Designjet Carriage Repair T770, T790, T1200, T1300, T2300

No video

Designjet Carriage Repair T770, T790, T1200, T1300, T2300

Рет қаралды 28,367

Күн бұрын

The repair clip is available (in blue and grey) here: www.lpscompute...
*The part where I'm trying really hard to get the clip off is just a goof. It actually comes off with moderate pressure, even if you have the belt in backwards (like I do).
The carriage has one obvious weak point: the peg that's supposed to keep the belt clamped into the carriage tends to snap off during repair operations. If you're in that situation, you don't have to buy a whole new carriage! This clip is designed to retain the belt even more securely than the original HP design. If you've got the mechanical skills to get the carriage out of the machine, you're already past the hard part. If you don't know how to do that, we'll be making a video on that soon.
The belt retention clip is made of tough ABS plastic, and each one is stress-tested before we send it out. This clip is compatible with the following Designjet models: T770, T1200, T790, T795, T1300, T2300, Z5200, Z5400
CQ305-60016, CH538-67018, CH538-67044

Пікірлер: 22

@LPSshowsyouhow 6 жыл бұрын

*Additional disclaimer: I'm not going away. Bob

@donhook3544 3 жыл бұрын

That was one of the funniest/informative youtube vids I've seen re: Designjet printers. Thanks!

@narekkhalafyan643 4 жыл бұрын

Experts like you make this world a nice place to live 😁

@moemarchetti9337 3 жыл бұрын

Here's a funny story. I've only seen these posts broken off once and it was on T610. At the time the machine was less than 2 years old. I explained to the customer that I would have to order a carriage for it. He said "I'm not putting that kind of money into that old piece of junk. I'll throw it out and buy a new one." I tried to explain that the machine was not old and well worth repairing. He wouldn't budge. So I super glued the belt to the carriage. I told him to plan on a carriage when the belt wears out. He was happily plotting when I left and never heard from him since.

@ak47shem 5 жыл бұрын

After he said the words "expert like me" everything messed up.

@alexokill4749 5 жыл бұрын

This is gold, thanks Bob

@Cyberdactyl 5 жыл бұрын

_"An expert like me. Opps sorry, I did it wrong. Let be crack it off with this screwdriver."_

@ororo81 5 жыл бұрын

I wish I was an expert like you :(

@ak47shem 5 жыл бұрын

Sarcasm LOL

@Ladybug835 3 жыл бұрын

How to revoke the side carvers for t790

@paulkreski8409 11 ай бұрын

LOL. I love the struggle.

@cristiancaceres9278 3 жыл бұрын

I WANTED TO KNOW WHEN MY ORDER ARRIVED

@carloslozano6454 4 жыл бұрын

Realizan envíos a Colombia ?? Precios porfavor

@davidsawtelle429 3 жыл бұрын

Thats not how i route the belt

@carloandreatta 4 жыл бұрын

Anyone knows, how the carriage was broken? I replace the carriage with a new one but it was broken again after two weeks. ….

@carpediemonline360 4 жыл бұрын

They always break factory fault on these units, but ask the expert sure he knows.

@Ralpha1961 5 жыл бұрын

Funny and entertaining video. Does the carriage have to be removed to insert this clip?

@LPSshowsyouhow 5 жыл бұрын

It's possible but difficult to get the belt and clip on the carriage without removing the carriage from the rail. I'd say it's more of a pain than it's worth.

@LPSshowsyouhow 5 жыл бұрын

Hello. The carriage bushing can be replaced without taking the carriage out of the plotter. See: kzfaq.info/get/bejne/arBgdcWBvpy-io0.html