VALVE - DELTA - R-22000 | INTEGRATED SHOWER DIVERTER SYSTEM

VALVE - DELTA - R-22000 | INTEGRATED SHOWER DIVERTER SYSTEM | INSTALLATION

Рет қаралды 45,110

GO-DIY

Күн бұрын

Пікірлер: 33

@doncasillas2609 Жыл бұрын

Perfect, helpful video without any fluff or narration needed.

@ozzymendoza5109 2 жыл бұрын

Very helpful 👍🏽👍🏽 Thank you for making this video

@alsostevenrodriguez9234 Жыл бұрын

Thank you! You’re a life saver!

@Zoofactory 9 ай бұрын

Nicely done.

@john-lh9ly Жыл бұрын

Love your gorgeous bathroom suite!!

@jiovannitaylor7812 Жыл бұрын

good video

@miguelangelmosquera5273 2 жыл бұрын

Brilliant ,thanks

@go-diy 2 жыл бұрын

thank you.

@txoojvamproductions6898 27 күн бұрын

Did it come with silicone? If it does, you could apply the silicone to the rubber ring.

@maryanrzhiskiy3609 2 жыл бұрын

Thanks for this brilliant video! However i can't get my hot water....just light warm. Any thoughts?

@xtralargeburgerplaysdayz1355 8 ай бұрын

Woah. I looked this up and see that the bathroom im putting together is eerily similar. Same tub and faucet too. And white marble. Spooky.

@frankcoffey 10 күн бұрын

Can we get a complete parts list? I'm not sure what all I need.

@JohnDoe-qg7pb Жыл бұрын

How did you install the piece underneath the handle trying to remove mine in my shower to replace

@kyusclips Жыл бұрын

Everything was great except the cpvc

@guadalupevillegas3211 2 жыл бұрын

I was told that I needed this rough in R-22000 for my bathroom remodel. I had a design in mind and ordered the shower head, hand shower with slide bar along with a 3 setting diverter trim. Do I need to cap off anything? I had someone come and look and they asked if I was going to add the body sprays. Will this R-22000 still work or do I need to install the 6 setting rough? Thank you

@radodrill 2 жыл бұрын

The R22000 works with either 3 or 6 setting (2 or 3 function) trims. When using a 3 setting diverter, the right outlet must be capped and the 2nd function must be plumbed to the left outlet.

@uberdwang 10 ай бұрын

I'm confused at the cartridge position. At this step, kzfaq.info/get/bejne/fbZnh5SfmsrQnYk.html, the word 'hot side' appears on the left with the teeth left/right. Then when installing the volume control handle step, kzfaq.info/get/bejne/fbZnh5SfmsrQnYk.html, 'hot side' appears on top with the teeth on top/bottom. Does the cartridge and 'hot side' get rotated at a certain point? The video never shows it getting moved. Same with the instructions it came with. The diagram shows it appearing like that with no indication of moving the orientation. I have the cartridge with 'hot side' on the left, and due to the teeth position of left/right, the handle attaches on the 'on' position (3 o' clock), instead of the 'off' position (6 o' clock).

@uberdwang 10 ай бұрын

I had a broken cartridge so the 'on' and 'off' never worked, thus confusing me on the 'hot side' direction. When initially installing 'hot side' points left. Then when installing the handle, point it down to turn if off with 'hot side' pointed up as you do the rest of the work

@condorcoaching8267 9 ай бұрын

My brand new valve. The cartridge won’t seat properly with Hot label on left. It doesn’t key in properly to the small tabs that need lined up to valve body. So I installed the only way it could fit into slots. Just finishing trim out of shower but the divertor works well but I have a decent amount of pressure always flowing out. The valve will not stop the water in ‘off’. Everything feels correct Just can’t turn it totally off. More than a drip it’s like 1/4 flow or more. Cartridge not seated right or something with the hot side being incorrect. My plumber roughed in. I’m finishing the job

@Bsballjoe25 2 жыл бұрын

Need help taking off my handle to get to the rotational limit stop. I’ve tried pressing and pulling from every angle and can’t get it off. There’s no slot screw or anything to take it off and I’ve taken off the whole trim already besides the valve handle

@chipburns4123 Жыл бұрын

Are you still trying to get it off?

@Bsballjoe25 Жыл бұрын

@@chipburns4123 no I got it already thanks

@sanremodude Жыл бұрын

It looks like I can use this to operate 2 shower heads on one valve. How does it work? Can you operate the 2 shower heads independently and together?

@TeeJay_757 Жыл бұрын

Yes you can operate two shower heads independently or simultaneously. You also have a third option on the right hand side for body sprayers or even another shower head.

@lvhs1990 Жыл бұрын

Hey peeps..I almost done with my new shower... installing this vavle..but the trim sleeve doesn't fit over the bonnet!!!! Anyone else have this issue...need help plz...

@mikecarney8023 Жыл бұрын

I’m having the same trouble. The sleeve fits over the valve body but only if I don’t install the big O-ring. If I put the O-ring on there’s interference and the sleeve will cut into the O-ring if I press too hard. Did you solve this?

@geromelim3704 Жыл бұрын

What I'm going to do ? I put the cap in the wrong side. I put it in left.

@juangarduno2651 Жыл бұрын

Do yuo fixed we make same mistake

@geromelim3704 Жыл бұрын

I haven't fix it.

@curtclick234 11 ай бұрын

Skipping lots of steps

@number6396 Жыл бұрын

some explanation is needed. I watched to learn about the two wratched pieces (black and white one) on setting temperature and you provide no information . . . just a view which is really not helpful.

@TeeJay_757 Жыл бұрын

kzfaq.info/get/bejne/bdKTjbCa3pudgaM.html