Data recovery on dead micro SD card
Рет қаралды 2,111,231
8 жыл бұрынData recovery on dead micro SD card
Call: 855.366.4232
Request quote here: www.hddrecovery.ca/contact-us/
Micro SD memory cards, just like any other type memory cards, fail all the time. In our case we have a 32GB Sandisk micro SD card that is no longer recognized by any type of device. If your card stopped working, first thing you might want to try is to download a demo version of R-Studio:
PC: www.r-studio.com/downloads/SES...
Mac: www.r-tt.com/?JGKHD000
This software will be able quickly determine if the problem is related to corrupt file system. However, it will not be able to help if the problem is more serious like failed controller or degraded memory component.
For these serious problems there is only one way to gain access to the data, and that is by direct tapping into the NAND chip inside. This data recovery procedure allows us to bypass everything else that is embedded inside of the micro SD memory card and go directly to the source of the memory. But first the circuitry needs to be exposed. For that we use 800 grit sandpaper and water. By slowly and carefully removing the acrylic mask on the back of card we get access to the test points necessary for communication and extraction of data from the NAND component.
Once the soldering part of the procedure is done, we move onto the next step, which is data extraction by selecting an appropriate configuration.
This micro SD card’s file system was badly damaged, but we managed to successfully recover photos that the client wanted. This procedure is a lot more time consuming than a regular SD card, which usually has removable memory. Besides soldering work, this procedure also requires a pinout schematic for the test points as they are not standard. Many different manufacturers and even model might have completely different layouts for the design, and that makes it very difficult simply because pinouts are proprietary. Manufacturing companies do not release these pinouts to data recovery companies.
If you lost your data on micro SD card, and it is important enough to get expert help feel free to contact us here: www.hddrecovery.ca/contact-us/
or call: 1.855.366.4232
HDD Recovery Services
666 Kirkwood Ave, Suite B101
Ottawa, ON
K1Z 5X9
Canada
my gear for soldering:
Microscope: amzn.to/2menRhP
Microscope camera: amzn.to/2mMQdBc
Capture card recording device: amzn.to/2mMTz7t
Soldering iron station: amzn.to/2mMYp4v
Microsoldering iron: amzn.to/2mMTVuP
Rework station: amzn.to/2mwWoJ1
Infrared preheater: amzn.to/2mbMlXo
Flux: amzn.to/2mXJd1b
Wick: amzn.to/2mNr0Xh
Solder: amzn.to/2mtyC0a
Gloves: amzn.to/2mbHWDI
Fume Extractor (mine is no longer available but this is the new version of the same unit) : amzn.to/2mNCmL7
Gear for filming:
small camera: amzn.to/2mNw51T
big camera: amzn.to/2mbW8wJ
If you are interested in learning more about the data recovery in the future subscribe to our channel: kzfaq.info_...
Facebook: / hddrecoveryservices
KZfaq: / hddrecoveryservices
This video: • Data recovery on dead ...
Music: / bigalbeats-1
@ZhengSW Жыл бұрын
Erkin is amazing. He is saving you lots of money by telling everyone to use R-studio or any other data recovery software if your computer can detect the micro SD card. I followed his advice and used the software since my laptop was able to show the micro SD card when mounted and it recovered everything in about 30 minutes. All my precious memories in my photos are safe and I am making backups and buying cloud storage for extra insurance.
@hddrecoveryservices Жыл бұрын
That's amazing!
@ZhengSW Жыл бұрын
@@hddrecoveryservices If the software wasn't able to recover my precious photos and memories from my micro SD card, I would definitely have dropped it off for your soldering skills to recover it haha.
@lakiza55 5 жыл бұрын
They did surgery on a micro SD card...
@fhunter1test 5 жыл бұрын
more like an autopsy
@BillAnt 5 жыл бұрын
In Soviet Russia, the SDcard does a surgery on you. xD
@madheswaran5429 4 жыл бұрын
Hahahahahaah..
@kitkiz6855 4 жыл бұрын
🤣🤣🤣
@emolatur 7 жыл бұрын
For those asking, the device he's using is just a nand flash reader/programmer with a usb interface. They are typically marketed with sockets for flash ICs to be directly plugged into, but if you dig around the interwebs enough it is possible to find one like his with the individual signals exposed, or you can buy one of the socket ones and remove the sockets. It acts as the controller, exposing CE, RB, RE, CLE, ALE, WP, WE, and 8-bit parallel data pins to be connected to the flash memory chip of your choosing. Basically it's a usb flash drive minus the memory chip itself.
