CZ 457 MAGAZINE EXTENSION (ANARCHY OUTDOORS) HOW TO

No video

CZ 457 MAGAZINE EXTENSION (ANARCHY OUTDOORS) HOW TO

Рет қаралды 9,152

Күн бұрын

Consider checking out our website (www.pursuitofaccuracy.com) where you will find more detailed gear info, merchandise, and ways to support the channel via Paypal or Patreon.
The Links below are Affiliate links. I do get a small kickback off of your purchases if you use these links.
Anarchy Outdoors: www.anarchyoutd...?afmc=pursuitofaccuracy22&
Use code: pursuitofaccuracy22
Axil: goaxil.com/?rf...
Use code: PURSUIT15
I get this question quite a bit so here is a quick video of how I install these magazine extensions on my magazines with no issues.
Consider checking out our website (www.pursuitofaccuracy.com) where you will find more detailed gear info, merchandise, and ways to support the channel via Paypal or Patreon.

Пікірлер: 73

@dougtaylor8715 Ай бұрын

Spring and detent will go flying! Thanks for keeping this available for new cz457 owners.

@austincrowe5194 2 жыл бұрын

Excellent tip. These extensions were frustrating to me for two reasons: they were a bugger to get on, and they wouldn’t feed. This tip clears up one of those problems. The other was the follower getting caught in the transition between the extension and the mag body. Happened on all of my mags no matter what I did. So I took a small file and added a slight radius to the mag at the transition point. Didn’t take much, just slightly more than breaking the edge. Now they work flawlessly.

@PursuitofAccuracy 2 жыл бұрын

Awesome

@Jeff-mv4yy 2 жыл бұрын

Excellent Josh . I use the same method when cleaning 1911 mags except I contain the spring under the mag follower instead of the base plate. It never occurred to me to do the the reverse to install the extended base plate !

@jamesdietz6899 2 жыл бұрын

Awesome! Definitely works using this method. You learn to hear that “click,” as the spring pops into the bottom extension. I had been a bit pissed that these were not working as advertised. You need to get Anarchy Outdoors to link to this video. Thanks!

@PursuitofAccuracy 2 жыл бұрын

I have talked to them and given them permission to use my video if they want to

@joebaldenweg 2 жыл бұрын

100% agree, I had to fiddle around with mine ALOT to get everything to square up and drop into the extension. This video would have been gold about a month ago

@sgtlt 8 ай бұрын

Got 2 of these and thanks to this video they were installed with no problems, 1 holds 12 and the other holds 13, thanks for the great tips

@jackjill521 Жыл бұрын

I recently put 18 of these extension on. I used the same method of install as you. Got about 50/50 on function. Took all of them apart and polished all the sharp edges on the magazine followers. Also had to take burrs off the opening on the bottom of some mags. After this..... all 18 are 100% reliable with 13 rd capacity. All of the function issues fell on CZ and their crappy manufacturing tolerances. It was well worth the extra work to make them work properly!!! 👍

@PursuitofAccuracy Жыл бұрын

18 is a pile of 13 round mags😁 Ive never bad to debur or anything but I have the 4 or 5 ive been using forever so that may not be the case with the current mag and extensions. Glad you got em all working

@Juliang61 Жыл бұрын

Josh, you are a genius!!!! Started NRL22 this year and you are a true inspiration!!!

@PursuitofAccuracy Жыл бұрын

Thanks Julian, appreciate ya watching

@richardmattix5322 2 жыл бұрын

Thank you Josh just in case I decide to get a mag extension.

@PursuitofAccuracy 2 жыл бұрын

Np, thanks for watching

@D70340 2 жыл бұрын

Thank you Josh. Nice to actually see a video on this. I`ve used this exact same method for years on most of my mags.

@andyu918 9 ай бұрын

Thanks Josh!!

@wallykeys7730 2 жыл бұрын

Josh you are the man! I just purchased 2 CZ’s one with Manners stock and the other has the Boyd’s At One. Now to dress them out! I really appreciate all your info so I can make the best buying decisions when purchasing all this! Keep it coming!

