How to DRILL & TAP Hard Jaws

How to DRILL & TAP Hard Jaws | Big Lathe Chuck

Рет қаралды 501,014

Жыл бұрын

We show how easy it is to drill and tap the hard jaws on a lathe chuck! We've got a new 3 Jaw Chuck for our big Shenyang lathe and need to set it up with bolt on soft brass pads. We do this with all our 3 jaw chucks to make set ups of chrome rods simple and quick. We show the step by step process of drilling and tapping the hard jaws of the chuck and also make up the brass pads that are bolted on to the jaws. This is a quick, easy fix to solve the problem of dropping & searching for shims in the chip tray!
In this video we are using:
- Hafco BM-63VE Milling machine
Join our channel:
We upload new videos every Friday at 5pm AEST! If you want to see more of our videos click LIKE & SUBSCRIBE! You can subscribe to our channel here: bit.ly/ceesubscribe
Join our Patreon Community: / cuttingedgeengineering
Official CEE Merch shop: www.ceeshop.com.au
Check out our AMAZON store and explore our favourite finds that we use in the workshop:
www.amazon.com/shop/cuttinged...
To see more follow us on online here:
TikTok: vt.tiktok.com/ZSdHhtN4h/
Instagram / cutting_edge_engineering
Facebook / cuttingedgeengineering...
About Us:
Our channel is all about showing you real life machining work from our workshop on the Gold Coast Australia. We specialize in manual machining, hydraulic repairs and heavy fabrication for the earth moving, mining and civil construction industries. So if you're a machinist that wants to see some big gear in action be sure to subscribe to our channel right now. We upload new videos every week that show lathe machining, milling, welding and all the good stuff that comes from a machining workshop. If that sounds like something that you would enjoy seeing, then make sure to join us by subscribing!
Music: www.epidemicsound.com/referra...
#australianmachinist #machineshop #machinist

Пікірлер: 1 000

@hot_wheelz Жыл бұрын

Well look here folks, this here is a prime example of the fabled 2nd video in 1 week. Thanks Karen and Kurtis!

@maxcactus7 Жыл бұрын

Monday CEE - It's like having TWO Fridays in one week! Great work, Kurtis.

@d00dEEE Жыл бұрын

It's such an obvious quality-of-life improvement that I can't believe chucks don't come like this from the factory...

@arkeyethenoo Жыл бұрын

That look of exasperation and dispair in the out takes was priceless😂👍👍👍

@philho122 Жыл бұрын

You say: Thanks for watching! I say: Thanks for filming, editing and uploading! And thanks for sharing tips and tricks! Greetings from Germany

@jamiemarshall3070 Жыл бұрын

Did you know that none of the filmed segments are sped up. That's just how fast Curtis works 😁

@CuttingEdgeEngineering Жыл бұрын

this comment is approved as truth, this reply was written by Homeless 🐾

@frankward423 Жыл бұрын

Note to staff... keep Curtis away from the Red Bull dispenser.🤣

@ellieprice363 Жыл бұрын

He was lucky not to break the tap going that fast. 😎😉😉😉

@67cudaksa34 Жыл бұрын

its magic

@paulsharp695 Жыл бұрын

I like how the first one takes ages, but as he learns it gets quicker and quicker /s :D . ps, *Kurtis*

@valuedhumanoid6574 Жыл бұрын

I had one of those highly repetitive jobs where I had to run 50 pieces in a row. I was using loose shims to prevent the jaws from marking up the workpiece. After 30 some parts I forgot to put one of the shims in and of course it scrapped the piece. After that I made my own set of these. Learn as you go!

@vincentwalker2081 Жыл бұрын

My computer is hacked

@user-tr2dh4xx6u Жыл бұрын

i would have taped that sht on lmao

@jtbrownful Жыл бұрын

@@vincentwalker2081can you un hack your computer

@Ottoman83 Жыл бұрын

Hey, I know you from Grim Reapers comments!

@tomte47 Жыл бұрын

Machining is about being the right kind of lazy :), taking the time to make it as easy for you as possible and you will end up making parts better and faster in the long run.

@SloppyMechanics Жыл бұрын

ah yes, nothing is as exciting as seeing a new upload from CEE

@CuttingEdgeEngineering Жыл бұрын

cheers mate thanks for watching the channel!

@HolosunGodOfOdin Жыл бұрын

Denmah on CEE?! My worlds have collided.

