MK4 1.8T with GTX3071 tuned with Eurodyne Maestro

Рет қаралды 28,153

Жыл бұрын

We tune this stock engine 1.8T MK4 337 GTI on pump gas. This one is running a GTX3071 and being tuned by Eurodyne Maestro. This turbo combo has great potential and will a lot of fun even on lower boost and pump gas.
Support the channel on Patreon - / comotorsports
Support the channel with CO Merch
CO Motorsports Holographic Sticker 2 Pack - comotorsports.ca/co-motorspor...
CO Motorsports Pullover Hoodie - comotorsports.ca/co-motorspor...
CO Motorsports Zip-Up Hoodie - comotorsports.ca/co-motorspor...
CO Motorsports Shirt - comotorsports.ca/co-motorspor...
CO Motorsports Snap Back Hat - comotorsports.ca/co-motorspor...
CO Motorsports Beanie - comotorsports.ca/co-motorspor...
Tools we use.
Orange Nitrile Gloves
amzn.to/3wFWK2w
Bolt Extractor Set, Easy-Out Screw Extraction
amzn.to/3HvKtE4
Inspection Camera 7” 1080p
amzn.to/3R8PSnL
3M Safety Glasses
amzn.to/3Y1vQ0R
Grinding discs
amzn.to/3H6HzUU
Lincoln Welding Gloves
amzn.to/404S8jQ
TITAN 16138 9-Piece Low Profile Impact Triple Square Bit Socket Set
amzn.to/3XVRIuj
Digital Timing Light
amzn.to/3JkxJBL
Swivel Magnetic Spark Plug Socket
amzn.to/3JbZ4FV
GEARWRENCH 20 Pc. Screwdriver Set
amzn.to/3WDXlMR
Camera Gear
Sony Alpha ZV-E10
amzn.to/3DbAi52
Rode Compact On-Camera Microphone
amzn.to/3kCVudP
67'' Phone Tripod Stand & Selfie
amzn.to/3kxLSks
Audio Video Capture Cards Cam Link Card HDMI
amzn.to/3XOnJoe
Dummy Battery DC Coupler Kit for Sony Alpha A5000 A5100 A6000 A6100 A6300 A6400 A6500
amzn.to/400wyNE
20FT USB-C to USB-C Cable
amzn.to/3inpU2U
25ft HDMI to Micro HDMI
amzn.to/3wvcMwk
Camera Tripod, Mini Flexible Tripod Stand
amzn.to/3H6orXi
Milling
Carbide End Mill 2 Flute Square End Standard 1/4" Diameter x 3/4"
amzn.to/3WDJsy0
Accusize Industrial Tools 1/8'' Thickness 10 Pairs Precision Parallel Sets
amzn.to/3WBUrYL
Precision 123 Blocks, Two Pack
amzn.to/3XEQuUB
Deep Black Apron
amzn.to/3j8Ochx
Accusize Industrial Tools 2-1/2'' Cutting Diameter R8 Shank Indexable End Mill
amzn.to/3XT2KAE
Lathe Turning Tools, Boring Bar Turning Tool Holder with 10pcs CCMT09T304 Inserts
amzn.to/3kCPfql
Tap Magic Cutting Fluid
amzn.to/3HtG6cC
Carbide roughing End Mills, HRC45 Tialn Coated
amzn.to/3Del3Z4
Hold Down Clamp Clamping Set Kit Mill
amzn.to/3XV3vch
Finally by Loxbeats / loxbeats
Creative Commons - Attribution 3.0 Unported - CC BY 3.0
Free Download: bit.ly/FinallyLoxbeats
Music promoted by Audio Library • Finally - Loxbeats (No...
Finally by Loxbeats / loxbeats
Creative Commons - Attribution 3.0 Unported - CC BY 3.0
Free Download: bit.ly/FinallyLoxbeats
Music promoted by Audio Library • Finally - Loxbeats (No...

Пікірлер: 152

@COMotorsports Жыл бұрын

Making more power safely. Thanks everyone for following along.

@COMotorsports Жыл бұрын

@tmscam5115 8 ай бұрын

Is a t04e a good turbo for 1.8t ?

@COMotorsports 8 ай бұрын

@@tmscam5115 there are probably 100s of different T04e framed turbos.

