How to Polish ANYTHING with the Dremel Rotary Tool
Рет қаралды 1,820,114
4 жыл бұрынIn this Dremel metal buffing polishing tutorial, we are taking the Dremel with buffing compound and Flitz to put a buffing mirror shine on different types of metal an finishes.
► Flitz metal polish on Amazon: amzn.to/2LjIc0F
► Table Vise on Amazon: amzn.to/3cyRbai
► Buffing compound set on Amazon: amzn.to/2Zwkcwk
► Dremel polishing kit on Amazon: amzn.to/2MK8hJc
► Dremel 4000 on Amazon: amzn.to/2HzYTUe
► Dust Mask on Amazon: amzn.to/3pj7jCy
► Fog proof safety glasses on Amazon: amzn.to/2NFVKGm
In this video you will learn how to:
-Use your Dremel rotary tool
-How to put buffing compound on
-What speed (RPM's) to run your tool at
🔧 View my entire tool list on KIT: kit.co/corneliuscreations
🔔 SUBSCRIBE HERE: bit.ly/2mEWLQk
► Kutzall Burrs - Use coupon code CCREATIONS (case sensitive) for 5% off.
www.kutzall.com
✔ JOIN OUR FACEBOOK GROUP:
/ woodcarversoftheworld
WATCH NEXT:
• How to Wood Carve Basi...
• How to Wood Carve/Powe...
• How to Wood Carve/Powe...
⮞ GET 30 DAYS OF AMAZON PRIME FOR FREE WITH THIS LINK:
amzn.to/2A5VYCj
⮞ BUY THE TOOLS & SUPPLIES I USE ON AMAZON BELOW:
► Foredom SR (My favorite carver) amzn.to/2HRXbzC
► Dremel 4000 Carver: amzn.to/2Ubc4TS
► Start carving with this wood: amzn.to/2AEZkMG
► Dust Mask: amzn.to/2MAJcOV
► Anti-Fog Safety Glasses: amzn.to/2ULu2ej
► Budget Rotary Burs/Bits: amzn.to/2Va2Q79
► Pre-stain: amzn.to/2Y2QUqs
► Dark Walnut Stain: amzn.to/2MAskrn
► Urethane: amzn.to/3cDc4jS
► BeaverCraft Carving Knives amzn.to/3dFqZvp
► Basswood Blocks: amzn.to/3dFr9Tx
► Good Wood Burner: amzn.to/3czX1aH
► Best Wood Burner: (RazerTip): bit.ly/2IeR5rP
► Carbon Transfer Paper: amzn.to/2A9uCeq
MUSIC
► app.soundstripe.com/referrals...
☀ Connect with me:
►FACEBOOK: / cornelius. .
► INSTAGRAM: / cornelius_cr. .
► KZfaq: bit.ly/2mEWLQk
🔔 Subscribe : KZfaq: bit.ly/2mEWLQk
“We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites at no extra cost to you.”
#CorneliusCreations #woodcarving #dremel
@mud940 23 күн бұрын
I love seeing PPE intros, when I was younger I always rolled my eyes Now older, I’m glad I had those reminders
@timkrouse345 10 күн бұрын
Yes - always CRITICAL to at least wear safety glasses any time that Dremel is spinning.
@ronlheureux7623 4 жыл бұрын
I’m a retired dental technician with 38 years of experience. I recommend not cross contaminating you buffing wheels. Cleaning them also wears them out quickly. Another thing that you might try is using, say, a 1/2 to 3/4” mounted soft polishing brush before lying heavy pressure on you item. Robinson is a good brand. That removes a lot of detail on something like your dime. The Flitz is a great product, as well. The red rouse is normally very fine for a final shine if you aren’t using Flitz. I have polished thousands of gold crowns and jewelry casings.
@CorneliusCreations 4 жыл бұрын
This is great advice! Thank you for sharing sir!
@ldhmnh 5 ай бұрын
Whoop-de-doo
@goilo888 23 күн бұрын
@@ldhmnhGreat counter-argument.
@anthonycoster8774 Жыл бұрын
I've been using a Dremel for years and never thought to hold the flexshaft in a swivel vice. This is lifechanging for me.
@CorneliusCreations Жыл бұрын
Glad it helped you!
@PavelPower 8 ай бұрын
I was thinking that also. I can't seem to find one like that. Do i search for swivel vice? Where can I get one?
@riteshprasad4103 9 ай бұрын
So when I decided I would like to try some wood carving, kzfaq.infoUgkxfPgcZ5_Cl0HDUKkMJAKde11YKQZVgMoR I went all out and got the best Dremel I could find. I quickly discovered that carving just by hand is a long process (and painful on the hands). Rotary tools can all basically do the same things, but this one has two particular features that set it apart. First, you can use it much more dextrously since it doesn't have a power cord pulling on it. You can also take it anywhere without pulling an extension cord along with you. It's hard to overestimate the benefit of this. You'd think that you'd have to sacrifice some power for this, but this Dremel has a very strong and long-lasting battery and it charges quickly. Secondly, while most rotary told have a few speed settings, this Dremel has a sliding scale, from very slow to extremely fast. This thing can do about a million different jobs, but I would point out one drawback, which is certainly not unique to Dremel, is that it's a small chore to change out the different tips.
