Brand New 18 year old Makita HR4011C Hammer FAULTY. What's the problem and can we fix it?
Рет қаралды 39,441
23 күн бұрынJust bought this Old stock Makita HR4011C Rotary hammer for spare parts or repair, for dirt cheap online.
Was told it was a non runner so only good for parts or repair.
Who better to buy it than a makita repair agent.
A cheap and easy fix, and now I have a new Makita hammer for next to nothing.
Stay tuned as iv bought another makita hammer in the same condition, so will post that one soon.
#makita #Hammer #spareorrepair #hr4011c #brandnewfaultymakita #faultymakita #hr4011crepair #fixed #tools #fix #repair #howto #powertool #deandohertygreaser #powertools #diy #toolrepair #toolrestoration #newoldstock #willitrun #willitwork.
@bigdavedownunder 20 күн бұрын
Who gets the feeling Dean is a little excited about this one lol
@MichaelWilhelm-tf8vy 20 күн бұрын
Of course. 😅
@Dazob66 20 күн бұрын
Defo was excited could here it in his voice and rushing to get it all back together to spark it up......gotta love him👍
@Justicesdad 20 күн бұрын
Dirt cheap too
@CreativeCarpentry 20 күн бұрын
Made the video more entertaining seeing and hearing how giddy he was 😂. We all get that feeling when we get a bit of luck like that.
@williamjacobs236 20 күн бұрын
I bought a nearly new hand held leaf blower that did not run put a $10.00 US dollars coil 8 years ago still running today ! I was almost as excited as Dean was !😊
@v3ndril 20 күн бұрын
Unreal thats its sat around for 18 years until now. Score for you!
@Pete292323 20 күн бұрын
This was a great one. Teardown videos would also be great, I used to love watching BOLTR videos by AvE.
@winterlord22 20 күн бұрын
Dean's excitement is so contagious! At one point I was more excited than he was :)))
@michaelwheeler4519 20 күн бұрын
Well normally you get the dirty ones, it’s great to see you get something so clean for yourself, you deserve a great find like this I am excited for you…. And yes I would not mind clean new tool tear downs, we are never too old to learn… thanks again for the great content…
@todornikolov2063 20 күн бұрын
I can feel the excitement in Dean voice and impatience is she runnin' or not. Pure emotions. Awesome and thanks for sharing with us.
@schuey089 4 күн бұрын
Fab mate! Was a bargain indeed! Interesting watching you taking it apart & putting back together again!
@dieseldog1959 20 күн бұрын
We can hear the wee giddy lad coming out in your voice, Dean. What steal of a deal!
@RainManFights 17 күн бұрын
I'm so happy I found your channel. It is 100% up my alley. I have been repairing my dad's shops tools forever. It's so amazing to see how it's done right. I have learned an absolute TON for your videos thank you.
@1978JonBullock 20 күн бұрын
I have never been more sure Dean would get this up and running. Great score Dean.
@malachy1847 10 күн бұрын
Reckoning that the Build quality back then was , much, much better that what's being knocked out today, as everyone it trying drive down production costs on even top name manufacturers , another Great Upload ... [you really scored big time for that Treasure...]
@davidquirk8097 5 күн бұрын
That sticker with the arrowhead on it says that the unit was supplied to the UK MoD which explains why it sat around so long and got left. It's been on a shelf at ABRO Donnington where all the storemen knew it was a non-runner but nobody wanted to do the paperwork to send it the mile down the road to Makita EU at Telford. I bet it cost the UK taxpayer more than 700 Euro in the first place and the cost of storing it for eighteen years doesn't bear thinkng about. Good score for you Mr. D. Hopefully you'll get a few more like that. Follow that seller.
@Darkest-Light 20 күн бұрын
Great job and video here Dean, informative & easy to follow too. Feeling a lot of second-hand pride for you, well done on the (rightly cautious!) repair job. If you could do a similar teardown on the Makita 8406C diamond core drill, would be greatly appreciated 👍 Heard it can be a difficult one
@Toolz1980 20 күн бұрын
Absolutely love this! Great to see that this tool ended up with someone who can actually take care of it. Hope you can find more of this type of toy for yourself, you deserve it!