@hddrecoveryservices 7 жыл бұрын
very accurate. Basically it is a c controller simulator
@starhopper457 7 жыл бұрын
The interesting thing I'd like to see is the wiring diagram between the storage device and the NAND. How do you know what to solder to what? That is what interests me!
@flames1133 6 жыл бұрын
You sir have just confused me for eternity
@mobilee.r4177 5 жыл бұрын
where can i buy one? share a link ?
@CodeAsm 5 жыл бұрын
@@starhopper457 Me too, so I googled and most repair companies ask you to register (and pay) for access to the pinouts. apperently the pinout differ from board to board and thes repair compaies took all the time and research to X-ray and test to verify the pinout. maybe someone leaked it or somewhere on Baidu... but there are so many diferent pcb's (its basicly a tiny pcb), your change on finding your exact model leaked I gues is small. maybe you can buy it, but a guy like @HDD Recovery Services could afford a memberhip to get direct access to these type of schematic pinouts with knowing their monthly or yearly subscribtion to pay itself back by repairing enough items. "Microsd pinout" did show some... My gues also is, you could risk using a voltmeter in diode mode and knowing some basic electronics to figure out the data lines and controll lines. But I have no idea how to determine wich data line is 0 and up. maybe using a logic analyzer aswell... (I used this method on a unmarket eeprom, did figure it out, but it has a "common" layout once you find some defaults) Microsd is another story tho. This level requires a shop like HDD recovery or alott of experience by oneself first.
@Hazardteam 5 жыл бұрын
02:18 Hello! Which 3M tape was that exactly? I need same, but i don't know which type is (and 3M has ALOT versions of doubleside tapes)
@AshiqurRahman 6 жыл бұрын
my sdcard over heats if I insert it to anywhere...whats the problem?
@koppo2.0 3 жыл бұрын
The sd card lol
@visionofwellboyofficial 3 жыл бұрын
Your sd card has short circuit inside
@thirdfakeofmoon7157 7 жыл бұрын
this is some insane skills
@hddrecoveryservices 7 жыл бұрын
thanks
@berkaycagl3161 6 жыл бұрын
dude really soldering that precise without making bridge needs really awesome skills
@gustavferdman214 6 жыл бұрын
Steady hands that is!
@alpergokcek6756 6 жыл бұрын
Exactly..
@nurlanbekezhan5003 6 жыл бұрын
Алек Георгиев да не только в флюсе дело, но и паяльнике и зависит ещё от прямоты рук
@henrybaker8039 7 жыл бұрын
This is seriously great advertising, nerd porn & great beats. great work and all the best with the business buddy!
@hddrecoveryservices 7 жыл бұрын
thank you :)
@ShaneCarles 7 жыл бұрын
Man, you solder super good. Soldering is an art and you paint solder like Da Vinci paints pictures. I've been doing micro soldering work for 35 years and I can tell you there is a small percentage of people in the world who can solder at this level. Bravo!
@hddrecoveryservices 7 жыл бұрын
wow man! THANK YOU!!! It really means a lot to hear it from someone who been doing this for as long as you have.
@UTIDosDados 7 жыл бұрын
Hi, what kind of solvent do you use in the process of removing the plastic material?
@hddrecoveryservices 7 жыл бұрын
it is just water and 600-800 grit sandpaper
@alexrowland 7 жыл бұрын
Wow. I was in the computer repair industry for about 15 years and considered my skills to be fairly high, but this makes me feel like a total novice. Very impressive. I'm glad to know this type of procedure is even possible, and I'll be sure to recommend you if the need arises.
@hddrecoveryservices 7 жыл бұрын
Alex Rowland thank you
@lifeofdarshit 6 жыл бұрын
Wholy... Soldering under microscope with such precision.
@williambtm1 5 жыл бұрын
You Mr. Narrator are a microelectronic reconstructive surgeon. Well presented and thank you.
@hddrecoveryservices 5 жыл бұрын
Thanks :)
@rondill8429 6 жыл бұрын
I was Impressed with your work!! Great Video!!!
@learnandteach.108 7 жыл бұрын
I would like to say genius. high level of soldering skills, know how to read circuits, really amazing.
@hddrecoveryservices 7 жыл бұрын
thank you Abdullah
@AllmobileYT 7 жыл бұрын
This is wonderful work.Great! :-)
@hddrecoveryservices 7 жыл бұрын
thanks
@siliconrobot6522 4 жыл бұрын
Good result , but I didn't understand what you did exactly after decaping the SD card. Did you byoassed the external SPI interface and directly connect to the physical flash? which protocole you used to communicate directly with the internal flash memory?
