You can add a anti hammer to supply lines to stop hammering, and maybe code in your area.
@jdh88352 жыл бұрын
Awesome looks great
@metalexfuentes2611 Жыл бұрын
Very helpful thanks
@GotchaplumberGotchahvac Жыл бұрын
Well presented shower diverted video.
@Zoofactory9 ай бұрын
Very helpful.😊
@chrisgoosebeck3 жыл бұрын
Is that 1/2" pex for supply to the mixer, and then 3/4" pex everywhere else?
@sekibarhemet3 жыл бұрын
The diverter has 5/8 inch ends. What adaptor do you use to go from the diverter to the PEX tubing. I'm not sure how to make that connection, because I can't find 5/8 inch connectors. What am I missing?
@KingSobieski2 жыл бұрын
Instead of all the 90degree bits you could have just done a long lazy loop and it would actually flow better
@mangoconchile92306 ай бұрын
Why conected the hand shower in the left and no in the right ?
@gorbz10792 ай бұрын
There shouldn’t be no reason, maybe he I ain’t think it thru 🤷♂️
@jamminjimi333Ай бұрын
If using the diverter as a 3 position, you plug the right side port as per Delta instructions. If using as six, then you use both ports.
@jamescole31523 жыл бұрын
thanks. I had to turn on closed caption to understand. Must be from England.
@xav40752 жыл бұрын
can you please share the part numbers for the faucet and diverter?
@nickv2425 Жыл бұрын
Delta says 2 3/4 +/- from your finished face to the front of your wood block.
@Chikton6 ай бұрын
Could the Right part of the diverter be capped? Can't you cap the left side then use the right side for the handle?
@jamminjimi333Ай бұрын
If using the diverter as a 3 position, you plug the right side port as per Delta instructions. If using as six, then you use both ports.
@carolcarkins76473 жыл бұрын
How do you actual install the diverter cartridge
@colinsdesigns48503 жыл бұрын
Make sure you your water supply is off.Open faucet normally garden faucet relievers pressure in system.unscrew retainer screw which holds your blank cap.Unstall diverted cartridge in stall diverter cartage in stall retainer cap.
@David-sr3tz Жыл бұрын
How would you have plumbed it if there was also a tub faucet (which also has a diverter) ?
@ryanorhoads10 ай бұрын
A 1/2 tee out the shower head line
@thelmeno7 ай бұрын
Won’t the shower and tub be working at the same time?
@LubaLuba13 жыл бұрын
Why do you need a divertor??
@colinsdesigns48503 жыл бұрын
To be able to add a hand held shower
@lxmzhg Жыл бұрын
You don't 'crumpet', you 'crimp it'. A crumpet is something like an English muffin.
@donhuffer46373 жыл бұрын
Why are you using Pex if you're going to put all those joints in it. Cpvc would be better and cheaper. You're defeating the purpose of Pex.
@TheWorkinMan593 жыл бұрын
Pex offers better freeze protection than cpvc and does not get brittle overtime as cpvc can.
@donhuffer46373 жыл бұрын
@@TheWorkinMan59 I dont trust pex joints. One at the block and one at the fixture. Both accessible.