The Affordable Micro Shredder for 3D Printing Waste

The Affordable Micro Shredder for 3D Printing Waste - RMRRF2024

Рет қаралды 171,094

Күн бұрын

Check out our CNC Kitchen products at cnckitchen.store/ or at our global resellers www.cnckitchen.com/reseller
I recently visited the Rocky Mountain RepRap Festival 2024 in Loveland, CO to show you some really interesting and new stuff. Let's talk about a new Open Source Electrical Discharge Machining, a Library but for Filaments and a Micro Shredder for Recycling!
Visit Open Sauce 2024 (June 14-16): opensauce.com/
Check out our CNC Kitchen products at cnckitchen.store/ or at our global resellers www.cnckitchen.com/reseller
Rack Robotics (EDM): rackrobo.io/
Filament Library: filamentcolors.xyz/library/
Recreator3D (PET to Filament): recreator3d.com/
Micro Filament Shredder: www.printables.com/model/7381...
💚 Support me 🙏
Patreon: / cnckitchen
Join as a KZfaq member!
Shop at Matterhackers(US): www.matterhackers.com/?aff=7479
Buy a Bambu Lab printer 🐼: geni.us/BambuP1S
Buy a Prusa printer: geni.us/CNCKPrusa
Shop at SliceEngineering: www.sliceengineering.com?p=rJPWEcsm_
Shop at 3DJake(EU): geni.us/zHvnB
PayPal: www.paypal.me/CNCKitchen
🎙Check out my Podcast with Thomas Sanladerer: / @themeltzone
Follow me on Twitter: / cnc_kitchen
Follow me on Instagram: / cnckitchenyt
Chapters
00:00 Introduction
01:49 Rack Robotics EDM
19:16 Filament Color Library
28:46 Micro Plastic Shredder
30:43 Outro
#3Dprinting #RMRRF #diy
FTC Disclaimer: A percentage of sales is made through Affiliate links

Пікірлер: 339

@DantalionNl 14 күн бұрын

can't wait for edm to become the next affordable hobbyist machining technique, I can feel it being around the corner!

@androiduberalles 14 күн бұрын

I already listen to edm all the time ¯\_(ツ)_/¯ /s

@gosonegr 14 күн бұрын

Yeah, machining small car parts is going to be easy as hell

@ldomotorsjason3488 14 күн бұрын

It will be affordable like a 3D printer or desktop CNC. SOON!

@clebbington 13 күн бұрын

@@gosonegrthat's immediately where my brain went as well. could make replacement mounts and gears so easily

@gosonegr 13 күн бұрын

@@clebbington custom gearbox parts, every mechanic nightmare done in the same day and with such low tolerances

@JamieStuff 14 күн бұрын

I'm glad to see the Filament Library using the free access/affiliate link model. I'll be sure to use their links for future purchases, even if I'm buying the same filament I've been buying.

@CNCKitchen 13 күн бұрын

And not enough people know about it.

@f.d.6667 14 күн бұрын

I had access to a professional EDM machine in my last job - the potential uses are endless: chisels for the lathe made from hardened HSS blanks takes minutes, high precision parts from titanium w/o the work hardening, thin-walled jewelry from super-alloys, a complex clamping mechanism that withstands high temperatures? That EDM machine saved us so much time and money!

@barrag3463 14 күн бұрын

Random comment but you should be careful with using superalloys for jewelry; dermatological nickel allergies are a thing and they are not fun. From personal experience even just having Inconel chips on my skin for a couple minutes can cause my skin to get hives.

@f.d.6667 14 күн бұрын

@@barrag3463You are absolutely correct. Nickel is no joke and we were anal with the alloys we picked for our regular products (professional coffee makers). Some of the stuff we made were display things that only had to survive a photo shooting and were then put in storage. The other thing we found out is that some alloys are pretty "hot" in terms of radiation. Some of our suppliers were pretty careless when smelting scrap metal so we had to check all their shipments with radiation meters...

@jungletek 12 күн бұрын

@@f.d.6667 re: "Heat"; that's terrifying! Were these exclusively suppliers from China, or other regions too?

@arthurmoore9488 10 күн бұрын

@@jungletek Note that radiation risk is relative, and depends on the type. If it's alpha, then a simple glaze would work. If it's something else, then dose matters. For example, Uranium glass is safe to keep on a shelf and drink from, but probably not the best for jewelry. Course, that doesn't fly for a commercial product without regulatory approval.