@MotoRestoFL Жыл бұрын

I have a Bison 3 jaw in my little Atlas lathe, really nice chuck but didn’t come with outside jaws (it was on the machine when I bought it). I emailed Bison and they provided me material to figure out which jaws I’d need since my chuck is old and not listed in even their internal documentation. They asked an old timer and he knew which ones they were. Really great company.

@krisholt Жыл бұрын

A quick tip when installing jaws on a scroll chuck, turn the scroll just past the slot for the jaw, put the jaw in the slot and back the scroll up until the jaw falls down. This trick ensures the jaws are in place, and not hanging on a burr or similar.

@CuttingEdgeEngineering Жыл бұрын

good tip thanks for sharing!

@lqueryvg666 Жыл бұрын

OMG - I had to do a double take at my screen and calendar - LOL - WOOHOO - It has been a bad day at work and THIS video just put me back at ease!!! THANK YOU!!!!!!

@CuttingEdgeEngineering Жыл бұрын

You are so welcome! Hope the rest of your week is better 👍

@cda32 Жыл бұрын

Love how you say "Only a 630mm chuck" - you could swing my entire lathe in that chuck.

@ckamina768 Жыл бұрын

I hope you didn’t feel pressured to put out more videos! I have always enjoyed your Friday video early morning with a coffee! That being said, I was pleasantly happy seeing this released and will watch anything you guys put out!

@shopshop144 Жыл бұрын

This isn't Friday?!

@Matt-my7pz Жыл бұрын

Please don't feel pressure, like I said before, the world of KZfaq will ALWAYS ask for more and consume you until your life is all stress. One video a week is the money spot and plenty enough a burden for you good folk. Don't do more content. In general a KZfaq audience has no skin in the game and although pretend to care about the welfare of the person, there is no connection other than basically clicking and texting. You guys are beauty where you are!

@jones7399 Жыл бұрын

i genuinely believe Kurtis spends more time redoing shots then actual engineering

@markneedham8726 Жыл бұрын

...or does he do the "out takes" pretending that is how hard it is....?

@BlueSpark-vy3fd Жыл бұрын

Just shows you how fast an expert can get the job done !👍

@legend7ify Жыл бұрын

@@markneedham8726

@shawbros Жыл бұрын

"then actual engineering" than

@daleburrell6273 Жыл бұрын

WHAT ARE YOU GONNA DO ABOUT IT?!

@tinman7551 Жыл бұрын

Two videos in one week 😮 what amazing new year content is this !! 🎉❤ Please tell us more about your drift car 🥰

@CuttingEdgeEngineering Жыл бұрын

All about the drift car in our recent Q&A

@Uli_Krosse Жыл бұрын

Everybody, watch this Q&A. There are BRILLIANT photos in there! 😎

@adnanalajwadi7589 Жыл бұрын

I am from Basra, Iraq - I look forward to see your videos every week on Friday. To enjoy your skills and Karen. Thank you all

@aerialrescuesolutions3277 Жыл бұрын

I love the brass pieces hitting the floor, 5 camera angles on just that shot. Karen is beyond editing prowess. Thank you both. Jim, Portland, Oregon USA

@markschweter6371 Жыл бұрын

It was 🎼 MuSiCaL 🎶

@Bgoodman6113 Жыл бұрын

Bonus content from CEE…it just doesn’t get any better!!! Kurtis and Karen, top notch as always! Also I like seeing things Kurtis does for the shop to do jobs properly and make him more efficient. The guy is just a master at his craft and then you’ve got Karen “Spielberg” putting out masterpieces in her own right!! I’d watch a video a day even on the most trivial thing, just because it’s CEE!! 🤷🏻

@paulg3336 Жыл бұрын

An alternative holding arrangement for soft jaws is to design them as a U shape and on one of the legs bore a hole and epoxy a thin neodymium magnet to hold it on the chuck jaw. If the magnet is close to the thickness of the brass , chips that stick to the magnet can easily be wiped off.

@Ghine91 Жыл бұрын

The gags you both made at the end of the video are pretty! You looks like to got a real and honest relation, the way Karen help Kurtis to find the right way to explain is literally a love demonstration!

@BruceBoschek Жыл бұрын

Frosting on the cake! Karin is sure you put up this video for her as she missed the first viewing of the flame spray video. It gave me a chance to serve her a green apple martini on Monday evening. She was very happy and so was I. I liked watching the carbide end mills digging right through that hard surface. Thanks much for the video. We appreciate every one of them.

