Customize your Q50 headlights: Demon eyes, Etched lenses & Blueghozt PLUS custom animations (PART 3)
Рет қаралды 37,059
Күн бұрынFinally completed the retrofit on the headlights of my Infiniti Q 50. In this video I share the process of installing the blue ghost controller, demon eyes, and etched lenses, and the components and wiring that enable custom welcome & exit animations as well as sequential turn signals!
THIS IS PART 3!!! If you need info on getting the headlights out and disassembling, start at PART 1:
• How to customize Infin...
GLOWE DIY Q50 Headlight Kit - INCLUDES DEMON EYES
squarewheelsauto.com/products...
Etched lenses available on my site too
Buy me a coffee/beer:
www.buymeacoffee.com/squarewh...
Here's the wiring diagram I pulled together:
squarewheelsauto.com/infiniti-...
Whenever I say 'tap a signal,' chances are I'm using one of these:
amzn.to/3F52DJN
Diode Dynamic Demon Eyes Controller:
amzn.to/3wrPHI4
JST Connectors:
amzn.to/3hqCZp2
Chapters:
0:00 - Intro
3:09 - BlueGhozt Overview & Wiring guide
4:55 - Wiring Diagram for the whole project!
8:37 - BlueGhozt Triggers (Engine On, Parking Lights & Turn Signals)
10:45 - Installing Etched Lenses
14:06 - Wiring & Installing Demon Eyes
18:57 - Positioning in car/engine bay
@flyryde 2 жыл бұрын
Dude if builders only knew that them holding so tightly onto their info and experience, instead of sharing it with the world like you’ve done here, is exactly why they’re not growing their brands and making more money. There’s enough business out there for everyone, and same goes for here on KZfaq. Abundance ftw! You did great bro. 👊
@SquareWheelsAuto 2 жыл бұрын
Preciate u man, been watching u for a min!!! 🙏🏽🙏🏽🙏🏽
@remo9310 2 жыл бұрын
yup and still they will get business because alot of ppl arent into diy
@clevewilks4312 Жыл бұрын
@@SquareWheelsAuto Would you know where I could get the information to wire up a set of 2020 infiniti qx80 headlights
@joedirtrd1 Жыл бұрын
@@remo9310 Only if they’re stupid enough to pay $3500 for that bullshit.
@ashifarman766 2 жыл бұрын
Let's get this man to 1k subscribers already so he can get paid for this. Being a content creator is not easy. He put his heart and soul into making and editing this.
@SquareWheelsAuto 2 жыл бұрын
Appreciate u brother! I'ma get there! 🙏🏽🙏🏽🙏🏽
@Que50_Fresco 2 жыл бұрын
💯
@TRICKYBYRD 2 жыл бұрын
Thx for the knowledge and time making these videos bro. Much appreciated. Easy to watch and follow too🙏🏼
@carlosdiaz486 3 жыл бұрын
Great work!! Gives me more confidence in my build!
@fukers2stop 3 жыл бұрын
Thank you very much for taking the time out to make this video for us q50 owners
@syrro698 2 жыл бұрын
Amazing. Purchasing a Q50 next week and I really look up to your channel for inspiration and guidance. Very much appreciated sir
@dangerousaltoids 2 жыл бұрын
Pretty badass!! Getting my Q50 3.0 tomorrow and have been looking for stuff like this, thanks for taking the time out to share your experience and saving us hella time! Subscribed!
@SquareWheelsAuto 2 жыл бұрын
Congrats!!!! And thx for the support! 🙌🏾🙌🏾🙌🏾
@JayColin 3 жыл бұрын
Just earned yourself a new subscriber! Dope content, having a q50 myself made all of this easier. Thank you 🙏🏼
@SquareWheelsAuto 3 жыл бұрын
Thx for the support Jay - glad its helpful!!!
@sarbjitsingh4722 3 жыл бұрын
Very informational. You also helped me installing the subwoofer in my q50rs. Thanks
@SquareWheelsAuto 3 жыл бұрын
Thx for the support! Glad to have helped!
