How to straighten steel wire
Рет қаралды 59,062
7 жыл бұрынThis video shows how to use a wire straightener to prepare steel wire for the installation in a lightning protection system.
**Products**
Wire Straightener, 10 guide pulleys, movable on rubber wheels
Type: DRG 10RO 7.10 FB STTZN
Part No.: 597 006
Support Rd: 7-10 mm
Dimension: approx. 1650 x 1200 mm
Straightening Tool
Type: RE G 8.10 FL4 STBRUE
Part No.: 596 000
Application Rd / Fl: 8-10 mm / -4 mm
Length: 260 mm
Wire Straighteners - 5 guide pulleys, with handles
Type: DRG 5RO 7.10 HG STGALZN
Part No.: 597 004
Support Rd: 7-10 mm
Dimension: approx. 180 x 290 mm
Wire Straighteners - 10 guide pulleys, with handles
Type: DRG 10RO 7.10 HG STGALZN
Part No.: 597 005
Support Rd: 7-10 mm
Dimension: approx. 650 x 180 mm
Wire Straighteners - 10 guide pulleys, with derrick
Type: DRG 10RO 7.10 DB STTZN
Part No.: 597 003
Support Rd: 7-10 mm
Dimension: approx. 1350 x 580 mm
Round Wires - Steel Wire
Type: RD 8 STTZN R127M
Part No.: 800 008
Resistivity: ≤ 0.15 Ohm mm² / m
Cross-section: 50 mm²
For more information visit us at www.dehn-international.com
@mjremy2605 Жыл бұрын
Can anyone please explain the difference between the Derrick Pulley system at 3:01 and the one with the single set of wheels? Why do we need a set of 10 vertical and horizontal set of wheels for wire pulling? Why is 5 wheels not enough? What is the difference? I need to know!!! I have to make a tiny jig for small gauge jewelry wire which gets tangled up occasionally. I work with 18 gauge to 24 gauge mostly in round, square, and half round profiles. The half round is a real pain being so thin and easily tangles up. I have 50 ft to untangle. This wire is expensive! I need to make a very small jig to untangle. Please, please someone explain the difference between the 5-wheel machine and the 10-wheel machine!!
@DEHN-International Жыл бұрын
@MJ Remy: Thank you very much for your question. The 10-pulley system has pulleys which are 90° displaced, thus giving the system higher straightening capabilities than 5-pulleys, less tension will remain in the wire after straightening. These wire straighteners are for steel wires 7-10mm² or AWG 1 - 000, therefore not applicable for your application (AWG 18/24) at hand. Greetings from Neumarkt, Your DEHN Social Team
@lamnguyenthanh3357 2 жыл бұрын
Có tiếng việt gô e mua một cái duỗi kẽm 3li
@yashabahari5393 7 жыл бұрын
I am from Indonesia, the machine is how much, if you want to buy how to do
@franzwolfrum5097 6 жыл бұрын
Dear Mr. Zaen, please get in touch with our office in Singapore. Contact person: Darren Poh (DEHN)
@comprascel2042 4 жыл бұрын
@@franzwolfrum5097 is it possible to streighten steel wire no. 8 with this machine, where can i find them for the mexican market?
@world-suppliers 6 жыл бұрын
where can i find this machine plz
@DEHN-International 5 жыл бұрын
@nadjib labbed: Please check: de.hn/en/a/597006
@sneakersot00l77 2 жыл бұрын
use a straight cut machine to straighten your steel wire! (it cuts it also..)
Yakup Kütük Color Vizyon
Рет қаралды 35 М.
Rj Mobile 01
Рет қаралды 15 МЛН
Immersed
Рет қаралды 7 МЛН