Customer's STIHL FS56 Weed Whacker Is SQUEALING Like Crazy! Can It Be fixed?

Рет қаралды 63,242

Жыл бұрын

Customer's STIHL FS56 Weed Whacker Is SQUEALING Like Crazy! Can It Be fixed?
Don’t forget to click the 🔔 to turn on Video Notifications for more money saving videos and tips, featuring all the brands like Stihl, Husky, Husqvarna, Honda, Echo, Kohler, Tecumseh, Dolmar, Makita, Poulan, Ariens, Powermore, Briggs and Stratton, Champion, Murray, John Deere, Craftsman, MTD, AYP, etc.
Help me make videos or buy me a coffee!!
/ donyboy73
Connect with me on these social media spaces (plus that's where I announce contest winners)
Facebook: / donyboy73-the-small-en...
Twitter: / donyboy73
Instagram: / donyboy73
I have easy to follow and thorough step by step tutorials "do it yourself" (DIY) videos to help you with your broken lawn and garden equipment including snowblowers and zero turn mowers.
I do my best to teach you how to easily diagnose problems the fastest, quickest and most efficient way with real repairs beyond just replacing a spark plug. These tips are for both the homeowner and shop owner.
Whether it be a handheld, two stroke, two cycle engine like a chainsaw, weed eater, weed whacker, string trimmer, grass trimmer, line trimmer, hedge trimmer, strimmer, brush cutter, leaf blower, or four stroke, four cycle units like a lawnmower, wood splitter, lawn tractor, zero turn mower, snowblower, pressure washer, generator or a ride on mower that needs parts installed or replaced, I’m your go-to guy.
My favorite brands of spark plugs are NGK and Champion and are the ones I recommend.
I’ve been a small engine mechanic for many decades and also run my own repair shop so my videos are loaded with tips and tricks that I have learned and want to share with you. You will also find many tool and product reviews from top brands on my channel as well.
I have the largest Small Engine Repair Video Library on KZfaq and the entire internet with over 1200 videos, just GOOGLE "DONYBOY73"!
I want "DON THE SMALL ENGINE DOCTOR" on KZfaq to save you time, frustration and most importantly, MONEY with my HOW-TO videos!
Due to factors beyond the control of DONYBOY73 “The Small Engine Doctor”, it cannot guarantee against unauthorized modifications of this information, or improper use of this information. DONYBOY73 “The Small Engine Doctor” assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. DONYBOY73 “The Small Engine Doctor” recommends safe practices when working with power tools, hand tools, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video. Due to factors beyond the control of DONYBOY73 “The Small Engine Doctor”, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not DONYBOY73 “The Small Engine Doctor".
Tengo tutoriales paso a paso fáciles de seguir y completos, videos de "hágalo usted mismo" (DIY) para ayudarlo con su equipo de jardín y césped roto, incluidos quitanieves y cortadoras de giro cero.
Hago todo lo posible para enseñarle cómo diagnosticar fácilmente problemas de la manera más rápida, rápida y eficiente con reparaciones reales más allá de simplemente reemplazar una bujía. Estos consejos son tanto para el dueño de la casa como para el dueño de la tienda.
Ya sea un motor manual de dos tiempos y dos ciclos como una motosierra, un desmalezador, un desmalezador, una cortadora de hilo, una cortadora de césped, una cortadora de hilo, una cortadora de setos, una podadora, una desbrozadora, un soplador de hojas o unidades de cuatro tiempos y cuatro ciclos como una cortadora de césped, una cortadora de leña, un tractor cortacésped, una cortadora de césped de giro cero, una sopladora de nieve, una lavadora a presión, un generador o una cortadora de césped que necesita que se instalen o reemplacen piezas, soy su persona indicada.
He sido mecánico de motores pequeños durante muchas décadas y también dirijo mi propio taller de reparación, por lo que mis videos están repletos de consejos y trucos que he aprendido y quiero compartir con ustedes. También encontrará muchas revisiones de herramientas y productos de las mejores marcas en mi canal.
#donyboy73 #howto #willitrun

Пікірлер: 240

@donyboy73 Жыл бұрын

➡Watch next; Best Way To Refill A Stihl AutoCut C 5-2 Trimmer Weed Whacker Head kzfaq.info/get/bejne/mLycoZSH3NXLXWw.html

@michaelspencer301 Жыл бұрын

That's the one thing I hate about weed eaters , you virtually have to completely disassemble the whole thing just to get to the problem. And a long enough work bence to work on it. Great video!

