Cutting Acrylic with the Cricut Maker

Рет қаралды 283,830

Күн бұрын

This is by far my most requested video! Can the Cricut Maker cut acrylic? The answer is yes but there is a catch! Watch to find out what types of acrylic are best to cut with your machine and what settings to use.
Supplies used:
.007 Acrylic amzn.to/2SMGeZY
.020 Acrylic amzn.to/2LQ7cz8
1 mm Acrylic that DID NOT work amzn.to/315o1K1
Cricut Maker www.thecountrychiccottage.net...
StrongGrip Mat www.thecountrychiccottage.net...
Masking Tape www.thecountrychiccottage.net...
Learning your new Cricut machine:
Free 7 Day Cricut Class www.thecountrychiccottage.net...
Cricut One Hour Crash Course • Cricut for Dummies: Cr...
Cricut Materials Video • Cricut Materials: Whic...
Be sure to follow me on social as well!
Instagram / countrychiccottage
Facebook / countrychiccottage
Cricut Facebook group / cricutlove
TikTok / countrychiccottage
Join our Cricut community on Facebook: / cricutlove

Пікірлер: 367

@ParleysWoodedJourney 3 жыл бұрын

The answer I needed, but not the answer I wanted. Thank you for doing the tests so, I didn't have to.

@sebbossss 2 жыл бұрын

BE CAREFUL, This is not Acrylic. Acrylic is harder and more brittle. This is PETG. I'm selling acrylic and you need a laser cutting machine to cut it. Even the thinnest acrylic won't work on Cricut.

@turalkhan2814 2 ай бұрын

Hello i need your help about laser cutting please help

@jeannierose9 2 жыл бұрын

Excellent video! You get straight to the point and pleasant to listen to. Thank you for doing the legwork on the acryllic trials. Thank you!!

@melsmedia 10 ай бұрын

Angie! I can always count on you for the great and detailed comparisons. Thank you

@MiguelGPraiseGod Жыл бұрын

3 years later and this video is still helping people out (me 😅), thanks a bunch, looking forward to binging your videos and new ones ✌🏾😁

@AngieHolden Жыл бұрын

Glad to help!

@ssfoster95 4 жыл бұрын

Thank you so much. I was watching another video for using the craft plastic to make repositionable stencils and they said you couldn’t do it but I was thinking it would be possible with the knife blade. So excited that it does.

@missvickie1975 3 жыл бұрын

Thank u so much for sharing your Cricut Maker experience with us! You’re the bestest! 💜

@AngieHolden 3 жыл бұрын

Any time!

@Judethedude 3 жыл бұрын

I do not know how anybody could give this video a thumbs down! You saved me so much time researching and googling the answers and although I'm disappointed to find out I cannot cut the 1mm which is the only one my local store carries. I'm so glad you saved me the time and effort of looking so thank you so much for making this video. You have a new subscriber for sure.

@AngieHolden 3 жыл бұрын

Glad you enjoyed it!

@BEAUTYFUL18 2 жыл бұрын

Miserable.they hate happy crafting people.mean while we are happy creating❤

@sebbossss 2 жыл бұрын

Because Cricut cannot cut Acrylic. The thin sheets used in the video are PETG and not PMMA. The 1mm thin sheet is actual acrylic and that's why it's not working.

@religionisapoison2413 Жыл бұрын

@@AngieHolden Laser engravers / cutters use low resolution for cutting wood because wood fibers are spaced apart. acrylic is not. using wood settings on plastic is generally not recommended for any cutting device.

@cameronkennedy7053 2 жыл бұрын

This is awesome! My fiancè has a criqut and I have a 3d printer. I've been building a light bar that needs to use acrylic sheets and have been scoring it manually with an exacto knife and then cracking it into the size I need.. it is a PAIN. She mentioned we should try her Cricut. I can't wait to try this out to cut the exact dimensions I am looking for. Thanks so much!

@AngieHolden 2 жыл бұрын

Happy to help!