@2xasnice768 3 жыл бұрын
Thanks for the vid. I’m slowly installing the BlueGhozt and projectors on my Silverado and just needed confirmation to clear up some of the wiring. Great vid appreciate the info. 🙏🏾
@SquareWheelsAuto 3 жыл бұрын
oh cool! glad its helpful for my chevy homies too 😎
@MrH17L3R 3 жыл бұрын
I was so scared to cook my lenses or really even start this, but now I feel confident that I can do this mod successfully. Amazing work, I and the community thank you!
@SquareWheelsAuto 3 жыл бұрын
Good luck man and thx for the support! love to hear ppl empowered by this info - y'all got this!!! 💪
@SpeedCultureStudios 2 жыл бұрын
This is a great video! I'm far too impatient for these types of projects, but the lights definitely look awesome! Well done.
@SquareWheelsAuto 2 жыл бұрын
Thanks boss that means a lot coming from u!! Not a terrible weekend project but you nailed it - patience is key!!
@ed_rt 5 ай бұрын
This is Gold man, thanks a lot for all the information, 🙏 as you say no one on earth shares this type of info lol, please keep It up, great video, I just sub
@krashfinatik4396 Жыл бұрын
Thank you so much for this series. Your the first one to give up the secrets to retrofitting headlights that so many of us DIY'ers wanted to know.
@SquareWheelsAuto Жыл бұрын
Appreciate it @KrashFinatik - thanks for watching!!!
@JustnPage 3 жыл бұрын
Perfect timing with this video bro! Planned on tackling this mod this weekend 💯 #Subscribed
@SquareWheelsAuto 3 жыл бұрын
Good luck man - hit me up if u get stuck I'll do my best to help u thru!!
@codecaine5349 Жыл бұрын
This is pretty dope I have custom headlights on my q50 without the demon eyes I always wondered how much went into it and after seeing this man that2k wasn’t that bad I don’t have any of the wires visible no funky controllers hanging around it’s super neat and oem finish all tucked up and away from eye sight
@xAv0iDz 2 жыл бұрын
Appreciate the info ! Sub earned
@greg20423 3 жыл бұрын
Best headlights I’ve seen ever demon eyes looking good
@SquareWheelsAuto 3 жыл бұрын
Thanks! Yeah the demons and etched lenses set it off, I'm happy how it all came out! 😎
@thejamaicansenpai1698 3 жыл бұрын
Yo fam...Loving the look of the car, and loving the detailed DIY. This project I'm going to tackle soon. Hopefully it will be my last exterior mod, which I'm sure it won't be lol
@SquareWheelsAuto 3 жыл бұрын
If I had a nickel for every time I said 'last mod' I could buy more mods!!!
@OJxiii 2 жыл бұрын
Audio quality 👌🏾
@yusunglee6873 Жыл бұрын
dope thank you for the video i saw a good technique a kid used using masking tape and applying the "etch" vinyl like a actual vinyl and didnt have to remove the lense from the base. also gloves are super legit for stuff like this. im so hyped, literally about to go pick up my first q50 in a couple hours.
@SquareWheelsAuto Жыл бұрын
Welcome to the fam!!! 🙌🏾🙌🏾
@yusunglee6873 Жыл бұрын
@@SquareWheelsAuto i could weep im so hyped
@KavlogFreddo365 Жыл бұрын
New subscriber here.. this video is what I needed.. thank you..
@SquareWheelsAuto Жыл бұрын
Glad to be a help!!!
@as5autotv574 3 жыл бұрын
You the goat b! You murdered this!! No one is topping this video even if they are getting “top” while making their video 🙌🏽 🤣🤣🤣 just sayin fam this shit winning! oh, let’s keep with the previous- you on TOP!!
@reiffelmohd8581 2 жыл бұрын
Thanks for sharing.. subscribed ✅
@juvymessii2765 5 ай бұрын
Thank you for this video you broke everything down headlights came out 🔥 🔥 🔥 where can l get the honeycomb sticker for the lens?