@olmo4767 4 жыл бұрын
Beautiful work, very inspiring!
@F4rva 7 жыл бұрын
Cool video, but I would rather watch 20 minutes of soldering and you explaining where you were soldering :|
@santhosh3374 5 жыл бұрын
if he explained everything then what is the probability that you won't open a shop and be his competitor??? or do it yourself at home ?...thats y he didnt explain everything
@santhosh3374 5 жыл бұрын
@@Psyden5757 chill!!! That's just a fact..... And not shutty business mind. It's not a channel like iFixit where their motive is to teach. It's a channel where mr.erkin wants to share his work....so I think you can understand 😁
@santhosh3374 5 жыл бұрын
@@Psyden5757 not a problem
@shahidsehgal4469 5 жыл бұрын
@@Psyden5757 truly he is selling his services and he has right to do it . Zyan carl explained correctly
@SibaNL 4 жыл бұрын
@@santhosh3374 That's a shitty attitude. Knowledge should be shared.
@hddrecoveryservices 8 жыл бұрын
about to do another 32GB unit today
@DavidCoptil 7 жыл бұрын
can you leave a link for what those round pads mean? and a schematic of that adapter please..Thank you,Great job.
@agentgreenland 7 жыл бұрын
David Coptil I'm pretty sure those round pads are the actual memory cells
@hippopotamus86 7 жыл бұрын
Ilannguaq Kivioq No. They are copper contacts. the memory is further inside the plastic.
@Ozziepeck11 7 жыл бұрын
why would you think those pads are the memory cells....
@sorh 7 жыл бұрын
memory cells? you have no ideia what your're talking about..
@atomx2323 6 жыл бұрын
Great information, cant believe you give away this knowledge for free! great respect
@roundcore 6 жыл бұрын
Amazing. Thank you for sharing. I did not know that could even be done. When it comes to storage what is your best advice, HDD, DVD, or USB? What is the most reliable?
@mediocreindoman8041 7 жыл бұрын
God of recovery, can you recover my ex's dead heart?
@mediocreindoman8041 7 жыл бұрын
LOL, nice one
@hddrecoveryservices 7 жыл бұрын
I am really stoked to see jokes pop up in comments :)
@weareeducated1713 6 жыл бұрын
Dedi Rosandi might be he can recover :D
@St0RM33 6 жыл бұрын
Only if you can find that rare flux that allows you to solder her broken pieces back together!!
@user-jp1yd2ut9r 5 жыл бұрын
carnt recover what dident exist to start with
@awilliams1701 4 жыл бұрын
This is freaking ART!!!!
@kiringogichanga 5 жыл бұрын
What simple solution for such a complex problem...damn! Thanks stranger.
@SURGE101 4 жыл бұрын
This is amazing to watch, loved the video.
@hddrecoveryservices 4 жыл бұрын
Thank you so much
@COMMANDOF4F4 7 жыл бұрын
THANK YOU FOR THE HELP MAN. YOU HAVE SOME STEADY HANDS THERE. I USED TO BE STEADY LIKE THAT, BUT IM 73 YEARS OLD NOW AND WAS A PRISONER OF WAR FOR 13 YEARS IN SOLITARY CONFINEMENT BEING BEATEN AND TORTURED EVERYDAY. I MUST DESIGN TOOLS TO HELP ME HOLD TOOLS TO KEEP THEM STEADY.
@jakereason8095 7 жыл бұрын
Hi.How were you able to determine which unmarked pad corresponded to which pin on the controller? Is there a standard convention SD cards follow, known impedance values, etc? Also, is the gel that you applied before soldering flux? From my limited knowledge, I know flux is liquid so I'm not sure... In any case, you just got yourself a new subscriber.
@joshenders 8 ай бұрын
Curious as well
@pablomartino3514 5 жыл бұрын
Esto es una locura! Realmente admirable el trabajo de medico cirujano que haz ejercido.
@wilsonpereira5432 4 жыл бұрын
Amazing dude! Thanks for the video. You´re the man! Good job!
@NoNamenoonehere 7 жыл бұрын
thanks for the guide it worked
@jeremyp5027 7 жыл бұрын
my god, you actually did this.
@Caleb5617 7 жыл бұрын
Jeremy Parsons With a little time and the right tools it wouldn't be excessively difficult. As you saw, once you know what to do the soldering would probably be the most difficult part.
@steva7159 7 жыл бұрын
ＣＡＬＥＢ５６１７ you need really steady hand,otherwise this would be very tiresome and stressful.