@JonHeets 20 күн бұрын
I'm officially addicted to your channel, great job Dean!
@marcmckenzie5110 19 күн бұрын
As a fellow tool lover, the enthusiasm in your voice made me very happy!
@ringstinga 20 күн бұрын
Congratulations Dean, A well deserved quality find, You got yourself a cracking bit of kit. !
@fredroy6417 20 күн бұрын
yes absolutely love to see teardowns of any new tools
@rogerhodges7656 14 күн бұрын
Great score! You make everything look easy.
@jasonvandervalk3679 20 күн бұрын
In this world quality is almost none existint anymore! This is why I watch your videos.
@funkojones2947 20 күн бұрын
Cleanest tool I've ever seen on the bench ! Congrats on the score !
@kug2002uk 20 күн бұрын
That machine had been waiting years for a kind and caring owner, then wallop, there you are my friend. Great find Dean, well done m8.
@ZerpsT 20 күн бұрын
Karma working it's magic again. Thanks for all the amazing and consistent content.
@plunder1956 20 күн бұрын
What a superb tool, well done Dean.
@K.P.Alexander 20 күн бұрын
That's an amazing find, Dean. Would also love to see some tool teardown videos. I know you don't normally fix the low end consumer stuff like Ryobi, but I think seeing you tear them apart (literally and verbally) would be quite interesting. Edit: Nothing against Ryobi. I own quite a few myself. But, seeing what makes it different in build quality and construction would be interesting.
@l.t.1573 19 күн бұрын
Tear-down videos would be fantastic, I watch you mostly for your opinions about the tools from my wishlist 😉 and good for me, since most of them used to be Milwaukee. Greetings from Poland!
@telecomsuk 17 күн бұрын
Great video thanks, I was given a faulty much cheaper Dewalt rotary/hammer similar size to this, the motor was really noisy, I put the model number into ebay search and a couple of weeks later the same model appeared with a faulty gearbox, split the 2, swapped parts over it’s a very capable diy Sds drill/ breaker. You get such a sense of pride at saving something. I got a power mini belt file/ sander with case in Lidl for £5 because all the bolts for the accessories were lost. A quick rummage around in the garage and I have saved another useful unusual tool.
@rickmarr4744 20 күн бұрын
A diamond in the ruff and brand new to boot. Great find.
@gutsngorrrr 20 күн бұрын
What an absolute score. We used to have problems like this, at the large store at one of the companies I worked for. Some equipment just sat on those shelves for decades.
@robertkovacic4623 20 күн бұрын
I have HR4013C-great machine...and same "Made in Japan"...bought new for 430€😁 in 2018 Keep up the good work-I love this channel.👍
@Chrisinlondon 20 күн бұрын
Congrats what a fantastic find!
@francocacciotti2530 20 күн бұрын
Wow, Great Dean. You finally gave a life to a great Makita tool! I like this genre of video.
@kharseet2014 20 күн бұрын
I'm happy for ya! Thats a heck of a deal mate.
@deathmetalsl 20 күн бұрын
This is what archaeologists must feel like when they discover hidden relics! 😂
@Stefan_Kawalec 20 күн бұрын
Excellent find.
@johnbrady1413 19 күн бұрын
Absolutely fantastic dean. Really enjoyed your excitement in this video and the content was outstanding thank you. We grow old but never grow up 😁 boys and their toys 👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍
@DaineG88 20 күн бұрын
This video deserves a double like! lol awesome stuff Mr Doherty
@Cheers_Warren 7 күн бұрын
I like the idea of new tool breakdown . Allow us to compare tools .
@krahwinkel9503 19 күн бұрын
Nice one. Congrats to this 1-in-a-million find.
@danshavit4510 20 күн бұрын
Fantastic find mate. Happy for you ❤
@mrcallaghanbarry 12 күн бұрын
Mighty video sir, great find too, I'd be the same as you, keep it! Also the new tool teardowns would be awesome, same as the ones ya did on patreon.
