Designing a Hand Flamer in Blender
Рет қаралды 2,246
Күн бұрынThis is a project I'm working on so I thought I would record the process to show the workflow and thought process.
Designing a sci fi gun: • Using Boxcutter to des...
Support the channel on Patreon: / artisansofvaul
Free Add Ons
Old Modifier Panel: bluenile3d.gumroad.com/l/sexoc
Quick Snap: github.com/JulienHeijmans/qui...
CharMorph: github.com/Upliner/CharMorph
Simple Tabs: chippwalters.gumroad.com/l/si...
Edge Flow: github.com/BenjaminSauder/Edg...
Sculpt Bridge: blendermarket.com/products/sc...
(Affiliate links) SUPPORT THE CHANNEL BY BUYING SOME STUFF YOU WERE GOING TO GET ANYWAY ;p
Machin3 Tools: blendermarket.com/products/ma...
Hard Ops and Boxcutter discount bundle: blendermarket.com/products/ha...
Hard Ops: blendermarket.com/products/ha...
Boxcutter: blendermarket.com/products/bo...
Mesh Machine: blendermarket.com/products/me...
Just Panels: blendermarket.com/products/ju...
Construction Lines: blendermarket.com/products/co...
Cablerator: blendermarket.com/products/cb...
Mesh Copier:blendermarket.com/products/me...
Grid Modeler: blendermarket.com/products/gr...
Curve Machine: blendermarket.com/products/cu...
Decal Machine: blendermarket.com/products/de...
Punch It: blendermarket.com/products/pu...
One Click Damage (OCD)/Cracker discount bundle: blendermarket.com/products/oc...
One Click Damage (OCD): blendermarket.com/products/oc...
Cracker: blendermarket.com/products/cr...
Flowify: blendermarket.com/products/fl...
Simple Bend: blendermarket.com/products/si...
Conform Object: blendermarket.com/products/co...
Curves to mesh: blendermarket.com/products/cu...
Favourite modifiers: blendermarket.com/products/fa...
Wrap Master: blendermarket.com/products/wr...
@cristalPL 8 күн бұрын
8:05 One way to rotate the "inside" edge in a quad is to select the face, press Ctrl + F - Face Data - Flip Quad Tessellation. It won't look as sharp as simply adding additional geometry, but if you are going to triangulate the object at the end, it will look the same as if you had added the extra geometry. The Triangulate modifier should be set to Fixed if you are using this method, though.
@ArtisansofVaul 7 күн бұрын
Oh great tip! Very nice. I wonder if that will translate into how it appears if exported without adding in the edge. I'll have to try that to test it 👍🏻
@OffmetaQueen 3 күн бұрын
I believe the keyboard shortcut to access snapping menu is Shift + S. You can snap 3D cursor to active selection and then snap selected object to 3D cursor
@animatrix1490 3 күн бұрын
Was thinking of commenting this; you’re correct
@ArtisansofVaul Күн бұрын
👍🏻
@clive3490 10 күн бұрын
Your armies must be totaly unique. You MUST do a video displaying them!
@ArtisansofVaul 10 күн бұрын
@clive3490 That's what I try for. Though I'm hopelessly slow at painting 😅😂
@clive3490 10 күн бұрын
@@ArtisansofVaul im slowly learning how to use Blender from your videos. I just finished painting some commercial Napoleonic STLs that I edited to represent a minor German state. I posted the results on their FB page and even got a like and comment from the original sculpter
@ArtisansofVaul 10 күн бұрын
@@clive3490 Awesome job! Have you got a link? (I'm not sure if KZfaq will let you post it though)
@emmamarx9284 10 күн бұрын
Your workflow videos are some of my all time favorites ❤ thanks for the great video!!
@ArtisansofVaul 10 күн бұрын
@emmamarx9284 😁👌🏼 Thanks so much Emma 😁
@Yamanoochi 10 күн бұрын
I think, if it is a left hand - the pipe for ignition should go from another side, because it will be covered by the body of a mini. Thank you for your work! Great as always!
@ArtisansofVaul 10 күн бұрын
@Yamanoochi That's a fair point. It will be used one-handed so it won't be commonly towards the body but I could swap it around.
