Dayton Audio DSPB Amplifiers - Customize Your Sound

Рет қаралды 28,533

4 жыл бұрын

BEFORE YOU BUY! Check out the user manual to make sure you get everything you need!
www.parts-express.com/pedocs/...
PRODUCTS 👇
----------
DSPB-250: www.parts-express.com/--325-126
Dayton Audio DSPB-250 combines a 2 x 50W amp board with the ADAU1701 digital signal processor which enables you to customize sound using SigmaStudio software and Dayton Audio ICP1 Bluetooth programmer. Use the DSPB-250 as the heart of your DSP audio project, or combine it with the KAB-250v3 to make a Bluetooth DSP 4-channel project.
DSPB-100: www.parts-express.com/--325-135
Dayton Audio DSPB-100 combines a 1 x 100W amp board with the ADAU1701 digital signal processor which enables you to customize sound using SigmaStudio software and Dayton Audio ICP1 Bluetooth programmer. Use the DSPB-100 as the heart of your DSP audio project, or combine it with the KAB-250v3 to make a Bluetooth DSP 2.1 channel project.
ICP-1: www.parts-express.com/--325-132
The Dayton Audio DSPB-ICP1 allows you to unlock the full potential of your DSPB amplifier or preamp boards by connecting them to the easy to use, Analog Devices SigmaStudio visual programming tool. This allows you to set precise EQ, crossovers, do time alignment, bass enhancement and so much more to truly fine tune your project.
SOCIAL MEDIA:
Follow us on-
Twitter:
/ parts_express
Facebook:
/ parts.express
Instagram:
/ parts_express
Subscribe:
kzfaq.info...

Пікірлер: 27

@balladbuster5109 2 жыл бұрын

Bought the all in one 2 30. Can't wait. Greetings from Kenya 🇰🇪

@matthewmassey2333 4 жыл бұрын

Thank you for making this video it has been much awaited. I just purchased dsp250/100 and have 2×kab30(best mini amp) I have to ask as nobody on tech staff has been able to answer. What is the advantage of the 2×50 Over the 2×30 it clearly seems to be rated for more power,at a lower voltage & higher impedance but still stable down to 4ohm? Is THD better? To sum up what I have noticed the 2×50w seems to be a better amplifier for higher voltage. You have done the DIY community many great services 👍

@thasickest 3 жыл бұрын

you guys need to make an app to integrate REW and Sigma, that's what 99% of people need from this.

@ClaritoneAudio 3 жыл бұрын

Can you recommend a back plate that i would connect this to ? for a small studio monitor lets say

@brianterrill9587 4 жыл бұрын

Hi there. For the KAB-215 amplifier I've seen 3 DIFFERENT power profiles. 24V @ 4Amps, 19V @ 1-5Amps and 12V @ 1Amp. Which ONE is correct??? Because UNDERpowering a board is just as bad as OVERpowering a board. Thank you.

@dobsonator 3 жыл бұрын

so this board will work the the kab250v3? as its lacking sooo much in bass.

@rob6154 3 жыл бұрын

I love it 💖🤩🤩 Dayton Audio has done it, there about to get even bigger , they have created a way for you to build your own audio projects and more , they make all kinds of speakers 🔊 and equipment , it's PERFECT you can't go wrong with "DAYTON AUDIO" , I'm about to buy a ton of stuff from them , I'm gonna build Bluetooth speakers 😁👍🔊🔊🎼🎶👀,

@maxtechnikspielerei5171 4 жыл бұрын

I have a pair of already built (expencive) speaker thar are out off balance (in my ears) - middle bass way to high, highs to low, etc. I would like to correct this by using DSP. Is this possible with this module + software? 1. measure speakers - how? via bluetooth app and the phone mic (app internal software calibration for apple, ...) or someting with PC? 2. let the software / me flatten the courve (not corona...audio) 3. hook up speakers, be happy (can one also do this at severals volume level? -> low-> more bass, high-> less bass) Is this possible? Thanks for advice!