@jas350 Жыл бұрын

Not with Ryobi or homelite or weed eater

@SheikShak 10 ай бұрын

The makers made them that way……so that u have to take it to them for repairs……

@RexFixx 10 ай бұрын

@@SheikShaki Just came to say its so easy, I worked on things you need to dissassamble days

@martinkuliza 6 ай бұрын

I disagree... to completely replace the Carburettor is only 2 screws after you open the Air filter enclosure and pull out the air filter with your finger. it's not that hard But even pulling apart the whole thing... Really is not that big of a deal TRYING DOING WHAT I DO.... Repairing TV's and other Electronics EASILY....20 SCREWS BEFORE YOU GET TO THE PROBLEM this is like 5 or 6...........No problem at all

@michaelspencer301 6 ай бұрын

Good to see some people like working on weed eaters. I hate them.

@danielrobert7181 Жыл бұрын

As usual, a video that is thorough, complete, and VERY useful ! Merci Donald !

@snaponjohn100 Жыл бұрын

Great job Dohny. Your close ups are superb! It was easy to tell what you were doing. Thank you for that. That makes it easy to duplicate what you did. Be blessed my friend. John.

@dennisatkins9837 10 ай бұрын

I have that exact machine and it is starting to exhibit that same problem. That was a very well done video. I could easily see exactly what you were doing. Thanks a bunch!

@darkdelta Жыл бұрын

I have this same trimmer, haven't had this problem, yet. Thanks for the tear down instructions.

@ninagamble9150 5 ай бұрын

Cleaning out the clutch drum solved it on several that I’ve worked on. Thanks for the great tutorial!

@jimbrewer2893 Жыл бұрын

Like you, most of us who work trimmers know how sticky build up can affect clutches. Very good video.

@dicklustenhouwer1168 Жыл бұрын

Thanks Donyboy. Just a thought, so many times I've dissembled something thinking I'll remember how to reassemble only to struggle putting something back together. Taking pictures especially of wiring is a big plus. I'm a big fan of your channel.

@walterbeaver6365 Жыл бұрын

Great instructional and informational video. You should teach at a trade school or junior college. You possess the much needed skills required to teach. Love your videos. I always learn something everytime. Thankyou Sir.

@brucekivi Жыл бұрын

Thanks for the video. The in depth look at this problem is enlightening. I’ve had similar issues with various types of equipment, the clutch making racket. I usually just grab some WD40 and spray the clutch and the area around it. I know it may cause slippage for a while, but generally it stops the problem without disassembling the unit. I might try your approach next time. It’s a more careful and seemingly more effective fix. I like how you keep your tools easily accessible and ready for use. I’m usually just grabbing a manual driver without using a drill or impact. Of course, just being a homeowner taking care of my own stuff doesn’t require the efficiency you employ. The biggest issue with gas weed whackers of course is carburetors getting gummed up over the winter. For my purposes around the house I use a Ryobi 18 volt unit and it does fine in my yard. At the cabin I have a Troy Built gas unit which I go to great lengths to keep in good shape. If you have a video of cleaning the carburetor on small weed whackers I’d like to see it. That’s such a common issue. Any suggestions for people to keep them from getting gummed up in the first place? Thanks! Keep up the good work.