@illezt 20 күн бұрын
Dean loves his makita ❤
@ElMariachi1337 20 күн бұрын
Great find! Love the dampers on this thing.
@fredholmes6284 20 күн бұрын
Been waiting for this one 👍
@johnrutherford4042 20 күн бұрын
Good effort Dean you deserve a good bargain great video as always well done
@leeberry9666 16 күн бұрын
I have never seen a video where Dean is so excited about the repair.
@danellabarnes-penman1118 20 күн бұрын
Dean getting excited over this one! It’s always a good hour or two after watching Dean rebuild, fix, and repair tools. #IrelandsMcGuyver
@AnthonySmith-hr2kp 20 күн бұрын
I think I can hear Dean's voice jump up a octave or two as he squeezes the trigger and it runs. Great job Dean, congrats on the find and rePair on the cheap!!!
@stevem5156 20 күн бұрын
Everyone missed the war dept sticker on the side . So this is probably from military surplus and likely lay in a storeroom for many years
@tomthompson7400 20 күн бұрын
Thats a great result , you can just see the quality in that thing.
@edwardlogan267 20 күн бұрын
Dean, please do a teardown on anything XGT Makita! Would love to see how you think the internals compare to the older stuff. I have found mine really good but other people i know have had mixed results. Drill, grinder, or anything really would be worth a look. Thanks!!
@shifty277 20 күн бұрын
Please tear down some Makita XGT 40v tools if the shop carries any! Great find - my guess is 50 euro on probably 800 euro retail machine. Thumbs up.
@willbarger2233 20 күн бұрын
I like the little impact you are using. I have a few and they are handy.
@paulrowntree2800 20 күн бұрын
Congratulations Dean. I would love to see some teardown videos please.
@tonybr2469 20 күн бұрын
Win win glad your keeping it keep up the good work mate
@noe29933 20 күн бұрын
Delighted for you Dean happy Days ❤ 😅
@markojuros6533 20 күн бұрын
It's like Christmas morning for you Dean.
@andrewlewington829 20 күн бұрын
Excellent buy and Find Dean.. it’s certainly worth keeping. It’s like a kid been in a sweet shop 😊😊👍
@AmiPurple 17 күн бұрын
Would be great to see teardown videos of new tools. Great videos thanks
@rodb7437 20 күн бұрын
Like watching grass grow awesome to see ❤
@Failsafeman100 20 күн бұрын
I'm getting second hand glee listening to this haha.
@miklhrmn 20 күн бұрын
Nice one. What a find.
@Howto-hj4sq 20 күн бұрын
Well deserved, new tool / best selling tool tear down makes sense
@peterryan7340 20 күн бұрын
I have that same Olight key ring torch on my work keys too. Very handy
@Steve765 20 күн бұрын
Congratulations on a terrific find. Also yes to tool teardown vids on all the usual suspects like drills, planers, routers, saws etc. I've bought a pair of those fancy knee pads you did a video on a while ago and I'm not disappointed and also got the Skil battery drill for home use and that's a great little drill. I use all Makita cordless tools at work it's just a bit of a challenge to get my boss to part with the cash to get the brushless tools. 😅
@jonnyduncan7056 19 күн бұрын
Is that a Military "Crows Foot" part number on the side? Amazing knowledge and very addictive streams you do Dean..
@Mechanicmckie 20 күн бұрын
Deano is acting how I act when he uploads a new video, all giddy and excited 😝 would love to see the teardown videos
@jaymacgee_A_Bawbag_Blethering 17 күн бұрын
I’m still not sure why - but I found this “ riveting “ 😅.. cheers Dean 👏 👍🏴
@leonardpaciora5039 20 күн бұрын
Thanks, another great job!!!!!!
@keithmatthews1673 20 күн бұрын
Well done! Its a great feeling when you find a bargain. I used to scour junk shops and found a few gems but it became harder to find stuff when junk shops started to die out after the late 1990s. As examples I found a book on travel in ireland illustrated by WB Yeates for 50p that sold on ebay for over £50 and an old SME HiFi pickup arm attached to a broken turntable for a fiver. The arm sold to a Japanese ebayer for £270. An vintage fixed spool fishing reel again went to Japan for £120. Ah, the good old days. Ironically Ebay helped to kill off the junk shops and rising rents and rates did the rest!