@f.d.6667 2 күн бұрын

@@jungletek China. From what I hear, a lot of the imported leather goods are so radioactive that they get confiscated by customs... there was a wave of cases of radiation sickness in major cities across China last year that can be linked to the burning of contaminated coal from a mine in Northern China. What virtually nobody in the West is aware of, is the fact, that for every kilogram of neodymium (essential for EVs and wind turbines), the same amount of radioactive Uranium and Thorium is dumped in open tailings ponds and then carried as dust across Northern China and India. Cancer rates of 44% are "normal" in the regions where mining/refining of those rare earth elements is taking place...

@masongarten794 14 күн бұрын

Wow. You can really see the passion of these folks. I love seeing them progressively talking faster during the conversation because they are just so excited to get the information out

@zacattack5783 14 күн бұрын

Bro, the filament color library is fucking amazing

@Xamy- 14 күн бұрын

Support it

@trashgarbage7234 9 күн бұрын

Support it! Monetarily, or with filament that's not yet in the inventory!

@megauberduber 6 күн бұрын

Super underrated

@nicocesar 14 күн бұрын

You can't deny the passion of the guys at Rack Robotics to make all this. I really hope they can create a successful company. I ordered the fish tank already

@esteva03 14 күн бұрын

Bro said "This is good for gears" and he just had me right there. I waaaaant it!!!!🤣

@G-EDM 14 күн бұрын

Someone said gears? Two gears for you: kzfaq.info/get/bejne/aq2pltGgsbWrnpc.html

@KillRoy0351 14 күн бұрын

Diy burr grinder for coffee, yes please

@felio_ 13 күн бұрын

Getting closer and closer to the dream of a 3d printer 3d printer

@clebbington 13 күн бұрын

Especially that four axis machine... imagine making gears with angled teeth at home 🫠

@DeanRockne 6 күн бұрын

Makers are going to graduate from 3d printed clocks to home made Rolex knockoffs.

@StanleyKubick1 11 күн бұрын

Huge shoutout to the EDM guys for making it open-source. Bro's just really proud of what they've achieved and excited to share it, and I'm here for it

@button-puncher 13 күн бұрын

EDM is like an ultra precision plasma cutter. I can't wait to see this mature in the maker space.

@dingdingdingdiiiiing 14 күн бұрын

I can't even express how much respect I have for the guys that made that EDM machine. If I'll ever need to machine gears, this would be the way... I'm not sure I _need_ this machine, but I want it.

@shazam6274 14 күн бұрын

These two guys at Rack Robotics EDM know their stuff, inside and out! Very impressive! Looks like a mostly "turn key" unit for practical use will end up ~ $2000 to $4000, which is and absolute bargain! Good luck to them and thanks for the work to get it to "here".

@arthurmoore9488 10 күн бұрын

That's the kind of thing every machine shop is going to want right next to their 3D printer. Massive market for "it just works" while open sourcing everything.

@BuzzKillBillZ 14 күн бұрын

Thanks for showing off the shredder. It was awesome getting to meet and talking with you in person! 😊

@CNCKitchen 13 күн бұрын

Likewise! Thanks for your dedication.

@kenmagalnik6596 14 күн бұрын

With professional wire machines, the use cases tend to be: Since there is no tool to part contact, they are incredibly accurate. If something needs to be spot on, wire it. 2. It cuts anything conductive, without care for how hard it is. It will cut hardened steel. 3. It can cut an almost square inside corner (limited by the wire diameter which is very small). These 3 combine to make wire machines the primary method for making stamping tools

@gogota_ 13 күн бұрын

Not even diamater but radius :)

@AllSeeingEy3 10 күн бұрын

Next year's innovation: radius-only wires, now with 100% less diameter! improve accuracy by only using the part of the wire you need!

@judlex7300 10 күн бұрын

What if square wires were made, would that make a perfect inside square corner

@gogota_ 10 күн бұрын

@@judlex7300 That would be sick at one point but there are other options. On corner wire edm stops for short period of time to machine corner. Or you can use smaller diameter of wire to make even smaller radius. For that kind od WEDM we use 0.1mm wire instead of standard 0.25 or 0.3mm 😎

@kenmagalnik6596 10 күн бұрын

@@judlex7300 almost, but no. You need a bit of space between the wire and the metal you are cutting, for where the spark jumps and where the water washes out the burned metal. It's about half the wire diameter. So with a square wire you'd get a radius of about half the wire diameter rather than the whole diameter. Also, I suspect it won't be an arc, but rather some kind of parabolic who knows what shape. A lot of machines are made to run multiple wire diameters. 0.010 for most cuts, plus .002 for the super fine stuff. But really, .01 inside radius is pretty damn small, and you can usually just deal with that.