@PursuitofAccuracy 2 жыл бұрын

Thanks

@Renegade22 Жыл бұрын

Just fought this for 15 minutes. I sub to your channel (thanks for all the great content!) came across this video. And BAM! Mag works perfect now. Thanks Josh

@PursuitofAccuracy Жыл бұрын

Glad it helped you and appreciate you watching

@erniedecker4176 2 жыл бұрын

OK, I "Think" I've got it. I believe the follower was hanging uo on the square edges of the extension. I beveled those flat square edges and it seems to be working now. I'll see how it performs next time I get to shoot.

@PursuitofAccuracy 2 жыл бұрын

Nice

@adamclayton1295 8 ай бұрын

I'm about at the end of my rope with these mags. I bought 3. 2 of them worked to start with. One never worked with more than 10 rounds. At this point I only have 1 that works at all. The other 2 don't work period. The rounds won't stack or feed right. They hang up and stick constantly. I've taken them apart, cleaned them, put them back together over and over. Buying these was one of the worst gun purchases I've ever made lol.

@PursuitofAccuracy 7 ай бұрын

That sucks brother. I got 2 or 3 i still run now with no issues. Have you reached out to them about em?

@adamclayton1295 7 ай бұрын

@PursuitofAccuracy I haven't. I don't know who to reach out to. And don't know what they would do if I did tbh.

@terrykleypas50 2 жыл бұрын

Thanks Josh, always informative while entertaining.

@charliesiempelkamp511 2 жыл бұрын

Thanks for this video. I bought mag extensions from MK Machining and had a hell of a time. I actually gave up and bought 2 from Anarchy. Still had problems because I buggered up my springs pretty badly. It took a bit to straighten them out to get them to run. MKM don't have the hole in the center to insert a tool to fiddle with the spring. I'll try your method next time I have them apart. 2 new 10 rd mags will be on order for me soon to put my MKM extensions on.

@GaryKim-id1lv 9 күн бұрын

Fantastic tip! Thanks Josh. I have problems removing the Anarchy Outdoors +3 extension because the follower spring is extended all the way into the extension. Is there a trick to getting it off? Thanks again

@austincrowe5194 2 жыл бұрын

Looks like this vid might have sold AOD out of these extensions. Looked this morning and I recall them being available. Then I realized I didn’t recall how many I needed to finish off all my 10 round mags. Got home to count and went back to buy them. Now OOS.

@PursuitofAccuracy 2 жыл бұрын

Yikes. Sorry about that haha.

@austincrowe5194 2 жыл бұрын

@@PursuitofAccuracy nonsense. It’s great for AOD and I know they will make more.

@PursuitofAccuracy 2 жыл бұрын

@@austincrowe5194 I reached out to them to see if it was a spike in the extension sales or if its just dumb luck haha

@AnarchyOutdoorsOfficial 2 жыл бұрын

They are back in stock!!

@AnarchyOutdoorsOfficial 2 жыл бұрын

@@PursuitofAccuracy we had a bump for sure. Time to make a 5 rounder.

@davidneff730 2 жыл бұрын

I wish you could post photo comments I found 14 round magazines from m&k machining I bought 5 and none of them feed in my rifle

@JohnSmith-fi2gu 2 жыл бұрын

Just bought some l3i mags for my b14r because the b14r mags don't feed in the woox chassis.. hoping they work great fingers 🤞

@PursuitofAccuracy 2 жыл бұрын

Nice

@mikemcallister9091 2 жыл бұрын

Hey Josh, Just got into a CZ 457 thanks to your great videos.. So now that I have been sorting out what ammo it likes I was wondering where to buy Eley in bulk? I like the Tenex and team for warming up. Thanks !

@PursuitofAccuracy 2 жыл бұрын

Killough shooting sports is where I get it from

@jwschroeder804 Ай бұрын

Yes, I’m now that guy…. I removed the extension to adjust the spring and watched my detent disappear 😖. Anarchy Outdoors couldn’t help and no response from their supplier. So Any idea where else I might find a replacement?? In the meantime a paper clip is my friend 😵‍💫 Thanks in advance.

