Thank You!

Glad you liked it.

Glad to be helpful. For the tube I used a ballpen refill (easier to clean up a new one) or can be used a segment of extensible antenna.

Nice, I didn't think of an antenna but I used a mechanical pencil tube which worked. Thanks again!!!

link please?

The last one was amazing! I have Hugh problem to make the pro version even work.. but I'm new and this and yeah could need some assistance

yes, see this kzfaq.info/get/bejne/qtSniMJ4x8W2lmQ.html

In theory it is possible but it is needed a bigger gauge for the stacked core. For example if the frame is 26Ga claptoned with 36Ga the gauge has to be 21Ga

Please see this kzfaq.info/get/bejne/qtSniMJ4x8W2lmQ.html but with this mod you don't have to split the gauge

www.aliexpress.com/item/32837249103.html

Here it is something similar multi core clapton with Daedalus pro kzfaq.info/get/bejne/p8ClhZWq0c6YiZs.html . It is all about friction and usually the core wire isn't straighten enough and prevent the gauge to slide easy along the core wire or try to adjust the tension of the wrap wire. I never had such problems, except some experiments, and it is very difficult to give you any other advice.

Hi! I do not use Facebook, send the photos to melcisor@gmail.com

Both version has to be modified in order to do what was intended to do, but pro version less than original. Use as in introductory image the brass guide with the appropriate gauge and you can do all range of clapton from 1 up to 5 cores. I didn't try yet a fused clapton with normal brass guide but should work.

dual core fused clapton

yes

I've done up to triple fused clapton with the v1 definitely possible.