@RajaRam-vt9ev 7 жыл бұрын
+Steva Мађија g77 8y7
@RajaRam-vt9ev 7 жыл бұрын
+Steva Мађија g77 8y7 q0qa
@MrBa5ti 7 жыл бұрын
i understand the controller on this sd was broken... where did you get the pinout of the PCB from? is it a standard pinout they all use?
@hddrecoveryservices 7 жыл бұрын
it is the standard pinout for Sandisk 8bit layout.
@MarceloSPatricio 4 жыл бұрын
@@hddrecoveryservices can you give some info about the board you used to sold the sd card? please?
@boudrass 7 жыл бұрын
i have one question to you where did you learn that ? can i ask you for more detail ?
@hddrecoveryservices 7 жыл бұрын
I started recovering hard drives, then moved onto flash memory, then started to work on monoliths
@boudrass 7 жыл бұрын
thank you . for hard driver did you using recovery equipment like pc3000 or mrt ; or just use program like WDR . i know it's kinda secret ,but can i ask you how i can learn that method that you are using ? .
@hddrecoveryservices 7 жыл бұрын
I use both PC3K and MRT. Never used WDR You can learn it by reading the manual, or you can pay for training
@boudrass 7 жыл бұрын
I think MRT more powerful and can do all the job , but too expensive . i'm from Algeria , i wish to buy this stuff good skills , nice work . thnx bro
@IDroptMyGun 5 жыл бұрын
Ive only recentlly subscribed but have been watching all your videos very intentlly and have used some of what ive learned to successfully recover data off a few hhds and an old usb pen drive. this may seem mundane and boring to others but i find it fascinating. Thanx for all the great instructionals and ill be watching for more
@chandrajugil2151 5 жыл бұрын
What
@tro7e 7 жыл бұрын
so it wasn't a clickbait... disappointed.
@Goultek 5 жыл бұрын
are you serious???
@usucktimmy6776 5 жыл бұрын
Nigga stfu your a barcode
@mattmoreira210 7 жыл бұрын
10:24 "good, half, small good, small half" Gotta love some chinglish. Hahahahah!
@RangieNZ 4 жыл бұрын
I do similar, when you need multiple versions of the same file, e.g. for websites where you may have a full image and a thumbnail.
@warwickbaines-bennett7721 7 жыл бұрын
Do you have any tips/advice if there is a short on the reader pads? The one I'm working on seems to have a small nick in one of the readers and does get very warm quickly. It's a sandisk 64gb cruzer blade. Is there a way to fix the short and negate having to extract data this way? It's one of the modern sandisks memory sticks with no board or parts just the flash style memory. Thanks.
@akisi1401 5 жыл бұрын
Look u have no idea how amazing teacher you are. Please please make a complete tutorial course on data recovery . Ur the best
@odomobo 7 жыл бұрын
Have you ever considered becoming a neurosurgeon?
@HentaiNat 5 жыл бұрын
Doing that on an atom.
@_F_I_E_R_C_E_ 5 жыл бұрын
That requires a lot of skill and patience
@msfilho 5 жыл бұрын
WTF! Extremely specialized service. Excellent JOB!
@hddrecoveryservices 5 жыл бұрын
thank you man!
@videolabguy 4 жыл бұрын
Where does one find the pin out information for the pads you exposed on the card? Is this a standardized pattern?
@hddrecoveryservices 4 жыл бұрын
It is standardized for most SanDisk mircoSD cards. PC3K flash and Rusolut provide schematics for many common cards once you buy their equipment
@vdrhussar 7 жыл бұрын
DUDE, That's awesome!
@hddrecoveryservices 7 жыл бұрын
thanks
@amrohendawi6007 5 жыл бұрын
beautiful work !!! but why dont you design a simple standard micro sd card reader and save the soldering time and stress ?
@ulfen92 4 жыл бұрын
How do you suppose that would work? Its not possible to use the standard uSD contacts to read the contents on the NAND-memory if the controller or something else is broken.
@pentestingshop9194 3 жыл бұрын
Nice work! I would like to know where did you buy that red jumper wire? Or what's it called?
@FunkyBlueMonkey3 6 жыл бұрын
That's super impressive. Great job.
@hddrecoveryservices 6 жыл бұрын
thanks Kevin
@archgloom 7 жыл бұрын
so basically you're soldering new memory controller ? right ?
@damianpc1 7 жыл бұрын
Trollers gonna troll Yes, he is.
@hddrecoveryservices 7 жыл бұрын
Next week looks like a Sandisk land form me
@Interestingworld4567 6 жыл бұрын
HDD Recovery Services Where are you from bro? I may need some help in some future.
