thank you

MVP

330 Outdoors-Gabe Duvall how much was it and where did u get it from?

khyoon14 It was like $600 from Amazon.

ok thanks. unfortunately i have a 2wd... will it work for me?

khyoon14 Negative

330 Outdoors-Gabe Duvall why not get it directly from RC?

They don’t do that at custom offsets because they’re not getting business that way

Send an email to info@customoffsets.com and they should be able to see what they can do to help you out!

Correct. Just affects the uppers!

@@CustomOffsetsTV thx for the reply

Negligible amount

Hellllllll yesss we do! Shoot us an email sometime fam and we can help you get setup!

Check out the gallery for any fitment questions you have man! You can filter by what you are trying to run! customoffsets.com/gallery

Check here! customoffsets.com/suspension

Any kit over 3" we recommend getting one with a differential drop bracket to avoid the bad CV angles. And this kit would come with more material to help with better angles as well!

Email us at info@customoffsets.com if you are looking to have it installed by us.

The angles were a little steeper than stock, anything over 3" we do recommend getting a kit with a differential drop but the CV angles were still not too bad!

Hemilover By 2 inches lol

actually should measure from the center of the hub/hub cap or from the lip of the rim, tire height can vary based on tire pressure, measure from the rim and you get a true measurement of lift, measure from ground for ground clearance

Kristopher Olson this was probably the dumbest thing I’ve read. If you measured to the hub it’d only show you how much it cam up from the tires. Not the lift. Also ground clearance is measured at the lowest point of the truck which is usually the front diff.

I would guess 3in higher in the front and 1 in the rear. Just a wild guess

Here is the link! bit.ly/2xVxNoW

Custom Offsets Thanks!

Check our gallery out for fitment help - bit.ly/2IdL2S2

Yes you can... stock height this tire will work too

It's in the description.💨💨💨

they do Fine, as long as you're not piss pounding your truck

Lift kits are different then leveling kits Jacque. Leveling kits only do the front, this is a lift kit!

I just got this for my 2018 bighorn it's a 3" lift kit same on the video I'm not shore about the rear spacers they look kinda weak compared to some others I recently looks at Did you change the spacers for this kit please let me no before I install...thanks

So go 2" spacer in the rear I'm using 33x12x50x22 rim and tires

Cooper, please send an email to info@customoffsets.com and they should be able to help you out and decide what needs to be done!

Nope! Be just like factory Johnny

Same

Ray, check our gallery out for fitment help - bit.ly/2DgLW0N

305/55R20 Amp Terrain Attack AT! You can check them out here! www.customwheeloffset.com/buy-wheel-offset2/305-5520AMP+CA3/fuel-assault-18-amp-terrain-attack-at-a-305-55r20

Fuel Assault

i wonder if he licks his fingers when eating,he looks like a finger licker add some fly smash and voila we got one tasty finger

Link is in the description! 🙏🏻

Custom Offsets I see the lift kit but not the wheel and tire package I'm new to trucks and all theses wheel tire combo got me confused

Here is the link! bit.ly/2xVxNoW

Custom Offsets are those tires all terrain? I don't want mud tire

Are those 33's?? Also is it possible to buy this set up but without sticking out so far from t he fenders etc???

From what I've heard they ride pretty rough. The bilstein shocks are what I've had and they ride good.

If you do go with fox get the dsc adjust coilover . i got the race series just nitro charged and yeah theh are bit firm on every day riding but get better at high speeds and offroad

@@mattward330 do you have the 5100’s front and rear with this 3” Kit? I’m considering getting this kit but going with Bilstein for the rear then possibly swapping the fronts in later on.

Heres a link to our gallery of Ram 1500s with 3" lifts and 35s check it out and see what everyone got to fit! www.customwheeloffset.com/wheel-offset-gallery?order=year&make=Ram&model=1500&year=2017&suspension=Suspension%20Lift%203%22&tire_height_from=35

Custom Offsets What’s the offset, rim size, tire size and offset on this? I want to put 20x10x-12 with 5” backspace and 33”x12” tires would that fit this kit without any rub?

Yes it is a good budget friendly option!

Custom Offsets what tires and wheel.combo do you have that don't stick out so far?

Check out the gallery to find the look you like! customoffsets.com/gallery

If there is nothing wrong with them keep them!

Good Layton!

@@CustomOffsetsTV how good????

Shoot us an email to info@customoffsets.com and our sales team can help you out !

Go buy a 4wd poser

Dalton Woods don’t need a 4wd thanks !

evazquez4321 lol 😂 Okaaay tough guy. Who doesn’t need 4wd lol

Dalton Woods nobody is trying to be tough lmao 😂 . I live in the city and there’s no snow here : so yeah . Not really necessary

Fuel Assault 20x10 -18 Amp Terrain Gripper At G 305/55! Check out more of this truck here! bit.ly/2LnLoKV

Custom Offsets did they rub?

Check 'em out here- bit.ly/2gxY8hu

305/55R20

Can the rams run 305/55r20 with a leveling kit?

Yea you can even run up to 35s on a level truck but you won't have any flex at all........can any one can tell me how wide I can go on a stock 20 inch rim?

35s

Sorry you could run 35s

-18 offset! Check out more of this truck here! www.customwheeloffset.com/wheel-offset-gallery/390507/2017-dodge-ram-1500-fuel-assault-rough-country-suspension-lift-3in

Custom Offsets sweet!! i know ill be ordering this kit soon 😎😎

This is with the 3" RC installed with the rear spacer that comes with it.

Aristeidis M 1in leaves the truck with a slight squat

Dylan Striegel I ended up going with ready lift 69-1036 (2.5” front and 1.5” ready) I wanted the ass end to be slightly higher for towing (not that I tow much lol)