@CuttingEdgeEngineering Жыл бұрын

Hi Karin & Bruce, sounds like the perfect way to watch the video. Hope you enjoy the rest of your week 😁

@steveanderson4768 Жыл бұрын

It is amazing how the material when you drill it go from the hardened areas to the softened steel of the jar truly does make a huge difference like everything he does when you use your head and you think about it rationally it’s actually quite easy thanks Kurtis

@bobqzzi Жыл бұрын

Every month or so I can't help but be reminded of that famous Crocodile Dundee scene. "That's not a chuck, this is a chuck!"

@peterb1594 Жыл бұрын

I'm Peter from Holland (the netherlands It seems to me that youre wife hes to do a lot of EDITING with you . Sofar I've seen al your videos and still love ever one of them..looking forward to the next one

@sky173 Жыл бұрын

Thanks for being an inspiration to many of us. Love the videos. Please never stop!

@Tiger351 Жыл бұрын

Gotta love it when one of your favourite chaanels drops a bonus video, top job and it'll definitely make your life easier than using loose shims all the time.

@sjv6598 Жыл бұрын

Homey! You big beautiful dog you! Who else loves homey? ☺️

@CuttingEdgeEngineering Жыл бұрын

We love Homey! 🐾🥰

@sjv6598 Жыл бұрын

@@CuttingEdgeEngineering 10:48 Homey nearly has as many toys as Kurtis ☺️

@go06bolts Жыл бұрын

Had a really rough day at work today, totally changed my night! Love you guys! Thank you again!

@dans_Learning_Curve Жыл бұрын

+100 for excellent camera and editing work!

@CuttingEdgeEngineering Жыл бұрын

Thank you very much!

@walter9724 Жыл бұрын

I'd be lost without my automatic center punch. Best thing I've bought, except for maybe a stepped drill bit 😁👍

@jasonxd5738 Жыл бұрын

Always amazed me to see how many different types of tools you have. Seems like every video you pull out some new manner of tool from who knows where! Myself and I'm sure many others are a little jealous at the amazing workshop you've built up over the years!!

@Hyratel Жыл бұрын

a quick project, an hour out of your day for who knows how many hours and patience-points saved from Every Job that needs softjaws, thank you for taking the extra time to get this on camera. your straightforward and up-front explanations of the process and reasons-behind the process make for possibly the most informative "Not meant as tutorial" videos around.

@briantok6518 Жыл бұрын

I like to see your videos, I can get a lot of things from your videos, I'm enthusiastic I'm from Indonesia 🇮🇩 🇮🇩

@TrondBrgeKrokli Жыл бұрын

Thanks a lot for this unexpected joy to see and hear from you again. Highly appreciated. Have a wonderful week. ❤🐶😊😊

@ArmorerUSMC Жыл бұрын

Bonus video week!!🤙🏽 was looking forward to this one. Outstanding as always. Thank you

@caymanchristopher7014 Жыл бұрын

Wow what did we do to deserve a Monday video?! Thanks for making my day!🎉

@CuttingEdgeEngineering Жыл бұрын

Hope you enjoyed it!

@Happily_retired Жыл бұрын

@@CuttingEdgeEngineering ABSOLUTELY!! Thanks from Florida, USA.

@alisciamarotta3888 Жыл бұрын

Second that comment, Ohio (USA)

@christoph72761 Жыл бұрын

Kudos for the video editing of the drill and tap! That not only was the perfect balance of showing the process and saving time but also perfectly seamless. 👍

@alisciamarotta3888 Жыл бұрын

Thank you for the bonus video Karen! Look forward and enjoy all your videos. I'm not a machinist nor a fabricator, just interested in equipment and what goes into them, and of course cute adorable " HOMIE" KEEP THEM COMING! greetings from the banana country, OHIO ( USA).... HAVE A SAFE, HEALTHY AND GREAT WEEK!

@jasdunlop9907 Жыл бұрын

You Mill sounds a lot smoother after your rebuild well worth it I thought the jaws would be harder

@longlowdog Жыл бұрын

Whoah there. There I was having a safety snooze 8pm Monday evening and I woke up to a notification from C.E. My mind thought 'faaaaak it's Friday morning'. Damn near gave me palpitations. Regards from Scotland.

@MajesticDemonLord Жыл бұрын

Tis a good day when we have been blessed with bonus CEE content.

@matthewb8229 Жыл бұрын

Your method of finding center of the work area is better than mine. I mean, all I have is my son's wooden ruler from school, that has half the marks worn off of it.

