Dana 60 King Pin Bushings & Springs

Dana 60 King Pin Bushings & Springs | 1st Gen Cummins

Рет қаралды 2,629

Күн бұрын

Want to do king pin maintenance but don't want to rip your whole spindle and axle apart?...here's the next best thing. This method will allow you to easily replace the common wear parts such as the spring and bushing under the caps which cause the tires to lean slightly increasing your inside tire wear. Replace the parts within an hour on each side!
Stay tuned for more videos!
Tyler,
*************************************************************************************
SUBSCRIBE:
kzfaq.info?...
*************************************************************************************
SHARE THIS VIDEO LINK: • Dana 60 King Pin Bushi...
*************************************************************************************
BUY THE ITEMS IN THIS VIDEO (AMAZON.COM):
King Pin Bushing: amzn.to/3Mpo5MU
Spring Retainer: amzn.to/39RqQb8
Spring: amzn.to/3MlKhqU
Gasket: amzn.to/3FO5esc
*************************************************************************************
BUY THE ITEMS IN THIS VIDEO (AMAZON.CA):
King Pin Bushing: amzn.to/3yENf6a
Spring Retainer: amzn.to/3laTEOk
Spring: amzn.to/3wfSHur
Gasket: amzn.to/3wepHTM
**************************************************************************************
CONTACT ME:
E-Mail: tylerovens@me.com
**************************************************************************************

Пікірлер: 19

@jasonvogel7566 2 жыл бұрын

Really enjoy your informative videos. Driving and maintaining a 1991. Thanks

@ronsre-creations5289 2 жыл бұрын

Good video ! Looks like time well spent to save those tires.

@101computerman 2 жыл бұрын

I literally just had to completely replace the kingpin bearings on my truck and also changed the top bushings. my lower bearings were toast, didn't have any play but did start making a snapping noise while turning the wheel. before I changed the lower bearings my truck pulled to the ditch even tho alignment said everything was fine now that I changed them it drives straight

@OvensGarage 2 жыл бұрын

Weird things happen when king pins go bad! That'll be another thing I should check separately. Could have pulled the lower king pin out and check the shaft and bearing/race but usually those tend to be okay from what I've seen.

@101computerman 2 жыл бұрын

@@OvensGarage pulling that lower kingpins was an absolute pain on my truck just rust welded into place. But had to be done as that Bering was basically non existent on the driver's side. Yeah they usually don't go bad but I don't think my front axle was maintained very well.

@David-tp7un 2 жыл бұрын

Thanks! I'll get on that!

@OvensGarage 2 жыл бұрын

King Pin Weekend!

@dirtytruckinhippies Жыл бұрын

you are the best

@OvensGarage Жыл бұрын

Cheers!

@ram_diesel_power6039 2 жыл бұрын

So with the no load on the front end. The springs are taking up the slop. My truck has 355k miles on it. It has an 8 ft fisher plow. I gotta replace my bushings. I thought maybe my axles were bent. Know I know my bushings are spanked. Can you list part numbers please. Thanks.

@OvensGarage 2 жыл бұрын

Part numbers are at the start of the video for the spicer numbers, or amazon links in the description box of the video

@masonstruck9006 2 жыл бұрын

I just finished replacing all the kingpin parts, they were Yukon Gear and Axel. After i installed my kit i was doing some more research and found this kit from crane axel. It deletes the spring and replaces it with another bushing, its supposed to last longer than a spring rebuild. Just something else to look into

@bcbloc02 2 жыл бұрын

They wear when you steer as well. I find most trucks need them at about 100K miles

@OvensGarage 2 жыл бұрын

Or 160 000kms for us Canadians 😉

@xc8487 Жыл бұрын

What are your thoughts on spring eliminator kits?

@OvensGarage Жыл бұрын

I haven't had much experience with them but I'm sure they work well for some applications like offroading. I would suspect the ride might be a bit more harsh but I'm not entirely sure. The factory spring replacements are cheap and original that's why I went with them.