@9ckr716 Жыл бұрын

Dude please never stop doing what you do. Got my AWP Jetta impounded a couple years ago and it really got me down. The MK4s are really something special and its super cool that you make these videos, I get absolutely jacked just hearing some of these rides you work on, it totally inspires me to get another one. My first VW was a VR6 and although theyre a one of a kind, with the options and the tunability with the 1.8s i think ill go with the latter next time around. Cheers.

@COMotorsports Жыл бұрын

Appreciate the comments, thanks

@UngluckInc Жыл бұрын

I would like to add, back in 2008 when I was putting a gt3071r on my car(1984 Jetta GLi with AWP swap) it was hilarious how people said it would never spool and suck, make now usable power, etc. years later the gt3071/gtx3071 are considered, as Dave said, an appropriately sized turbo lol. My how times changes.

@COMotorsports Жыл бұрын

With standalone they're even better when you can control boost exactly as you want. Great turbos street turbo's on these IMO.

@UngluckInc Жыл бұрын

@@COMotorsports fully agreed, why I still run it(though billet comp wheel since 2011) the last 15 years

@luemas2766 Жыл бұрын

Thanks. I love all the 1.8t vids. I can never get enough of it.

@FakeTM Жыл бұрын

great video, giving me some inspiration for what I wanna do down the road.

@dameagerbeaver7703 Жыл бұрын

Thanks, as always guys!

@TheRebuilt1 Жыл бұрын

As a MKIV Golf and B5 A4 owner i really love this and those wheels. I wish these turbos and the 2871 were easily available still. Cheers, chapeau and continued success for all you guys hard work and knowledge sharing.

@COMotorsports Жыл бұрын

Appreciate it, and the turbos are still easily available.

@LaunchBuilt Жыл бұрын

Love the content on the 1.8t keep it alive 👌

@VADER_225 Жыл бұрын

20vt the world!!! Holy cow that is some insane stretch BTW lol

@nicekicksbobby844 Жыл бұрын

Great videos. Thanks for sharing all your knowledge, and this amazing content. I just picked up a (stock) 2004 1.8t Golf GTI that you have inspired me to build :)

@COMotorsports Жыл бұрын

Cool to hear, best of luck with your project.

@carcaineaddicts4820 9 ай бұрын

Would be cool to see some customers reactions/ first drives!

@Eemoneybags Жыл бұрын

Thanks! I love the channel I'm a big old vw mk1 guy swapped all my stuff

@COMotorsports Жыл бұрын

I missed this someone, sorry. Appreciate the support. Side note I'm a MK1 also, hopefully have my mk1 back in the shop later this year...fully mk7r swap going in.

@smittys19daytona 6 ай бұрын

Have the same car , not many left , Running the APR exhaust and software, with a KO4 ,its a blast to drive

@willjames7443 6 ай бұрын

First off been binge watching your KZfaq channel while on std amazing channel by far if I can get a little more on the build bought a stock 04 and has blown turbo and issue with ecu causing a intermittent starting issue so building it and this build is sweet just hoping to get 3 to 320 safely

@livingintruthchurch Жыл бұрын

The Mad Scientist Strikes again, I LOVE IT! MUCH LOVE FROM GRIFFIN, GEORGIA.

@neildantino4709 Жыл бұрын

Sweet! Got same turbo on my built 1.8 making 414hp

@haroldbutler778 Жыл бұрын

Amazing how just changing fuel will make a load more power.

@bryanjenkins7810 Жыл бұрын

Thanks!

@COMotorsports Жыл бұрын

Very much appreciated. XOX

@roystonhughes3278 Жыл бұрын

Another Awesome video contence guys clearly understandable make a safe map on pump fuels personally there's room for more but it's not always chasing numbers but the drivable experience is the key, until next time stay safe and be well 🙏

@COMotorsports Жыл бұрын

I wanted more, boost controller was to sensitive to go safely go further. I think this is only at 4% duty on the controller. lol

@COMotorsports Жыл бұрын

I wanted more, boost controller was to sensitive to go safely go further. I think this is only at 4% duty on the controller. lol

@UngluckInc Жыл бұрын

4 months and it will need a bottom end, no fault of Daves at all. some wheen spin, sudden traction, and that silly tire setup.....doomed. But, once that is done, it will be a super blast to drive. Great content and work as always guys!!!

