Dakota Digital MLX-series overview

Рет қаралды 30,765

Күн бұрын

0:00 Intro
0:17 Setting the Clock
0:47 Setup and Bluetooth
1:05 Mobile App
1:50 Custom Colors in App
2:11 Expansion Modules in App
2:21 Odometer in App
2:31 Expansion Modules
Dig into the 31 illumination colors; independently select colors for the main gauge reading, message center information, bar-graph readouts and gauge labels, or choose from 12 preset themes! The message centers below the main speed and tach readings offer plenty of information and can be configured to show just what the rider wants to see. Gauge display automatically dims for comfortable night time riding and brightens to a high contrast mode for excellent visibility, even in direct sunlight.
Check them out here: www.dakotadigital.com/index.cf...

Пікірлер: 36

@baddgoat85 Жыл бұрын

I. Need. This. Now

@omarcastillo3801 2 ай бұрын

How do you set up the fuel guage?

@saleemahmedkhan2419 2 жыл бұрын

How to change colours on MLX 2011

@daibish86 3 жыл бұрын

Hi, this may be a novice question but will the MLX-2011 work with my FXBB (I plan on buying a gauge housing) and if so, do you need the small black trip switch button shown in the video or can you cycle through the menu with the OEM Harley trip switch on the handlebars? Thanks

@DakotaDigitalTV 3 жыл бұрын

Thank you for the question, The OEM trip switch on the handlebars will take care of all of the setup and controls in this application. Many earlier bikes will utilize the separate pushbutton, which you've mentioned. Thanks for checking with us.

@Cometocanadabut 2 жыл бұрын

Hello Tech. I had Dakota Digital on my Harley breakout years ago. It looks cool and I liked it. But now I have Road King special with more information like Tire pressure monitor , Reflex Defensive Rider Systems (RDRS) . etc.. Does Dakota Digital will show this info like the stock speedo or not?

@DakotaDigitalTV 2 жыл бұрын

Thanks for the message, The MLX-2011 will perform all of the same functions as the OEM gauge on your new Road King, even with these expanded OEM options.

@riggs_219 4 жыл бұрын

Just purchased a mlx 3200! For my 02 1200 custom. Hard wired everything to my main harness and I run a ultiman 2000i Wich had a tachometer wire running from the module. Everything seems to work fine! Haven't rode with it yet tho, will set it to auto mode and ride for a mile. Is there any certain way I have to ride with it in auto mode for the speed calibration?

@DakotaDigitalTV 4 жыл бұрын

Hello! When using the Auto calibration option, the instrument is simply counting the number of pulses from the speed sensor. As such, stop-and-go and bike speed do not matter. The important things to remember are, don't spin or skid the rear tire, don't creep backwards at a stop and ride as straight as possible for that calibration mile!

@LushikuteZikatojirik 16 сағат бұрын

Quick question, I have a 2013 road glide. I have the MLX 8604 kit installed. Have to set up my odometer asap, but I don’t have a function switch. Perhaps it’s just referring to the trip switch? The 14+ road glides have a function switch on the front side of the bars, however 98-13 do not. I just go to the odometer and hold the trip button to set? I’ll try again in the morning. Just want to make sure I set my odometer before going on my trip

@DakotaDigitalTV 8 сағат бұрын

Yes, the OEM trip switch is used here.

@simonhouel1984 4 жыл бұрын

Hi ! Is that possible to select color for different RPM ranges ? Like : 0 - 1500 : blue 1501 - 3000 : green 3001 - 5000 : orange 5001 - max : red It would definitely look like a NASCAR gauge ... and it is exactly what I'm looking for :-) Thank you guys.

@DakotaDigitalTV 4 жыл бұрын

Unfortunately no, that is not an option, but you can choose the tach warning color for your ideal shift point.

@5pt7art 3 жыл бұрын

Would this work on a rocker c 2008....have a different dash going on so size should work

@DakotaDigitalTV 3 жыл бұрын

Does the new dash accept the stock 3 3/8" gauge?

@AllerFromBloods Жыл бұрын

What’s the name of the app ? And dose it work in Europe?

@motiv8edaesthetics559 Жыл бұрын

Does the MLK 2011 allow you to enter your PIN to start your bike like the OEM speedo on a 2022 FLHRXS?