@Naxxx.110 5 жыл бұрын
My sandisk & hp simulatenously failed today. I am semi-devastated. Which brand sd is most reliable?
@Angel24112411 5 жыл бұрын
Samsung "Pro" series.
@zapador 5 жыл бұрын
@@Naxxx.110 SanDisk is widely considered to be the to-go for professional photographers. Make sure you get a real SanDisk from a reputable vendor and not a cheap knock-off.
@Naxxx.110 5 жыл бұрын
@@zapador no its original man. Serial number matches as told by hot line, but out of warranty
@QOSQualityofSpeed 4 жыл бұрын
Anything to do if there is a direct short between the two power pins? Another words you're not getting a number like you said in the video but you actually are getting a tone?
@codyayre4554 7 жыл бұрын
I have a similar issue with a 64gb SD memory card, had t sent off to another company and was quoted an astronomical recovery fee. I understand each device presents its own challenges and issues, but what would you estimate/quote for a recovery of this level?
@afloyd4976 7 жыл бұрын
Mad soldering skills! What soldering iron and tip did you use?
@hddrecoveryservices 7 жыл бұрын
its a Hakko FM-2022 iron, comes as one with a dip, great stuff for micro work
@rafapyp5868 5 жыл бұрын
Search for that model results in tweezers, not iron tip. www.hakko.com/english/products/hakko_fm2022.html
@haha123trololol5 7 жыл бұрын
Great job! But I hope I'll never need a service like this ;)
@marcofigueroa7131 4 жыл бұрын
This is flash extractor? where did you get al the diagrams for the circuits to know how tu put the cables . Tsop 48 adapter is for sd cards and micro sd cards?
@sashoxxx 5 жыл бұрын
Hey man can you please tell me where to find the beat/sample you used in the video (from the "Times of My Life" track by Hoood) - Can't find it anywhere! Would really appreciate it.
@TylerSteven9 7 жыл бұрын
1:17 you need professional help 😂
@hddrecoveryservices 7 жыл бұрын
:) its true doe
@user-cu6cq2ye4v 7 жыл бұрын
Первые несколько слов - сразу услышал знакомый акцент)
@The14Some1 5 жыл бұрын
Я тоже сразу услышал и полез смотреть, прав ли я. Подтверждений не нашёл, но расслышать это невозможно :) П.С. Шпрехает он конечно зачётно.
@Romankv 5 жыл бұрын
еще бы он пред этим тестом показал что карта не рабочая и по усб не определяется.
@MarceloSPatricio 4 жыл бұрын
Cara, eu não falo russo, mas o assunto de vocês está muito divertido!
@Ckat220 4 жыл бұрын
Он жил у нас более 15 лет
@user-yq8uh8gw2y 4 жыл бұрын
я плохо понимаю английский и то тема родная что понял каждое слово.
@mikejb2009a 6 жыл бұрын
Incredible.... Thanks for showing us how it's done and what's inside the card.
@vincenzodigrande2070 2 жыл бұрын
Hah, I've managed to get a 64gb micro SD card working again today by sanding it down, I only had 400 wetndry paper, but I went really carefully under the microscope, then I noticed some copper traces had black spots on them, and one even didn't measure any continuity. Then I stripped an old headphone wire, which has those super thin enamel copper strands and soldered it in place with some flux and it brought the card back to life! I quickly made an image and copied it on to a new card off course. Thanks for the insightful video!
@hddrecoveryservices 2 жыл бұрын
Amazing bro
@ThisDJ808 7 жыл бұрын
Soldering is virtually impossible. This guy is skilled.
@hddrecoveryservices 7 жыл бұрын
thanks, but with good soldering tools and good microscope it is more than possible, specially on pads this big
@ThisDJ808 7 жыл бұрын
HDD Recovery Services I once spent hours and hours attempting to solder a USB broadband dongle. I couldn't get a single connection to stick to the board. The solder just kept wobbling off. I eventually killed the whole thing by burning it. Guess it takes practice!!
@hddrecoveryservices 7 жыл бұрын
I've been soldering for a while, but yeah practice is probably the main key, but only paired with good tools. I worked with shitty tools, and trust me you get what you pay for with soldering equipment. That being said Hakko equipment is not even that expensive to be honest
@ThisDJ808 7 жыл бұрын
HDD Recovery Services Yea I was using a £9.99 Soldering iron. That probably explains it!!
@hellterminator 7 жыл бұрын
+craigyb check23 Possibly, but solder not sticking at all sounds more like flux issue.