@AzaB2C 14 күн бұрын

The EDM machine with the nano light saber demo was awesome to see in person.

@bigb0r3 14 күн бұрын

Home mini open source EDM! Thanks! Didn't know. Mini machinist holy grail.

@chunqk 14 күн бұрын

List of things to further DIY for EDM: A controller to handle all of the below. Flushing! Pumps, nozzles, variable water pressure, high and low flushing conditions. Deionizing filter, industry standard is glass beads in a bottle that can be recharged. Water resistivity sense, so that the DI filter doesn't make the water too clean. Water level sense, so the work tank can cycle water by itself. Paper filters, to clean out the larger chips. Wire sensor touch, auto wire threading, and water chilling are probably out of reach. Not a bad deal if you can't buy something like the Sodick VN400Q.

@SolarMillUSA 12 күн бұрын

Water chilling doesn’t sound too unapproachable. You can get refrigerated units for laser cutters and Tig welders for relatively cheap. If for some reason the metallic sides and parts too many ions into the water, then I could imagine an open source solution with a plastic coil submerged in a refrigerated heat exchange fluid being a good community project.

@jimbarchuk 5 күн бұрын

There are '6 pack fridges' for $50.

@thomasrogers8239 14 күн бұрын

I was really interested in the EDM Kickstarter they did, I'm glad to know I can still buy the stuff off their website

@stelioskoroneos3872 14 күн бұрын

Its so refreshing to see people so positively "hooked" in the things they do

@HenryKlausEsq. 9 күн бұрын

So many enthusiastic young engineers, programmers and designers. Can't help but feel encouraged by these fine people.

@Palte 10 күн бұрын

The color library and the website are insane work! Absolutely love the enthusiasm and love the project!

@johnr8856 14 күн бұрын

The hobby EDM is exciting. The ability to accurately make small custom gears and metal housings is a game changer.

@ummthingy 14 күн бұрын

EDM is amazing. I program EDM professionally. The limits are endless.

@gogota_ 13 күн бұрын

Same here :) im working on FANUC and Agie charmilles EDM machines :)

@dimitar4y 14 күн бұрын

wire edm = gears, fine detail, watch gears, micro pcbs, tooling for lathes/mills, compliant mechanisms oh, also dancing.

@SianaGearz 13 күн бұрын

Is wire EDM one where you're not dancing yourself but your arms and legs are dangling from a puppeteering rig?

@dimitar4y 13 күн бұрын

@@SianaGearz that sounds accurate.

@G3ML1NGZ 14 күн бұрын

The wire EDM machine would be a godsend for me in NDT. I do ultrasound flaw detection in industry and being able to machine a "test block" that would have miniscule flaws to practice before a full run would be great.

@chriss2295 14 күн бұрын

Disrupting the Edm market is natural. Nice work!

@KarriKoivusalo 14 күн бұрын

This is enormous news, I've been waiting for this technology ever since Ben Krasnow demonstrated a sort-of-affordable EDM plunge drill device some years back! I have a hypothetical project that would require high precision machining on very tough steel (e.g. hardened 4340), it would be tremendously useful to have the cut made on a hardened piece to avoid distortions from the heat treatment process. I am very excited with the prospects DIY EDM will provide.

@stevehood9469 14 күн бұрын

That filament color guide is really handy. I’ll def be using that

@nukedathlonman 14 күн бұрын

I can think of a dozen uses for Open Source Electrical Discharge Machining with my RC's. I'll have to keep my eyes on this project. 🙂

@ericlotze7724 13 күн бұрын

The ability to make High Quality Injection Molds for things like the Precious Plastic type “Makerspace Scale” Injection Molding Machines would be a HUGE improvement this Open Source EDM Development is Enabling. I don’t know enough about injection mold design, and force needed etc, but if they can get molds that can reliably churn out actually useful/valuable things like LEGOs, or Buckets etc that would be huge.