@malcolmnesky9897 3 жыл бұрын
Awesome! I make knives and I have a bunch of big belt grinders and bench mounted buffers that I use. I never would have thought of my various dremels being something I can use for the fine detail work. Your video opened a whole new door for my creative thinking! Well done bro! Keep up the good work!
@pgimacahilasadrianjude5699 3 жыл бұрын
Thank you for this! I don’t own a Dremel, but I do own a Black and Decker rotary tool. The manual was not very helpful so I tried to do trial and error and watch youtube videos. So far this is the most helpful. I never knew the small brick was for the felt wheels. I thought it was a grinding stone for the different drill bits (the one with the different shapes).
@LenCanter 2 күн бұрын
Thank you for the video ! Just spent 2 days cleaning/polishing my guitar, using Brasso, Gibson Guitar. Cleaner/ Polish, Lemon Oil, a polishing cloth, and a whole lot of elbow grease. Figured that there’s got to be an easier & quicker way to do it. The result for my guitar was excellent: However, I still have 21 guitars to do. Thanks Again, Len, Arecibo, Puerto Rico. 😁🌴🌴🎸🇵🇷
@clwdeerhunter Жыл бұрын
I definitely learned something. My grandpa passed away about 2 years ago and I got the shell casings from the honor guard that did his military graveside service. I’ve been wanting to to make a necklace out of one of the shells but didn’t know how to go about it. So I’m going to polish it with my dremel and drill a hole in it. Thanks again for the idea/inspiration 👍🏼
@hallelujah8141 4 жыл бұрын
Your videos are so instructive! I've just bought my first rotary tool on the recommendation of a friend, and didn't realise how versatile they are! I'm educating myself with your vids to learn all the possibilities and can't wait to get started. I've subscribed - thanks so much! (Uk) 😊
@CorneliusCreations 4 жыл бұрын
Right on! I am happy to hear that you are getting a lot out of the videos! Congrats on the new rotary tool!
@hallelujah8141 4 жыл бұрын
@@CorneliusCreations Lovely boy. You remind me of my son 😂😂😂x
@TheJofrica 4 жыл бұрын
Another great video. I polished my sink faucet about a month ago and yeah I am hooked. Thanks for the reminder to wear safety gear while doing this. Nice one again!
@CorneliusCreations 4 жыл бұрын
Right on! Glad you enjoyed the video!
@michaelatwood391 2 жыл бұрын
Thanks for the demonstration. After I bought a Drexel three years ago I finally know what to use it for. Awesome
@haqeeqee 4 жыл бұрын
Here’s an idea: You could use a stencil (or use tape to make out a shape) and polish only the exposed areas to make a design (on a flat piece of metal for example). That way you could make a shiny, polished design against an unpolished background.
@CorneliusCreations 4 жыл бұрын
Good idea!
@haqeeqee 4 жыл бұрын
@Cornelius Creations Thanks 😊
@marcn8750 Жыл бұрын
@@CorneliusCreations what happens if you do not use any compound?
@johnnysalazar1552 Жыл бұрын
Will that work polishing rough diamonds
@featherfruit 9 ай бұрын
That's like a holo pokemon card 😮
@michelletanner948 3 жыл бұрын
I make wire weaved jewelry and have a dremel but never real knew exactly what compounds and pads to use to help polish and also buff out tool scratches. You just helped with both thanks so much.
@CorneliusCreations 3 жыл бұрын
Glad you enjoyed it!
@Lantlady 4 жыл бұрын
Great video. Thank you for sharing. I am a woman in Sweden who are making so far simple jewelry so this is a great help. My grown-up son is getting a tie pin with his initials so it is now nice and shiny thanks to you. Since I used to live in Texas (5 yrs) some years back I also have to say I loved hearing you talk :-)
@CorneliusCreations 4 жыл бұрын
Haha! Right on. I am glad the video helped you and that you enjoyed hearing my accent haha.
@juliepallone9976 2 жыл бұрын
How nice to see a man demonstrate something … with lovely hands, …. started watching a video last week and the man had long dirty fingernails, couldn’t keep watching .. I just bought a Dremel and this video has helped enormously… thankyou !
@electraheart7745 2 жыл бұрын
That shiny penny is so satisfying to see. I have found so many uses for my new dremel now!
@wadem4995 3 жыл бұрын
I get more enthusiastic with every vid, your a great teacher Matt!
@CorneliusCreations 3 жыл бұрын
Glad to hear that! Thank you!
@bluenote6519 4 жыл бұрын
OMG! What a great vid. I've been trying to figure out how to use the two dremels I have and this really answers my questions - Thanks
@CorneliusCreations 4 жыл бұрын
Glad you enjoyed it!
@joette4677 Жыл бұрын
thank you so much, I have had my Dremel for around 12 years and only used it a couple of times, because I didn't have the knowledge, but now I am learning a lot from you,, I am going to put my Dremel to work
@danielmeecham464 4 жыл бұрын
Hey, thank you very much for the great video! Due to a lot of grinding and cutting, I have actually over-worked about five dremels to death and had to replace them, but they're great! Dremel makes a robust rotary tool. For example last just month, I put on an over-sized wood blade on and cut off the running boads off my 2006 Ford Explorer because the mounting bolts were rusted to the clips. I've tried a few times to sand metal things to a polish but failed for lack of know-how. This video was excellent with it's plain language instruction, clear demonstration as well as its inclusion of it's list of parts, accessories, and compounds. I will now be picking up a clamping vice and other items you used. Now I`m anxious to get started on a bunch of my other projects. Well Done Man!