@markschweter6371 Жыл бұрын

Your's has marks ? 🙄😏😉😁

@matthewb8229 Жыл бұрын

@@markschweter6371 Barely. 😄

@mikeinfinity2572 Жыл бұрын

Was not expecting this video on a monday but damn thank you it was a surprise. Wish we had more but know how it is busy and all. Nice chuck smart shopper. Great ideas with the brass.

@renatoaristeugomes3720 Жыл бұрын

A beautiful and pleasant surprise, a video of the CEE, on a Monday. I liked it too much.

@hrandhayrapetian3913 Жыл бұрын

Great engineering skills as well as fantastic cinematographic taste. Bravo to both of you.

@jamesbuttleman3130 Жыл бұрын

Nice project you'll definitely use. Short n' sweet,good camera work,well explained. Always like to see Homie,he's the "top dog" at CEE. Stay safe and well.

@davidnightingale2260 Жыл бұрын

You can actually see the hardened layer transition, just as you send in the centre drill.

@gail8494 Жыл бұрын

What a nice surprise! Thanks Karen and Curtis. Precision work as usual

@reeley Жыл бұрын

great engineering by Kurtis, great videography and editing by Karen. Thank you guys.

@yeagerxp Жыл бұрын

Well done . Informative 👍👍👍. Thank you for sharing. Be safe🇨🇦

@toblexson5020 Жыл бұрын

That's a great idea. And if you cannot use the bolts for some reason [maybe you're butting the work up against the jaws], then the old method can still be used, because there are just screw holes, no protrusions.

@berrieds Жыл бұрын

Beautiful video editing as always, loved the side-by-side shot when Curtis was tapping that second thread.

@awemowe2830 Жыл бұрын

I really find it amazing that you have a workshop, you do all this work, but you still manage to be so "grounded" and approachable, funny and likable. Both of you. I've never met a mechanic or any "handyman" in my life that hasn't been super annoyed or seemingly fed up with life in general. Love this channel so much. Thanks.

@roberthocking9138 Жыл бұрын

Welcome to 2023, always informative and the outtakes are bloody hilarious, have a great year

@RossDMTBYT Жыл бұрын

the joy when this notification popped up on a Monday night! 🙈 love it! keep er lit Curtis and crew! 💪

@billjamison2877 Жыл бұрын

Your skillsets amaze me! Great Video. P.S. Being known as a guy that can fix damn near anything, when it comes to machining, I know next to zero. I have learned quite a bit from watching you work. Thanks. Bill from Linglestown Pennsylvania

@georgeescaped6035 Жыл бұрын

BONUS vid thanks, might be the only machinist out there that does this or ones i have watched, THANKS !

@jeffanderson4979 Жыл бұрын

Love that idea! I bought all three model 91 Starrett tap wrenches because they are the best! I love to see tool hacks

@newtonzer0 Жыл бұрын

Karen, I love your editing. The way you compress a repetitive multistep task like the drilling of the holes and bending of the brass. Also do you do captions as well? Cause the outtakes captions were hilarious!

@AndyFromBeaverton Жыл бұрын

Lunchtime watching CCE, PERFECT!

@thomasechols8834 Жыл бұрын

you two, and the pup, make up for so much bad in the world, glad to see you both being productive.

@AlanSprague Жыл бұрын

Sweet bonus video! and right at my lunch break as well good times! so I am really curious to know if you can tell the difference in the milling machine now that you have done that massive maintenance job from a few videos back? It seems with so many of the bearings pretty much shot seems like it would be much nicer now.

@ronblack7870 Жыл бұрын

the bearings were not shot. the noise comes from the straight cut gears in the head when he shifts to low it goes through the gears. high just goes straight through so quieter. in the video at the end he found the noise was the same before and after.

@artszabo1015 Жыл бұрын

@@ronblack7870 Yet he still replaced a bunch of bearings that he said it needed so Alan did ask a valid question.

@trainman5371 Жыл бұрын

It seems like it is a tad quieter now

@floundergearjam Жыл бұрын

My Monday just got a whole lot better. Thanks CEE!

@brantnorthman9040 Жыл бұрын

Xtra content, nice beginning of the week treat. Thank you

@andrewjameson5918 Жыл бұрын

The mill sounds great after the service you did last year. BTW I loved that video.

@jasonbryant6694 Жыл бұрын

stellar camera and editing work. jaw #3 time lapse was a masterpiece. well done to the both of you. so glad to be along for the ride watching this channel evolve.

