: 128

@christophersmith3316 2 жыл бұрын

Tap Magic cutting fluid will change your life! And the smell is pretty great too.

@SIMPLE.C10 2 жыл бұрын

I’m going to get some! I’m learning the small tricks as I go. Thank you! I’ll be doing another set in a couple weeks.

@JoseHernandez-cy6bw 2 жыл бұрын

Two videos in one week!!! So awesome. Keep them coming, loving every minute of it.

@SIMPLE.C10 2 жыл бұрын

Yessir! I’ve had a few in the works and wanted to get them out! I know alot of people have been waiting on the wheel video. I think it turned out pretty good. Thanks for the support!

@arbot1 2 жыл бұрын

Great info, Pro vid!! Gotta get out there and do mine now!!!! Really appreciate your time! Thanks!!!!!

@SIMPLE.C10 2 жыл бұрын

Thanks man!

@ericbaker475 2 жыл бұрын

Looks amazing....very nice work!!!!

@SIMPLE.C10 2 жыл бұрын

Thank you

@krishauser9454 2 жыл бұрын

Nice work! Your videos are great! Keep up the good work!

@SIMPLE.C10 2 жыл бұрын

Thanks!

@windtalker4christ58 2 жыл бұрын

Awesome video ! Keep them coming good stuff for my build !

@SIMPLE.C10 2 жыл бұрын

Thanks!

@sweetlowLopez 2 жыл бұрын

Looking good 👍. A nice tip when I did my wheels I drilled all the holes for the clips before painting the wheels and not to worry about messing up the fresh paint. Great 👍 video.

@SIMPLE.C10 2 жыл бұрын

I thought about that then I was afraid the paint would get into the threads and it wouldn’t screw in correctly. Good too though. Probably will do that next time.

@stevestacy4501 2 жыл бұрын

Thread chaser kits (bolt/nut) for std and metric are essential to have around and would work perfect to clean the threads if you paint after tapping. Great video and C10 talk interview. Keep inspiring.

@SIMPLE.C10 2 жыл бұрын

@@stevestacy4501 Good point! My next set I plan to do the holes first then paint!

@ItsAdam12 Жыл бұрын

Love the white outer ring

@SIMPLE.C10 Жыл бұрын

Thanks

@roadreychevy8384 2 жыл бұрын

Thank you for the video, thinking of doing the white wall on a 62-impala steel wheel.

@SIMPLE.C10 2 жыл бұрын

Thanks for watching.

@BigThomTattoos Жыл бұрын

You can use a heat gun on the sticker to losen the abhesive

@SIMPLE.C10 Жыл бұрын

Good tip! I’ve used one on my last two sets now! Helps a lot.

@johnkizziah108 Жыл бұрын

My dad bought a brand new 66 short box. Still have it..gettin ready to do it to it. Have a fresh 409 and 4 speed for it..

@SIMPLE.C10 Жыл бұрын

Nice!

@1989jfoster 2 жыл бұрын

3m eraser wheel would make quick work of those stickers! Nice work man, wheels look killer

@SIMPLE.C10 2 жыл бұрын

Yea. That’s what I mentioned in the video but they are awesome. If I already had one laying around I would have for sure used it.

@lomeli710 2 жыл бұрын

Heat gun would loosen the sticker too.

@nursecuenca 2 жыл бұрын

Really nice and clean look. You ever think of cutting out back window and getting big window installed?

@SIMPLE.C10 2 жыл бұрын

Nah. Too much work for not that big of a difference. I don’t mind either way.

@davidbrown-55 2 жыл бұрын

Good stuff boss! Changes the whole look. Great vids, 55 in the backround?

@SIMPLE.C10 2 жыл бұрын

Not sure. I think so. Zach knows cars more than I do.

@SIMPLE.C10 2 жыл бұрын

Thanks for watching!

@56collin Жыл бұрын

Been watching your videos the last couple weeks and you’ve done a really good job putting these together, especially explaining the air ride, which I’m getting ready to tackle on myself. Somebody asked you about the tires you’re using. I’ve never heard of this Fullrun tire now that the video is a year old how are the tires holding up? Thank you in advance. I will probably be asking more questions down the road. John

@SIMPLE.C10 Жыл бұрын

I’ve sold this truck but I’ve ran them on a few trucks. Honestly, I just try to find the cheapest tire available at the time I buy. I usually pay around $450. If you get a high quality tire, it could be about $300 a tire.

@CWeezy-kk5wf 2 жыл бұрын

Great vid! Quick tip: I used a heat gun to peel stickers off takes 2 seconds and leaves very minimal adhesive on the wheel then hit it with some goo gone spray.

@SIMPLE.C10 2 жыл бұрын

Awesome! Thanks

@mandoa.9052 2 жыл бұрын

Nice work Travis, I admire your work! Can you post a link for the transport wheel, I need to order me a set! Thanks

@SIMPLE.C10 2 жыл бұрын

You actually can’t buy them from a company. I have a set right now I can ship you. Add me on Instagram Simple.c10 and send me a message.

