Dana 60 King Pin Spring Eliminator Kit Install

Dana 60 King Pin Spring Eliminator Kit Install - Crane Axle

Рет қаралды 41,144

5 жыл бұрын

The Crane Axle SE60 was designed to provide an immediate upgrade to any Dana 60 King Pin Axle. This upgrade provides the ability to handle bigger tires and wheel weight. It also provides much greater longevity for your Dana 60 axle components.
It provides these benefits by eliminating the weak King Pin springs on the top of any King Pin Dana 60 axle and replacing them with the SE60 bushings.
The springs that were designed and used with OEM wheels and tire weights and not engineered for bigger wheels and tires that a lot of off road guys are using. Typically, when upgrading the wheels and tires on a Dana 60 Axle, the stock king pin springs will compress too much causing damage to the existing bushings and other king pin parts. This allows the avoidance of this problem. The solution is removing the springs and placing this kit there instead.
This kit works in ANY Dana 60 King Pin Axle.
If you are currently running a Dana 60 setup with the spring, this kit is for you.
Find the SE60 kit here: craneaxle.com/dana-60-king-pi...
www.CraneAxle.com
Find us on Social:
/ craneaxle
/ craneaxle
Crane Axle
500 W Lytle St
Murfreesboro, TN 37130

Пікірлер: 27

@ronbonick4265 4 жыл бұрын

Subscribed , I'll order this week

@Blakep7704 2 жыл бұрын

Any way to adjust Caster angles on the D60?

@jjkeaton7085 11 ай бұрын

Do i need to run a springless cap with the eliminator?

@bradleymiller7375 3 жыл бұрын

I've got 91dodge w250 4x4, under hood lists states 4000# front axel. Are they Dena 60s? How do I identify? Thanks in advance also informational videos, I'm learning so much, thank you. New subscriber!

@anomilumiimulimona2924 3 жыл бұрын

Look a on the tube to find the bill of materials # then there are plenty of online resources to find exactly what axle you have

@CraneAxle 3 жыл бұрын

This might help. www.cumminsforum.com/threads/how-to-tell-what-front-axle-i-have.1295897/

@midwesthustler 2 жыл бұрын

My steering is only hooked up to the passenger side knuckle on top. The front of knuckles connect both sides together. Could I use the solid bushing and be okay even though the steering is hooked up to one side? Or should I find a way to connect both knuckles from the top instead of the front? I wish I could send a picture on here lol

@Mike-xn1bh 2 жыл бұрын

You shouldn’t have any issues just running high-steer (attached passenger side knuckle to the pitman arm). The solid bushing should be installed on both sides as it removes the weak kingpin spring.

@trevorsorg9347 3 жыл бұрын

Can you use this kit in conjunction with a steering arm lift block? I'm running factory push-pull style steering with a steering arm lift block from rough country, and I'm interested in this kit but I'm not sure it it will work in my situation or not

@CraneAxle 3 жыл бұрын

Yes, it will work. All you are doing is removing the spring and spring seat.

@ronsre-creations5289 4 жыл бұрын

Hi, have a question about your spring elimination kit. Can it be used in conjunction with a bronze bushing instead of the white plastic bushing ? Can it also be used in conjunction with Moog's lower adjustable king pin kit. This would be used in a 92 dodge club cab long bed cummins 4x4. Like eliminating the spring. Ron

@conorayaan5691 2 жыл бұрын

i guess Im randomly asking but does anyone know a trick to get back into an Instagram account..? I was stupid forgot my account password. I love any tips you can offer me.

@cohentadeo3033 2 жыл бұрын

@Conor Ayaan Instablaster :)

@conorayaan5691 2 жыл бұрын

@Cohen Tadeo thanks so much for your reply. I got to the site on google and Im trying it out atm. I see it takes a while so I will reply here later with my results.

@conorayaan5691 2 жыл бұрын

@Cohen Tadeo It did the trick and I actually got access to my account again. Im so happy! Thanks so much, you saved my ass !

@cohentadeo3033 2 жыл бұрын

@Conor Ayaan glad I could help :D

@KeystoneOutdoorsman 3 жыл бұрын

Will this work with a 1st gen Dodge Cummins with a Dana 60 or is this meant for a different application? Thanks

@DestructionDan 3 жыл бұрын

It’ll work. I’m considering doing this over bronze bushings for my first gen.

@1111zeke 4 жыл бұрын

Can you run this kit with bronze bushings?

@CraneAxle 4 жыл бұрын

Yes, but our spring eliminator bushing must be turned down. There is information about this in the instructions.

@jaylee7100 2 жыл бұрын

Hello, does a worn bushing affect the camber alignment? I have a CUCV and the driver side tire is leaning in a little. Thanks.

@FirstGendodgegarage Жыл бұрын

Yep

@20083500HD 3 жыл бұрын

I dont understand why axle manufactures are using ball joints instead of kingpins

@FirstGendodgegarage Жыл бұрын

Money

@BLEnterpriseLincoln 27 күн бұрын

Because kingpins are always trouble, death wobble, spring center pins break, rides like shit, u joint junk. Honestly you get just as much time out of ball joint suspension under normal use as solid axles but much easier to fix. Only thing king pins have over ball joints is durability. Other than that they are no better.