@twistdshade 7 жыл бұрын
If I was doing this for a living, I would probably have some type of chemical solution to dissolve the black plastic casing of the SD card to expose the copper circuitry on the back. I would then have some kind of solderless contact-based device that the card would slide into, or placed onto the card, in order to make the proper contacts to the circuitry of the SD card. This would eliminate all risk of physically damaging the card from sanding or soldering.
@hddrecoveryservices 7 жыл бұрын
twistdshade that is a great plan, we are working on adapters for them right now actually. I don't want to mess with chemicals to be honest. Laser is another way to remove the acrylic but in all the time I spent doing this I have never damaged anything with sandpaper. But push to connect adapter would definitely be great!
@twistdshade 7 жыл бұрын
dissolving the back with chemicals would take less man-hours than carefully sanding it down. It wouldn't take much of the chemical either since the micro SD cards are so small. Anyways the reduced man hours would mean you could charge less money for the service too. I'm not really looking to recover any data. The video just came up, and it was pretty interesting. Really great idea for promoting your business. Thanks for posting this, and thanks for the reply.
@hddrecoveryservices 7 жыл бұрын
these chemicals would also be very toxic, and hard to filter fumes that they create. That would be my main concern. Laser would be best option to cut time, and minimize risk, and not create health hazards.
@hddrecoveryservices 7 жыл бұрын
something like this would be great kzfaq.info/get/bejne/otOPmq2j1dylXas.html
@twistdshade 7 жыл бұрын
looks like a really painful way to get a tattoo.
@johandiaz4982 5 жыл бұрын
I have a question, I have a sd card broken literally but the middle part with the dots is ok, is any posibility to recover data even if the silver contacts are separated, I mean the visible part of the sd card?
@hddrecoveryservices 5 жыл бұрын
highly unlikely
@MasterMindmars 6 жыл бұрын
Amazing. Which product or solvent did you used? Thanks
@G8tr1522 6 жыл бұрын
5:48 you are a god Bc it still worked after that large blob. Seriously, that thing should've melted. Did you use 100% lead solder?
@hddrecoveryservices 6 жыл бұрын
with good flux and good solder, it is easy to clean up the blobs like this. I use this flux amzn.to/2mXJd1b and 60/40 solder by same guys who make it here in Ontario amzn.to/2mtyC0a
@DanielSmedegaardBuus 7 жыл бұрын
I never knew there was such a thing as a soldering ninja. Now I know better 🤠✊
@hddrecoveryservices 7 жыл бұрын
haha
@tommychiuks 2 жыл бұрын
Really enjoy you HDD recovery channel. Learn alot from it too. I wonder if you could give some advise on my problem Kingston 128GB micro SD card here. For some reason it become read only memory card. I am unable to removed the write protection. Tried to format on android phone, mac and also windows all unsuccessful. Tried on different card readers also not helping. Use all the tricks online like using cmd, third party software to disable the write protect, all failed. So can I assume I have a faulty card? All the data inside are still readable just that I am not able to write to erase them. Hope you could give some advise on this. Thanks
@stevewells2327 3 жыл бұрын
Great therapy !! Keep em coming. Brit in Malaysia.
@tabcreedence6553 5 жыл бұрын
Great job on the recovery wow that's some terrible music
@Gordon302 7 жыл бұрын
Irfanview is a really good photo viewer. However, I never was a fan of that default, "squashed cat" (Or, is it a raccoon wearing a mask?) icon.
@voxelfusion9894 7 жыл бұрын
Gordon302 my school has it installed by default, so that piece of roadkill is always an unpleasant sight.
@Huizelogica 7 жыл бұрын
i actualy like it :) and as stated in the FAQ : A: This is a red CAT, a road cat. Note, I like cats, but this is a joke ;-)
@hddrecoveryservices 7 жыл бұрын
yeah, I never got the point of that icon either
@DrTune 7 жыл бұрын
That was a nice soldering job. Can you recommend an iron/tip for that scale work?
@hddrecoveryservices 7 жыл бұрын
I added list of gear I use for this stuff in the desciption
@Gary-Seven-and-Isis-in-1968 3 жыл бұрын
Very impressive indeed. There are so many different reasons for loss of data, especially photos. Most of us use our phones for photography these days and if you've lost your encryption key then nothing can be done. All is lost.
@TarunSingh-jm8wy Жыл бұрын
If micro sd card is broken into two pieces, is there a way to recover data from it?
@Gary-Seven-and-Isis-in-1968 Жыл бұрын
@@TarunSingh-jm8wy That is not my problem. I mentioned a lost encryption key.
@toysareforboys1 7 жыл бұрын
What's the cost for this type of recovery?