@guadalupemullikin6358 4 жыл бұрын

You answered one on my questions thank you for that. So I hope the next video you will be trying the engraving tool and the Debossing tool on Acrylic, would love to make some christmas projects. I already have the new tools. You are a great help, your videos are great. Can't wait for the next one.

@AngieHolden 4 жыл бұрын

Try this one for engraving! kzfaq.info/get/bejne/f7-dZaeo0s6tpI0.html

@hersheyqueenlisa 2 жыл бұрын

I always love your videos! You are so thorough and complete. Thank you for helping me learn.

@AngieHolden 2 жыл бұрын

Glad you like them!

@lauriemartin5450 5 жыл бұрын

Thank you for doing a testing video.. I'm going to add all this info into my notebook for the future. great video.

@A_Just.OK_Gamer 2 жыл бұрын

I successfully cut a 2mm thick piece of acrylic using the knife blade on the "Heavy Chipboard" setting. This cuts 24 times and cut it 3 more times. This scores the acrylic enough to be able to break it apart by hand by placing it on the table with the larger side hanging over the table, holding it down firmly, with the score line right at the table edge and then pushing down. This should make a clean break. Not sure how well this will work on curved pieces, but I had good success with straight lines

@AngieHolden 2 жыл бұрын

I have definitely scored thicker pieces and snapped them but my recommendations are for the thickest it will actually cut through.

@Rachy71 Жыл бұрын

I didn't know that the Maker could cut acrylic. Thank for this information.

@annebenvenuto8264 2 жыл бұрын

Thank you Angie for this. It was on my mind. I tried cutting those dollar tree chopping mats. I used 9 passes and the highest pressure setting with high grip mat. And it would to make a clean cut. Their plastic is not thick but it is very dense. I will definitely give these a try. thanks for all the testing you do and the info you share.

@keneishasingleton5833 2 жыл бұрын

Have you tried using the dollar tree mats as acrylic blank substitutes? I tried but I can’t get it to stick. I’m thinking maybe I should be doing epoxy on both sides and maybe that will seal it. I’m searching everywhere for a solution

@kyliahurley1 2 жыл бұрын

The mats will cut with the deep point blade on the wood Venere setting. Takes like 4 passes sometimes 5

@TEAMRAMPAGE23 5 жыл бұрын

Thank you for this video! Love my Maker

@mostlywildlife 2 жыл бұрын

I have 1 mm, so I am glad I watched your video. I will get the .020. Thanks!

@AngieHolden 2 жыл бұрын

Have fun!

@unburriedtalents599 2 жыл бұрын

Sooooo helpful! Thank you! Bless you!!

@renee1503 2 жыл бұрын

This is so wonderful. Thank you so much. ❤️❤️❤️

@AngieHolden 2 жыл бұрын

Glad you enjoyed it!

@ctconn35 Жыл бұрын

Thank you, you answered all of my questions ❤

@AngieHolden Жыл бұрын

Glad I could help!

@Lilmonster920 Жыл бұрын

omg thank you I am so glad I found this video so I don't waste money and time

@shadowliving6858 4 жыл бұрын

Very helpful. And now off to cut some jigsaw puzzles with 0.020 acrylic.

@agrady313 2 жыл бұрын

This was helpful and exactly the info I was looking for. Thanks!

@AngieHolden 2 жыл бұрын

Glad it was helpful!

@thenar 3 жыл бұрын

Thanks for doing this for us. I appreciate your,time.

@AngieHolden 3 жыл бұрын

My pleasure!

@WendyDewarHughes Жыл бұрын

This is very helpful. Thanks for sharing.

@prempremglamourz1 2 жыл бұрын

Thanks for your reply. This is very handy. 👍🏽

@AngieHolden 2 жыл бұрын

No problem 👍

@vswaddy620 5 жыл бұрын

Thank you for Sharon this video.