@deaedfly 3 жыл бұрын
They look awesome. Reason you can't use one controller for the demon eyes and the halos is because the halos are individually adressable and have a controller inside of each led on the halo. They are also controlled with just 3 wires where as the demon eyes do not have any controllers on board the led so they need one main controller to control them and they use 4 wires usually unless there is a dedicated white led which will be 5 wires. It would be possible to make a controller that can do both but it would be costly and complicated
@SquareWheelsAuto 3 жыл бұрын
Thanks for this intel man!!!! I saw the 3 vs 5 wires difference but didn't realize the addressable LEDs had controllers on board. Another mystery solved🤙🏽🤙🏽🤙🏽
@LayzeLyfe 2 жыл бұрын
I just watched this vid set from start to finish. Great vids! Have you heard of any company making a complete kit yet? 😎👍
@SquareWheelsAuto 2 жыл бұрын
I'm working with Glowe on one!!! 🙌🏾
@redlinemsa Жыл бұрын
Drop in a Morimoto 3" STi-r glass lens on the projector. The OEM ones are plastic. Remove the plastic OEM, cut off the 3 little alignment nubs. The new glass one does not need to be glued back on as the chrome housing will secure the lens in place very well with no glue or brackets needed. Result is a blue cut-off and improved clarity. Worth the extra $60.00 bucks for the lens. I did mine when i smoked out the Cress and amber side reflector.
@SquareWheelsAuto Жыл бұрын
Yep I did mine too when I ripped out all the lightingtrends crap and switched over to Glowe. I'm offering the lens upgrade as an add-on to the etched lens service on my site, I'm just out of stock on the lenses: squarewheelsauto.com/collections/aftermarket-lighting/products/etched-lenses?variant=43153294917840
@youngmarioyoung1 10 ай бұрын
Where can i get the etched lens vinyl to buy?
@Hellamoody Жыл бұрын
The wiring diagram link in the description says "page not found" 😅
@LowkeyLiveLife Жыл бұрын
Any link for that exact driver?
@cristianvillafana4814 Жыл бұрын
Currently running flow series on my q50 headlights do I just plug the blueghozt module onto the power and then the flow series module?
@feta8939 2 жыл бұрын
Hey man great tutorials on the headlight retrofit!! Really appreciate your time with this. I have got everything to do my headlights atm other then the lightingtrendz flow series drl kit which is supposed to be delivered this Thursday. I’m wondering what kind of glue did you use to put the projector lenses back into its housing? Also I didn’t go with a blueghost controller atm. I know all your animations look bad ass but Idk if I wanna mess with all that right now. Do you think it’s worth the extra money and time to do the blueghost as opposed to the Bluetooth controllers from lightingtrends and diode dynamics?
@SquareWheelsAuto 2 жыл бұрын
Thx for watching! Glad to hear you're gonna give it a shot! re: glue - I used permatex super glue (its just what we had in the kitchen drawer lol) - has held up fine so far re: blueghozt - cant go wrong either way, but honestly i wish i would have known about the blueghozt first time round. the animations are a cool bonus but the true power of it is its ability to always be on, and respond to triggers from the car (door open, turn signals, lights on, etc). Also, def consider it if you think you might expand beyond just headlights/DRLs. I didn't plan to, but I ended up adding my LED emblem, DRL turn signals, and underglow - all powered by the blueghozt - its a beast.
@feta8939 2 жыл бұрын
@@SquareWheelsAuto ok cool I’ll check out the blueghostz controller and see if it’s for me. I would like to add an led emblem at some point and I like the switchback drl turn signals on yours so maybe it’s worth buying.
@Og.r23 Ай бұрын
Would the Drl wires be going to pin 2 ? And would they also stay on at night with low beams using pin 2 ?
@petelaurila Жыл бұрын
Are you able to keep the DRL’s on when the headlights turn on? Mine shut off.
@rubbyrodriguez850 2 жыл бұрын
So I traded headlights with someone that had the light trendz kit, and I downloaded the magic led app for it and the controller won’t pop up. The lights drew power and showed it white and then the rainbow. Do you think I have any problems on my End? Or is it a different app that may be used
@brucesmith007 2 жыл бұрын
@SquareWheels Automotive great vid. Have you seen the 8 output ghozt controller?
@SquareWheelsAuto 2 жыл бұрын
I'm pretty sure its the exact same hardware, just with the signal split. I say this because my "4 output" was just the same signal with 2x2 splitters
@mozardtoussaint3714 11 ай бұрын
You could make a company with all this information
@remo9310 2 жыл бұрын
SHOUTS TO U BRO FOR THESE DIY all these damn busters trying to hold it secret so they can charge $800 smh
@Cleggers-Inc 4 ай бұрын
Will this work on q60s as well? I’m probably going to follow this wiring guide but I’m not sure if everything lines up the same.