@Hukkinen 9 күн бұрын

Excellent point. Is the mold part what is expensive in injection molding? So does EDM disrupt ejection molding also?! WTF?! :.D

@crytocc 6 күн бұрын

@@Hukkinen Yep, the mold development (several prototypes and a final one that lasts for enough production runs) is generally the expensive part of injection molding. Needs to be highly accurate, but also very strong, and often with mechanical designs to be able to get the resulting product out. Once you have a good mold, every individual production run is cheap.

@iteerrex8166 14 күн бұрын

Wire EDM machines have been very expensive. This is should do very well.

@Latrocinium086 14 күн бұрын

Yes! Yes, I would love to see an inexpensive part grinder/granulator!

@ridokilos-actual 13 күн бұрын

Extremely excited about the wire EDM machine, and also any advances in filament/print waste recycling. Keep it coming.

@GreatJoe 13 күн бұрын

"high voltage" "65 volts" oh, that's adorable :3

@button-puncher 13 күн бұрын

I LOL'd at that too but that's where electric code has the break. It used to be 70V but they dropped it. (Can't remember what to.) I worked with 70/100V PA systems and laughed when they changed the rule. I've never heard of anyone getting hurt by a PA system.

@ZURAD 11 күн бұрын

@@button-puncher Where we are, the limit for "high voltage" is 48V. We are legally required to let people know this.

@hellterminator 10 күн бұрын

@@button-puncher LOL, in my country low voltage is bellow 1000VAC/1500VDC. We do have a lower class which would literally translate to "small voltage" and that's bellow 50VAC/120VDC.

@miguelangelmxdz3861 9 күн бұрын

In some companies like the one i work, we consider high voltage from 50v cause the amperage is the one killing you.

@meisievannancy 8 күн бұрын

I was expecting 20kV for spark eroding, but 65V it is 😂😂 !

@MarcStollmeyer 9 күн бұрын

The filament library is a gamechanger! Wow thanks for sharing!

@hellocreeper88 14 күн бұрын

Edm is my favourite music genre!!! Also I guess the wire thing is cool

@laurahaaima1436 14 күн бұрын

You could make insane cooling ribs with it with gigantic surface area.

@Hukkinen 9 күн бұрын

Food-safe? LOL?

@bobkaster1 13 күн бұрын

The EDM machine is so cool. Looking forward to finding an opportunity to picking up one of those machines. And the color matching library - that's a resource that I hope never goes away.

@skysurferuk 6 күн бұрын

As a retired U.K. Boilermaker, now hobby maker, I would love to hit Open Sauce. I just cannot justify the cost of flying over the pond & the $200 admission. Love the E.D.M. Great coverage, just the right amount of detail.

@HexwareGaming 2 күн бұрын

Thank you for pronouncing Loveland correctly! So many people (especially on tv shows) pounce it Love Land

@arklanuthoslin 14 күн бұрын

already had the link for the filament colors library saved, wonderful idea. The EDM equipmentlooks really interesting. Also, yes, I love the idea of the mini shredder. I've got a few "medium" size moving boxes full of waste PLA just waitingto be shredded and re-used. that'd be a start, at least.

@gfixler 6 күн бұрын

@26:50 I have a bunch of hobbies, including the fiber arts, and this happens all the time with yarn, too. You always have to look at the dye lots on the yarn labels, to see which were dyed together, and therefore have the same color. If you get yarn that looks identical, but has different dye lots, and then knit with one for half a sweater, and with another for the other half, you'll most likely see it. It'll look like half the sweater was left out in the sun for years and faded a bit. You can get around it pretty well by alternating skeins every row. That's a bit harder with 3D printers.

@I2AT 12 күн бұрын

We just bought one of the v2 for the ender 3. Looking forward to testing and tinkering with it. These guys are very cool. Happy to put money down on their project.

@ethanmiller5487 14 күн бұрын

Industrial EDM machines have apps for your phone to monitor weekend long burns. Most mold shops have at least a sinker and a wire EDM. I'm a laboratory machinist at a university in the states so I get to cut lots of weird materials. I've would love to cut a diamond!! My least favorite material to EDM is some weird steel (can't remember the name) made for heating elements. Kept breaking the wire no matter what setting I changed!! Grr!! WC cuts like butter!

@nonsquid 14 күн бұрын

I would like to see an EDM machine cut a neodymium magnet in concentric conical circles so that each inner piece repels the outer piece in a locked extendable cone. It would be like a magnetic spring that would collapse down to the original magnet size the spring up to maximum height.