@vickyr225 7 жыл бұрын
Chawanni
@mwbgaming28 7 жыл бұрын
too much
@hpdeskjet2596 7 жыл бұрын
a new sd card, table, house(maybe) and a lot in fire damages
@mwbgaming28 7 жыл бұрын
creepy fucker
@svenhoek 7 жыл бұрын
3 sheckles
@stephaneedwardson1370 7 жыл бұрын
Great video! Very informative. But don't ever again play that music while soldering... :)
@sadiaani6912 6 жыл бұрын
casey neistat vibes,right ?
@itsmetorque 5 жыл бұрын
Stéphane Edwardson fkn shity music
@StefanReich 5 жыл бұрын
Cool music
@Motivational_Sagar2023 4 жыл бұрын
sir, what device you have used to interface the SD card(after solder) with your PC
@EdTube444 7 жыл бұрын
My hat off for the soldering technique. I wish I had ever been that good. However have you considered just making a mask with perhaps silver contacts that you can just press or lightly clamp over the spots you are soldering the wires to? It only needs to work for the time it takes to recover the data. Seems a lot less risky that soldering. Perhaps solder tiny silver disks on wires, position them over the same spots you soldered too, and then clamp it. Just an idea.
@arjaysmithjr9083 2 жыл бұрын
My hands started shaking just watching this. Sweating copper pipe. YES. This? Not in a million years.
@darcsystems 7 жыл бұрын
that tshirt looks like something you got free in a case of beer
@hddrecoveryservices 7 жыл бұрын
darcsystems haha, that is exactly where I got it from. Moosehead ;)
@darcsystems 7 жыл бұрын
;) I have the same one. Love me some moosehead. :D
@michaelparker2449 7 жыл бұрын
I've got a card from about 8 years ago with a video I really want back but every data recovery tool failed so will give this a try, but my hands have the finesse of a potato so I'll have to cut back on the coffee before doing any fine soldering.
@Crimoni 7 жыл бұрын
Very useful tips. I will certainly try this next time I have to solder.
@themachinesmith411 7 жыл бұрын
mstrfool I have no way to copy your text so replying to come back to it later... good info!
@gauramos4579 Жыл бұрын
It really worked for me after I look and try some tutorials, yours is the one that worked. Owe you a lot.
@EAPoeProductions 6 жыл бұрын
Well done video! I have no defect sd cards but a usb stick that none of my hardware can detect. I´ll have a closer look to your video showing how to handle dead usb drives.
@38fade 7 жыл бұрын
This great I know to sand the card ,but no explanation as to what I am soldering!
@hddrecoveryservices 7 жыл бұрын
you would need to know the pinout for the soldering (which contacts go where), but we do not reveal them unfortunately
@38fade 7 жыл бұрын
Fair enough, still a great video :)
@absurdistcat 5 жыл бұрын
www.interfacebus.com/MicroSD_Card_Pinout.html www.hobbytronics.co.uk/pinout-microsd This is probably it. Easy search.
@drdschn 5 жыл бұрын
no.
@SharkStrikeAC 7 жыл бұрын
Alcoholics do not try this
@thealternativej7994 7 жыл бұрын
Because. You will probally get sued depending on who your dealing with.
@rochr4 7 жыл бұрын
shaky shaky shaky, I need a shot.
@HelloKittyFanMan. 6 жыл бұрын
They don't, Alli? How do ya figure ya know that?
@HelloKittyFanMan. 6 жыл бұрын
Hey, Alternative, I have two questions: 1. Which one of their possessions were you referring to as dealing with? Depending on who your _what_ is dealing with? 2. Just because, period? Because what? Oh, just clarify for me to help me understand you better: Did you mean to use a comma instead of a period there?
@yuyirock 6 жыл бұрын
Hi! I bought a Kingston sd card on ebay and its damaged, the files are corrupt. I can only watch some but the others I can't. I have music shows that I want to recover. Is this possible?
@smartech-assistenciatecnic4233 4 жыл бұрын
Very nice, it's good to see data recovery like that. Do you have online courses too?
@cafeespresso99 7 жыл бұрын
interesting video, spoiled by an amazingly bad choice of background noise
@hddrecoveryservices 7 жыл бұрын
the music?
@cbr7170 7 жыл бұрын
yes haha
@pifandrei5743 7 жыл бұрын
cafeespresso99 what the hell are you talking about? is perfect for those kind of videos. what would you prefer? destiny's child or i dont know , the titanic song theme? :))
@cafeespresso99 7 жыл бұрын
+HDD: Yes, the music
@qodeshgraphics 7 жыл бұрын
I actually felt the same way. Once the music began, it was so annoying that I had to shut it off.