@SquareWheelsAuto 4 ай бұрын
idk, never been in a set of 60 lights! post up and let us know!
@aceblund3134 Жыл бұрын
so on the ln 1 wire for the blueghozzt controller, if im using that as a 12v switch, what do i connect the converter to?.. confusing straight to the battery?
@SquareWheelsAuto Жыл бұрын
What converter? DM me on IG!
@martyshovs6562 2 жыл бұрын
Hi. Great job, tell me where to buy lens stickers in the form of small hexagons that you glued on the video.
@SquareWheelsAuto 2 жыл бұрын
I had a hookup for these etched lens overlays, but he's no longer offering them. Sorry.
@cambeezytv4850 Жыл бұрын
Will connecting both ring terminal to the positive and negative on the battery instead of a ground run it out faster? My 12v-5v converter came with a very short ground wire
@cambeezytv4850 Жыл бұрын
For the ghozt controller
@SquareWheelsAuto Жыл бұрын
@@cambeezytv4850 dont understand the question here
@Carptyk04 6 ай бұрын
I believe you'll still have parasetic drain though. You need to add a switch.
@mczedsu7013 3 ай бұрын
Could you use a heat gun to open it to? Or does it have to be the oven
@SquareWheelsAuto 3 ай бұрын
Probably a million ways to warm up the sealant, I just know what worked for me 🤘🤓
@vane7701 2 жыл бұрын
can you run flow series and demon eyez at the same time?
@SquareWheelsAuto 2 жыл бұрын
Yep theyre completely independent. The into of this video shows demon eyes on, with flow series DRLs animating 👍🏾👍🏾
@roystervi Жыл бұрын
Hi, do you have a link to the red bar a cross the engine?
@SquareWheelsAuto Жыл бұрын
Don't have a link but it's a Tanabe STB (Strut Tower Bar) for frame rigidity
@keemsmediaVR30 Жыл бұрын
were did you get the frosted
@SquareWheelsAuto Жыл бұрын
I sprayed them with Krylon frosted glass paint while I had them out
@moktarmalik1174 2 жыл бұрын
How many outputs needed for the blueghost, prewired or non?
@SquareWheelsAuto 2 жыл бұрын
I did 4 outputs, prewired, mostly because I didn't know what I was doing or what to expect. If you order prewiring from lightingtrendz, definitely open it up and confirm everything's actually wired; they missed a connection on mine 😤🤬
@thenub9717 2 жыл бұрын
Can I use with my factory leds
@SquareWheelsAuto 2 жыл бұрын
Please elaborate
@raiderzfan0076 Жыл бұрын
Bro I have some stage 3 retro headlights for my Q70 and I dont have a clue. I live in jacksonville Florida
@raiderzfan0076 Жыл бұрын
Is there anyone near jacksonville Florida that can do the install?
@boostedsamuari7436 7 ай бұрын
What’s the link to buy the overlay vinyl for the etching effect on projector?
@SquareWheelsAuto 7 ай бұрын
link in description
@boostedsamuari7436 7 ай бұрын
@@SquareWheelsAuto you only link the kit, I dint see a specific link for over lays
@feta8939 2 жыл бұрын
Hey man after I finished my retrofit, my passenger low beam is burnt out 🤦♂️. From what I’ve researched there is no way to replace the led low beam bulb. For some reason they don’t less a replacement bulb. So I pulled the headlight back out, baked it dissembled everything inside the headlight again. Checked for any loose wires and still no low beam function, Only thing I can figure is I some how damaged the low beam bulb when I was doing my retrofit. So I just ordered a used OEM headlight off eBay for $400. Going to have to bake it and swap over the low beam led housing over to my retrofitted headlight. This simple job turned out to be very expensive. Good thing is after doing the retrofit i can take the headlight out and bake/dissemble it in less 30 mins now 😂
@SquareWheelsAuto 2 жыл бұрын
OMG man sorry to hear it!!! I've baked my headlights 4 times now with no issue, but admittedly have never handled the low beam LED :( Hope this time round works out for ya - mebbe after all this you can open up a retro shop and recoup that $400 😅😎
@feta8939 2 жыл бұрын
@@SquareWheelsAuto lol yessir that’s a great idea!