@nicocesar 14 күн бұрын

Thats a cool idea. But Wouldn't they rotate to attract eachother? I'm a visual person... I need a diagram

@RubixB0y 14 күн бұрын

I don't think concentric circles is possible, you need a starter hole for each path

@EatRawGarlic 14 күн бұрын

If you're going to EDM within a magnetic field, be prepared for some interesting movements of your wire due to Lorentz forces. Also, the nickel layer on neodymium magnets is there to protect the corrosion sensitive alloy underneath. When you expose it to water, it may lose its magnetism rather quickly.

@nonsquid 14 күн бұрын

@@nicocesar Like they do at Benihana restaurants when the chef slices up an onion and hits it with steam and the onion sections rise up into a cone.

@nonsquid 14 күн бұрын

@@RubixB0y I think you are right, but how about a thin spiral? I know the neodymiums are brittle and fragile, but it might work once.

@dac7046 13 күн бұрын

Yah I can see an EDM machine in my future. Disappointing that I live 10 minutes from the event location but didn’t know about it until I saw your video.

@michaelbraaten 13 күн бұрын

I love the Wago bus on the tool head! I use all different kinds of Wagos for low voltage AV/datacom projects at work :)

@NullBlox 13 күн бұрын

Id be making a ton of Electric Skateboard parts with this! This thing is awesome! I want I want I want..... Wait.... I need, I need, I need! Im excited to see what happens when these get in the hands of the creators and artist! This is not only game changing but could be life changing for many! 11/10 keep turning it up!

@carlettoburacco9235 14 күн бұрын

The best tool/machine isn't the one that's the best, it's the one you can have/afford/manage. I develop software for industrial extruders: to give you an idea, during processing they use tens of kg of plastic per minute, the feed screw alone weighs 20 tons and they have tanks of 1 or 2 tons of pellets. They are certainly better and faster than our 3D printers: but if you don't have several millions, a warehouse, 4 or 5 operators etc. you can't have or use it. Same thing for CNC: I modified an Ender 5 Pro and a Plus to also use a spindle. In aluminum I can only do 0.16/0.2 DOC: slow but better than nothing. Next thing: EDM for sure.

@MarksGoneWicked 14 күн бұрын

Definitely down for a shredder! Especially if it can handle HDPE #2 plastic. I have a huge collection of colors.

@MA-qx6rn 6 күн бұрын

Rack Robotics are amazing for making this open source, I cant wait to build one they have so many uses!

@matanuywild2726 14 күн бұрын

YESSS give us a smal shreeder for failed prints at home. pls i need this

@shmafoo 13 күн бұрын

Props to the EDM guys. It's a very interesting and useful technology and making it available for cheap (compared to regular EDM) will make a huge difference. Looking forward to how this will change prototyping and small scale manufacturing for small businesses and hobbyists.

@BRUXXUS 14 күн бұрын

Heck yeah! EDM for all! That is extremely exciting to me!

@HexenzirkelZuluhed 14 күн бұрын

I'd like an EDM machine. Price point around 1000€ sounds good. Please keep in touch with these guys. Maybe sell their stuff on your shop even? Sourcing US products in germany usually sucks. I'm sure you know what I'm talking about.

@jungletek 12 күн бұрын

I think that's going to be one of the benefits of these guys (Rack Robotics, etc.) open-sourcing their designs, you should be able to pick up local(ish) equivalents or, since you (and the community) have access to the design and associated files, you can adapt for local supply availability.

@SolarMillUSA 12 күн бұрын

Outstanding work guys

@leogray1091 14 күн бұрын

The Shredder is really eye catching! I want to build one and get a filament extruder now.

@the_arcanum 18 сағат бұрын

Can't wait for EDM machining metal molds for plastic injection at home !

@HenryKlausEsq. 9 күн бұрын

Super cool! Open source machining, CNC, printing is moving at speed. Can't wait to see small components like what you'd see in a mechanical watch made with Open Source EDM.

@RaviVemula2 5 күн бұрын

we utilize sinker EDMs commercially for med device manufacturing. super cool to see the tech making its way to the hobbyist scene!

@AerialWaviator 14 күн бұрын

Thanks you @CNCkitchen for constantly sharing such inspiring topics. EDM is an amazing example of technology that could be readily available to hobbyists, and professionals. EDM combined with 3d-metal printing offers so many amazing possibilities. Truly stuff of sci-fi becoming reality.