@wadeeliason969 10 күн бұрын
In loop select options in vanilla blender There is an option to select boundry loop when you have a loop of faces selected. I aded the option to my quick favorites
@ArtisansofVaul 10 күн бұрын
@@wadeeliason969 Good tip. I often forget about that being a base function as Machin3 Tools has it mapped to "2" so I use that as its faster.
@wadeeliason969 10 күн бұрын
@@ArtisansofVaul oh cool. I didnt know that
@Starflight_Miniatures 8 күн бұрын
Cool video, thank you!
@ArtisansofVaul 7 күн бұрын
My pleasure.
@jeanrenaudviers 10 күн бұрын
Thanks !
@ArtisansofVaul 10 күн бұрын
My pleasure 😁👍🏻
@k4x4map46 9 күн бұрын
nice workout implementing your recent tips!!!
@ArtisansofVaul 9 күн бұрын
@@k4x4map46 Thanks! 😁 I thought it was a good demonstration.
@k4x4map46 9 күн бұрын
@@ArtisansofVaul Definitely!!
@cristalPL 10 күн бұрын
Hey! As always, another well explained step by step tutorial. I do have one question, though. I noticed that your Boolean modifier solvers are automatically set to 'Exact' instead of 'Fast'. I found an option in the Boxcutter properties panel underneath Behavior that lets me switch which solver is used, but this selection does not save whenever I open Blender again. This issue even occurs when I save the Startup File after changing the option in Boxcutter. Do you have any idea how to save that solver option without having to select it every time I restart Blender?
@ArtisansofVaul 10 күн бұрын
@cristalPL Hmm.... That's curious. I think I'd changed it and then saved it in the startup file. It's odd that doesn't seem to work for you.
@RedBadSamurai 10 күн бұрын
now we need to show how to create the fire that he shoots))
@ArtisansofVaul 10 күн бұрын
@@RedBadSamurai 😁👌🏼 I have something fire related here (it's a bit of an older video): kzfaq.info/get/bejne/mKyfg7GZvsuXdn0.html
@pixelation782 10 күн бұрын
What theme are you using? I find the default orange a little hard to see but can't find another theme I like but yours looks good.
@ArtisansofVaul 10 күн бұрын
@@pixelation782 It's some changed settings from a matcap. I've got a video that includes all the settings here: kzfaq.info/get/bejne/pdihp5t33J3VaKM.html Hope that helps 😁
@pixelation782 9 күн бұрын
@@ArtisansofVaul thanks!
@KousseilaMd 3 күн бұрын
i have a question, is this much of virtecies not too much to render when used inside of a game ?
@ArtisansofVaul 3 күн бұрын
@KousseilaMd I imagine it depends on the game. I design for 3D printing so it's likely the rounded objects would want to be less vertices and then using some sort of smooth shading.
@KousseilaMd 3 күн бұрын
oh okey i see, i thought u design for game dev, great work tho btw💫
@fresh_vertices 10 күн бұрын
I stopped the vid as soon as he said box cutter
@ArtisansofVaul 10 күн бұрын
@fresh_vertices why? That seems a very odd reaction to one of the more commonly used hard surface modelling tools.
@fresh_vertices 10 күн бұрын
@@ArtisansofVaul Yeah but it's a paid addon
@ArtisansofVaul 10 күн бұрын
@fresh_vertices 🤦🤷 Well if you're happy taking the long road that's fine. You can perform these actions without Boxcutter so that's an odd reason to not watch a video.
@fresh_vertices 10 күн бұрын
@@ArtisansofVaul well you're skipping important, complicated shapes to do manually and the reason people wanna watch this video, to learn how to do those shapes, not just use an addon that does it for you. Next time include ''with addons'' in your title
@eduardwithau 8 күн бұрын
@@ArtisansofVaul The dude is rude but he has a point. I watched the whole video and enjoyed it, but it is not useful for me because of the addons. I wish you made a similar video but only used free addons.
The Spiffing Brit
Рет қаралды 722 М.
ANATOLY
Рет қаралды 25 МЛН
ANATOLY
Рет қаралды 25 МЛН
内山さんの日常 (Everyday Uchiyamasan)
Рет қаралды 8 МЛН