@feta8939 2 жыл бұрын
@@SquareWheelsAuto sup bro, I figured out the cause of my low beam shorting out. Turns out I broke the wire that connects the low beam to that black box at the bottom of the headlight. So I swapped it out for the new headlight that came in and I’m back in business. Everything works properly again. So now I have an extra full passenger headlight I plan to solder the wire back together and either sell or keep for parts 😂. Can prolly sell it for more than I got it for or buy a matching driver side and start doing Q50 headlight retrofits with core charges. They send me their headlights and I’ll give them the ones I’ve already completed or make theirs custom how they want them. Appreciate all your guides and responses my man. None of this would have been possible without your help! Do you have IG? So I can show you my work
@Hharris009 2 жыл бұрын
I’m curious to know why connect LN1 to 12v switch.
@SquareWheelsAuto 2 жыл бұрын
The DRL (LN2) circuit cuts out when the car turns on. So I have switched 12 going to LN1 to keep the lights on when the engines running 👍🏾👍🏾
@Hharris009 2 жыл бұрын
@@SquareWheelsAuto I see. I noticed that when it’s connected to the 12v switch it keeps the brake witch activated in the app. If that’s the case will the app allow you to change shows. 🤔
@SquareWheelsAuto 2 жыл бұрын
@@Hharris009 yeah in the settings screen you can change LN1 from brake mode to show mode. Either way just set it to display solid white (or whatever you want your drls to run on when the cars on)
@blueblueray2294 2 жыл бұрын
Can you install demon eyes and halo lights on the same channel
@SquareWheelsAuto 2 жыл бұрын
Technically, yes, it'd jus take some fancy wiring. You'd have to run just data to both and figure out how each of them wants to be powered. Keep in mind demon eyes are generally just 1 pixel so it might not come out how you want (it could potentially be off most of the time while an animation is happening)
@blueblueray2294 2 жыл бұрын
@@SquareWheelsAuto thank you
@astroworxofficial5521 Жыл бұрын
Hey brotha, the wires you used for the inputs, were they supposed to come with the blueghozt controller? Or.. I’m genuinely confused 😅
@SquareWheelsAuto Жыл бұрын
Nope usually need to bring your own trigger wires
@juanquessep2506 Жыл бұрын
Hey where can I have the panel that goes behind the projector crystal?
@SquareWheelsAuto Жыл бұрын
You mean the etched lenses overlay? Check my site!
@juanquessep2506 Жыл бұрын
It says sold out bro :(
@ricardojean9009 2 жыл бұрын
Hi, can you assist me with the blueghozt installation. My headlights and my demon eyes are wired directly to my battery, and I wanted to add my headlights, demon lights to the blueghozt.
@SquareWheelsAuto 2 жыл бұрын
hit me on IG I'll send you a rough wiring diagram of how I did mine using a Blueghozt Plus.
@ricardojean9009 2 жыл бұрын
@@SquareWheelsAuto ok. I just did. Thank you
@Elvis_Kunda 2 жыл бұрын
Did you need the 5v or 12v controller?
@SquareWheelsAuto 2 жыл бұрын
Get the controller that matches the voltage of whatever strips you have. For this video I had 5v strips in.
@Elvis_Kunda 2 жыл бұрын
@SquareWheels Automotive I got the same kit from lightningtrendz so I guess it should be the same.
@SquareWheelsAuto 2 жыл бұрын
@@Elvis_Kunda yep lightingtrendz was 5v at the time I made this video.
@xxdp2xx 2 жыл бұрын
only thing is the wiring that leaves the fuse block is protected by a 50 Amp fuse way to large for #14 awg even #12 awg
@SquareWheelsAuto 2 жыл бұрын
hey! tell me more about this! especially if you have recommendations for safer places to get power!
@waltlb 3 жыл бұрын
😂🤣Weird scissoring with no pleasure. Great video!