@danielviola7534 9 ай бұрын

I love this video. I've now subscribed. I've had issues in the past with line trimmers and haven't a clue on how to fix the issues. I like that you are very thorough and make a point of showing the finer details so that people such as myself can use your videos as a reference. I'm about to purchase a FS 70 R Pro, so hopefully any issues that arise from that in the future, I will be able to manage thanks to you 🙂

@philliphall5198 2 ай бұрын

They don’t put enough grease on the brging most of the time, same with chainsaw 😢

@Nukemann64 Жыл бұрын

initially, when i heard it, I thought it was the recoil doing that. I remember older Briggs flathead engines were famous for doing that squealing nonsense, but, when you diagnosed the clutch it all made sense. I've never seen this issue before, but I'm glad I saw it now! Thank you, Dony for the awesome video! Take care. : )

@ramiroalvarez4699 11 ай бұрын

Just used my weed wacker for the first time and it started doing this Thanks for the video

@davidhume237 Жыл бұрын

Hi Dony. Great to see a new machine on the bench. Thanks for your videos over the years. It has helped me a heap. Keep it up. Dave from Sunshine Coast, Queensland Australia.

@justaviewerortwo2924 13 күн бұрын

My yard boss is doing this and it’s brand new

@bevis226 Жыл бұрын

They are similar to an old Briggs recoil when they start squealing. I usually take a bit of emery cloth to the shaft and lube the hub if the owner does not want to put any new parts into it, but after your lube dries out it will start to squeal again. Best to replace the hub and clutch when they start squealing like that. The squealing sound is the hub trying to gull fast to the shaft.

@stigmartinrnning6751 Жыл бұрын

As usual a great one. I learn a lot from your videos. Now i try to fix my equipment my self instead of taking it to a shop.👍👍

@tomfillmore9710 Жыл бұрын

Good fix buddy and saved the customer from buying parts they didn't need and I am sure you would get that services every shop thanks for sharing the video take care have a great week

@uropecx Күн бұрын

Fantastic video, excellent information and great camera work.

@randi740 7 ай бұрын

Great job Dony, you always do a great job!

@chriswablington7118 Ай бұрын

Thanks for the thorough explanation and great camera work! I just bought a new fs56 and actually returned it for explanation of excessive vibration under throttle. I was told this is normal due to shaft configuration. I kept it and, aside from vibration, it performs great. Based on your feedback, I’m thinking preventative maintenance will go a long way on this machine. Thanks again

@jme36053 Жыл бұрын

Yep. Strimmer clutches are a perennial problem regardless of make. It helps to clean the shaft and re-lube it as well while you’re at it.

@Mike75575 Жыл бұрын

100% always.

@brian436 Жыл бұрын

Took apart a Stihl FS45C and the trigger mechanism came apart. Thanks for showing a detailed viewing of that area. I was going to replace clutch due to head spinning while idling, but cleaning and lubing did the trick. Thanks!

@jameslovitt994 11 ай бұрын

Had the same issue with a FS45 I had, wasn't squealing though. Awesome little trimmer, I'm just too tall for a curved shaft. Sold and replaced it with a FS91R

@mscir Жыл бұрын

Well done, very thorough, thanks.

@stevenebesni2432 Жыл бұрын

Thanks for this video! I have the same exact model, 6 years old. It makes this noise like once a year, just thought it was the plastic vibrating since it goes away with as soon I hit the throttle. Going to check mine out now.

@Francisco-sx7th Жыл бұрын

Great video and clear as usual. I don't have that noise on my trimmer but the head turns when idling so I'm going to clean the clutch as you did and a bit of grease will not harm it neither. Thanks from Belgium.

@richardybanez9052 Жыл бұрын

More Awesome Info.And At 2am. Simply A Master.....Donyboy. Thank You.Richard.

@iowawrench Жыл бұрын

My Stihl KM-55 R I noticed has started to not let the string trimmer attachment stop spinning. Great timing on this video, when I have some time I'll do this clutch cleaning / lube. Thank you for sharing your knowledge!

@HobbyMotorDK Жыл бұрын

Top quality DB73 video - thanks for sharing this issue

@johnlazarte994 9 ай бұрын

I watched alot of videos and only you answer my question. Thank you sir ...

