Davis Crane liebherr ltm1400 set up and work, ( Full video )

Рет қаралды 122,072

3 жыл бұрын

Dynaten scheduled Davis Crane's 1400 to be set up for atleast a month
first was to fly out the demo then start fly in all the new components.

Пікірлер: 47

@jamescaliendo1030 2 жыл бұрын

We had 2 1350's they were replaced by 1450's, but never a 1400. Beautiful machine and great video. All the crane videos I see are always overseas, glad to see one here in the states

@MrBillFold 3 жыл бұрын

Don't forget to write down Worked Thru Lunch and Breaks.

@russellpeffer7736 Жыл бұрын

Great video. Sometimes I'm a driver/rigger or the assist crane. I think they're amazing but it's so much work to assemble, sometimes for 2 picks. I'd much rather stick with the smaller cranes personally.

@David-yy7lb 5 ай бұрын

I would love to see how new winch cables are put on their crains and also how much is that crain per hour

@just_some_bigfoot_hacking_you 3 жыл бұрын

13:46 nice shot, mate

@mingming9604 3 жыл бұрын

amazing! I never get tired of seeing a full luffing jib. I have the 1/50 models of the smaller and bigger brothers 1350 and 1500 with luffing jibs and never get tired at looking at them even though they are only 2.5m or so.... the real thing is always better ;)

@ellafarm6209 3 жыл бұрын

Great Video Jason!!

@Rk-ru6yc 2 ай бұрын

Good job

@ChannelAlatBerat 2 жыл бұрын

Good work

@laurentguillevic3336 3 жыл бұрын

very nice the video

@eddiecongdontrucking Жыл бұрын

So badass

@soeren66 2 жыл бұрын

nice Video 👍

@MimiDiessel 3 жыл бұрын

Thanks for sharing and I have just subscribed your channel to my new friend. Have a nice day

@niklscalemodel 3 жыл бұрын

Thank you, tell your friends I don't get much traffic on here unfortunately 😕

@joserobertopereira1878 2 жыл бұрын

Vídeo com muito detalhes

@hamzalayri1097 3 жыл бұрын

Make us videos on how to program the computer 😍

@blakpink7777 10 ай бұрын

❤❤❤❤

@weldersandblaster 3 жыл бұрын

What was his max radius and load? Thanks for sharing. I liked to see how much work went into just setting up to be ready to lift.

@Guds777 2 жыл бұрын

A unit like this can go up to 4 ton. Probably around 25-30 meters radius...

@to_theroof 11 ай бұрын

Fantastic video. Im curious do you always stack 2 10’s on one side of base plate like that?

@niklscalemodel 11 ай бұрын

Yes most of the time unless we can only get 1 truck at a time to the crane

@ryanburbridge 3 жыл бұрын

Well done! Union shop?

@niklscalemodel 3 жыл бұрын

Yes local 178

@sampetersen1994 Жыл бұрын

Do you guys have to dolly up the boom when you travel down the road?

@niklscalemodel Жыл бұрын

Not really unless we go to certain counties which is not often

@niklscalemodel 3 жыл бұрын

Skip to 5:00 for the second half of the video if you have seen the first half.

@rogerbelger2014 3 жыл бұрын

Jason are you possibly missing any drone accessories ? I found some in the guardhouse last year.

@niklscalemodel 3 жыл бұрын

@@rogerbelger2014 what kind I broke mine need a new one

@rogerbelger2014 3 жыл бұрын

@@niklscalemodel i will check , i put them in a box, in building 2, should still be there...

@niklscalemodel 3 жыл бұрын

@@rogerbelger2014 ok cool let me know, maybe there is one I can get some parts from to fix mine

@dzmitrypasrednik2325 3 жыл бұрын

Why do they put a lattice attachment instead of using a telescopic boom on its full extension?

@Brian_P 3 жыл бұрын

This crane has 197 feet/60m of main boom. They are designed to work with luffing jib for height/long radius and heavy closer lifts on main boom. This job would be impossible with main boom since the longest telescopic boom is around 330'/100m. You need to have verticle height as close to verticle/90° as possible to keep the crane close to the building. Luffing jib allows you to achieve great a radius while keeping the boom clear of the building as the luffing jib articulates on top of the main boom. While the main boom generally stays at a 70+ degree angle the jib can luff up and down to achieve the radius and height needed.

@dzmitrypasrednik2325 3 жыл бұрын

@@Brian_P Thank you for the explanation!

@user-ie9hz5ye6n Жыл бұрын

انه ساق رافعه ولدي شهادة من شركات أجنبية انه من العراق واوريد العمل في الاتحاد الاوربي

@matthewpitts9094 Жыл бұрын

What’s the song at 7:28

@niklscalemodel Жыл бұрын

I don't remember will try and look it up

@MrListo_818 9 ай бұрын

Quick question for those who have both their class A & NCCCO..I got my class A looking foward on getting my NCCCO license. Is it worth it doing it on my own or im i better of going threw a union? My thought is just getting it on my own & applying to union jobs with both of my class A & NCCCO licenses cuz i know alot of jobs have seniority & wont give a chance to new guys..

@niklscalemodel 9 ай бұрын

Just join a union and train there for free then take you test. Best practice is on the job. If your in the dfw area we need drivers. Then you can see how things operate and train for your test.

@MrListo_818 9 ай бұрын

Thanks for your help im from Southern California do you know any union crane jobs around here in socal?

@MrListo_818 9 ай бұрын

@@niklscalemodel dfw area u mean dallas?

@niklscalemodel 9 ай бұрын

@@MrListo_818 yes

@nigellewis804 3 жыл бұрын

Please loose the music

@niklscalemodel 3 жыл бұрын

I hate finding music for videos

@ryanburbridge 3 жыл бұрын

Take off the damn masks though

@niklscalemodel 3 жыл бұрын

Had to per job site. Funny thing is I got covid and was severely sick fir 2 months working on this site

@ryanburbridge 3 жыл бұрын

@@niklscalemodel you don’t have to. You choose to. I understand why people choose to but it still makes me angry. I got fired over all this covid BS. Thanks for posting the video.