@CorneliusCreations 4 жыл бұрын
Hey Daniel! Sounds like a fun project! I am glad the video helped you and gave you good insight!
@kevinbaker2470 3 жыл бұрын
Wtf, how big of a blade did you put on to be able to cut running boards? 2 1/2", 3"? And which arbor did you use if ya don't mind me asking. 20 bucks for a cutoff tool at HF, angle or dye grinder would be my thought process.dremel ftw
@danielmeecham464 3 жыл бұрын
Hi Kevin, The whole freak'n running board is mostly plastic, except for a few heavy guage metal brackets. I couldn't use a regular hand grinder because it'd make a big mess of burning plastic. So I used a dremel with a wood blade that was about 1 3/4" in diameter. I got the blades from Princess Auto. The problem there was that a few times when the blade started spinning, the blade went to a wobble and the arbor alarmingly bent ninety degrees with the blade still attached -- ready to fly off as a surprise shuriken. So I found 1 1/4" mini wood blade that did not wobble and spin off. It took about two hours of carefully cutting the plastic for both running boards, and about another hour or so grinding off the metal brackets. It was a little dodgy at times ( I seriously recommend safety glasses), and I smoked the dremel. But, it was well worth the effort because getting in and out of my truck is a lot easier and there is no longer a rust maker/holder.
@anthonycastillo245 3 жыл бұрын
Total newbie to Dremels / metal polishing - VERY useful info, thanks a mil!
@CorneliusCreations 3 жыл бұрын
Glad you enjoyed it!
@AgateDad 4 жыл бұрын
This was super helpful! I have the same setup that I will be using on my channel over the winter months polishing agates!
@CorneliusCreations 4 жыл бұрын
Right on!
@dang7824 Жыл бұрын
This video gave me the confidence to finally give some shine to my metal handrail on my corridor & stairs. Never used the dremel to polish anything before but I am somewhat familiar with stationary buffing wheels.
@willydodson1 3 жыл бұрын
Great video! My experience is both products work great, it just depends what your polishing and how your polishing. I learned by doing over time as does anyone else. Happy polishing!
@johnnewlon8541 2 жыл бұрын
I used mine for stone cutting and inlay work in fine jewelry. Chip opal inlay really turned out nice. Inlaying stones into other stones to get a flush finish is really sharp. Learn a little gemology of the stones you work with.It will save you some headaches.This one of those things that is "Never say never". Great video thanks!
@goindown71 4 жыл бұрын
NICE! Thanks for this. Love learning new ways to use for my Dremel. I've never polished anything and this gave me a road map to start. Much appreciated.
@CorneliusCreations 4 жыл бұрын
Glad I could help!
@victorstalick3719 3 жыл бұрын
I have my Dremel with the flexible shaft semi-permanently mounted at the end of my workbench. It has served me in countless jobs, but I have neve tried the polishing tools. This video has opened up new possibilities for me.
@markb8954 2 жыл бұрын
Interesting. Me too. We use our dremel sanding wheels for a ton of things, primarily touching up the bottom of an item hot off the lathe. Recently did some larger engraved designs on outdoor benches. That said, I did always wonder what the little corskscrew thingy was for. Soooo, thanks!
@deborahmacdonald9518 4 жыл бұрын
Great video - am just getting into working with metal, and LOVE it! Your video is very informative. Please keep submitting videos for us "newbies to metal working!"
@CorneliusCreations 4 жыл бұрын
Glad you enjoyed it, Deborah!
@SKtube0 4 жыл бұрын
Love my Dremel! Use it to polish up my firearms and it works wonders for engraved pieces. Have a custom engraved 1911 and after a good polish with my Dremel, the gun sparkles and glows like it's brand new. Great little tool.
@CorneliusCreations 4 жыл бұрын
Right on!
@HerbOldenburg 3 жыл бұрын
Have you used it to polish a shotgun? I have this old Springfield model 94 that has no factory blueing - am almost thinking to try this to see if I can clean it up and not damage the engraving.
@SKtube0 3 жыл бұрын
@@HerbOldenburg Yes, I have. It takes some time given the size of the tool and depending on how custom the engraving is though. If you're just polishing, your engravings should be fine.
@vibrantlight90 4 жыл бұрын
So glad i found your channel!! I’ve had my dremels for sometime now and i WISH i would have looked you up prior!! Your tips, and advice is SPOT ON!!! Your work is awesome!! Thank you for all that you share!!! I really appreciate it😆👍🏼😎i smacked the like and subscribed😎👍🏼🇺🇸
@CorneliusCreations 4 жыл бұрын
Awesome! Glad you are finding the videos helpful!
@hellosweetheart3350 3 жыл бұрын
@@CorneliusCreations same here thank you!
@klondyguerra 3 жыл бұрын
Thank you so very much - I am learning all about how to jewelry using youtube videos and bought a Dremel and I THANK you so much for doing this video because its nice to see how the tools are used :), very helpfull.
@gailgwood 2 жыл бұрын
Best video on using a Drexel. Thank you so much!