@deanmoore420 Жыл бұрын

Hi, I have the same weedeater and I ran into that issue before basically what I did is the same thing as you just did but I put a brand new clutch on it and I haven’t had any problems with it at all. I probably could’ve cleaned up the clutch like you did, or put another used one on but I chose to put a brand new clutch and great video. Enjoyed watching.👍

@jimeley3304 8 ай бұрын

Nailed it! Good job. Now I know how to fix my FS56C.

@MateuszBPM Жыл бұрын

hi , what a professional hand , is a professional hand . The brushcutter still looks new, but there was clearly not enough grease in the clutch drum. stihl recommends doing such lubrication every year, good job 👍👍👊 greetings .

@josephrich6014 Жыл бұрын

Great video. Thanks for sharing

@chrissmith513 Жыл бұрын

When I used to work at the Golf Course I had plenty of different Machines doing this ! ⛳⛳⛳

@walterbeaver6365 8 ай бұрын

Great informational video. Thankyou Sir.

@markkaplan1949 Жыл бұрын

got that model last year. I didn't realize you can't even lubricate the gear in the spool head. But so far it's been a good unit. Great video sir. Thanks.

@philliphall5198 Жыл бұрын

Drill it yourself and grease it

@philliphall5198 Жыл бұрын

Plus I work on them and other brands, echo will be my next one if I ever buy one

@MARKHOAR-ly1uq 20 күн бұрын

fantastic advice saw another video that gave wrong advice if you live in the UK this one is spot on

@Eric-Goodstuff Жыл бұрын

Perfect timing! i just put on and echo speed feed 400 head on my dad's fs56rc. I tightened it up to much as the plastic spacer was to large and bound up the head. The engine could barely turn it. So i took it apart and figured out the problem but i got that same screeching sound. Must have glazed the clutch? will do what you show. Thanks!

@michaelspencer301 Жыл бұрын

I've also had chainsaws come in with an annoying ping ping an rattling originating from the clutch area. Sometimes during assembly they forget to lubricate the bearing,, that causes the noise. Like the old saying, ( The Squeaky wheel gets the grease ) . A little grease does wonders.

@jonlambshead5115 Жыл бұрын

Hi Don Once Again Another Well Presented ,Informative Video, Well Done. I Fix Whipper Snippers , mowers , Small Motorbikes And Other Small Engines As Well. Watching From Australia. Even Though I do This As A Job As Well, It Is Good To Watch You In Action. You Do An Amazing JOB

@ryszard999 Жыл бұрын

Great video - thank you

@robertmailhos8159 Жыл бұрын

The engagement clutch is not happy with some thing but it is at the right place to get fixed 😊

@bobbelsekwol Жыл бұрын

Another genius vid. Cheers from blighty.

@tonym6920 Жыл бұрын

Great vid as always Dony, have a good weekend! ⚠️⚠️

@donyboy73 Жыл бұрын

you too!

@JohnFrahm0676 Жыл бұрын

Hi Don. Appreciate your videos. Where did you pick up the T27 t handle? Looks padded?

@randgraham1 13 күн бұрын

Thank you!

@andrewsteele7663 Жыл бұрын

Thanks Don, very satisfying, to see the issue and deal with it, with just some elbow grease, that is the cheapest joke I have ever made, Cheers.

@robertyearian227 Жыл бұрын

Mine did sane thing I nought new clutch put on it did same thing then I found out about grease lol. Thanks dony

@aubreychaparral32 Жыл бұрын

That’s funny, I had two of those in two days last summer come in doing that. I believe both of them were bought maybe a week or two before that so brand new. Talked to the head of service for Intermountain Stihl and he was just as surprised. Swapped the clutch drums and they were just fine. Apparently it is a little more common than I had thought.