@vanyanell5696 2 жыл бұрын

Thank you so much for sharing that!❤️

@AngieHolden 2 жыл бұрын

No problem 😊

@persipina2008 2 жыл бұрын

Exactly what I was looking for

@AngieHolden 2 жыл бұрын

Happy to help!

@CrazyCrafter821 2 жыл бұрын

I'm with another viewer, Idk how 59 people have disliked it! Thank you so much for testing it so I didn't have to. Although, perhaps this should remind me to check your videos out before I buy a new product. I think I got lucky that I went with .020 and didn't even see a .1 option!

@andreinajimenez2073 Жыл бұрын

I think is not for the video itself! Maybe they're disappointed about they fact they can't cut thicker plastic!🤣

@ssharp11 5 жыл бұрын

Great informative video. Thank you. Wishing you a super week. Hugs Susan

@yvonnetucker1416 3 жыл бұрын

I LOVE THIS

@bernadettewohnus8715 3 жыл бұрын

thank you so much for this video!

@AngieHolden 3 жыл бұрын

Glad it was helpful!

@chandratheetge3628 3 жыл бұрын

THANK YOU!

@claudialuis9173 2 жыл бұрын

Thank you for this!!!!

@AngieHolden 2 жыл бұрын

You're so welcome!

@geraldellis1177 4 жыл бұрын

I love this lady she taught me how to use my heat press machine!!!!!!!!!!!!

@venusgirl1526 5 жыл бұрын

Thank you for this video!! I can't wait to try it on my Cricut Maker.

@michellegorsuch7249 3 жыл бұрын

Thank you for this vid - very helpful and a huge help :-)

@AngieHolden 3 жыл бұрын

You're welcome!

@christopherstone6481 3 жыл бұрын

is there any think u have not done, what a page i really love these videos and now im getting so much more use out of my cricut

@ginameredith686 Ай бұрын

THANK YOU

@sarakherallah 4 жыл бұрын

Thanks for testing them out. Do you know if the Explore Air 2 would cut .007 or .020?

@AngieHolden 4 жыл бұрын

I don't think it would but I haven't tried.

@ginetterastaa 4 жыл бұрын

Your videos are the best !!! Do you think I could make a cake topper with that or it is too flimsy?

@AngieHolden 4 жыл бұрын

I definitely think it would work as a cake topper!

@sharitagregory9826 4 жыл бұрын

Very informative. Tfs

@AngieHolden 4 жыл бұрын

Glad it was helpful!

@MrsDevyn3G 3 жыл бұрын

This is great thanks! Which option would you recommend if i wanted to make mini boxes with the acrylic on my cricut? Is the .020 thin enough to allow scoring for the flaps? Or should i go with the .007?

@AngieHolden 3 жыл бұрын

I think I would use .007 or acetate to get cleaner fold lines.

@browngirl8532 2 жыл бұрын

Thank you for the video it’s really needing information 😍 what the thickness good to use for cake toppers TIA

@AngieHolden 2 жыл бұрын

Try this: kzfaq.info/get/bejne/j9qTlM99scWcoIE.html

@jimmyfavereau 4 жыл бұрын

you're awesome :D

@darnaesmith7342 4 жыл бұрын

Love, Love, Love that shirt

@user-ud4qc2tl7k 3 жыл бұрын

Great！

@annemariereyes8197 4 жыл бұрын

Hi I’m new to acrylic. What do you make with these? Wonderful information and great video.

@AngieHolden 4 жыл бұрын

You can cut shapes for like keychains or earrings. I have seen people use them with a light base for nightlights.

@ruthbutler6725 3 жыл бұрын

Hi, Loved the video! Just got done watching the engraving one as well. I have a question...I just found some plastic safety glass at Hobby Lobby that says it is 1.4mm thick. In the video you mention it can cut to 020 thick. Is that milimeters? Do you think my maker might cut, or at least engrave, this? Thank you for your help!

@AngieHolden 3 жыл бұрын

That is about .055 thick. I don't think your Maker will cut that. Sorry!