@DennisHicks78749 2 жыл бұрын
It is better to change buffing wheels when you change buffing solution. Cleaning it that way won’t remove all of the initial compound. Polishing is a process of progressing to smaller and smaller grit compound, just like sand paper. So you keep a wheel dedicated to the compound it had initially applied to it.
@philhemenway3503 Жыл бұрын
I color code my Dremel buffs with a Sharpie pen.
@DennisHicks78749 Жыл бұрын
@@philhemenway3503 that works! Good suggestion. Too bad few viewers will see it. Any method of assuring only one type of compound ever touches the buffing pad is essential. Also, he didn’t specify the type of mask required. In my jewelry fab class we had to use N95 masks for polishing. Now I use an N99.
@valebliz 4 жыл бұрын
Nice tutorial. I tried to polish some of my knives blades, discovered that for most modern cutlery steels you really need to work with diamond compounds.
@CorneliusCreations 4 жыл бұрын
Right on!
@missvickie1975 4 жыл бұрын
I literally only THOUGHT about researching how to polish my resin pieces, and I do have a Dremel & Flitz, and this video popped up in my Recommended Videos section. How did KZfaq know I needed to see this video? And I luv the eyewear and mask, I shall be ordering me some of those. Thank u sir for making & sharing this oh so perfect video!!
@CorneliusCreations 4 жыл бұрын
Glad to hear the video helped you!
@CrucesNomad1 3 жыл бұрын
Always interested in new tools and techniques. Understand this was just a primer. Im sold on your vise, a must have for me.
@jdisdetermined 3 жыл бұрын
Great tip about working clean. I do paint correction professionally, and working clean and controlling residue is the key to success. I like the Flix, it's very good for light jobs, great for lightly polishing glass. It has a long working time for refining, but the cut leaves something to be desired. I have the stick stuff too, but I usually just use the 3D ACA compound I use for paint correction to cut and then finish with any polish I happen to grab. I use CarPro Metallicut for high end work. Works incredibly well for both cut and finish. It's perfect for DIY guys, but not very cost efficient if you're a professional. Thanks for the video!👍👌✌
@keithmcmullen9737 Жыл бұрын
I just don't see much difference wen it comes to the nano amount of cross contamination. I guess it's one of the things You have to experience ur self.
@jdisdetermined Жыл бұрын
@@keithmcmullen9737 For me that mostly applies to the paint correction side. You can lose consistency and cut effectiveness and it can also be very difficult to finish down if you don’t work clean. Metal polishing isn’t nearly as sensitive to it, and it breaks abrasives down fast anyway. If you’re trying to highly refine softer material like brass or gold it can be a factor.
@John-mh6mi 4 жыл бұрын
Great video, I am understanding this tool is so much more then I ever imagined. Thank you for sharing your knowledge...
@CorneliusCreations 4 жыл бұрын
Awesome! So glad they are helping you!
@melijegasini2014 Жыл бұрын
Thank you for this video. I did not know how to use the Dremel tool to buff anything with! I appreciate you very much!
@CorneliusCreations Жыл бұрын
Glad you enjoyed the video!
@aswencak 2 жыл бұрын
Excellent video, in the process of restoring/refurbishing a vintages sewing machine and trying to get the scratches out of the metal,parts and get them all shiny again has been a challenge.
@chrisfairall1923 4 жыл бұрын
Thank you so much I just learnt how to adapt my dremel for buffing. Newbee here so any info is wonderful
@CorneliusCreations 4 жыл бұрын
Glad you enjoyed the tutorial!
@MrManta2012 4 жыл бұрын
Harley Davidson riders love Flitz to polish their bikes. I used since 73. They take the standard polish to mirror finish.
@CorneliusCreations 4 жыл бұрын
Right on!
@dustii_patron8031 3 жыл бұрын
Very helpful and simple video!! Perfect amount of time to sum it all up so I could get back to my project. Appreciate you for making this
@CorneliusCreations 3 жыл бұрын
You're very welcome!
@wesg3084 3 жыл бұрын
I never would have imagined that you could polish with a Dremel. Cool video and great tips.
@CorneliusCreations 3 жыл бұрын
Glad you liked it!
@decayingxclover 3 жыл бұрын
Came for the instructions, stayed for the accent
@SuperMommalove 3 жыл бұрын
100%
@cherrysunburst1959 3 жыл бұрын
Got to be kidding!
@jonnyd4306 2 жыл бұрын
What y'all have a thing for southern accents? 😂
@travisedgar1780 2 жыл бұрын
What accent?
@luminousfractal420 2 жыл бұрын
i was waiting for the leatherman embedded through fog proof glasses
@joyceeberner 4 жыл бұрын
Always use separate buffers for each compound. Also, mini grater or small fork with tines close together is great for fluffing up matted buffs.
@melijegasini2014 Жыл бұрын
I don't really know what brands of material to look for when buffing my teeth!
@arthursoto4285 3 жыл бұрын
I learned a lot today. I love shining up all of stuff so this is perfect . I need a dremel
@coritraylor8380 3 жыл бұрын
I am just getting started but you are my favorite dremel instructor!
@CorneliusCreations 3 жыл бұрын
Happy to hear that :)
@tylersmith9868 3 жыл бұрын
Little did he know that mask would become his best friend one year later
@lisamessenger3713 Жыл бұрын
What?