@johnclarke6647 Жыл бұрын

Two, maybe three, normal things that make it squeal - the drive shaft, the power head and the starter pulley. The first two is because they have not been lubricated. The last is the starter pulley, but it could be the sprocket bearing too. All of these are easily repaired or replaced. On a the sprocket bearing is built into the sprocket. Just like on chainsaws, you have to periodically lubricate the sprocket bearing. I use white lithium grease, like Don. I use Stihl gear grade on the drive shaft and in the power head.

@eddiewilson4291 Жыл бұрын

Mine is doing the same thing. Has since it was about brand new, Now I know what to fix, Big Thanks!

@philliphall5198 2 ай бұрын

It’s so common to have dry brging on them and chainsaws also Need to lubricant once a year or more 😢😢

@joeTM51 Жыл бұрын

This design of clutch riding the clutch without a fan housing and bearing is unique . All that gunmetal bush needs is some lubricant that will remain inside . I mix graphite powder into silicone grease as a lubricant and the intervals between lubrications will be longer. Its not necessary to remove the engine block from its housing. A L shaped T27 can be used to loosen the central screw.

@robcole332 Жыл бұрын

Great video

@marcmyers1465 Жыл бұрын

Nice ! Fast, efficient repair... But yeah, there's some shop time. 🤷🏼‍♂️ I'd have freaked out if that were my trimmer ! 🙀

@SheikShak 10 ай бұрын

Love to watch your videos

@liljoeii6091 Жыл бұрын

Awesome job fixing it like that Does all weed wackers have that hex tip in the middle My pull cord rip right off it's good weed Wacker. And thank you for the video

@ForrestGump1212 11 ай бұрын

dang that trimmer looks brand new!

@beplh5242 10 ай бұрын

It must have been a worn bushing on the centre spindle. I guess the clutch wasnt engaged, but the bushing vibrates enough that it grips the output shaft?

@ChrisR Жыл бұрын

I had an MM55 come in with this exact same failure and a new clutch drum fixed it right up. I have wondered if that brass bush that is retained down inside the bore is an oillite that perhaps just dries out eventually? The new parts seemed to have the same amount of play on the crankshaft as the original parts but the noise was gone.......

@georgedavall9449 Жыл бұрын

Man is amazingggggg! They say, “when someone makes it look easy, when it is not, they know their stuff!” Or something like that? 🤔🙄😀 Great video.

@ataulfolopezlopez8736 Жыл бұрын

Un vídeo interesante como todos los que haces. Yo creo que Sthil no tiene la calidad que tenía hace algunos años atrás, sobre todo en equipos a nivel residencial. Un saludo desde España.

@donyboy73 Жыл бұрын

Si es verdad!

@philliphall5198 Жыл бұрын

I that’s a good time to grease the shaft also

@ecttreker9816 Жыл бұрын

Awesome 👍👍

@badtothebone346 6 күн бұрын

I just purchased one of these almost brand new for $45, I noticed that the trimmer head makes the same noise as in this video. It's kind of a clatters a bit. It's unusual to hear as my Echo srm210 doesn't do this. I thought there was something wrong with it, but I see it's normal. Thanks for the video.

@CivilDefenceCanada Жыл бұрын

Thanks Don! I have the same trimmer that's starting to spin on startup, but not squealing. It needs some carb service so I'll ask the shop to take a look and do a cleanup on the clutch while it's apart. Love your videos!

@Mk-oy9ns Жыл бұрын

Why not repair it yourself..?why watch the videos otherwise.....? The mind boggles.......😂

@CivilDefenceCanada Жыл бұрын

@@Mk-oy9ns Because I lack the space, time, patience and this type of thing does not interest me. The mind boggles.

@astroboy5137 Жыл бұрын

My Stihl service center won’t service the carb, they just replace them. They don’t have the time to mess with them. $125.00 for the carb.

@Mk-oy9ns Жыл бұрын

Yet you watch videos of someone repairing them......😂

@donyboy73 Жыл бұрын

@@astroboy5137 unfortunately if you don't replace it for a customer they will probably be back

@tmurray1972 Жыл бұрын

Good repair video! Mine sounds like the shaft is making a lot of noise, does it need to be greased as well? Have a good weekend.👍🏻

@philliphall5198 Жыл бұрын

Yes

@luuk-out-below9804 Жыл бұрын

Good diagnosis and fix. Kinda sad to see that on what appears to be a newish machine.

