a great resource of information and a real life demo of these different polishes. Thank you for your time!

Thanks for this. Will definitely give it a go on my buffer machine

really lovely video! you have a great manner and a soothing voice. Cheers mate!

Thank you for a very informative and interesting video Sam

Thank you so much for the useful information!

An excellent video, exactly what information i was looking for and explained so well. Thank you

Excellent video! Thank you for positng.

Thanks very much. I love your instructions. Very clear.

Thank you! I am prepping steel for gold plating and this was very useful in making the most with my compounds correctly

Great video. Straight to the point information. 👍👍

Thank you so much for the useful information

Great video, thanks for posting! I'm learning how to polish out scratches and engravings / monograms on silver, so this helped. I just ordered the Dialux Blanc and some new polishing wheels. Can't wait to start practicing!

Thank you so much for your time & video 👍👍 Learned a lot 👌All the best !!

Good to learn about polishing stuff and how they are applied. Lots of respects to you and thank you for this video. :-)

Thank you so much for this excellent and informative video, it's been a tremendous help.

Thanks that was a very informative video.

Thanks so much for the video! This has been very helpful!!

Nice video and the info about which mops to use is excellent! I've got great results on stainless watch cases by using Dialux Blue and Dialux Green after a cycle of wet sanding up to 5,000grit.

Thanks for the great info. I really appreciate it.

Excellent! I learned something today.

So glade i watched your video today! I am realizing i wasn't correct in the colors of polish... I work with silver and usually i use red then white and i never cleaned between the two, now i know from where tge stains came haha, thank you very much

Super helpful video! Thank you

I compared the blue stick to the jar of red Rouge that comes in the Dremel kits. The Dialux is TONS better than the crud from Dremel. No comparison. And this was on a stainless ruler that was unprepped beforehand. I didn't even clean it. And it was DULL. The light blue stick and a dremel 1 inch felt wheel put almost a mirror finish on it with almost no effort. I was stunned.

Thank you for such nice video!

Thank you i found this very helpful, much obliged.

Thanks for your knowledge

Danke für's Einstellen!

Brilliant! Thanks for this.

great video, thanks!!!

Great! Very useful!

good review, thanks

Interesting video, just bought a Dremel to clean up an old guitar I've jot, this could come in useful!

Hey Dave! Thank you so much for the very informative and helpful video. I have a question.. I have a piece of pure C110 copper that has a few scratches and small gouges.. What would you recommend to remove these imperfections and give it a nice shine? Thanks again

Great thank you. High from CANADA. 🙂

Thank you !

Helpful, cheers.

thanks polishing compound

Very helpful!

Need to buff my zippo and clean it soon so will give this a try?!

Very helpful video! I'm looking to clean up some Chasseur Escoffier copper pots that I've had for years. Can you help me to choose the right compound and buffer? The short story is that I accidentally burnt one of the pots by putting on some water to boil a few eggs, then lay down on the sofa and fell asleep (of course!!)... Woke up the next day to find the pot still on the stove and completely black!! Thankfully the pot seems structurally OK-no warping! I've got a fair way in restoring it using Bar Keeper's Friend, a lot of elbow grease, and time. But there are still a lot of black fleck marks on it still and the copper has dulled a lot. I'm looking to purchase a bench polishing wheel to fix this one up.... and, of course, keep it to touch up the pots to a beautiful shine every year or two. If you have any suggestions on what combination of wheel and compound would most suit the job, I'd appreciate it if you could let me know!

great review. it helps a lot. I plan to use them on my watch cases and bracelets. most are stainless steel. some however are titanium. any recommendation for titanium ?

thank you very helpful

This is VERY helpful, thank you.😃

thank you. could you show us which compounds are used for watches stainless steel bracelet !

Thanks for your videos. Where can you get these products? Some places sell counterfeit

The bests explanation ever.!!!! Thanks very much.😘😘

DO you think I can use the green one to polish a tiny scratch on mineral glass, a watch crystal?

thank you very much ! 🙏

Great Video. Thank you. Dialux owes you a commission.

Hi there. What would you suggest using on large areas of stainless steel ? Thanks

This video is very useful

Thank you😃👍

So I am just getting into polishing my own jewelry because I want that shine from my silver chains back, what would you suggest, the white? Or the yellow? And what bits am I looking for when it comes to the dremel

Great vid What should i use to polish acrylic?

orange then grey then green for steel tools, works fantastic

Where can I find the cotton cloths for the drill?

Do they have polishes for rocks and gems? Great vid BTW

Thank you 😄

Thank you, but I don't want to polish, I want to clean mineral deposits from glass. I've tried with a Dremel, wool tips, and the red/brown Dremel polish and it doesn't work. Do you know of a polish that might remove mineral deposits but not damage the glass?

Thanks! Which on do you suggest for polishing resin?

Скажите пожалуйста каким цветом полировать алюминиевые диски колесные???( Please tell me what color to polish aluminum wheels ???).

The black also good

Thank you.

Hi Dave, Can you suggest which one I use on SS taps in the bathroom?

Thanks!

I have a glass magnifying glass with some scratches what color’s would you recommend for that / glass 😊

Which compound would I need to polish Chrome finish golf clubs with light normal scratches. Thanks

What is best for polishing titanium(watch) to high reflective finish?

Hi I have acrylic sheet need to polish it is fogy !! is this compound do? Thanks

Hi, which one giving more polishing, green or white one for stainless steel?

Do you have a link for the dremel bits?

Thanx 😊

Which colour compound i use for alluminium parts of my royal Enfield bike?

Are the mops made from scratch or purchased?

For Brass and Copper ?? which is the best of all?

Which one for the plastic?

Is this available on online shop?

Thanks.

Just a heads up if some of u came for info on using these for knife strops I use red with gray or u can green and white

Does anyone know what wood is used for polishing watch cases and movements?

What I need to polish a gold and diamonds?

How can we have these tools

This is a lot off efforts. Thank you

I am no a jeweler but I use the gris to hone my knives, chisels, etc.

good

😊

🙏🙏🌹🙏🙏👌👏super

nothing about plastic 😭

Used it for the first time last weekend definitely worth buying if you're a person who likes detailing your own car recommend first time to use on lowest setting 800 so you don't burn paint don't leave in one spot keep moving it over paint easy to use kzfaq.infoUgkxfzbDkCRyv3CFXnLZI4APZtRRuG2uRmP2 truck looks like new again used maguires black light battery life like all milwaukee products seem to hold up well 😀

Thank you!