@chad_dogedoge 7 жыл бұрын
how can you do that , very nice skill
@hddrecoveryservices 7 жыл бұрын
Thanks a lot!
@caboseisstupid 5 жыл бұрын
If you end up doing these regularly, try putting the sandpaper on something flat like a glass panel, and then place something to serve as a backboard so you don't sand off the exposed contacts, then run back and forth to evenly remove the screen from the bottom without as much risk to the edges.
@imaweirddude 7 жыл бұрын
what kind of wires are you using and what reading device are you using?
@Allroundfixer 7 жыл бұрын
I stopped looking becourse of the very annoing not necessary background noise. I don't understand why poeple do this.
@PixelSchnitzel 7 жыл бұрын
Ugh, that music was unbearable torture.
@CattoRayTube 7 жыл бұрын
I for one actually enjoyed the music, and am glad a link was provided in the description.
@GenesGripChannel 7 жыл бұрын
Pixel Schnitzel I liked it
@meetmiri5521 3 жыл бұрын
is it possible to recover data when there is a crack in the micro SD? Also it gets hot when I insert it in the card adapter.
@gurindersingh7933 6 жыл бұрын
Your efforts are so worthy and meaningful
@Rockworksbyashish 3 жыл бұрын
Bro I have a doubt your eyes is real ??
@vinylmodsmanitoba 5 жыл бұрын
10/10 shakiest camera ever, but you did a good job with the MicroSD. You should consider actually explaining the entire process of recovering the data instead of glossing over the process. Your not going to lose business by showing people this, in fact it will just put emphasis on how going to you is the better option because people are lazy and would rather someone knowledgeable do it for them.
@GustavoGlv 4 жыл бұрын
Great job, thanks for the example.
@user-ox5dc7hh5o 3 ай бұрын
Are the components of the micro SD card, such as the NAND cell and the controller, separate or integrated together?
@Auberge79 5 жыл бұрын
hmm... without PINOUT and tools used this turns to be just an ad for his business, not more. I hate ads :(
@BillAnt 5 жыл бұрын
That is correct sir! ;D
@ToeCutter454 4 жыл бұрын
need to look up the "monolith" or "chip-off" data recovery, you'd have to have data sheets on the pin-outs for various cards as i'm sure they change with each variation and manufacturer, though you should be able to find all that on google or through the manufacturers websites. if it was put into digital format and is on a computer hooked to the internet... it can be found...
@fernandorizo9413 7 жыл бұрын
the music makes my brain hurt! is so badddd!
@reviewhelp8360 6 жыл бұрын
Fernando Rizo check out this video. kzfaq.info/get/bejne/e9yflbdlt7GlYo0.html
@hectorrubenlunadeleon7612 4 жыл бұрын
Very good your videos man, greatings from guadalajara México.
@thomasciciyan6708 4 жыл бұрын
VERY nice job, dude...! thanks.
@realcygnus 7 жыл бұрын
dooshy music but serious skills
@mohgujai 7 жыл бұрын
God awful music, too loud and sounds like a broken record.
@pjg9463 6 жыл бұрын
Hip Hop
@tacoengineer6660 5 жыл бұрын
wow you're garbage
@jm036 5 жыл бұрын
@@tacoengineer6660 Fuck off kiddo.
@wiky1492 5 жыл бұрын
pfft millennials who like trashy trap musics, this music is better
@tacoengineer6660 5 жыл бұрын
@@jm036 Calm down. No need to act like a 8 year old who likes to cuss at others over music on a KZfaq video
@SkeletonOfAnAngel 5 жыл бұрын
This is beautiful.
@antino8502 Жыл бұрын
Yours is art!! For those without that talent, is there an easier way to fix this? Six years have passed, a device capable of reading damaged micro sds will have come out.
@hddrecoveryservices Жыл бұрын
There are quick connection adapters now that save time on soldering, yet the recovery process from the NAND is still a complex procedure which can't be done without very expensive tools in addition. NAND recovery can't get easier, only more complex. Devices are not getting easier to work on.
@antino8502 Жыл бұрын
@@hddrecoveryservices I always follow you with admiration. I have seen adapters but you always need experience and skill. I don't have either of them. Now I have a micro sd that doesn't love me and has abandoned me.
Anyaischuk LIVE
Рет қаралды 13 МЛН
HDD Recovery Services
Рет қаралды 13 М.
Louis Rossmann
Рет қаралды 334 М.
DIY Perks
Рет қаралды 12 МЛН