@PartsExpressOfficial 4 жыл бұрын

Reach out to our Tech Department if you need helps with specifics...but yes, DSP can help speakers balance out your highs and lows plus so much more. Here is info for our Techs though: Email: Tech@Parts-Express.com Phone: 1-800-338-0531 Hours 8am-6pm M-F EST / Closed Sat & Sun

@JustArtz 4 жыл бұрын

Sureh Electronics JAB boards VS Dayton KAB. Who was first? Who copied who? Are there any differences?

@matthewmassey2333 4 жыл бұрын

Sure electronics does OEM work for many companies Dayton audio is one of those companies though I'm sure they made some tweaks to the design. And IMO do a better job of marketing the products

@JustArtz 4 жыл бұрын

@@matthewmassey2333 haha yes marketing wise sure electronics is terrible and could learn a thing or 2 from other brands. I've been using the wondom boards for quite some time now and must say that combining the amp boards with the battery protection boards works like a charm. I still want to try out the Dayton boards but I think it won't make a huge difference in sound quality etc

@FOHFILMS 2 жыл бұрын

@@JustArtz They are identical. The only difference is the red silk screen and the Dayton Audio branding. Both are fundamentally the same WONDOM product

@cell1540rol 4 жыл бұрын

I wish PE had a board that supported the AirPlay protocol. The AirPort Express units are getting dated. Obviously these boards would have to connect via WiFi.

@PartsExpressOfficial 4 жыл бұрын

We actually have a great solution to this called Hi-Fly. You can use airplay to send music to any device that has Hi-Fly built in and we sell adapters to add Hi-Fly to current systems and DIY builds. Here is some more info: www.parts-express.com/hi-fly-audio

@CrimeEnjoyer 4 жыл бұрын

How many algorithms can you use per card?

@PartsExpressOfficial 4 жыл бұрын

It is going to depend on which algorithms you choose to use in SigmaStudio. For example, something like a SuperBass algorithm is going to take up significantly more resources than a single high pass filter would use. But in general, there are more than enough resources available on this chip for most projects. For example, none of the example projects provided on the product page come close to maxing out the resources of the chip.

@CrimeEnjoyer 4 жыл бұрын

@@PartsExpressOfficial Awesome, thanks for the detailed reply!

@ubacow7109 3 жыл бұрын

Is there any way to connect a DAC to the board?

@PartsExpressOfficial 3 жыл бұрын

The ADAU1701 contains its own DAC, as the input signal is originally digitized so it can be processed by the DSP. the signal chain is analog input -> ADC -> DSP -> DAC -> amplifier -> speaker outputs. If you have any more specific questions, contact our tech support: Email: Tech@Parts-Express.com Phone: 1-800-338-0531 Hours 8am-6pm M-F EST / Closed Sat & Sun

@FOHFILMS 2 жыл бұрын

You can! The ADAU1701 has multipurpose GPIO pins that can be used to output an i2s serial audio data stream to a compatible DAC. On these boards, the J2 connector (the one next to the four potentiometers) contains these pins, and are programmable to the needed MCLK, BCLK, LRCLK, and DATA connections in the SigmaStudio software. This header also has a GND and +3.3v pins if needed for your i2s DAC.

@sniraviv 3 жыл бұрын

the 2.1 Arylic 100+50+50W + DSP for much less $$$

@mystupidfacebook 3 жыл бұрын

i just want my sub working again what am i doing here i dont understand anything he's saying lol

@PartsExpressOfficial 3 жыл бұрын

What are you confused about?

@KnowName33 4 жыл бұрын

Goddamnit you guys will you all quit saying "speaker building" because your not talking about building a speaker your talking about buying parts for a custom sound system layout. If you were speaker building you would be buying spiders/cones/motors/baskets/voice coils/tech.

@FOHFILMS 2 жыл бұрын

That's speaker *driver* building that you are describing... lol