@JNAMOTORSPORTS 8 ай бұрын

Absolutely not if tuned right a larger turbo saves the stock bottom end

@UngluckInc 8 ай бұрын

you missed the point.@@JNAMOTORSPORTS

@erikfossum3293 8 ай бұрын

I'm trying this same build

@sebastianlorenzo4935 Жыл бұрын

U guys never fail to educate & entertain. I need to take a trip this summer and check out your shop. Do you have any local vw/Audi car shows ?

@COMotorsports Жыл бұрын

We host the largest VW/Audi event on this side of the country. Check out this little recap video from last year. This was the first time back after cov!d so a little smaller turnout then normal, but this year is the 30th anniversary for the event and it should be a great turnout. kzfaq.info/get/bejne/jc6Th9p8sbKqiJs.html

@jettamike2 Жыл бұрын

You can make plenty of power on a 3071, great turbo. Made 596 on a 3071 gen 1 couple years back. Went with a 3582 gen 2 and trying to finish the build, so we’ll see what it does. Keep it up guys.

@COMotorsports Жыл бұрын

596Whp. Impressive, on E I assume?

@jettamike2 Жыл бұрын

@@COMotorsportsI was pretty impressed, on E.

@DustySteel Жыл бұрын

Awesome video!! Thanks for the shoutout!!

@COMotorsports Жыл бұрын

No thank you.

@DustySteel Жыл бұрын

@@COMotorsports what’s the max power you’ve seen with a GTX3071?

@COMotorsports Жыл бұрын

@@DustySteel Unfortunately, no ones ever let me push one. lol I'd say it would make around 600whp tapped out.

@DustySteel Жыл бұрын

@@COMotorsports that’s understandable lol. I need to save for a bit to get a turbo setup from you guys but I’m super excited. Going to get some merch soon too!

@andrewgilman2202 Жыл бұрын

I run a build awp in my mk4 blue lagoon gli with the 3071. 29psi on low boost with 93 and I make over 400 wheel. Things a ripper.

@COMotorsports Жыл бұрын

Yeah we have a blue GLI on our channel that makes over 400 on the same turbo.

@axzwolf5032 4 ай бұрын

Oouuuu I have a 337 it’s so niceeee

@OPFOR109 Жыл бұрын

Would be cool to get some 1st drive/customer reaction clips after you tune these cars.

@COMotorsports Жыл бұрын

Not all people want to be on camera driving like idiots on the street. lol We do them when we can.

@javidgunraj1500 Жыл бұрын

Wish they made eurojet front mounts still

@KevinsgolfR Жыл бұрын

I had a vr6 that looked just like that

@gregprevite8548 Жыл бұрын

Let’s go

@assenmacher Жыл бұрын

hey man out of curiosity what exhaust is on this thing. sounds great!

@JacesOwnWorld Жыл бұрын

I'm tuned through a custom tuner through Eurodyne Maestro. I have been using Eurodyne Maestro with my custom tuner for 4 years now, and have had zero issues. Before this, I was using OTS tunes from Eurodyne, and I had two turbos fail on those OTS tunes. I purchased the Eurodyne software back in 2017, for $700. They did not have the Powertap Air Flash device then, so every time I need to switch tunes, or log, I have to use my laptop. That is the only thing that sucks about this, in comparison to the COBB AP. I have the ability to purchase the Powertap Air Flash device, but it is $250, which kind of sucks, given those who purchase Eurodyne tunes now, get the Powertap Air Flash device free with their tunes, which are cheaper now too. I really think that those of us who have been with Eurodyne long before the flash device was out, should get a discount on it.

@COMotorsports Жыл бұрын

It's the way of technology. Just because you bought a new iphone a month before the newest iphone came out doesn't entitle you to the newest version for free. It's just the way it is, tech constantly changes. However I do understand it sucks sometimes.

@iainmillar1104 Жыл бұрын

Good video. Thanks. Can you explain how you gained control of the timing issue? Was the engine detonating because of the intercooler heat soak?

@COMotorsports Жыл бұрын

It's mostly because of our fuel, however the IC and heat is becoming a problem which will make it worse as ambient temp goes up. As for what specifically the ECU's are different and sometimes it takes a different combination of things to be switched on and off for me to be able to tune it the way I'm most comfortable with. Unfortunately it varies a lot between ECU's even in MK4's so it's not a straight forward answer.

