just a quick note: RO water is good for drinking but not RODI water.
@lpad321 Жыл бұрын
Does the siphon break immediately stop the back siphon? I built something similar and forgot about the siphon. Debating using a siphon break and/or check valve or just cutting the tube above the water line
@sntmods Жыл бұрын
Yes, the interior down pipe in the saltwater mixing station is cross drilled with holes above the water line for a siphon break.
@joshbroadbent23416 жыл бұрын
Good video👍 what kind of switch are you using? And I assume its controlling your heater aswell?
@sntmods6 жыл бұрын
DJ's Reef, it's a Leviton Wifi Plug connected via Wink app. I dont use a heater for the stored saltwater as the cooler water going to the display tank has very limited impact on temperature in such low quantities.
@joshbroadbent23416 жыл бұрын
O ok. So what's the 2nd thing plugged in?
@sntmods6 жыл бұрын
DJ's Reef, power cord to a surge protector. The GHL Doser Maxi is plugged into that.
@reefingaround44355 жыл бұрын
how did you clean the tanks?
@sntmods Жыл бұрын
Pressure washer after an acid bath
@maokinus5 жыл бұрын
Looking to do something very similar here. Do you have any links for the 1/4 fitting you have for the acrylic tube? I found the acrylic tube on tap plastic as you said but can't find a connector.
@sntmods5 жыл бұрын
Just a regular 1/4 plug-in fitting will do. I had some left over black bulkhead fittings from mist-king. Bulkreefsupply.com, home depot and many other places that carry plumbing parts for ro/di and ice makers should have them