@DakotaDigitalTV Жыл бұрын

Thank you for the message, Yes indeed, this responds just like the OEM speedometer in this way.

@joek7465 Жыл бұрын

I have an 09 road king flhr will this gauge show the miles till empty on my bike like my stock gauge? And if so what model would I need to make sure that I have that feature. Primarily just looking for a gauge that gives me rpm, speed, trip, and miles till empty.

@DakotaDigitalTV Жыл бұрын

Hello Joe, Yes indeed, our MLX-8604 is the proper model for your bike, which also shows the Miles to Empty function.

@joek7465 Жыл бұрын

@DakotaDigitalTV that model comes up with a 6 gauge set. I'm looking for the single gauge replacement. That has the speedo, rpm, trip, and miles till empty readout... but all in one gauge for the 09 road king flhr

@DakotaDigitalTV Жыл бұрын

@@joek7465 Hello Joe, Sure, take a look at the MLX-2004 on www.dakotadigital.com.

@AG-Cycles 2 жыл бұрын

good afternoon. I bought your mlx 2004 speedometer. The description says that it is possible to display the turn indicators on it, but it is not clear on the wiring diagram how to connect the wires so that the turn indicators work on the MLX-2004. I beg you to help and explain. thanks in advance!

@DakotaDigitalTV 2 жыл бұрын

Thanks for the message Artem, The turn signal indicator connection is made automatically, once the unit is plugged in. The stock computer sends this over as data, so there is not a separate connection which needs to be made.

@AG-Cycles 2 жыл бұрын

@@DakotaDigitalTV thanks for the information! I will try to connect and write. Could you give your technical support email address? Thank you

@DakotaDigitalTV 2 жыл бұрын

@@AG-Cycles Sure, techsupport@dakotadigital.com .

@AG-Cycles 2 жыл бұрын

@@DakotaDigitalTV thanks!

@andnas 4 жыл бұрын

Hello, Is mlx 2000 compatible with softail sport glide 2018?

@DakotaDigitalTV 4 жыл бұрын

Yes, You'll need the MLX-2011 to be exact.

@evergreen.oldboys 3 жыл бұрын

@@DakotaDigitalTV Is that the same model for a 2019 fat bob?

@DakotaDigitalTV 3 жыл бұрын

@@evergreen.oldboys The Fat Bob should be 3 3/8", which would be the MLX-3012.

@DFWKen 4 жыл бұрын

Dakota Digital contacted me via email and got me on track. I couldn't get the iOS bluetooth app to see the gauges. I had the gauges Bluetooth set to Always ON. When I went to iPhone settings, the Dakota Digital gauges didn't show up with the rest of my Bluetooth connections. The app says, "Scanning" and never finds the gauges. I've done Factory Reset, turned Bluetooth OFF and On on the phone, turned Bluetooth ON and Off on the gauges, and have tried just about every other combination I can think of. No joy. If someone could tell me the trick, I'd really appreciate it. (See my reply below for the resolution)

@DakotaDigitalTV 4 жыл бұрын

Hello! IOS does not find any device in the Bluetooth menu. They do NOT need to pair like a Droid. Just turn it on, get our dash into setup and open the DD App. It won't necessarily "look" like they're linked together.

@DFWKen 4 жыл бұрын

@@DakotaDigitalTV My iOS app just says "Scanning". It never changes. I have two Dakota Digital gauge set right now (one is for a friend) and I can't get either to get past "Scanning".

@DakotaDigitalTV 4 жыл бұрын

@@DFWKen Our tech team replied to your email; they ought to be able to get you up and running!!

@DFWKen 4 жыл бұрын

@@DakotaDigitalTV Thank you and they did and I'm up now. NOTE: When first installing the app, be sure to select Motorcycle. The first one that comes up is AUTO. That's the one I selected. Figured that out later so I installed the MOTORCYCLE app. No joy. It didn't come up with the yes/no to share Bluetooth with the device. Deleted the app, turned the phone off, turned the phone back on, downloaded the app fresh install. It works now. I can only surmise that loading the DAkota AUTO first set the phone where it cannot see the Motorcycle device, even if the Auto device app is removed and the Motorcycle app is installed. LOVE IT! Excited to show it off this evening at motorcycle skills practice.