@Mk5rabbit Жыл бұрын

That's a rare bird right there.. what number what it out of the 1500? I might be wrong but I thought they were numbered like the 20ths. It's been awhile since I've seen one.

@ovidiusergio1836 Жыл бұрын

Hi , any 1.9 pd tdi videos? thank you for the great content

@COMotorsports Жыл бұрын

There is not sorry.

@omniambitions6215 Жыл бұрын

Stoked to see a 337 on the channel! Thing looks similar to mine. Jealous of the turbo setup lol. Clean set up just needs rods. Sweet vid very informative thank you. Great numbers for stock block, is this a Gen 2 GTX ?

@COMotorsports Жыл бұрын

Yes, well Pulsar version.

@roybamford8698 Жыл бұрын

Hi love the videos I’ve got a question for you ? Why on the mk5 golf gti vw swapped the pipes to the turbo around ?? The intercooler goes to the turbo fan and air filter to the top ?? Just curious because on most turbo cars they do it the other way like they do on the 1.8t 20v ? Again great video

@4BillC Жыл бұрын

I know I'm not the person you asked but I don't really understand the question. I have a 1.8T Audi but have been around a bunch of 1.8T GTI's as well. Nothing is swapped around as far as the way the turbo, innercooler and charge piping works. But again not sure of the question...

@UngluckInc Жыл бұрын

You are looking at an aftermarket setup vs later platform OEM, and why does it matter? VW did what they did with the reasoning they saw fit. The chassis changed, so the bay is also different in ways. Maybe hit up the mk5 era engineers, as they made the decision. All anyone who wasn't involved in the design can do, is speculate.

@CliffB5A4 Жыл бұрын

Love your work! Im still wondering if the postage section on your website is working properly yet, i want to purchase some shirts in Australia.

@COMotorsports Жыл бұрын

We've been having intermittent email issues that have been plaguing us, some people receive our emails some don't. We believe we've got those issues resolved this weekend by changing servers. We'll reach out to you within the next day or two. Sorry for the delay.

@CliffB5A4 Жыл бұрын

@@COMotorsports excellent thankyou, I replied by email a while back but never heard back. Thanks for the help Dave.

@20thGTI 11 ай бұрын

Never enough 1.8T content! I’ve got a question, will Dave remote tune? No tuners in my area, and I’m running just a standard unitronic BT 630cc tune. Once I built the AEB head for my 20th (already has rods and pistons,) I really want to get a custom tune.

@COMotorsports 11 ай бұрын

Potentially with the right software or ECU. Can't do anything with your current software.

@zuzuebba907 4 ай бұрын

Hellow mate thanks for all of this great videos you are doing for real you maked me started my AEB 1.8T model 2000 original project fastly but in my country they prefer this engine and the mechanics said thats AEB can safely make more power off all the other 20v can you just tell me why and what is the difference? Thank you man appreciate you great job ❤❤

@COMotorsports 4 ай бұрын

I disagree, they're mostly all the same. Some perks between them but nothing major. Watch this video kzfaq.info/get/bejne/fc2AmLahqsClZH0.htmlsi=JDaN80lo1OxwtGfj

@georgefontanez8268 Жыл бұрын

Nice only if you guys could remote tune looking for a e85 blend tune or something like it in florida so fuel is not an issue lol

@UngluckInc Жыл бұрын

Maestro? what fuel? mods list?

@ravenstylea2 Жыл бұрын

The silver GTI owner was stretchin' those tires to stupid levels lmao.

@rafiqdaas3497 Жыл бұрын

Hello nice video guys keep up the good work General question: what is the best 6 speed manual gearbox you could put to a 1.8t 20v engine FWD i heard the 2.8 gearbox is good also heard the seat ibiza diesel 2009 and up gearbox is good Any other additional info tryin to get me a 6 speed box with its stuff around it but dont know what to get HP GOAL IS 400-415 HP Thanks guys

@COMotorsports Жыл бұрын

Most of the 6spds are the same. If I had to choose I'd do one from a mk7.