@PursuitofAccuracy Ай бұрын

@@jwschroeder804 I've never actually looked for one to replace. I think I lost 1 and then stole it from a 5 round mag lol

@dougdishler2086 2 жыл бұрын

Great tip !!!!

@linklesstennessee2078 2 жыл бұрын

Good tip

@luidjicresson1427 2 жыл бұрын

I have a question what is the difference between a 22lr rimfire heavy cannon and a normal cannon??

@alexxu3004 2 жыл бұрын

why not banana mag from cz512

@erniedecker4176 2 жыл бұрын

I have tried and tried and tried and I cannot get mine to hold more than 10 rds. It seems to me the follower is whats hanging on the extension. I'm beginning to think this thing is a pos.

@RandyFinley-bq4wh Жыл бұрын

After I installed the 3 round extension I loaded 13 rounds, but when removed the rounds the follower did not want to return to the top of the mag. What did I do wrong?

@PursuitofAccuracy Жыл бұрын

May be a slight bur inside the mag extension

@jefflayton5889 2 жыл бұрын

How much wear have you seen in your mags with all that shooting? Have you worn any out?

@PursuitofAccuracy 2 жыл бұрын

Nothing ive noticed. Good to go

@craigcampbell3085 2 жыл бұрын

Josh, I’m thinking of replacing my stock on a CZ 452 to a Boyd’s At One. Will I need to install pillars or glass bed it, or is the inletting pretty precise from Boyd’s? I know CZ now sells a ton with their stocks on them but do not know if CZ does some extra fitting?

@PursuitofAccuracy 2 жыл бұрын

The at one is the worst inletted stock ive seen in a long time. My suggestion is to avoid it completely

@TheFowlerAirgunChannel 2 жыл бұрын

What island did you shoot the FX airguns on with Chris..?

@PursuitofAccuracy 2 жыл бұрын

I dont think it has a name. Its just a little island on the intercoastal

@TheFowlerAirgunChannel 2 жыл бұрын

@@PursuitofAccuracy Im a Wilmington native thats why im asking

@dickfitzwelliner2807 2 жыл бұрын

I was hoping it was 15 rounds, but that would require a new spring. I'd love for a 20 round from cz

@PursuitofAccuracy 2 жыл бұрын

Yeah no 15 rounders yet im aware of

@craighoopiiaina8012 2 жыл бұрын

But they do have a 25 rounder, mine came in the mail last week.

@davidneff730 2 жыл бұрын

M&k machine makes 14 round magazines without an extension I have 5 of them not 1 will feed in my rifle

@FLSheepdog 2 жыл бұрын

I have the 25rnd and it does not touch the deck whith my Harris style bipod on lowest setting and boyds pro varmint stocked 457. Runs great.

@Plainsimple67 2 жыл бұрын

@@davidneff730 🤦‍♂️🤦‍♂️🤦‍♂️😂😂😂 sorry man!!😂

@FLSheepdog 2 жыл бұрын

I got 3 of these after seeing your videos. They loaded up fine, took them to the range today and I get 2 or 3 shots out of them and the follower sticks, won't lift any remaining rounds up. Removed the remaining cartridges. Still stuck down. Happened on 2 of 3 mags. Haven't tried the 3rd yet. Already tried multidirectional percussive maintenance. Any tips?

@charliesiempelkamp511 2 жыл бұрын

Pull your springs and check them. That's the problem I had when I bent my springs up. It took a while to straighten them out to where the mags would run again.

@austincrowe5194 2 жыл бұрын

Get a small file and chamfer the internal sides of the mag at the base.

@luidjicresson1427 2 жыл бұрын

hello I have a question the kestrel 5700 ballistics and sufficient for 22lr??

@PursuitofAccuracy 2 жыл бұрын

The 5700 does a great job with 22lr

@luidjicresson1427 2 жыл бұрын

@@PursuitofAccuracy thank you