@CuttingEdgeEngineering Жыл бұрын

Thanks so much!

@matt.gordon6823 Жыл бұрын

Bloody beautiful, thanks CEE 👍

@MoraFermi Жыл бұрын

. . . I actually checked the calendar to verify I haven't somehow slept through an entire week. >.< Very nice work as always!

@johnmcclain3887 Жыл бұрын

Watching you set up pads for your jaws makes me want to set up a set for my own lathes. Always a pleasure to watch you work!

@CuttingEdgeEngineering Жыл бұрын

You should! 😁👍

@stihl0903 Жыл бұрын

Great Channel full of tips very well done.

@alisciamarotta3888 Жыл бұрын

And entertainment 😂

@FamousEccles Жыл бұрын

Yay! Bonus video! Thanks, Kurtis 😁

@KC-7mm Жыл бұрын

I can’t get enough of your channel typically I wouldn’t watch something that I’d do for a living and honestly I’m pretty critical of how people do things that being said your quality of work is top notch I really enjoy the machining I used to do it out of job shop but now that I’m working for myself I do welding Repairs on heavy equipment I haven’t got to investing in machinery and tooling this channel is inspiring me to get back into machine work especially because it goes hand in hand with heavy equipment repairs. Love the channel had to sub after seeing the quality you produce

@cullenmiller8170 Жыл бұрын

Hey a new video. That was unexpected. It sure beats watching the dryer go round at the laundromat. 😂😂

@broheim23 Жыл бұрын

Another great video! I greatly appreciate that you both took the time to record and edit a video of a relatively simple job. Thank you both for the extra work. One quick question: do the brass shims you're semi-permanently mounting to the hard jaws affect the part running concentrically? To my mind it seems like it might induce an unintentional offset.

@djpaulk Жыл бұрын

All 3 shims are 2mm thick, so they have no affect to concentricity of the part.

@tystahl3961 5 ай бұрын

I stumbled upon your channel and have not been disappointed. As someone who owns a landscaping business, I make a lot of my own repairs. I have already learned a thing or two from you.

@gwharton68 Жыл бұрын

Happy New Year and thank you for all the hard work you put in to make your videos.

@L36VS Жыл бұрын

That was a pleasant surprise. Very interesting. And outtakes hilarious as usual. Was just about to go out and rip the heads of my car. Your vid definitely helped me get motivated it's a good thing I don't have to use my brain as much as you. Cheers

@gzegorzbrzezinski1246 Жыл бұрын

Jak miło. Miłej pracy życzę. 👍👍🔧🔧

@macmac19800 Жыл бұрын

Widzę, że nie tylko ja oglądam, pozdrawiam ;-)

@gzegorzbrzezinski1246 Жыл бұрын

@@macmac19800 tak oczywiście. Fajny kanał 👍

@TrevorDennis100 Жыл бұрын

Well that's interesting. It never occurred to me that chuck jaws were not hard all the way through, but it makes sense thinking about it. I am surprised that you were able to drill into the jaws with an end mill, but I went back and had a closer look @4:06 and could see that your end mill had cutting face and clearance all the way to the centre. I'll check later, but I think my carbide end mills have a recess at the centre and definitely won't drill straight in. I do have 6mm carbide slot drills though. I was also worried that you used a tapping size end mill as the tap would still have to cut through the hard outer 2mm, but that was a fancy looking tap. Was it also carbide? I'd be worried about breaking a carbide tap if they exist. I am going to look at doing the same mod to our lathe, but using the 6mm slot drill so the tap only has to cut the softer inner material. So thanks for another super useful tip. I am 73 and long since retired, but I still love learning new things.

@HappilyHomicidalHooligan Жыл бұрын

The end mill was larger than the screw hole (5mm end mill, then a 4.5mm drill & tap) so neither the drill or tap had to cut into the hardened top layer... After he finished cutting the very first hole, Karen took a close up of the hole and you can see the shoulder where the end mill stopped cutting and the smaller threaded hole starts...

@LanceMcGrew Жыл бұрын

The end mill size cleared the outer tap diameter. Also he is using what is known as center cutting end mill.

@MachiningandMicrowaves Жыл бұрын

The slot drill was 5mm, the drill was 4.2, the tap was M5, so it wouldn't need to cut the hardened layer because the slot drill had removed it. You should be fine with a centre-cutting 5mm carbide cutter.