@cynikalX Ай бұрын
check the video date, it was uploaded in 2019.. the guy in the video was clearly ahead of the pack w/ a face-mask like that :-D
@tylersmith9868 Ай бұрын
@@cynikalX Uhh I think that's the exact point I made in my original comment
@codyclem7146 Жыл бұрын
Iv always used the flitz and its always been a great finish. Never tried the maroon paste that came with dremal wasn't sure. The green polish i use to dress my leather strop on my knife sharpener and it works amazing for finishing the edges on my knives.
@stuffshop4883 Жыл бұрын
Thanks for taking the time to share your knowledge man. I feel ready to take on my Dremel now. 👍😅
@stlounsbury 4 жыл бұрын
Flitz is the best, I've used it for years. Great video!
@CorneliusCreations 4 жыл бұрын
Thank you!
@altimmons 3 жыл бұрын
Can’t say how much I agree with the lung and eye protection. Learned both the hard way. You totally won’t think you are inhaling anything (I honestly didn’t) but after a few times feeling sick the next day and (and sometimes having black boogers from the stuff caught in my nose) my slow brain made the connection. That’s to say nothing of the potential for long term damage. Eyes - same thing. Especially off brand dremmel tips flying apart or debris I’ve been hit in the eye several times with small pieces (which is unpleasant) and had large pieces go zipping off at 200mph after they get unbalanced and break several times. All it takes is once for that large piece to hit my eye. IM super hard headed but because these are hobbyists tools we tend to think they’re inherently safe. They have serious dangers. Nothing a simple mask and glasses can’t fix. I know that wearing masks is all political now. But my gut tells me that hauking up a black tinged lougie is probably an indication of poor life choices.
@RICDirector Жыл бұрын
Yup. Another 'safe' thing that can darn near kill you is working with mealworms unprotected. I would love to be able to breathe freely and well once again!....
@kellyfoster6983 4 жыл бұрын
thank you. I'm new to dremelling and I had the felt bits and compounds in my kit and had absolutely NO idea what to do with them.
@CorneliusCreations 4 жыл бұрын
Glad the video helped you!
@CorneliusCreations 4 жыл бұрын
Glad the video helped you!
@lllahaahahahaishdhddigehdk830 4 жыл бұрын
Haha me either! So glad I know now! Thank you
@joetroutt7425 4 жыл бұрын
I tried to buff out the scratches on my PlayStation game. Bad idea. Game ruined.
@edcko10 4 жыл бұрын
@@joetroutt7425 Best thing i've tried that works with scratched discs is to wash them with regular toothpaste. Soak the disk apply the toothpaste from the center out. Continue to rinse it off in straight lines from the center to the edge. If that doen't help then the disc might be too scratched.
@alishaygan9844 4 жыл бұрын
Excellent tutorial. Thank you. It did give me the confidence and enthusiasm to get to get my Dremel and Flitz and polish stuff.
@CorneliusCreations 4 жыл бұрын
Hey there! Glad you enjoyed the video!
@passioncommonsenseand8801 2 жыл бұрын
Thank you! Today was a big learning day for me with my new Dremel . Lots of really great tutorials ....
@CorneliusCreations 2 жыл бұрын
That is awesome to hear! I look forward to seeing you around here! I’m happy you are enjoying the tutorials!
@foxtrottango8745 4 жыл бұрын
Your wheel cleaning method is close to how I use to clean a large buffer at my fathers sheet metal shop, we made kitchen equipment for Cruise Ships at the Port of Miami, and hotels and restaurants suck as the Marriott. As mentioned in another comment, changing buffing wheels is needed when you change compounds. Also on large grain surfaces, if the grain is running left to right you hold you buffing wheel parallel to the grain but move the wheel up and down. This polishes without changing the direction of the grain... and don’t over polish because you can actually remove the grain. Keep up the good videos 👍😀👍
@CorneliusCreations 4 жыл бұрын
Fantastic comment!! Great advice!!! Thank you bro!
@EvergreenAcupuncture 4 жыл бұрын
Good explanations! As for safety, never buff on the edge spinning toward you since you (the bottom edge in your video), especially with small pieces like those coins. You should use the top edge that spins away from you, or stand on the side away from it. You might get something thrown into your face!
@CorneliusCreations 4 жыл бұрын
Good advice!
@K-Z1 3 жыл бұрын
Ha... I noticed that too😊
@NeoThirteen Жыл бұрын
Love your channel and tutorials! Very informative. I'm going to try Flitz, I'm sold.
@CorneliusCreations Жыл бұрын
Glad to hear you are enjoying the videos! Flitz is amazing! I own a lot of their products!
@daleh3192 11 ай бұрын
Very impressive. Efficient. Simple. Educational. I await the next tutorial.
@CorneliusCreations 11 ай бұрын
I appreciate your kind words my friend! Thank you for the encouragement.
@lorcro2000 4 жыл бұрын
The Flitz paste is extremely versatile. You can literally use it to polish up car paint, all the metal parts of the car, you can use it to refurbish your yellow/dim headlights (wetsand with fine grit paper, bring them up to clarity again with the Flitz), you can polish fiberglass boats with it, it's just an incredibly useful allround polishing compound. And for slightly larger polishing jobs they sell somewhat expensive but very good viscose "buff balls" with no exposed metal on the end, so you can get into nooks and crannies on vehicles without worrying about scratching stuff.