@Sttreg 14 күн бұрын

for the micro schredder: The fact that there aren't any "easy" and "Affordable" way to shred failed prints is the main reason I am not building an artme filament extruder. That micro schreder is a great step, as poop filament is already a large amount of waste plastic. Looking forwad to the evolution of this

@ttabbal 12 күн бұрын

Well, get the EDM first. Making shredder parts just got a LOT easier.

@MaciejWiercinski 9 күн бұрын

Same here. I decided to buy an artme a year ago. I am waiting to get a decent way of shredding first, while new versions are developed. I just hope artme won't close down or shift away from the DIY model while I am waiting for the shredder gap to be filled.

@05Matz 12 күн бұрын

...open-source CNC wire EDM could provide a novel path to the last few precision metal parts required for the old dream of a (room full of) Reprap(s) that make all their nontrivial parts. At that point you need... some way to source or produce ceramic tubes/guides (for the EDM machine, for hotends, etc.), and commodity hardware and semiconductors. I love seeing the capabilities of open-source benchtop manufacturing expand!

@refusefntk 9 күн бұрын

I love this story and the developments these guys are making in the process. These machines will change the world for makers.Thanks for your hard work guys. I look forward to seeing Production. I will definitely buy one, once the kinks have been worked out.

@radicalreel 14 күн бұрын

Wow stunning episode.

@jessewgeek 13 күн бұрын

On the filament colour library... I will definitely be using this! I've bought some truly disappointing filaments in the past, from a "gold" that was more brown to "orange" that was "emoji yellow" (fortunately I had good uses for that one).

@user-ev5ur7fw4t 12 күн бұрын

Man the EDM is mind blowing, Epic job guys keep it up looking forward to buy one soon.

@ivovass195 14 күн бұрын

Very cool exhibits you showed here. The cutting tech that can be available for the enthusiast is great. The filament indexing and color matching website is superb and will definitely be using that. Thanks for sharing your experience

@Willy_Tepes 14 күн бұрын

With an EDM machine I could at last make use of the titanium and tungsten I have in my scrap box. It would even cut tungsten carbide heating elements.

@OldCurmudgeon3DP 14 күн бұрын

EDM isn't quite the same, but works on a similar principle to Plasma cutting. EDM = scalpel Plasma = axe

@DaedalusHelios 14 күн бұрын

If reliable, I could see purchasing a larger unit for my engineering department. I would love one for EDM cutting large gears. 40k USD would be a good target price for a large corporation to not blink twice on it.

@Donorcyclist 13 күн бұрын

Amazing machines, and amazing lavalier microphones, Stefan! Audio quality on this video in a difficult environment was fantastic!

@dcsensui 11 күн бұрын

Amazing what was created in the face of adversity (job loss). Brilliant ideas!

@magomat6756 9 күн бұрын

My dad was head of matrix maker shopn and there was such a big machine the wire was copper tools and the medium was a sort of oil. It was end of '70. I loved that machine its was magic at the time for me.

@robertmorey4104 9 күн бұрын

The EDM is so cool! I used a Charmilles wire EDM for production of intricate othepaedic implants from Titanium sheet. Make a stack an inch high. Drill a start hole and next day stacks of completed cut parts. A mini shop version would be awesome! Nice work guys! Hes right about production EDM machine being expensive the Charmilles machine was about $400k in 1980s. 😮

@robertasumendi 8 күн бұрын

the shredder is so awesome!

@Petch85 14 күн бұрын

Having a wire EDM at home would be so cool.

@svenstopke415 8 күн бұрын

That Opensource EDM-Machine is awesome. I thought about getting the one Applied Science used, but the EDM-driver alone costs 5k. So those guys are the way to go for hobbyist.

@tiagooliveira95 9 күн бұрын

excuse my french, but you guys are f*king amazing, can't wait to put my hands on that edm

@CNCKitchen 9 күн бұрын

fuck yes!

@tobiasjennerjahn8659 14 күн бұрын

The Bettawire looks absolutely amazing. I was wondering when someone would build something like this. I'll wait another year or two to let them iron out the kinks, but I'm pretty sure that I will buy one of those sooner or later.

