FJ gets CUSTOM Dash, Floors, Fuel Tank and Rear Winch

Рет қаралды 127,416

Күн бұрын

Build Episode #2 for the next generation Barra powered FJ45/80.
In this video we take the newly modified chassis, add a fuel tank, rear winch mount, cab, custom floors and Dash.
Build Intro Video: • Our most AMBITIOUS Bui...
Build Video #1: • FJ gets WILD SUSPENSIO...
LCS website: www.lcs4x4.com.au
Fuel Tanks: lcs4x4.com.au/shop/builder-pa...
Bonnet Strut: lcs4x4.com.au/shop/40-series-...
Floor and Transmission Tunnel Kit: lcs4x4.com.au/shop/40-series-...
Dash: lcs4x4.com.au/shop/40-series-...
Designed and Built
Workshirt: designedandbuilt.com.au/produ...
Merchandise: designedandbuilt.com.au/shop/
Website: designedandbuilt.com.au/
Instagram: @designedandbuiltofficial
LCS Services
Cad services: designedandbuilt.com.au/produ...
4x4 Accessories: www.lcs4x4.com.au
Plasma Cutting: lcs4x4.com.au/plasma-cutting/
Channel Sponsors:
- Kincrome
-Goodyear
- barratheworld.com
- Raceworks
- www.lcs4x4.com.au
0:00 The Plan
1:03 Rear Winch Cradle
2:39 Mounting a custom fuel tank with cradle
4:07 Making custom stainless steel fuel tank straps
7:40 Rear Recovery Points
8:36 Mounting a 40 series cab on 80 series chassis
14:12 LCS Bonnet Strut Kit
15:17 Cutting out old dash
16:50 Cutting out old floor
18:03 Custom New Floor and Transmission Tunnel Install
21:43 New Dash for 40 series install

Пікірлер: 74

@viqtahkorir7622 3 ай бұрын

Just discovered your channel and I have to say its the most underrated channel, you should be having 1M subscribers....

@OffroadTouringLife 3 ай бұрын

What a top episode!! Cheers for taking is along.

@DesignedandBuilt 3 ай бұрын

Thank you! Glad you enjoyed it 🙂

@TylerBeckAU 3 ай бұрын

That's incredible, I love it. I especially like how the editing makes it look so smooth and quick :D

@DesignedandBuilt 3 ай бұрын

If only it was real time, we’d be here for weeks 🤣

@Gizmologist_ 3 ай бұрын

OH. this is so pleasing to watch

@claudeseide9209 3 ай бұрын

Awesome work. Been following since you built your Barra 45/80. This is great stuff !

@itsfromlawrence 4 ай бұрын

will hoping to pop in to lcs this week to talk MWB 46/80 build, your videos are great to watch Richard, well done.

@DesignedandBuilt 3 ай бұрын

Might cya down there! Cheers Lawrence.

@refuge6944 3 ай бұрын

Fab Rats

@craigjensen4179 3 ай бұрын

Got all the gear, makes life a lot easier. Keep it up

@VaughanMunro-js4nr 3 ай бұрын

Another amazing video. Such highly skilled tradesmen. Wonderful to watch.

@DesignedandBuilt 3 ай бұрын

Thank you very much! Glad you enjoyed it!

@adamblundell6402 3 ай бұрын

Mate these videos are absolute 🔥 I love the detail that goes into it. Not just a quick explanation then cut straight to the finished product. Awesome work mate. And can we give a thanks to young Connor good infront of the camera and has some skills behind a welder as well

@DesignedandBuilt 3 ай бұрын

Thanks Adam, glad you enjoyed it! Yep, he does a ripper job in front of the camera and on the fab work!

@MHP47 4 ай бұрын

Good stuff, great episode. Enjoyed the content, and looking forward to more

@DesignedandBuilt 3 ай бұрын

Thanks mate!

@freeidaho-videos 4 ай бұрын

You mates do outstanding work!

@DesignedandBuilt 3 ай бұрын

Kind words 😊 thank you!

@mattw1393 3 ай бұрын

Connor is like a 70yr old master craftsman in a 20yr old body.

@nazoe83 3 ай бұрын

*saya suka video seperti ini, sedikit bicara banyak menampilkan bekerja 👌*

@cyclemoto8744 3 ай бұрын

Mint! Well done

@vaughanscott7308 3 ай бұрын

Fantastic I will be following.

@78dwk 3 ай бұрын

just subscribed, Outstanding Work, looking great, cant wait to see more Thanks Godbless

@chilliburn1 3 ай бұрын

totaly awsome

@danbridgborn6371 3 ай бұрын

This is coming along great, speaking of great landcruisers keep an eye out for bluey dyalls LC build. Word on the trails is its gona be the next big thing 👌

@koontproductions 3 ай бұрын

Stiffy material 👌

@s3uoq 3 ай бұрын

That plasma table deserves an Oscar 🤙

@DesignedandBuilt 3 ай бұрын

🤣 the real MVP, doesn’t forget its lines or require retakes!