@CorneliusCreations 4 жыл бұрын
Great info! Thank you!
@archeolobeadscabin1781 4 жыл бұрын
You sure do manage to anticipate my various projects! Always enjoyable to watch you. I'm going to try the flitz on some stones next. Your videos just keep getting better and better.
@CorneliusCreations 4 жыл бұрын
Haha right on man! I think it would work great on the stones. Thank you for the kind words man! I been putting a lot of work in them!
@kerrygibbs8198 4 жыл бұрын
Good information!! Thanks. I got a lot of the felt pads with my Dremel, I will now plan a few polishing projects!
@CorneliusCreations 4 жыл бұрын
Right on!
@donnamealy4877 10 ай бұрын
Thank you! I never knew about being able to clean the felt wheels.
@TheCrafsMan 4 жыл бұрын
Good stuff, my man! I need to incorporate this more into my workflow. Been using lots and lots of sanding sponges and MicroMesh lately, but any time I've gotten really nice polishes, it was with "movable" abrasives like aluminum oxide powder or buffing compounds. Really gets into the details and makes a difference. Has always been worth it, but I always think "Man, I don't want to get all the Dremel stuff out." :D Which makes me think... I need to just KEEP the Dremel out, always on standby. ;) Thank you for what you do!
@CorneliusCreations 4 жыл бұрын
Thank you for your comment CrafsMan! haha yes! I know what you mean! I have to keep all my Dremel's and accessories out because I use them all the time. I been working on my organization since there are so many accessories 😂. I appreciate your kind comment. Thank YOU for what you do CrafsMan! -Matt
@BigHenFor 3 жыл бұрын
Hello! I love your work and your unique presentation. You might even find it useful to set up a little Polishing and Finishing station if you have a Dremel with a hanging loop attached. If you have a suitable electrical outlet, you could hang up your Dremel and use it as a pendant motor - like a Foredom if you get the handpiece and drive train attachment. Hung up it's out the way of your working surfaces, and you can attach your mops to the handpiece to help with the finishing and polishing. It's how jewellers and watchmakers setup their motors because it allows you to work in a relatively small space and have your motor to hand. You can also get stands to hang it up from which either stand on the floor, or can be clamped down on a table edge. Dremel might make these, or you can buy them. Avoid the cheap telescopic ones though as they aren't very strong. Hope this helps.
@CorneliusCreations 3 жыл бұрын
@@BigHenFor Great tip! Thank you!
@kevinobrien2542 2 жыл бұрын
I was literally looking to see if you had a video on dremels and found this
@suzysuzuki8865 2 жыл бұрын
That's what I do. I have three. One with a cut off wheel that I never remove, a battery powered one and another plug in one😂
@AmosAmerica 8 ай бұрын
Thanks for showing these options. The comments here are also great.
@ShannonFord1977 Жыл бұрын
I have come a long long way with my wood art by watching you. Just wanted to say Thank you 🎉
@CorneliusCreations Жыл бұрын
So glad to hear that!!!!
@bigchungus-oj8zz 3 жыл бұрын
I learned something today. I was applying rouge with the tool off, I threw the felt pad away instead of cleaning it, and my rpm’s were too high. Thank you, subd.
@miscme6046 3 жыл бұрын
big chungus just switch the pad out with the shaft so you don't mix the two compounds
@Deamonicus420 2 жыл бұрын
Misc is right. You Never Ever want to mix compounds as there will be variations in mixes. Always change your pads, and if you haven't destroyed them, you can bag them and label them to keep them safe for later.
@aprilrichards7900 4 жыл бұрын
This was really helpful, thank you!
@CorneliusCreations 4 жыл бұрын
Glad you enjoyed it!
@Crossword131 2 жыл бұрын
New watcher, and new sub. You rule. And as someone from California with a southern family, the accent makes me trust you so much more. I love when someone from NASA sounds like they started out with chicken wire and a bad muffler.
@EllisDones-ds9lj 3 ай бұрын
Nicely instructed. I am a first time dremel user and you helped me polish my jewelry
@CorneliusCreations 3 ай бұрын
Great to hear!
@ChonkysWoodshop 3 жыл бұрын
They make small cloth buffing wheels too that work wonders! Less abrasive than the felt ones i find. Great tips!
@Blaze2wild 3 жыл бұрын
Next thing you need is a mask: In 2021: Oh I have one of those
@TheEndOfMadness 3 жыл бұрын
Someone needs a brain polishing.
@Blaze2wild 3 жыл бұрын
@@TheEndOfMadness yessir im dumb as hell
@GOLD_FEVER 2 жыл бұрын
@@Blaze2wild Well done. My props to you.
@BobMuir100 4 жыл бұрын
Very happy with your advice and tips and very timely for me as about to start polishing so can buy with confidence as a lot of kit out there!
@CorneliusCreations 4 жыл бұрын
Glad you enjoyed it!
@hhattingh 2 жыл бұрын
I keep coming back to your channel. You have introduced me to a new obsession. Great stuff. I really hope you get enough reward in return back to make it worth your while in bringing us new stuff. Best wishes
@justinmaynard890 4 жыл бұрын
I use Mothers Mag wheel polishing compound for polishing!! Works great on aluminum
@CorneliusCreations 4 жыл бұрын
I’ve seen that but never tried it! Holler at me man
@snoopu2601 4 жыл бұрын
Oh yeah I bought buffing pads for my hand grinder and buffed out wheels the RPM is pretty high so you have to work quick of moving it. I lock my grinder down to a table and use it as a bench top buffer/grinder . I do have a Dermal tool for small things rarely use the buffing pads.