@SquareWheelsAuto 3 жыл бұрын
😅😅
@thejamaicansenpai1698 3 жыл бұрын
I was on the floor dying
@iftiahmed35 2 жыл бұрын
Bro I bought the q50 custom headlight like yours but I don't know how to wire them do u have the wiring diagram or instructions how wire them please
@SquareWheelsAuto 2 жыл бұрын
Did u watch these videos? I covered wiring in pretty good detail, and provided a wiring diagram. Lmk if I'm missing something?
@iftiahmed35 2 жыл бұрын
I did but still couldn't figure it out
@iftiahmed35 2 жыл бұрын
I got to many wires is there any I can show u my wires
@SquareWheelsAuto 2 жыл бұрын
@@iftiahmed35 hit my IG @squarewheelsauto
@mrlaurobeatz 2 жыл бұрын
Q50 / q60 headlight are same ?
@SquareWheelsAuto 2 жыл бұрын
Nope
@NomadNyne 2 жыл бұрын
Ugh! I hate that I found your channel! Now I have so many more projects for my Q50 RS. My wallet hates you! lol! Great content. Thank you for sharing & keep up the great work.
@SquareWheelsAuto 2 жыл бұрын
Sorry not sorry 🤣😭 Thanks for watching and stay tuned, more wallet challenges coming up!!
@NomadNyne 2 жыл бұрын
@@SquareWheelsAuto DAMNIT!!!! 🤣
@SquareWheelsAuto 2 жыл бұрын
😆😆😆😆😆🤷🏾♂️
@boostedsamuari7436 3 ай бұрын
What pin exactly did u tap for the turn signal. U mentioned parking light pin as 2. Is tht the same pin for turn signals u never specificed HELP
@SquareWheelsAuto 3 ай бұрын
I tapped the actual bumper turn signals
@boostedsamuari7436 3 ай бұрын
@@SquareWheelsAuto do u remember which wire (color) it was? I haven’t taken off my bumper as yet so not sure exactly which wire from the fog light to tap, unless it’s one wire
@joseostorva7235 2 жыл бұрын
Hey broz me again, I'm on day 3 working on the headlights lol. So we FINALLY got everything wired and connected. Only concern is that the demon eyes and the lash (the lights to the right of the demon eyes) does not turn off by itself when the car is on and locked. I have to do it in the app. Is this normal? I'm just worried that one day I forget to turn it off in the app and kills the battery.
@SquareWheelsAuto 2 жыл бұрын
I e got the demon eyes getting power off one of my Blueghozt Plus outputs, set to triggered. So it only turns on when the DRLs are on.
@joseostorva7235 2 жыл бұрын
@@SquareWheelsAuto ahhh there's the problem. I don't have that module. Thank you, will have to be a future purchase cause I'm broke
@SquareWheelsAuto 2 жыл бұрын
U could do a cheap switch or relay off Amazon in the interim! Check out my relay video! That's all the Blueghozt plus is doing anyway
@SquareWheelsAuto 2 жыл бұрын
Also, your demon eyes are still drawing from the battery even after you turn them off in the app. The controller, the Bluetooth, and probably the LEDs themselves all continue doing their jobs of listening for commands. It'd take a while (days between charges, not hours) to drain the battery but still something to keep in mind
@joseostorva7235 2 жыл бұрын
@@SquareWheelsAuto ah ok didn't know that. I daily drive my car so it should be no issue. Definitely will be checking out your relay video!
@youngsuavekiddd1 3 жыл бұрын
Do you always have to go in app to turn these on and off ? Or it turns offs when you turn the car off ? Lastly does the demon eyes shows when in auto mode ?
@SquareWheelsAuto 3 жыл бұрын
Nope, they completely respond to inputs and switched power from the vehicle. Once I've got it configured, I rarely go into the app unless I want to set a show mode.
@SquareWheelsAuto 3 жыл бұрын
The way I have it setup in the video, demon eyes come on when the car is on, and if/when the headlights turn on, the demon eyes cut off.
@youngsuavekiddd1 3 жыл бұрын
@@SquareWheelsAuto okay and what about when you turn the car off do the demon eyes shut off or you have to go in app to shut them off?
@SquareWheelsAuto 3 жыл бұрын
@@youngsuavekiddd1 its all automatic. blueghozt does the shutdown animation, and then everything turns off.
