Рет қаралды 29,153
This is an upgrade from a 128GB SATA based M.2 SSD to a 500GB NVME based M.2 SSD. I cloned everything to the new SSD, blew dust out of the laptop and made sure the system booted up from the new SSD.
USB to M.2 NVME enclosure
amzn.to/3JOc82d
Samsung 980 500GB NVME
amzn.to/3n68VkU
You can purchase the tools I use in my videos using the Amazon links below.
DataVac blower
amzn.to/3ozYSpL
This is the powered screwdriver I use in the video. Metabo HPT Cordless Screwdriver Kit
amzn.to/3xNzgqz
This is the cheaper version I show
amzn.to/3z77Tbk
This is the one I have. It has the same 64bit set along with some other useful tools and a carrying case.
amzn.to/2Shdjfr
00:00 Introduction
01:47 Choosing the SSD upgrade
02:16 Putting it into a USB to M.2 NVME adapter
03:50 Cloning software
04:49 The cloning process
06:33 Blowing dust out of the laptop
07:13 Opening the laptop
07:35 Replacing the SATA SSD with the NVME SSD
08:52 Showing the other upgrade options inside the case
09:05 Blowing out more dust from the coolers
11:00 Closing up the laptop
11:27 The initial boot fails
12:36 The 2nd boot works, all good
14:36 Going over what we did