@Metqa 3 жыл бұрын
I literally have that stuff in my Amazon shopping cart, about to hit BUY, but came looking for just a bit more advice. I'm glad I saw your comment as I will be buffing out and polishing my aluminum pressure pot which I unfortunately let sit with baking soda solution overnight. Totally roughed up and looking to fix it rather than chuck it. I'm getting lots of knowledge from vids and helpful commenters. Cheers and Happy Spring 2021
@noonespecific9463 3 жыл бұрын
@@Metqa , the finest steel wool you can find and Never Dull metal polish, the steel wool can remove scratches and smooths out the surface of the aluminum. Then polish with the Never Dull and wipe and buff with clean cotton rags. That method will give you a shine that you can see a detailed reflection in. When it’s possible to use lots of water on what your polishing Brillo pads instead of plain steel wool works great. Just be sure to rub stuff in the same direction each time when trying to remove scratches, this will save you some elbow grease when you polish with the Never Dull. A tight circular motion when using the Never Dull also. Dremals are fine, but for important things, do it by hand , that dremal spins fast and that little sharp point end on the mandrel can cause terrible scratches with a slip of your hand. I thought you mentioned polishing something important. The steel wool/never dull way has never let me down, so I though I would mention this since your comment was so new. Hope it helps maybe, good luck!
@Metqa 3 жыл бұрын
@@noonespecific9463 thanks a bundle. This sounds like just the details I need to get the job done!
@reddeath6172 4 жыл бұрын
You should never mix compounds on the same wheel as there will always be residual compound that will compromise the finish. Also the green compound and Flitz are both made with chromium oxide and are comparatively similar.
@rajibalam9748 Жыл бұрын
Excellent. Exactly the type of information I was looking for to polish my knife with my Dremel.
@CorneliusCreations Жыл бұрын
Glad you found it helpful!
@davisfay7834 5 ай бұрын
This was a really concise and helpful summary, thanks much!
@CorneliusCreations 5 ай бұрын
Glad it was helpful!
@HepauDK Жыл бұрын
When polishing plastic and aluminium, be careful not to put too much heat into it, as it will melt the surface.
@edparnell3009 4 жыл бұрын
I seem to learn something every time I watch your video, thank you. Where can I buy the dust mask you're wearing?
@CorneliusCreations 4 жыл бұрын
Thank you Ed! I have the links right above the comment section here
@Cencibel1 3 жыл бұрын
Informative, fascinating, fun! Like your energy, Cornelius - thanks!
@CorneliusCreations 3 жыл бұрын
Thank you, Deb! I am glad you enjoyed it!
@HeathersTreasures 4 жыл бұрын
Great video! I've had experience with the products you used. Yes, please do a video on sanding grits and where to get them! I'd love to learn more!
@CorneliusCreations 4 жыл бұрын
I’ll add that to my list!
@TheSmellyArab 4 жыл бұрын
Awesome shine!! I use the green polish on a MDF wheel fixed to a bench grinder to polish up my chisels and get them razor sharp 👌🏼 shhh 🤫 carpenters trick
@AlanSextonVT 4 жыл бұрын
Never thought of that but I bet it works beautifully!
@CorneliusCreations 4 жыл бұрын
Right on!
@TheSmellyArab 4 жыл бұрын
Alan Sexton it’s great, within a minute you can get a chisel sharp enough to shave with, with such little effort to achieve
@RockyMountainBear 4 жыл бұрын
That works so good. One company makes a wheel made of dense particleboard. It is amazing, and is easily the fastest possible option for sharpening.
@Dave-zl2ky 4 жыл бұрын
I always switch buffs when I switch compounds. Nice job though.
@tylersmith9868 3 жыл бұрын
Nobody asked
@Hispoet Ай бұрын
Awesomeeee!! Thank you so much! I am learning how to do all of this with my resin. This video is gold! ❤
@CorneliusCreations Ай бұрын
You are so welcome!
@johnchoi8748 2 жыл бұрын
Thank you so much! I just got a STYLO+ for my birthday and this helps me a lot!
@CorneliusCreations 2 жыл бұрын
Awesome!!!
@zanetwiesman9079 4 жыл бұрын
Wow, that is awesome!! What will you recommend to use when you want to buff resin?
@Doomblade403x 2 жыл бұрын
Yeah i make dice and this would be a dream cure to hand sanding
@CorneliusCreations 4 жыл бұрын
P.S: Best practice is to NOT mix compounds. ⚡︎ Table Vise on Amazon (similar): amzn.to/3cyRbai ⚡︎ Flitz metal polish on Amazon: amzn.to/2LjIc0F ⚡︎ Buffing compound set on Amazon: amzn.to/2Zwkcwk ⚡︎ Dremel polishing kit on Amazon: amzn.to/2MK8hJc ⚡︎ Join this channel to get access to different perks and behind the scenes videos: kzfaq.info/love/7Hi_moNiYG88AgbyiJU9UQjoin ⚡︎ Take my Project Idea Guide Mini-Course here: corneliuscreations.gumroad.com/l/inqzE ⚡︎ Dremel 4000 on Amazon: amzn.to/2HzYTUe ⚡︎ Dust Mask on Amazon amzn.to/3pj7jCy ⚡︎ Fog proof safety glasses on Amazon: amzn.to/2NFVKGm
@Sahadi420 4 жыл бұрын
where do I get the jig that holds the dremel???