@Basti-6699 Жыл бұрын

I love your videos, youre doing great work. I have a TT mk1 1.8t auq 180hp with FIC, 3'' downpipe,, silicon intake pipe, K03s what you think is a save hp number for stock block? i want to reach 300 but im scared because of the high mileage almost 190k miles or 300k km. What tipps you have... I want to go with the k04-001 maxpeedingrods and i also have 470cc injectors and 330L/h fuel pump. I really like to hear your tipps :)

@CliffB5A4 Жыл бұрын

It's the torque figures you need to watch not the horsepower, from what I read around the place 350HP is where the torque will be getting you near walking on thin ice. Save your money and don't buy maxspeedingrods parts man, buy quality so you only have to buy it once. With the high mileage engine it would be a good investment to buy some quality rods bearings rings and headstuds to keep it happy for much longer.

@COMotorsports Жыл бұрын

K04's are a waste of time IMO on 1.8ts. And I'd put a bit better rod in it.

@kyleknudsen2131 5 ай бұрын

If you don't mind sharing, what kind of advance do you run on these at say 20psi on a 3071 for 91 octane? I'm considering trying to find a 1.8t a4 quattro and running about this sort of power/setup to start out. As my current never ending project I have a turbo m30 bmw in an e12 that i've done all the tuning myself running 25psi on 91+ octane booster on a 3582. I brought it all the way down to about 8 degrees to not get knock at peak torque with various different setups over the years and this has all been done by ear. I've never dyno'd it but it should be running 400-450whp it spins third at 55mph with 225s, i'll say i'm doing alright considering i haven't scattered it all over the road haha. Driveshafts and wheel hubs are a different story.

@rharrell777 Жыл бұрын

I own a 2002 Turbo S Beetle. I need a "receipe" for 300 wherl H.P. I've been told I can get there with stock rods/pistons. They claimed the stock fuel pump would get there as well. Ill replace whatever is necessary but I see no need for anything past 300. Please give me some input to solve my need for 300 wheel H.P. I wish you were in the states, I'd definitely be using your services. I live in Nashville Tn and normally run Exxon 93 octane in my Bug. Thanks for any input you could share with me. Is any of this information factual? What cc injecter do I need with what turbo do I need to get to 300 wheel H.P.

@rafiqdaas3497 Жыл бұрын

Hello really good video nice car When will you talk about the different turbo setups And what's ideal for 1.8t engines , g25, gtx, k04 turbo chargers and their manifolds Because there is alot of options in the market right now

@COMotorsports Жыл бұрын

K04 are a waste on 18t IMO

@rafiqdaas3497 Жыл бұрын

@@COMotorsports thanks for the reply I meant like also including the other varies turbo chargers and their manifolds you guys said in other video that you were gonna talk about it but never did 😥😅

@COMotorsports Жыл бұрын

@@rafiqdaas3497 it's on this list off videos to do

@nospeedlimits7777 9 ай бұрын

@@COMotorsportsYour answer is a big light in the dark.. golf 6r stands on K04-064.. 270hp at 1.2bar boost. It can be pushed to 310-320hp at 1.4bar boost with 1.8 20v on bigger fuel supply. Just u teach it. A quicker spooler than garrett gt2860rs.. Not first time u say K04 is waiste of time with 1.8T. Can u explain widely cause I'd really like to build fast road 1.8 20v with bigger turbo on stock ecu.. 1000 thanks for your wise reply 🤗

@bylentjahjai8391 Жыл бұрын

Hi , i have a question witch ignition coil’s are better from VW Audi R8 Orginal or NGK Red one’s

@COMotorsports Жыл бұрын

Moot point. Both work fine

@asperf5708 Жыл бұрын

good score , how many KM have the car or the stock engine ?

@COMotorsports Жыл бұрын

Wasn't the original engine I don't believe.

@mikker3729 Жыл бұрын

Diverter or Blow off?

@s1mpl1c1ty7 Жыл бұрын

my 20v mk1 still running stock ko3 turbo, is 1bar or 20psi fine or too much? its just a daily driver not track or race car, ps rev limiter is set to like 6500rpm

@COMotorsports Жыл бұрын

1 bar is 14.5psi...which is totally fine. 20psi that turbo basically running out of steam around there so not much gains after that.

@mattlarson9897 Жыл бұрын

In your opinion, what is the best size turbo for a 1.8T? We all know the little factory turbo is a rocket off the line and huge turbos can make big power but what is the best balance of the two?

@COMotorsports Жыл бұрын

Way too many variables for me to answer honestly. We're going to do a video covering this topic soon.