@nikkisartvideos6412 3 жыл бұрын

Great vid...very informative!!! Based on how I’ve seen people use and cut thicker acrylics and plastics by hand, a lot of times they score it with an X-Acto knife and then break it at the score line to get the shape they want. Have you tried to use the cricket to score the plastic and then cut off any excess with straight edges and then break off the cut pieces from the score lines? I’m not sure if I’m explaining it correctly but I may try it and if it works I will let you know.

@AngieHolden 3 жыл бұрын

I have played with that a bit. I don't have a video because my experiments all failed. I do okay with straight cuts but anything complex and I can't get it to work.

@ArtyMars 2 жыл бұрын

That's what i'm trying to do with cutting panels for small acrylic nano fish tanks! Hopefully i can automate the fiddly part of scoring each panel :D

@pepperminthomecrafts8269 Жыл бұрын

Thank you. New subbie here. Take care

@Joy-mf5vt 3 жыл бұрын

Is the 020 and 007 good for the letter keychains or do I need a thicker acrylic? Thank you for the video!

@AngieHolden 3 жыл бұрын

They would be flexible so I don't know how long they would last on a keychain.

@hannahdemark5228 Жыл бұрын

Hey Angie! I purchased the same exact 020 that you had linked, I’ve done the basswood setting with the included 14 passes with the Knife Blade and I’ve done an additional 14 passes and the vinyl is still not cut through all the way. Any ideas? Thank you and love you videos, you're my go to go cricut questions!

@AngieHolden Жыл бұрын

I know sometimes I have good luck and other times it seems to take FOREVER. I am guessing differences in the material.

@mrsdizi1234 5 ай бұрын

Angie Thank you again for all your wonderful videos. I have a question on the 0.20 can it be engraved on? any help with settings will be greatly appreciated. Thank you

@AngieHolden 5 ай бұрын

Maybe? It is VERY thin so not sure if it will work.

@sillychairbear 3 жыл бұрын

great video thank you for the information! I was wondering what setting would you suggest cutting a .006 Paua shell veneer sheet with? It can cut with an exacto knife or scissors and I would like to try it on the cricut!

@AngieHolden 3 жыл бұрын

Try the wood veneer setting. It sounds similar.

@sillychairbear 3 жыл бұрын

@@AngieHolden Ok! I am going to give it a try and let you know how it works. ^_^ Thank you for your quick response.

@sillychairbear 3 жыл бұрын

@@AngieHolden ... it worked.. however it is very dusty and health wise is not a good idea to cut with the cricut. It was totally worth trying it out though!

@AngieHolden 3 жыл бұрын

Bummer! Totally worth an one time experiment!

@dondoyle111 Ай бұрын

Thank you for your input however just some suggestions - first the material thickness should be expressed as twenty thousandths - not “ oh two oh” next if you need thicker items or stencils simply cut additional ones and stack them together - there are various adhesives that can be used with acrylic.

@AngieHolden Ай бұрын

I actually have a degree in engineering so there is no need to explain that however, most people do not understand twenty thousandths so it is best to put this in a way they can understand for this particular KZfaq channel. I have not found an adhesive I like with clear acrylic as I feel that I can see all of them.

@dondoyle111 Ай бұрын

@@AngieHolden what Engineereng discipline? “IMHO keeping them “dummied down” isn’t the answer. I am finding that ALUMILITE ENVIROSET 5 MINUTE EPOXY GLUE works well with everything I have tried - especially glass. No affialiation with this company

@dondoyle111 Ай бұрын

I’m

@wonderzcraft Жыл бұрын

Thanks for this. Helped me from making a mistake. Can the Maker 3 cut the 1mm acrylic though?

@AngieHolden Жыл бұрын

No it will not be able to.

@tracykosnaski2171 3 жыл бұрын

Hi thx for the video, if you can get 1 mm thick acrylic already cut will the Cricut maker engrave it.?