@MAYCOCustomRestorations 2 жыл бұрын

Hey man what are you filming and doing your editing with? Always enjoy watching and need to step up my editing. Thanks

@SIMPLE.C10 2 жыл бұрын

iPhone 13 and a free app called splice.

@johnk4959 2 жыл бұрын

Awesome video man ! What are the sizes for the wheels and tires ? Can’t find it in your video description.

@SIMPLE.C10 2 жыл бұрын

No worries! And thank you. They are 22x9 255/30/22 Transport Wheels

@johnk4959 2 жыл бұрын

@@SIMPLE.C10 Okay, thank you !

@landonbonte313 2 жыл бұрын

Any idea what is needed to run these on a 67 c10? Ive heard as long as you have the disc. brake conversion in the front they fit right on to the hub but if drums on the rear you have to use spacers or bore out the center to fit the bug? TIA and love the truck!

@SIMPLE.C10 2 жыл бұрын

You nailed it. Disc brakes on the front and either bore out on the back or inch adapters.

@landonbonte313 2 жыл бұрын

@@SIMPLE.C10 do you recommend any specific adapters?

@manuelflores5901 2 жыл бұрын

Dig the videos. where are you getting the caps from . can't find ones for 64 gmc .

@SIMPLE.C10 2 жыл бұрын

www.classicparts.com/mobile/1964-66-Hubcap-Chevrolet-1_2-Ton/productinfo/64-029/

@matthaynes2056 2 жыл бұрын

I have a 69 c10 still has drums on all four did you have to use spacers on the rear? Thanks.

@SIMPLE.C10 2 жыл бұрын

If you machine the middle of the wheels larger you can fit them all around. If you don’t go disc brakes on the front you’ll have to do it or get adapters all around.

@miguelguerrero8837 11 ай бұрын

Love your videos brother. I have a 75 c20 and been trying to look for some 20’s 8 lug like these however I can’t find a set. Would you happen to know a place? Appreciate it in advance!

@SIMPLE.C10 11 ай бұрын

Detroit Steel offers 20s in 8 lug. Thanks for the support!

@Keith0580 2 жыл бұрын

Get you a 3M 07498 Stripe Off Wheel Eraser Wheel With Arbor 7498 for removing the stickers. You can thank me later. Awesome job!! Keep it up!

@SIMPLE.C10 2 жыл бұрын

Thanks buddy. I’ve used those in the past and they are awesome.

@davidrussell1346 Жыл бұрын

Why not drill and tap the holes before painting the wheels?

@SIMPLE.C10 Жыл бұрын

That’s what I do now. At the time when I painted the wheels I didn’t have the cap clip kit yet and didn’t want to wait on it because the wheels needed on the truck.

@estebanancira5518 2 жыл бұрын

Great idea. Nice look. What size wheel and tires on Black Dice?

@SIMPLE.C10 2 жыл бұрын

Currently? I think 15s. The truck in the video is No Association. It has 22x9

@gabelua4423 2 жыл бұрын

@@SIMPLE.C10 what size are tires on transport wheels?

@estebanancira5518 2 жыл бұрын

@@SIMPLE.C10 yea I meant the truck in the video. What size are the tires?

@JohnStaples-lf3ll 8 ай бұрын

Why not drill and tap holes first before painting then clean?

@SIMPLE.C10 8 ай бұрын

You will see in my later videos, I do drill and tap first. I painted first in this video because I didn’t have the clips yet.

@markowens3671 Жыл бұрын

I have looked everywhere and cant find a link for the wheels. Are they D-town smoothies?

@SIMPLE.C10 Жыл бұрын

The wheels I use are transport wheels. I explain in the video they are available on eBay and Facebook marketplace.

@Aopaite1 2 жыл бұрын

What rims and caps are those. I don’t see it in the links??

@SIMPLE.C10 2 жыл бұрын

Transport wheels. You can get them from eBay or Facebook marketplace. The hubcaps are on my linktree in the description. linktr.ee/simplec10

@scourge805 Жыл бұрын

Where can I pick up a set of transport wheels?

@SIMPLE.C10 Жыл бұрын

I find mine on Facebook marketplace. I know eBay has some occasionally.

@vruano2012 2 жыл бұрын

How mAny spray cans of each product you go through?

@SIMPLE.C10 2 жыл бұрын

4 white 8 black 8 clear

@LTXOutlaw Жыл бұрын

What size cap fits the transport wheels

@SIMPLE.C10 Жыл бұрын

I use 10.25 dog dish caps with my simple.clips. You can get other sizes but you would need a specific cap clips to fit.

@joeleal4191 11 ай бұрын

What size rim is this? Any backspacing?

@SIMPLE.C10 11 ай бұрын

22x9 6 inch backspacing. Standard transport wheels.

@cadilakisrodcustom 2 жыл бұрын

I bought a set of transports to run on my 61, but they don't get along with my factory inner fenders very well 🤣

@SIMPLE.C10 2 жыл бұрын

There’s a video for that!