@patrickcowan8701 20 күн бұрын
I think you took it all apart just for the excitement. Wish i owned that.
@anthonyblacker8471 20 күн бұрын
I have to guess Dean.. 30 Quid? Anyway what a fantastic specimen to get your hands on to.. she's as clean as a newborn baby, innocent and never even broken in.. what a beauty! (I'm only 1 minute into the video, I can't wait to see the issue)
@dodgyjpt 20 күн бұрын
great content as always looking forward to the next video drop
@anthonyblacker8471 20 күн бұрын
I sure hope this video gets a lot of looks, I'd thoroughly enjoy seeing the inside of new tools.. Ave used to break into tools as he bought them (over in Canada ya know) but haven't seen many of his videos lately. He was a metallurgist / mine engineer / miner / the man, anyway.. I'd enjoy some teardown videos, although I tear down every machine I've ever purchased, new or used!! haha
@davidvanzuiden3906 20 күн бұрын
Good job!
@tzsteve33 18 күн бұрын
What a thing of beauty
@no.3gardenoffeedin950 19 күн бұрын
Nice one Dean, wish I could get finds like.this lol
@memofrf 20 күн бұрын
Good luck follows hard work, Thank you.
@TheGtrmarcus 20 күн бұрын
Dean wins the feel good video of the day 😊
@andrewrits3536 20 күн бұрын
Wow I really enjoyed this hey mate can do more of theses dean
@liftrucs 20 күн бұрын
Never any doubt it was going to run, Brilliant
@slaneysider106 20 күн бұрын
Well done Pal.
@brucedickison8788 20 күн бұрын
I would love to see a Makita drywall cutter tear down. Thanks for the videos .
@adammcnabb6755 20 күн бұрын
Would love to see the tear down videos at least then we’ll be able to see how much the quality has gone down in these new tools love the videos keep em coming 👍
@Jim_Newlands 20 күн бұрын
Ha, ha.....never heard anyone so excited about a drill!😂😂
@dannyhogi4953 20 күн бұрын
Make it look so easy top job your a clever man
@kevinchamberlain7928 20 күн бұрын
The little black sticker has an MOD Crows Foot emblem. This is possibly an ex army tool.
@1969juddy 20 күн бұрын
love ya work bloke
@aurorasalinas1215 20 күн бұрын
That was kool to watch.
@Tarzan_Tools 20 күн бұрын
congratulations!!
@michaelarendsen 20 күн бұрын
we love to see new tools :}
@michaelfairchild 20 күн бұрын
Dean happy about a tool like I was year ago when Ive bought myself a Makita XGT HP001 and the blower 😅 That said, grab a new Makita HP001 for teardown. There should be a special chip that with an adapter you can lock the tool to the batteries.
@prasadvn524 20 күн бұрын
Oh that was a great clean up
@daverichmond2846 20 күн бұрын
Christmas in July! Bet u couldn’t wait to get that home,..? Good stuff.
@snackedonjack 20 күн бұрын
Makita 10.8v impact are my favourite of all time for repairs and light duty construction! Don't see them around much anymore.
@oliversorensen5178 18 күн бұрын
Nice job
@trufix72 20 күн бұрын
Mr Doherty what type of grease do you use. The brown type and the white clear type. I really enjoy your videos. Your videos are the best so far that i have seen on KZfaq.
@Eddyz0r 20 күн бұрын
Teardown of tools would be amazing. Specially the bit cheaper tools like Ryobi, Skil etc.
@MrFixiit 20 күн бұрын
That was a nice bit of luck , I find it a pleasure and relaxing to watch you working so if you wanna tare down some new tools ill proberbly watch those too
@SlimRyan2009 18 күн бұрын
Teardown would be great
Dean Doherty
Рет қаралды 62 М.
Comedy Club
Рет қаралды 7 МЛН
Dean Doherty
Рет қаралды 42 М.
Chickanic
Рет қаралды 407 М.