@xxxxxx-sf8px 3 ай бұрын

New fan here from the Philippines

@PeterHatch-mx7zc 2 ай бұрын

Its a credit to your skills

@PeterHatch-mx7zc 3 ай бұрын

Just subed up its a credit to your skills best from California

@DesignedandBuilt 3 ай бұрын

Thank you!

@gregsmith3366 3 ай бұрын

Great build 👌one thing for cab mounts you’re better off using nylon nuts because with the rubber flexing the spring washer and nut can become loose 🍻

@DesignedandBuilt 3 ай бұрын

Cheers Greg, good call and will do it on final assembly for sure!

@aserta 3 ай бұрын

You guys should get a hold of a large press so you can do rounded panels for stuff like the floor replacement.

@DesignedandBuilt 3 ай бұрын

Mate we would love to! When we can afford it 😁

@danielthornton3277 2 ай бұрын

"Sheetmetal only" bending 5mm plate.... that's how i roll 😊

@darryllspalding9680 4 ай бұрын

yep

@jerivan_riski0516 3 ай бұрын

how much welding wire should be used to make the chassis starting from 0

@abkre11 2 ай бұрын

ابداع فوق الخيال لدي سيارة نفس المديل اريد تعديلها لكن الوضع لا يسمح

@swrncustom 3 ай бұрын

Top mannnj

@MMIITTGAMES 3 ай бұрын

Was pretty keen on seeing how you guys built the fuel tank, maybe next time 😢

@DesignedandBuilt 3 ай бұрын

Hey mate, check this video for one I have done before. The fuel tank in this video didn’t use the tab and slot method but had returns for all the baffles. kzfaq.info/get/bejne/nN6DZ6aiva7eooE.htmlsi=0F4uzDQTU9cOe-co

@MMIITTGAMES 3 ай бұрын

@@DesignedandBuilt Thanks, Appreciate the work you guys are doing it’s inspiring!

@zadelyne1623 3 ай бұрын

How do you get those big tyres on the road legally. I’ve been wanting to do a build like that but don’t know how to legally get bugger tyres.

@Bizzo_ 3 ай бұрын

OOTG

@Cruzn_105 3 ай бұрын

where did yous get the new doors and bonnet from?

@DesignedandBuilt 3 ай бұрын

Muscle car parts!

@user-qu2mw2jp7r 2 ай бұрын

Здравствуйте! Подскажите полный размер колёс?

@richardwalsh5570 3 ай бұрын

I wouldn't say a precion ground combination square is a Carpentry tool. I would say a Fitter and Turner Engineer tool 😊

@DesignedandBuilt 3 ай бұрын

Bloody wood butchers mate 🤣

@danielthornton3277 2 ай бұрын

@DesignedandBuilt Hey hey, chippy here 😂

@robertbitz1830 3 ай бұрын

Where are the hood struts from

@DesignedandBuilt 3 ай бұрын

Lcs4x4.com.au!

@MateWiggy 3 ай бұрын

Using impact driver with 1/4 inch or 3/8 driver bit is way better than them electric ratchets.

@DesignedandBuilt 3 ай бұрын

For sure! It was just one of those days where you lose all your impact drivers 😅

@MateWiggy 3 ай бұрын

@@DesignedandBuilt 😂. You are awesome craftsmen, no matter what you are using. I love watching your builds. I build fuel tankers in NZ, but bloody miss building custom rigs.

@joesarrieto8434 2 ай бұрын

Can anyone fill me in is this cab no.2 or the original one that Richo put in

@DesignedandBuilt 2 ай бұрын

This is cab number 2!

@joesarrieto8434 2 ай бұрын

May I ask, what happened to cab no.1? Just genuinely interested

@DesignedandBuilt 2 ай бұрын

Sorry mate, still the same cab as we showed in the past episodes. I thought you were referring to different builds for a second!

@h-j.k.8971 3 ай бұрын

First I thought you were building a TANK, but it turned aut to be just a Toioda.

@Suitmyselff 3 ай бұрын

Safety 3rd at 15:40 lol 🥴

@aserta 3 ай бұрын

5:18 did you passivate it after?

@lennyross2813 3 ай бұрын

There is only ONE.. “i” in “ALUMINUM “ 😂 Great job on the build guys!

@keishasardido 2 ай бұрын

Be able to make the _meeting tomorrow and we will get back with the

@keishasardido 2 ай бұрын

Ask me for help 😂😂😂😂🎉🎉🎉🎉🎉🎉🎉🎉

@refuge6944 3 ай бұрын

Too professional so boring…

@DesignedandBuilt 3 ай бұрын

Can’t please everyone! 😂

@charlescox6608 3 ай бұрын

What did you do ,chop the roof ??

@charlescox6608 3 ай бұрын

Kind of looks like you chopped it,I hope not !!!!!

@monette44 3 ай бұрын