@glevideo Жыл бұрын

You are my friend. Thank you. Thank you! I went through all this last night, got the clutch off, smoothed it off with some 600 grit (all I had) then washed it off with some Brake Cleaner and put a little lithium grease on the clutch shaft. Put it all back together this morning (what a chore). This is a Troy Bilt trimmer and it has about 18 screws with many of them different sizes and threads. It takes three different tools to take this apart and put it back together and then I had to try to remember where each screw went. But...Walla...it works, no more squealing and it's all good. Thanks again.

@danielpadgett2831 Жыл бұрын

I have the same trimmer if it ever makes this noise I know what it is thank you dony

@Pete.Ty1 Жыл бұрын

👍👍👍Thank you.

@michaelmcalister1646 Жыл бұрын

My Stihl had done this from the day I purchased it.

@jensenwilliam5434 Жыл бұрын

Interesting. Take pictures of unit. As you take a part. A

@phild5454 5 күн бұрын

13:53 where this screw attaches the hole gets bigger the shaft spins and wears a hole in the blue and black cable 12:06 and the copper inside makes contact with the metal shaft and you get a shock - a rapid one that makes you shout. Wrap some insulation around the blue or black wire and rest assured. No swearing in front of customers. Buy a second hand shaft - if it looks ok.

@khayamahmadi5498 4 ай бұрын

my fs38 has exactly same problem shold i reples the calatch or just same you did

@swvafarmer 13 күн бұрын

Great video but dang what a hassle to fix it, ive had a squealer weedeater for 2 years, i can live with it until it craps out for good. Probably next week

@alainleblanc4031 Жыл бұрын

Excellent video Donyboy, merci! This Stihl looks brand new still and it is already not working properly. Goes to show you that paying a lot more does not mean you are getting something good.

@donyboy73 Жыл бұрын

quality is not what it used to be!

@robertasleson5856 Жыл бұрын

Quality and customer service have been suffering for a while at companies!

@ralphwatten2426 Жыл бұрын

It's the death squeal. Race cars coming down the back chute make that noise sometimes.

@snaponjohn100 Жыл бұрын

I have that same model. The head does not stop spinning unless you touch it on the ground.

@snoopfurlow1275 3 ай бұрын

Adjust the hi speed screw,

@nikolavincek2347 Жыл бұрын

i just add little grease where cable shaft get in clutch drum and it gets where neeed to, its common problem when maschine is washed with water

@roberthamilton9123 Жыл бұрын

hi 👋 Don I never herd noises like this come from a trimmer buddy being as though the trimmer head is turning when at idol I’m gonna say that clutch went bad sir 😀😀 its noise reminds me of a car 🚗 coming to unexpected stop 😀😀

@rolandlewis2356 3 ай бұрын

The FS56 isn't sold with a straight shaft. Is the curved shaft easier for the engine and clutch assembly to operate than a straight shaft ? FS56 is nice and light. I wish it was sold with a longer straight shaft. Thanks for the video.

@christopherraso1990 Жыл бұрын

Wondering where do you purchase that molykote 33 light lithium grease. I take it that it is different from the normal lithium white grease. Thanks and as always you are very impressive with what you do. Your explanations of what you're doing, do's and don't, tip's and trick's. I've learned a lot from you . Outstanding mechanic 👏👏👏👏👍✌️🙃

@donyboy73 Жыл бұрын

check amazon or Brafasco

@johnchuck9573 3 ай бұрын

Don,Did you ever put gas lines on a Husqvarna 122c?