@AngieHolden 3 жыл бұрын

Yes it will! I have a video on doing that as well!

@DilaraTAN 2 жыл бұрын

Hi Angie, thank you for the video. I am trying to understand is this acrylic sheet is as same as Cricut acetate sheets? Since they have the same thickness of 0.02mm . Or is the acrylic sturdier ?

@AngieHolden 2 жыл бұрын

This is not the same as acetate but thicker.

@viniciusarzon 3 жыл бұрын

Hello there! I need to cut rubber sheets with 1 millimeter, which one would you recommend? I need to cut different shapes that I create myself ...

@AngieHolden 3 жыл бұрын

I am not sure if this machine will cut rubber as I have not tried it.

@rebawright7599 3 жыл бұрын

Good morning, I'm new to the world of Cricut and I'm so green, but I love seeing some of the designs people come up with. Was wondering do you think the Maker could cut something like this attachment

@rebawright7599 3 жыл бұрын

Sorry I couldn't attach the image. Sorry to have bothered you

@AngieHolden 3 жыл бұрын

You can email me if you would like!

@umer936 2 жыл бұрын

For the 1mm, do you think it would work cutting the 20 or so passes from one side, then flipping it over and doing another 20 or so from the other side? That might solve the issues of the cut not going through and not being neat.

@AngieHolden 2 жыл бұрын

You would never get it to line up.

@Sama-qc5sn 3 жыл бұрын

Hello thanks for the vid....i have an explore air 2 what type of acrylic can i cut with that and what setting would i use on the machine?

@AngieHolden 3 жыл бұрын

You won't be able to cut acrylic with it. You can cut acetate but that is much thinner.

@Sama-qc5sn 3 жыл бұрын

Angie Holden ok thank u for your reply x

@nairnfamilymemories4700 2 жыл бұрын

Thanks for this. Would the 0.02 acrylic be thick enough for a cake topper?

@AngieHolden 2 жыл бұрын

Try this: kzfaq.info/get/bejne/j9qTlM99scWcoIE.html

@melindalazar6576 4 жыл бұрын

I may be wrong, but I believe there are multiple basswood settings. Was there one in specific that you have used?

@AngieHolden 4 жыл бұрын

The one for the thickest material available.

@mrLEO.y 4 жыл бұрын

thank for testing, guys, you can cut thick acrylic with laser cutter

@azizaors292 3 жыл бұрын

I'm trying to find a not so expensive laser cutter that I can use at home to cut acrylics. Could you recommend one?

@cpech2 Жыл бұрын

TY that was helpful and what about engraving acrylic??

@AngieHolden Жыл бұрын

Try this: kzfaq.info/get/bejne/fJqRn8udrZjYY40.html

@samanthayang5952 2 жыл бұрын

I'm trying to make a sign for my friend's wedding. Do you think I would be able to cut out calligraphy and small block letter fonts? or more-so just bigger shapes?

@AngieHolden 2 жыл бұрын

You could not be able to cut small things from acrylic.

@janiceredding2349 Жыл бұрын

Angie, I have a Circuit Explore Air 2 machine, I understand that the knife blade you used was only for the Circuit Maker. Do they make a knife blade for the Explore Air 2 machine? I’m wanting to cut acrylic for cake topper. Thank you!

@AngieHolden Жыл бұрын

No they do not.

@FerdyZanotto Жыл бұрын

Amazing video!! Only one more question. I hope you can help me with this. Is it possible to bend (warp) or lightly fold the 0.07 acrylic?

@AngieHolden Жыл бұрын

I think if you heat it you could get it to bend.

@FerdyZanotto Жыл бұрын

@@AngieHolden Maybe if I do any kind of scoring line? ( do you think cricut can do it?)

@AngieHolden Жыл бұрын

It will not score this material I don't think.

@Toojays09 3 жыл бұрын

I bought quilters template plastic to cut a stencil out of (from Jo-ann's), but it doesn't tell me the thickness of it. Should I default to the 2mm chipboard setting since it has high pressure with a ton of passes?