@mattlarson9897 Жыл бұрын

@@COMotorsports In my experience with my 1.8T i ran the stock turbo, a GT2868, GT2871, and a GT2876. A friend of mine also had a Audi TT with a GT30something. I noticed with my 2868 that it spooled really fast but baked the tires every time that you laid into it but lacked some high RPM power. The 2871 and 2876 make good top end power but it feels like it takes awhile to build boost. The TT took even longer to make boost. My car made 280whp on the 2868, 350whp 320tq with the 2871/76 all at about 20-21psi with a Unitronic GT28 tune, 630cc injectors, and a cast manifold. My friends TT was 420whp. I was just wondering what your ideal street turbo setup would be for the 1.8T. It is not fun burning the tires off with huge low end power but it also sucks waiting for boost to kick in at 4500 RPM. I figured you would have a favorite in between turbo size that is fun on the street but makes respectable power still.

@hellaflushhonda Жыл бұрын

Would you guys be able to do a “setup” list? MAFless? Still have a mass sensor on the inter cooler? N75 valve? Size wastegate? What size injectors you reconmend? Stock fuel rail? I’m wanting a gt30 set up just like this I’ve got a built bottom end awp 20th anniversary GTI

@COMotorsports Жыл бұрын

I mean the video tells a lot. It's clearly mafless, it's on stock fuel rail, it has an aftermarket boost controller so n75 is not used. Injectors are based on what tune you plan on running, or if you plan on running E then you need to size accordingly.

@hellaflushhonda Жыл бұрын

@@COMotorsports thank your for the reply! Still doing research on this I had my motor built and have been looking into different set ups! There’s so many different things people do on these platforms I’m still really new with it!

@livingintruthchurch Жыл бұрын

I have a 87 cabriolet with just a 95 hp 1.8. What budget engine swap would you suggest for a daily driver? I would love to get about 300hp if affordable. thanks

@COMotorsports Жыл бұрын

100% 1.8t in that case. Relatively easy swap, endless support for it, and stock engine can take 300whp.

@diegoalmanac9160 Жыл бұрын

I just got my b6 avant tuned 1000cc injectors holset hx35 only at 25 psi boost how much do you think i can make in 1/4 mille? Any idea just guess on whp in my car no many dynos where i live

@COMotorsports Жыл бұрын

That's a heavy car, I wouldn't expect much for ET honestly.

@sparky5879 Жыл бұрын

Does this setup have a external wastegate? If so what kind.

@COMotorsports Жыл бұрын

Yes, Precision 39mm.

@userpike Жыл бұрын

what change specifically did you make to fix the initial issue?

@COMotorsports Жыл бұрын

Each ECU is different so some require a combination of things to be switched on and off to make things work the way I specifically want to tune it. So not really straight forward answer unfortunately.

@userpike Жыл бұрын

@@COMotorsports I'm familiar with the Bosch me7.x series of ECUs enough to not need Eurodyne. ..just wondering what you changed is all. Thanks. Also wondering what timing was before you were getting corrections for knock. I think you mentioned the fuel being 91 octane up there in Canada. I can get 93 here in FL @ around sea level. ..Kinda wondering what the differences are with that also. like how much timing you had to pull back because of those limitations of fuel and altitude and what you ended up setting it at to finish the dyno sesh. like even show the maps and the changes you make, it would much more interesting to me atleast, if you went into more detail when you are tuning on the dyno and making the vids and all. you're doin alright tho because I still want to watch your vids. I lose focus on boring vids so...

@FaworDrifts Жыл бұрын

I know, that this can be a stupid question :P but are we speaking here about oem garrett gtx3071 or gtx3071 without brand behind? Asking cause a friend of mine is literally right before starting his setup up with "turboworks" gtx3071 and I'm curious can we compare those setups

@COMotorsports Жыл бұрын

We use true Garrett most of the time. This one is a pulsar brand knock off. These are not your typical trash knockoff, we've been having good luck with them however longevity is still in question. Where a true Garrett shines is long-term reliability.

@FaworDrifts Жыл бұрын

@@COMotorsports dope,thx for the answer. I know pulsars, good Australian product. Well known in drifting scene. So we will test how chineese chicken will perform.🙃 Could you say us how much timing it ate safely on 91? I will be tuning ours on european 98 so US 93

@COMotorsports Жыл бұрын

@@FaworDrifts Too many factors to say, every setup is different. We listen to what the dyno and logs tell us for each setup.