@CorneliusCreations 4 жыл бұрын
@@Sahadi420 Here is one similiar ⚡︎ Table Vise on Amazon: amzn.to/2pou8Mg
@CorneliusCreations 4 жыл бұрын
@@azns14 You are welcome!
@DonaldMelton 3 жыл бұрын
do these compounds work with epoxy resin ?
@KirkFields 3 жыл бұрын
I just wanted to share a potential #LifeHack with you, buddy: I bought a few (162 piece) sets of furniture protection pads and bumpers, which I plan to use for buffing - since most of the pads [at least 126 of 'em] are made of felt. I haven't tested them (aka 'em 🤭) out yet, but I just wanted to pass the info on to you. (I got them at two different 99¢ Only Stores, which carry mostly similar items; just an FYI, and to highlight the convenience of picking such items up in different locations). I don't like not being able to pick up stuff that's either discontinued or out of stock (which is common for such stores, because they aren't like traditional retailers that carry a steady stock of the same brand/type of merchandise) like these that so I always plan to avoid this problem. Anyhoot, I'll definitely be back for more of your 'Dremel brain candy.' ☺️ PS -⭐⭐⭐⭐⭐
@IvyPearlMcVay 3 жыл бұрын
Wow! Thank you! I would love to learn more what I can do with my Dremel.
@zsoltkovacs2229 9 ай бұрын
Great summarizing about mini polishing
@CorneliusCreations 9 ай бұрын
Thank you!
@jamesjumpo4324 2 жыл бұрын
Was making a promise ring for my girlfriend and I couldn’t figure out how to polish it. This helped a bunch
@CorneliusCreations 2 жыл бұрын
That is awesome! I know she will love it!
@jamesjumpo4324 2 жыл бұрын
@@CorneliusCreations she did, I today is our 6 month anniversary and I gave it to her yesterday and she absolutely loved it. Thank you for teaching me how to polish it😁
@mclinn5919 4 жыл бұрын
You might have addressed this in another video. Can you use the same for polishing wood?
@David-bc4rh 4 жыл бұрын
I believe you would want something waxy and oily for wood and porous stone.
@NightRider938 Жыл бұрын
I wondered how to attach those. Cool now I know. Thanks for the videos they really help.
@Dave-im8xr 8 ай бұрын
Just found this video as I'm thinking of polishing some aluminium. Excellent video that has given me a lot of help 👍👍
@CorneliusCreations 8 ай бұрын
Glad I could help
@markanthony559 4 жыл бұрын
Hey Matt to answer your question I'm currently working on a carved moon shelf. I'll have to hop onto your Facebook and show you.
@CorneliusCreations 4 жыл бұрын
Right on, I’d love to see it
@thaddeauscaldwell7101 4 жыл бұрын
Thank you for this great informative video . I just bought a Dremel tool and set on eBay but hasn't been delivered yet. I own a 1982 SL380 Mercedes that I'm restoring . I was going to buy all new body and top trim but decided to give a try at polishing them first; since they are straight , with no scratches and dents . Can the " Flitz " compound and the buffers you used , be used on aluminum trim ? Thanks for the tip on safety , compounds and cleaning the buffers too. Best Regards
@CorneliusCreations 4 жыл бұрын
Right on! Yes the Flitz should be able to be used on the aluminum. Also, check out a legit buffing wheel at your local harbor freight or hardware store.
@thaddeauscaldwell7101 4 жыл бұрын
@@CorneliusCreations thank you . I received the Dremel and I purchased some wool pads online like the ones you used in your video . I screwed the dremel in the pad and then applied Fritz. I used the Dremel at 5,000 rpm and after about 30 seconds , the wool pad was turning freely on the mandrel. The pad was no longer locked in place . What are your thoughts on this ? Can I use a mandrel on the pads , similar to the one that is used for 1/2 sanding disks ? Where there's a screw on the end of the mandrel . I bought several hundred wool pads and didn't want to waste money I spent on them . I will go to harbor freight and check out what they have . What would you consider a legit pad ? I appreciate any information you can give me . Thank you again. Best Regards
@RicbeauchampGmail 4 жыл бұрын
Good video. I am new at carving and polishing. You provide solid examples and techniques. Thanks
@CorneliusCreations 4 жыл бұрын
Glad you find them useful!
@snoopu2601 4 жыл бұрын
Thank you for the tips and tricks 👍🏽. I have a Dremal and I have many pads I have never used it and I have 3 diffrent compounds, I think one is for sharpening knives.
@CorneliusCreations 4 жыл бұрын
Glad you enjoyed it!
@robcrtr798 11 ай бұрын
Love your very informative videos. This is a little off track, but if you think you have a RARE coin, do not polish it. It could actually lower it’s value.
Meowtropolis
Рет қаралды 12 МЛН
HIMAWARIちゃんねる
Рет қаралды 11 МЛН
Alexandria Knife Sharpening & Laser Engraving
Рет қаралды 174 М.
Borderline OCD
Рет қаралды 1,2 МЛН