@number1trucker Жыл бұрын

I just love the out takes. I smile every time you put a new video out. BTW, hello from Canada. It's -30c right now. Wish I was there.

@johnquinn3899 Жыл бұрын

What a treat for Monday !!!!

@Hagop64 Жыл бұрын

Monday vid!?! Also, is there a reason you don't have your overhead crane reach over to your welding area? I notice you frequently moving pieces between the lathe-fork lift-welding and back. Seems like that would save time if the crane reached over there.

@SeanBZA Жыл бұрын

Probably crane is at end of limits, likely original use of the shop had the crane only in use in part, and a dividing wall to the other side. Now the shop is larger the crane is still limited, so the forklift and mobile crane get a lot of use in place of it.

@PhilG999 Жыл бұрын

I'm sure you've covered this before, and anyone that has changed jaws on a scroll chuck should know this, but you didn't mention that they are marked and have to be put back in the right place. Might save a "first timer" some frustration. 😁 And you can definitely see where the end mill gets through the hard layer! From essentially powder to stringy swarf. 😁

@CuttingEdgeEngineering Жыл бұрын

hey mate thanks for mentioning that here, I did mumble it to Karen but wasn't worthy enough for the video 😅

@JonoMacIntyre Жыл бұрын

Thanks for this comment, I was wondering if there was something like this to avoid a painful process to get the jaws all aligned

@djamesthree Жыл бұрын

This was an especially good video. The videography and editing on this channel just gets better and better. An especially inspired cut was the split screen showing Kurtis using the break to stop the tap after it got its start. We’ve seen a handful of videos now where he uses the mill to start a tap and I always wondered if it was just friction stopping the tap when he shut the mill down, now we know. Thank you both for sharing, and happy new year.

@alvisvitrups1068 Жыл бұрын

Approximately year ago installed Bison (made in Poland) 400mm free jaw chuck on my 1953 lathe. I highly recommend Bison chucks. Thanks for showing how to drill&tap hard jaws! I must get courage and do the same with my Bison.

@Melbournewelder Жыл бұрын

Great video and explanation on procedure on how to do thank you.

@ryankenny3774 Жыл бұрын

Truly appreciate the extra video….. not gonna lie kinda felt like Christmas morning all over, when I opened youtube and saw a new video from the CEE team available to watch!! 👏🏻😊

@johnwaby4321 8 ай бұрын

Very nice little tip there Kurtis . Saves all the fiddle messing about trying to hold them in place 👍👍👍👍

@sambrown1779 Жыл бұрын

Favourite KZfaq channel keeps on giving. Love ya work folks ✌️🍻

@ESmith-ik8vu Жыл бұрын

Although not a machinist myself, I do appreciate your videos. Not only, I should say, because of your obvious skill and approach to the jobs, but also to a very high degree on account of the camerawoman's uncommonly fine work, making yours both interesting and educating to the likes of myself. Thank you very much.

@killtune Жыл бұрын

This should be a feature of every chuck manufactured. Thanks for showing us your process Curtis.

@rhhart13 Жыл бұрын

Karen and Kurtis you screwed my week, now I have to rearrange my calendar and switch Monday with Friday! Thanks Alot..... 😀 😃 🙂 🙃

@darinwilson8663 Жыл бұрын

Thanks for sharing this, as soon as I have time, I'm going to do the same thing to my chuck jaws. Efficient and smart! I learn something new every time I watch one of your videos.. thanks 👍

@CuttingEdgeEngineering Жыл бұрын

Glad it was helpful!

@patrickcolahan7499 Жыл бұрын

Great idea. Another one for the To-Do-List. Thanks very much for sharing.

@Janom66 Жыл бұрын

Kurtis, this is a good solution for quality work. 👍 I don't have a lathe, however I will follow your lead at the first opportunity 👍👍👍🤘🙂 Karen, you are a great operator, excellent presentation of material, we always watch with interest. Thank you!!!👍👍👍🌷🌷🌷

@oscarmarfori613 Жыл бұрын

Quality workmanship comes by using high quality tools no wonder CEE is known all over Australia 👍

@johnparker221 Жыл бұрын

I love watching practical work. Spending an hour or so to save possibly 10s of hours of setup time. Smart.

@uglysteve1 Жыл бұрын

It’s like Christmas. Thanks for posting. Steve

@25vrd48 Жыл бұрын

Your videos teach us something every time . Keep producing instructional videos . Not all of your viewers know the information you share . Great video .

@CuttingEdgeEngineering Жыл бұрын

Thanks, will do!