@MinecrafterPiano 14 күн бұрын

Saw their (Morlock's) Betta Wire video a few days ago - really excited for it, though I'll wait a while before purchasing one. I have no right to request this, but it'd be nice if you could link to their video in the description for those curious - I think it'd be enjoyed by this crowd.

@Rebar77_real 7 күн бұрын

Why did I wait so long to watch this! So cool!

@Hachiro 13 күн бұрын

I'mma definitely send some filament to that project, and give them some donation as well. That's an awesome project that'll help a ton when it comes to finding replacement colors, or colors that might look good together.

@Hachiro 13 күн бұрын

I thought about going to. RMRRF. Wish I had cause I probably would've met that stand and have been able to donate in person. Though.. I actually picked up like 15 spools of filament that Saturday from someone who was leaving the hobby. So, I guess I may have lost out on that deal if I did go. (100 bucks for I believe 14 spools of PLA, and 2 spools of TPU. Don't remember exactly. Most were 800+ grams left. Only two had less)

@cedvano 14 күн бұрын

Wow, I search for shredder since long time. Thanks, I print this.

@klaidasrunele 11 күн бұрын

First time I've bought anything from an ad. Saw you guys had TS101 compatible heat set tools kits and snapped it up straight away.

@ff1077 12 күн бұрын

The cheap shredder idea seems pretty appealing to be honest. If they came in either a partially assembled DIY kit or complete build, and also find a good extruder kit that is less DIY, I would be 100% interested in it to take care of all the failed prints I have stored away. I really want to get the process done at home and use it towards future projects and such.

@antoniomromo 13 күн бұрын

Oh the shredder and filament library are my favorite.

@joncorso6103 10 күн бұрын

Filament library could be really useful once they fill out the selection. Of my 15 rolls of filament I own, a good 7 are missing from the list, including a few Bambu colours. It would be great if all the filament manufacturers got behind this and sent him the tiny lengths he needs.

@YouTubestopsharingmyrealname 5 күн бұрын

I'm sending Joe a few filament samples this week. He's got such a backlog, so no idea when he'll get to them.😅

@mecha417 14 күн бұрын

Wow, some actual good news for us mere mortals for once and not corporate-to-corporate shilling with exorbitant pricetags.

@964cuplove 11 күн бұрын

Unglaublich was die Leute alles machen - echt geil !!

@ChrisBigBad 14 күн бұрын

Uh, nice. I have seen my first wire EDM system at CERN. It was about one cubic meter in size, working on a huge metal part. Really impressive. Very nice to see the desktop machine!

@marshallwebber9682 14 күн бұрын

The EDM looks promising if the price and precision can get under that of a used metal mill, which would be the first stop for someone either experimenting, prototyping, or low volume production.

@Torskel 13 күн бұрын

This would be great for Watch-parts

@TheShorterboy 12 күн бұрын

EDM is awesome and if it can plunge you just need a cheap mill to make the dies out of graphite

@ikocheratcr 14 күн бұрын

The filament color match is pretty cool resource. As a future enhancement they might get full spectra under controller light, not just RGB from a camera. That will help with color rendering index issues from LEDs or any other source they use, or one uses, to get the most consistent results. Also for those filaments that fluorescence, maybe also have a controlled light source to trigger that, ie UV in different parts of spectrum. Very neat idea.

@AhliahJo 14 күн бұрын

Hi! They use a spectrophotometer for the color measurements, and are working on getting an improved one in the future. The photograph is used for comparative color.

@TS_Mind_Swept 13 күн бұрын

Wish I had known about that every filament color site a while ago, I was looking for a very specific shade of metallic green and I couldn't find it for the life of me.. I found something pretty close, but I wouldn't say it's exact. Will definitely be checking that site for color matching in the future

@Sven_Dongle 14 күн бұрын

Cutting stacks of silicone steel sheets for BLDC stators.

@marcgionberthoud9394 14 күн бұрын

This is technology from the eighties of past century... 😃😃 Back then it was done with brass wire and this was quite expensive, especially if you run the machine 24/7 as we did back then. Today however I would buy a MOLYBDENUM wire machine. These you can get for 2500 USD...

@tylermumford6073 9 күн бұрын

Honestly, I got into 3D printing with the intent to try modeling and creating custom tools for modular multi-tools like the GOAT tool and Roxon Flex. Wire EDM looks like an amazing way to create sturdy tools for those systems. I'm probably years away from making a purchase like that, but it fits my ideas perfectly.