@doncook3584 Жыл бұрын

Have similar machine now know what to listen for as 3 yo machine gets older

@xstreamoneya Жыл бұрын

Hey Donny I’ve been watching your videos for a while. I just seen one from five years ago where you changed the seal on a push mower. I need to replace the seal on a8 hp Briggs & Stratton i\c Engine on a Toro 8-25 rear engine rider. Model number 195787. You said in that video if I lived in Canada you could get the seal for me. I have not been able to find it. Can you help me out? I am hoping I can replace it without removing the motor. Just like you did. Let me know please. Cheers.

@JimsNBHomestead Жыл бұрын

Is the oilite bronze bushing in the drum a serviceable part?

@donyboy73 Жыл бұрын

I don't think so

@Patrick4959 Жыл бұрын

Grouse work Donny mate cheers from Australia 🐨 🐑 🌴 🌏 or the land down under to your area in Canada 🍁 and on the squealing on the clutch drum not to my view at all etc.

@mauricesmith9560 Жыл бұрын

Caught you on the gas pressure knew that was comin l usually never catch you Don 😅

@jimmyamos6259 7 ай бұрын

Mine did the exact same thing. Technician done the same repair. Worked great for a few uses and then started to squeal again. Someone told me the clutch is sticking.

@snoopfurlow1275 3 ай бұрын

Grease the clutch drum,,shaft

@100vg Жыл бұрын

I thought it sounded like a bearing, so I was kinda close. Actually, it sounded like a chicken laying an egg that was twice as big as normal. I'd squawk, too. 😝🤣 Your years of experience makes these things easy to zero in on and that makes life easier for us. Another great one, Don.

@sparky1044 Жыл бұрын

I was thinking the same, sounded exactly like a shop-vac with a bad top bushing. I've replaced the bushings/bearings on the engine shaft and the vacuum still going strong today.

@georgedavall9449 Жыл бұрын

Great comment, so funny !!!!!!!!!!! 👍✌

@mallydan9862 10 күн бұрын

how do u fix the throttle cable

@laxcker Жыл бұрын

I have a fs45 that runs wide open with trigger pulled about halfway but dies if you pull it all the way open. It runs the same way with the spark arrestor taken out. Any ideas ?

@secondcreekworkshop3908 Жыл бұрын

Where did you get that extended T27 bit for your driver? I have been looking for one of those.

@donyboy73 Жыл бұрын

from Wiha, also Irwin has them on Amazon

@b.j.devereux2297 Жыл бұрын

I have save model but older. There is no grease fitting at the trimmer head and I notice it getting VERY hot. Should the shaft be removed and greased?

@donyboy73 Жыл бұрын

it's a sealed unit now unfortunately

@jimmurphy5739 10 ай бұрын

Noticed this unit has the H, L and idle screw adjustments. Folks who are seeing their string heads spin at idle might do a few minutes of YouTubing to figure out how to tune the carb. Bringing the idle speed back down to normal (if it's too high) should stop that. Also, the benefits of tuning the carb are worth the investment in time and effort: snappy response, better handling in different positions, etc. And when you get the knack, it applies to chainsaws and a lot of other small 2-stroke engines too. Good vid! Seemed a bit slow to rev up a bit at the end, but maybe a bit of tuning might have pepped it up before it went back to the customer...?

@garyalensr Жыл бұрын

That's the weird thing, a good buddy of mine just yesterday gave me a weed eater because it was doing the exact same thing. He bought himself a new one and I took the one he gave me apart and cleaned the clutch assembly with brake cleaner. I didn't sand it. But I put it back together and it stopped making that awful sound. After I fixed it, my buddy says... Hey dude maybe I can return my new trimmer and I can have this back? I said ummm no. That's so strange I was having the same noise and you posta video the next day. Great video Donyboy.

@donyboy73 Жыл бұрын

I knew you were having the problem so I made a video!

@garyalensr Жыл бұрын

@@donyboy73See that's why your the best on KZfaq. Thank you for sharing all your knowledge, tips, and tricks. Your the man

@jas350 Жыл бұрын

Lol another problem with this product... Nothing like a Ryobi or homelite product. Never any issues. People pay big bucks for styhl and so many problems. Glad you make so many videos of the many problems with styhl products.