Dacia Sandero 1.5 dCi drum brake

Рет қаралды 24,903

4 жыл бұрын

For an explanation of drum brakes, here is a useful video: • Drum Brakes
Inner Light by Kevin MacLeod is licensed under a Creative Commons Attribution licence (creativecommons.org/licenses/...)
Source: incompetech.com/music/royalty-...
Artist: incompetech.com/

Пікірлер: 29

@mrm2689 3 жыл бұрын

Thanks for the video well done.

@kika6718 3 жыл бұрын

Can you also adjust at the handbrake ? Where is the nut located in the cabin or under the car ?

@hosuandreiremus 3 жыл бұрын

You can adjust the handbrake in the cabin but you cant adjust the wheels individually. In my case that adjustment did not solve the problem.

@Alanw74 3 жыл бұрын

A little knowledge is dangerous, you have not checked that rear brake correctly at all and it is badly adjusted.

@charafelectroful 3 жыл бұрын

i think that your rear piston push just for one side ''right side at 14:45 '' !!! is that the probleme ?

@hosuandreiremus 3 жыл бұрын

That is not a problem. There is only one piston and it can float around. When the drum is in place it will push both pads.

@scottwilson1510 2 жыл бұрын

Can you confirm if these are same shoes as 2016 duster 4x4??

@scottwilson1510 2 жыл бұрын

1.5dci as well

@hosuandreiremus 2 жыл бұрын

@@scottwilson1510 I don't know. I never worked on a Duster. go on any parts supply website and see if it gives you the same part numbers for both types of cars.

@Porsche996TT 3 жыл бұрын

@4:03 what is the size of the socket?

@hosuandreiremus 3 жыл бұрын

30mm

@Porsche996TT 3 жыл бұрын

@@hosuandreiremus Thanks

@ykesuen 2 жыл бұрын

@@hosuandreiremus Do you know what should be the tightening torque, please?

@hosuandreiremus 2 жыл бұрын

@@ykesuen 280Nm

@ykesuen 2 жыл бұрын

@@hosuandreiremus thank you so much!

@gabornemeth1589 Жыл бұрын

Very good video. It just doesn't show how to reset the automatic setting! When the brake drum doesn't want to come off because it gets stuck in the brake shoes...

@hosuandreiremus Жыл бұрын

I dont know of a way to release the automatic tensioner without removing the drum.

@gabornemeth1589 Жыл бұрын

@@hosuandreiremus You turn one of the threaded screw holes to the threaded tensioner (you can shine a light on the hole), reach in with a thin flat screwdriver, and the ricni can be wound backwards...

@gabornemeth1589 Жыл бұрын

Logan 1.4mpi 2005

@hosuandreiremus Жыл бұрын

@@gabornemeth1589 that is great advice. Thanks!

@bartvermeulen6515 3 жыл бұрын

Old fashion bearings.

@frankhay3459 11 ай бұрын

Firstly you got to know what you doing before attempting to show someone else.

@gerduhig6693 3 жыл бұрын

You have no idea what your at. You definitely haven't fixed that problem.

@hosuandreiremus 3 жыл бұрын

You are correct. Had no idea what I was doing. But the self adjuster was stuck on one side, and that was causing that wheel to have very low braking efficiency when the handbrake was applied.

@AYoung2084 3 жыл бұрын

@@hosuandreiremus You should really have matched tyres on the same axle, not your problem, but just saying.

@Theomba1 4 ай бұрын

@@AYoung2084 I think that could also be the reason for the difference in the stopping power.. Different friction values..