@youngsuavekiddd1 3 жыл бұрын
@@SquareWheelsAuto i have diode dynamics i have to go in app to turn mines off and on that part I really hate. Plus i came to conclusion demon eyes is only for day cause i i can’t see nothing at night
@arellano7103 Жыл бұрын
What brand was the drl or was that oem?
@SquareWheelsAuto Жыл бұрын
Originally lightingtrendz but I've upgraded to Glowe: instagram.com/reel/CilzEnFj67u/
@arellano7103 Жыл бұрын
@@SquareWheelsAuto i went to the website but i only see under glow? Is light trendz bright enough under direct sunlight?
@SquareWheelsAuto Жыл бұрын
@@arellano7103 squarewheelsauto.com/products/rgb-headlight-kit-for-infiniti-q50-glowe-industries I don't recommend lightingtrendz anymore, I've heard/seen enough horror stories.
@arellano7103 Жыл бұрын
@@SquareWheelsAuto thank you so much for the info I really appreciate it 👍
@Only60GamesPlayed 3 жыл бұрын
But this is for your 2015 and NOT for my 2021 Q50 correct?
@SquareWheelsAuto 3 жыл бұрын
Believe the headlights have stayed the same through the entire lineup
@Awsometiger1011 3 жыл бұрын
Ayeee
@juliohedrosa-sigler2440 Жыл бұрын
Lmaoo i wonder how many people almost burned down their house baking their headlights.🤣😭 I did a set of LS430's With dual projectors and switchback halos.. Getting the larger projectors to play with the self-leveling and then sealing it again, hoping nothing would melt inside was a pain!! Came out amazing tho.
@servandovega4132 5 ай бұрын
Props to man.. I'm also looking for DIY it's not rocket science and people are charging over 2000 dollars 😂
@ramirez071910 2 жыл бұрын
All in all how much did you spend?
@SquareWheelsAuto 2 жыл бұрын
How much did *I* spend? Idk lol. a lot went to R&D/trial and error/buying wrong parts, etc. But everything in this video can be done for around $500
@nevergiveup2365 2 жыл бұрын
U never get moisture in your headlights??
@SquareWheelsAuto 2 жыл бұрын
Nope
@nevergiveup2365 2 жыл бұрын
@@SquareWheelsAuto dam why mine doing that I sealed it good too smh
@Mxndo623 2 жыл бұрын
Thought I was in class listening to this 😐
@SquareWheelsAuto 2 жыл бұрын
🆗
@Que50_Fresco 2 жыл бұрын
This is the vid series headlight retro fitters don’t want you to see!
@SquareWheelsAuto 2 жыл бұрын
Poppin the hood so we can all shine 💯
@nickmares5072 Жыл бұрын
Heard your voice and said tell me!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
@SquareWheelsAuto Жыл бұрын
😂😂😂
@gurjotdhaliwal7337 9 ай бұрын
I heard vinyl on lens isn’t proper way and etching is better and more accurate way to do it. I c you used vinyl overlay on lens how did this last?
@SquareWheelsAuto 9 ай бұрын
Going on 3 years on my Q, had vinyl on the lenses of my G for 6yrs before I sold it. If we’re just trying to make semitransparent patterns on our lenses, what does “better and more accurate” actually mean? 🤷🏾♂️
@boostedsamuari7436 7 ай бұрын
@@SquareWheelsAutowhere did u get the cutout vinyl over lay to buy, or print?
@SquareWheelsAuto 7 ай бұрын
@@boostedsamuari7436 squarewheelsauto.com
@nokizzy1753 Жыл бұрын
Wish I wasn’t lazy
@SquareWheelsAuto Жыл бұрын
🤣🤣
@MELKING360 8 ай бұрын
I just paid 1400 for this sheet
@joedirtrd1 Жыл бұрын
Lighting Trendz charges over $3k to do a set of Q50 headlights and that’s if you take out your own lights and ship them off to them. For $3500 they should send you a brand new set with their mods included. Anyone willing to pay these greedy assholes that much is simply insane. 🙄
@SquareWheelsAuto Жыл бұрын
PREACH!
SquareWheels Automotive
Рет қаралды 126 М.
SquareWheels Automotive
Рет қаралды 25 М.
Lilsnoop213
Рет қаралды 73 МЛН