In this video I customize my new 1:18 scale Hot Wheels Ferrari F12 Berlinetta. To buy this car off Amazon, click here: www.amazon.com/gp/product/B00...
Пікірлер: 62
@madgamer5748 жыл бұрын
Very nice, but it would be even nicer if you showed the painting process :)
@Exoticars19Extras8 жыл бұрын
I would but 2 things. 1, I was out of sunlight when I started painting, 2 I thought it was pretty straight forward. I'm no artist so if I could do it, anyone can.
@hybrid87248 жыл бұрын
I did this on my both my F12 & F12 Elite. To remove the rear wheels all you need to do is hold one wheel tightly and start to rotate the other wheel at the same, this will break the glue on the weaker side then keep rotating the wheels in opposites direction and one wheel will drop off and the other wheel will stay on the axle. Then you can slide the axle out, then the brake discs just fall out and you can get at the callipers etc to paint. Then just slide the axle back through to reassemble and push the opposite wheel back on and nothing gets damaged and the wheels all roll perfectly.
@Exoticars19Extras8 жыл бұрын
Ah, makes sense!
@pedroestevesafonso85828 жыл бұрын
Thanks a lot for showing how to do it man! Really appreciate it
@Ezio153528 жыл бұрын
For the yellow stitching, you can use a tooth pick and dip the tip in the paint bit by bit and paint out the yellow stitching. That's how I do it for my Mclaren P1! :D
@Exoticars19Extras8 жыл бұрын
Good idea, next time!
@ImperialDiecast4 жыл бұрын
When you took the car apart, I wish you had shown the inside of the hood roof and the rear hatch. Maybe they had artificially done something to seal them shut and I was wondering if it was possible to break the seals. I once bought a baseline Ferrari FF and the hood was actually held by two screws. If I unscrewed these, I could make the hood open (no engine though) but sadly the hinge mechanism did not work, i.e. the hood would just slide off and hit the windshield rather than having a working hinge. As for the back hatch of the FF, it had hinges just like the elite, but was also held together by additional screws, but when I removed these, the hinge still did not open, so I figured the hatch was soldered to the rest of the car body.
@FestiveProject8 жыл бұрын
Man I love Ferrari
@118carmodels47 жыл бұрын
How have you removed the rear wheels ? I can't arrive
@kharisjones61366 жыл бұрын
You made that harder then what it is. I have that same model you're working on and the elite version also and I took that whole car apart with no problem. I took the seats out and painted them also. That car is easy because it doesn't have much in it like the elite one does. Hot wheels cars are not hard to customize at all.
@utkarshkaushik6178 жыл бұрын
what paints you use
@garedcamarena50658 жыл бұрын
it look cool
@morganeb62447 жыл бұрын
Great video :)
@addictedtothereviewmodelan25995 жыл бұрын
mate i got problem with my ferrari f12 hwe the door is liquid so how can i fix it ?
@jameslenton23516 жыл бұрын
What happens if I do it with the Enzo will it break or survive
@shadowstormtrooper2933 жыл бұрын
I have this car but in a different color which is dark blue
@wajihhamdan52696 жыл бұрын
You are amazing But can you customize a blue bmw m5 2008 from maisto please
@stephenkim26758 жыл бұрын
The F12 is Second favorite Ferrari.
@LegoBuildersMOC8 жыл бұрын
It's still really nice even though it turn out perfectly. Have you thought about adding more lights directly overhead? Some parts of the video are really dark (sometimes because of the angle you hold the car at).
@Exoticars19Extras8 жыл бұрын
I was in a rush to make this video. I literally drove to Houston 5 minutes after recording this. When I get another Bburago to customize I'll make a better video.
@nikolaiiaksenov8 жыл бұрын
You should try and build 1/24 model kits, I know you've built a 1/24 BRZ, but why spend $300 on a diecast when you can get a 1/24 model for $20 with the same amount of details
@Exoticars19Extras8 жыл бұрын
IDK, I personally like 1/18 mostly.
@nikolaiiaksenov8 жыл бұрын
I do too, but i dont want to pay Hundreds of dollars for a prebuild model car that im going to buy that is just going to sit there, i find it fun building model cars for like $20
@diecastcars76768 жыл бұрын
do more customize video's
@daliashalapy87688 жыл бұрын
I have the tuning edition the red racing one
@xxcon2ionsxx4708 жыл бұрын
How did u paint the seats
@Exoticars19Extras8 жыл бұрын
With a paint brush and black paint.
@xxcon2ionsxx4708 жыл бұрын
Thx for the tip
@bimmer.joo346 жыл бұрын
I want to customize my BMW Z3M Burago 1/18 scale
@eedds2228 жыл бұрын
Dude, I hope you reply because I want to know how to take the wheels off without breaking the car.
@Exoticars19Extras8 жыл бұрын
If I knew how, I wouldn't have broken it myself.
@AyaxRo7 жыл бұрын
You have to heat the metal rod so it warms up the glue that holds the wheels to the rod. With the rod being hot it becomes easy to seperate them from the rods. (Have done this to all my elites that I've modded) You can use a lighter just make sure you angle it in such a way that the plastic underbody does not get melted in the process. You could use a soldering iron if you have a high temp one.
@AyaxRo7 жыл бұрын
Heat the metal rod. Loosens the glue and the wheels come off
@JohnDoe-yy5cw8 жыл бұрын
Nice! Is the quality better than "autoart"?
@yolodiyolo34538 жыл бұрын
no, no, no. AutoArt is another level. AA is way better!
@JohnDoe-yy5cw8 жыл бұрын
+Yolodi Yolo :) Is there any more better models than autoart?
@littlecrap82478 жыл бұрын
+Bizzle Music tsm has good cars even with autoart
@amievap788 жыл бұрын
+Bizzle Music cmc and exoto. also acme gmp.
@icespice2337 жыл бұрын
Bizzle Music Schuco, LookSmart, kyosho if the paint isn't fucked up, and BBR made some nice Diecast a while back. I have an Enzo made by them
@utkarshkaushik6178 жыл бұрын
sir how I can enter the giveaway
@utkarshkaushik6178 жыл бұрын
sir if I win the giveaway how I get the prize because I live in india
@dgotkix46098 жыл бұрын
Hey bro do you know where i can get a Maisto 1/18 2016 Camaro SS for a good price
@karlmallen29908 жыл бұрын
Amazon, Costco, or Sams
@dgotkix46098 жыл бұрын
Kidcaraddict Damn out here in lake charles, louisiana we dont have a costco and idk if sams even sales diecast out here and do you have a link to amazon
@karlmallen29908 жыл бұрын
+Donte' C. ill send one just wait
@karlmallen29908 жыл бұрын
+Donte' C. www.amazon.com/gp/product/B00KD3YXS4/ref=as_li_qf_sp_asin_il_tl?ie=UTF8&tag=exoticars19co-20&camp=1789&creative=9325&linkCode=as2&creativeASIN=B00KD3YXS4&linkId=0f2c97b4506c5331ed479ef953d810c3
@karlmallen29908 жыл бұрын
+Donte' C. Or just click the one on the description
@DEVASTATOR4788 жыл бұрын
nice 488 :)
@arthurduquesnoy41447 жыл бұрын
sadly it's a F12
@Blearysword8 жыл бұрын
Whens the giveaway winner going to be announced on this channel for the diablo
@Exoticars19Extras8 жыл бұрын
When I hit 2K subs
@aventador2446 жыл бұрын
+Exotic Diecast lol congrats on 11k subscribers
@utkarshkaushik6178 жыл бұрын
please buy some packets of turbo attax its the cards of sports cars please buy that