@AngieHolden 3 жыл бұрын

Yea I would. And just watch it. You can pause your machine and check the cut periodically and see if it is cut through.

@aj94sg 5 ай бұрын

Is there a knife blade for the Cricut air or is there some other thing you’d suggest using?

@AngieHolden 5 ай бұрын

No. Only Cricut Maker.

@vickyls8132 2 жыл бұрын

Thanks! What would I want to make out of these thin pieces?

@AngieHolden 2 жыл бұрын

Try this: kzfaq.info/get/bejne/j9qTlM99scWcoIE.html

@TheStationFairy Жыл бұрын

Thank you for this video! Where did u get ur shirt tho?

@AngieHolden Жыл бұрын

I purchased it. They used to be on Amazon but that was many years ago.

@cynthiagilladkinson8440 4 жыл бұрын

Do you know where I can find black 020 acrylic sheets?

@AngieHolden 4 жыл бұрын

I have not cut black acrylic so not sure!

@SpaceMonkeys7 4 жыл бұрын

I bought the exact material for the .020 acrylic you used and used the basswood setting with the knife blade,but it did not cut through at all! Do you have any ideas?

@AngieHolden 4 жыл бұрын

WOW! I have cut it several times with no issues. Maybe go more passes? Your knife blade could be dull so it may take a few more to go through. Once it is done cutting, just press the "C" to do more passes.

@whatscookingworldwide 3 жыл бұрын

i had same issue..

@darylhemsell8331 4 жыл бұрын

Hi, I used to cut styrene plastic also know as plasticard, I make model buses and have upgraded to the maker so I can cut thicker plasticard and engrave it, so far the machine has not got an option to cut and engrave thicker material, any ideas thanks.

@AngieHolden 4 жыл бұрын

You can pick like a basswood setting and start cutting just about anything with the knife blade. There may not be a setting for exactly what you want to cut. Just keep checking to see if it is cut through and remove it when it is done.

@armanime3497 3 жыл бұрын

I’m trying to make acrylic nameplates , using vinyl and the acrylic . What do you suggest ?

@AngieHolden 3 жыл бұрын

You can cut the acrylic or look for signs that are premade or precut and just add vinyl.

@mariadelcampo3315 3 ай бұрын

Can you use UV resin on top of the 0.20 acrylic to make it thicker?

@AngieHolden 3 ай бұрын

Yes you can.

@allisonleeds4485 2 жыл бұрын

What settings do you use for acrylic sheets for sublimation?

@AngieHolden 2 жыл бұрын

I have a video coming up for acrylic sublimation!

@aliciabliss1220 Жыл бұрын

Have you found any of the acrylics with these thicknesses that are extra king that you could do on the 12x24 mat?

@AngieHolden Жыл бұрын

No I haven't.

@kirstynguyll5954 2 жыл бұрын

Hey Angie! Can the Cricut also add printed images onto the sheet? Is this the Cricut maker or the Maker 3? Thank you

@AngieHolden 2 жыл бұрын

You couldn't print onto the surface of the acrylic. You could upload an image and "trace" around it basically with engraving lines. The Maker and Maker 3 will do this.

@kaykay9462 4 жыл бұрын

Can you do this with a Cricut explore one ? I haven’t upgraded yet

@AngieHolden 4 жыл бұрын

No this will not cut on that machine. Sorry!

@melindalazar6576 4 жыл бұрын

Another question so sorry, does the cricut maker cut 1/8 acrylic?

@AngieHolden 4 жыл бұрын

NO 1/8 material will not even fit in the machine.

@foxbear4550 2 жыл бұрын

Hi, sorry, what setting did you recommend to use on 0.20 please? Thanks!!

@AngieHolden 2 жыл бұрын

I usually start with the basswood setting and watch it to see how many passes it takes.

@laurelkhouri7463 3 жыл бұрын

How do get them colored like gold or something? Can you use them to make cake toppers?