@jordancespedes15 10 ай бұрын

@@COMotorsports I been running a pulsar g30 660 for over a year now at 30+ psi not bad turbos for the price

@javidgunraj1500 Жыл бұрын

What front mount is it ebay?

@COMotorsports Жыл бұрын

No idea, but not good and too small.

@pitusmotovlog2187 8 ай бұрын

Guys, what's better for stock displacement 1.8t? Have a dillema between gen2 gtx 3071 and 3076, from pulsar. Do you know what's the rpm difference with spool? Aiming for +/- 500 crank hp :) Greetings!

@COMotorsports 8 ай бұрын

It comes down to what the cars used for, what fuel is being used, if it's fwd or AWD and a handful of other things on what I'd recommend. In short, either turbo is capable of doing it.

@pitusmotovlog2187 8 ай бұрын

@@COMotorsports b6 chassis with quattro, 98 octane fuel. Used for street, weekend toy :)

@TruEGTI Жыл бұрын

What do you think that could do in the 1/4 how it sits?

@COMotorsports Жыл бұрын

With these tires, slow. lol

@TruEGTI Жыл бұрын

@@COMotorsports swap the best tread high 14?

@JNAMOTORSPORTS 8 ай бұрын

Everyone always limits themselves because of fuel

@alexrickard159 Жыл бұрын

Please do a b5/b5.5 1.8t passat, dyno it till it blows up these cars never get the attention they should

@COMotorsports Жыл бұрын

A 1.8t is a 1.8t, chassis is irrelevant.

@Raouldip 7 ай бұрын

fugly tyre wheel combo, but thanks for the vid!

@N037O Жыл бұрын

I assume that with a standalone ECU, troubleshooting the issues and tuning would have taken a fraction of the time. I'm all about using the stock hardware but the 20+ year old tech is showing its age and the BS checksum and flash times of the stock ecu is a time consuming process. I have looked into doing it myself with WINOLS but im turned off by the complexity of the maps and figuring out what does what and having to translate from German to English is just a PITA. I'm definitely going standalone when I'm ready to push for more HP. The initial higher price tag of the standalone will pay for itself when its time to get it properly tuned.

@4BillC Жыл бұрын

I use Eurodyne Maestro to tune my 1.8T A4. It was tricky at first but they made it pretty simple. The maps are pretty well defined, although some are not. I'm by no strech a tuner but I took a mostly stock car and it now runs a bigger turbo, E85 and methanol injection. Never been on a dyno but appears to make about 300whp and torque to match.

@COMotorsports Жыл бұрын

The issue is, what you've learned on one ECU with Maestro can be completely different on the next ECU.

@COMotorsports Жыл бұрын

Yes changes, trouble shooting, boost control and plenty of other things make it the right choice.

@4BillC Жыл бұрын

@@COMotorsports I started with hptuners, it has a huge difference going to Eurodyne!

@user-pw6kk1ix9k Жыл бұрын

Hey just want to know, whats the name of the wheels ?

@COMotorsports Жыл бұрын

Check Rotiforms website

@user-pw6kk1ix9k Жыл бұрын

@@COMotorsports Thanks

@AxionsChannel Жыл бұрын

What fuel pump is he using?

@COMotorsports Жыл бұрын

DW in tank.

@Quesoopadilla 2 ай бұрын

Is the automatics in these cars pretty bad or?

@COMotorsports 2 ай бұрын

Pretty bad yes

@jorgecuevasgallego6393 7 ай бұрын

Que ecu lleva ?

@COMotorsports 7 ай бұрын

Stock

@iosifsimon6940 Жыл бұрын

what rims are those ? 🤍

@COMotorsports Жыл бұрын

Rotiform something or others.

@williamrouse3033 Жыл бұрын

I have an ITS T3T4 50 trim with a .48 hotside that I'm thinking about using it on my stock 1.8t. Roughly how would you think this would perform? I'm thinking it'll spool pretty fast and still support 400whp when really pushed.

@COMotorsports Жыл бұрын

I don't think you're seeing 400whp on that turbo. 300whp is a more realistic goal.

@williamrouse3033 Жыл бұрын

I would be happy with 300whp. I was just saying it could do around 400whp when pushed to 30psi or so on high octane e85 or race gas How do you think the spool would be on this turbo, I was hoping with the .48 it woukd spool pretty quick

@COMotorsports Жыл бұрын

@@williamrouse3033 AR too small IMO.