@cadilakisrodcustom 2 жыл бұрын

@@SIMPLE.C10 I originally built my truck to run 15s, so I went with big drop spindles. Now I wanna run the deuces and keep the factory sheet metal

@johnvandertoorn3234 Жыл бұрын

Very nice, where do you get a set of transport wheels?

@SIMPLE.C10 Жыл бұрын

Facebook marketplace usually.

@johnvandertoorn3234 Жыл бұрын

@simple.c10 and that's how they're advertised? Are they dealership take off wheels? I'd love to have a set.

@SIMPLE.C10 Жыл бұрын

Yes. They take them off at the dealership but some people can find them and buy them

@johnvandertoorn3234 Жыл бұрын

@simple.c10 sorry about all the questions but I really love those wheels!! What years and models of new trucks would match the bolt pattern for my 63 C10? Thanks again and love your truck.

@enriquecoronado3380 Жыл бұрын

Where did you find these wheels? Or how can I find a set

@SIMPLE.C10 Жыл бұрын

eBay or Facebook marketplace

@matthewmaciel2172 2 жыл бұрын

Were you buy transport wheels

@SIMPLE.C10 2 жыл бұрын

Facebook marketplace or eBay

@mikenoriega8073 Жыл бұрын

What size tires u running

@SIMPLE.C10 Жыл бұрын

255/30/22

@Flynn2583 Жыл бұрын

What is the wheel backspace and what size lugs? 7/16” or 1/2”?

@SIMPLE.C10 Жыл бұрын

Transport wheels are 22x9 with 6 inch backspacing. They are 1/2

@Flynn2583 Жыл бұрын

I see the 1 inch spacers in your link tree. Are you using 1 inch spacers on no association?

@SIMPLE.C10 Жыл бұрын

Yes

@MeMe-jm4di 9 ай бұрын

Do you sell this rims painted like that?

@SIMPLE.C10 9 ай бұрын

I could but it would be expensive.

@1964summit 3 ай бұрын

Tap first, paint after.

@SIMPLE.C10 3 ай бұрын

Good advice. I’ve done that on all my wheels since.

@adamvalentine1985 Жыл бұрын

Where do you get your tire deals? 255/35?

@SIMPLE.C10 Жыл бұрын

ebay.us/GT1RPq

@BigFactz66 6 ай бұрын

What color is this truck?

@SIMPLE.C10 6 ай бұрын

It’s called liquid charcoal

@laleyendatattoobizz 2 жыл бұрын

What tires are you running and size?

@SIMPLE.C10 2 жыл бұрын

255/30/22 Lionhearts

@laleyendatattoobizz 2 жыл бұрын

Appreciate it I just ordered my set and now I just have to find the dog dish, and order clips

@SIMPLE.C10 2 жыл бұрын

@@laleyendatattoobizz I have a link for the dish dish. Under product links at the bottom linktr.ee/simplec10

@freshsportswear 2 жыл бұрын

You think I can get those rims in 26?

@SIMPLE.C10 2 жыл бұрын

Not transports. They only come in 22s. You can try detroit steel wheels.

@freshsportswear 2 жыл бұрын

@@SIMPLE.C10 thanks a lot.. dope truck I subscribed

@killashizilla3830 Жыл бұрын

A tip from a keyboard genius. 😂Heat gun to help remove stickers off wheels.

@SIMPLE.C10 Жыл бұрын

Thanks! I’ve used a heat gun on my last two sets after that one lol.

@killashizilla3830 Жыл бұрын

@@SIMPLE.C10 thanks for cool vid’s. Also, subbed your channel.

@johnmccool7551 2 жыл бұрын

Heat gun baby .heat gun

@SIMPLE.C10 2 жыл бұрын

Yea. I’ll be using one on my next set of wheels coming soon.

@bradmason8334 Жыл бұрын

Why not drill 1st, then paint?

@SIMPLE.C10 Жыл бұрын

When I painted them I didn’t have the clip kit with drill bit and tap. My latest two sets I have drilled before painting. Good suggestion.

@bradmason8334 Жыл бұрын

Not a suggestion, just asking to prevent me messing a set up😂. BTW, what size transport wheels & tires are you running on black dice? Thanks for the vid.

@SIMPLE.C10 Жыл бұрын

@@bradmason8334 all transports are 22x9. I run a 255/30/22.

@nickmartinez7163 Жыл бұрын

Sweet azzz Mofo

@SIMPLE.C10 Жыл бұрын

Thanks!

@lovebigbootie69 Жыл бұрын

You can get a pack of 20 clips on ebay for $20. Not sure why you spent $100 on the same thing

@SIMPLE.C10 Жыл бұрын

The kits online come with the tap, drill bit, stainless screws, and a template. You’re paying for extra for the piece of mind if knowing you’re installing them in the right location. Especially with a newbie like me, I wanted to feel confident about where I was drilling into the wheels. The eBay clips would absolutely work if you had the knowledge and know how of what to do. This is the reason I paid for a kit. When I purchased the clip kit it was $60 on sale so I felt it was worth the investment.