@AngieHolden 3 жыл бұрын

I have seen some colored versions out there. And yes they would make great cake toppers!

@lindseygiven5585 3 ай бұрын

Is it possible to get these in golf mirror sheets? I have wanted to cut gold mirror acrylic with my cricut but I can’t find a thin enough sheet.

@AngieHolden 2 ай бұрын

I have not seen any.

@theledbetters4u 3 жыл бұрын

How about using the deep cut blade? Will that cut the thicker acrylic?

@AngieHolden 3 жыл бұрын

No. I am using the deepest blade which is the knife point blade. This is as thick as I was able to cut.

@jollycheeks5271 3 жыл бұрын

Which is a good thickness for acrylic cake toppers?

@AngieHolden 3 жыл бұрын

I would use as thick as possible.

@darlenevenus4398 Жыл бұрын

which one would you recommend more the 0.02 or the .07?

@AngieHolden Жыл бұрын

The thinner you get the more likely you can cut through but it is more flimsy. So it probably depends on the project.

@PaulaYvetteCreates 3 жыл бұрын

Hi Angie, thanks for doing this! Have you tried 5 mil and 10 mil laminate? I just can't get it to cut! I'd appreciate your help. Thanks in advance!

@AngieHolden 3 жыл бұрын

I have cut something similar. What setting are you using?

@Sashaisnotgoingtocrybcofu 3 жыл бұрын

Hi Paula, I use chipboard on mine, hope this helps.

@nicoleriner8480 2 жыл бұрын

Hi! I need some help with troubleshooting! I bought the exact craft plastic (0.020) you used and followed everything you did, but my knife blade isn't cutting all the way through even if I do extra passes. My knife blade is brand new. Please help me figure out what I'm doing wrong!

@AngieHolden 2 жыл бұрын

The settings may have changed since this video is several years old. You may have to pick a different setting on your Cricut.

@cathyzampogna1200 2 жыл бұрын

I tried this today with the acrylic you recommended but I cannot find a basswood setting on my Maker. I’ve seen that setting on other videos but it is not listed in my materials. Any ideas? Thanks for any help!

@AngieHolden 2 жыл бұрын

Are you on computer? It won't be on mobile. Also if you have anything in your design like engraving or writing, it will also not be there.

@meredithszymanski4720 Жыл бұрын

Looking for something gold that’s sturdier than cardstock. Can we do gold acrylic like products? Need some suggestions.

@AngieHolden Жыл бұрын

Can you just make several layers of cardstock to make it sturdier?

@mykaylabelcher7057 3 жыл бұрын

Which one of these acrylics is thicker? I’m wanting to try name keychains and I want the thickest one my maker can cut!

@AngieHolden 3 жыл бұрын

.020 Acrylic is thicker.

@reenabagdai 2 жыл бұрын

Is it possible to make cake toppers from the 020 clear acrylic?

@AngieHolden 2 жыл бұрын

Try this: kzfaq.info/get/bejne/j9qTlM99scWcoIE.html

@darkerthanblackk1 2 жыл бұрын

I am trying to cut thicker acrylic for personalized rings, does anyone have any recommendations for what I should use? Thanks!

@AngieHolden 2 жыл бұрын

Thicker acrylic is going to be a Glowforge as far as I know.

@lindacucinello1885 Жыл бұрын

if you make fonts on the acryclic 020 using the marker within the cricut machine, does it smudge or do you reccomend another tool to write?

@AngieHolden Жыл бұрын

You would have to use a permanent marker then it might work? I have never tried it.

@lindacucinello1885 Жыл бұрын

ok thank you so much!

@jilleenguielmo3322 2 жыл бұрын

Do you think that it would do a good job of engravement on the 1millimeter? lol just asking, i'm soooo new to all of this.

@AngieHolden 2 жыл бұрын

OH yes it would engrave it! I did that here: kzfaq.info/get/bejne/f6qJh82rut-VYmQ.html