Detroit dd13 dd15 dd16 overhead valve adjustment

No video

Detroit dd13 dd15 dd16 overhead valve adjustment

Рет қаралды 81,167

Күн бұрын

For more info about us and contact info visit Cardinaltruckse...
dd16 valve adjustment. I believe procedure is the same for dd13 and dd15.
Intake valve lash 0.4mm
Exhaust brake lash 0.6mm
37ft lb torque on all nuts.
DD15 & DD16 engines built before HDE0077481 exhaust brake lash is 4.1mm. DD 15 & DD16 engines built after HDE0077481 set engine brake the lash to 4.6 mm (0.1811 in.).
DD13 before HDE0079072 set the lash to 4.1 mm (0.1614 in.).
DD13 after HDE0079072 set engine brake the lash to 4.6 mm (0.1811 in.)
Cardinaltruckse...

Пікірлер: 72

@chananbrester2775 5 жыл бұрын

Pretty good video for the tune up process. However the only thing to correct is when you line up TDC 1 or TDC 6 the dot lines up with the pointer tab and not centered in the inspection window. Other than that good video.

@shrimpbrime6027 2 жыл бұрын

Yep, there's a pin time tool you can purchase to hold the motor as well.

@TATEXPRESSINC 4 жыл бұрын

Shoutout from TAT Express out of Hutchins, TX

@andyfederman 4 жыл бұрын

You didn’t quite have that on tdc. That nub in the inspection cover is an indicator to line up with the timing mark.

@owenjulien8151 4 жыл бұрын

i use a wrench and t-handle allen key. just to make sure that the adjustment is not lost.

@hectornieves4365 3 жыл бұрын

I second that

@therealMadpain 3 жыл бұрын

Your snap on dealer carries the Detroit barring tool, and it has a 1/2 drive for easy turning

@ryanohara462 4 жыл бұрын

Nice engine and nice country music on radio. Everything's good.

@bundylovess 5 жыл бұрын

Awesome job and thanks for posting

@andreysych8835 5 жыл бұрын

Good video man ! Waiting for more Detroit videos 👍

@michaels2204 Жыл бұрын

Thank you for a great video tutorial!

@shrimpbrime6027 2 жыл бұрын

Tighten the adjuster to 6 inch pounds then set the jam nut to 37 foot. Then you'll have a good setting. Nice work.

@WORM1100 Жыл бұрын

Is that 6 inch pounds by specs or a personal process? I was thinking there has to be a better description than just "with a little bit of drag"

@jeremylewis4450 2 жыл бұрын

A tight valve is is a happy valve? Not at TDC my man. The notch on the driver side of the bell housing is ment to line you up bro

@victorapaliso9439 3 жыл бұрын

Thank you dude for your informative video.

@MahA-pr7kr 3 жыл бұрын

Thanks for this video . is this one helps for the truck fuel mileage to go up . My truck freightliner cascadia 2016 has 3800k mileage. The fuel mileage recently dropped from 7.3 to 6.2 Don't know. I changed the engine filter and the truck still going 6.2 mpg

@rudydaberry122 Жыл бұрын

How do you know when #1 cylinder is at tdc without using the barring tool? Also how do you know when #6 is at tdc as well

@matthewhansen5008 5 жыл бұрын

Made it look easy. How many miles on the engine? Looks to be nice and clean inside.

@cardinaltruckservice3753 5 жыл бұрын

About 600k

@owenjulien8151 4 жыл бұрын

it is supposed to be done at least 100,000 miles, or when ever you remove the rocker arms.

@andyfederman 4 жыл бұрын

Snap on tool number s6206 valve adjuster set works well for those

@gperez9096 5 жыл бұрын

how did you make tool for jake

@owenjulien1991 3 жыл бұрын

It's an actual tool bought through Daimler

@edwunmartinez7720 4 жыл бұрын

Pretty good brother at Lattc I Los Angeles we did different but good vdeo

@briant7067 Жыл бұрын

Thank you !

@ricardodelgadillo8906 4 жыл бұрын

Muy buen video si pudieras realizarlo en español

@jack1990181 Жыл бұрын

Great video..thanks.

@shottava9314 4 жыл бұрын

How many miles do you recommend a valve adjustment after buying a new truck I've heard three different stories?

@cardinaltruckservice3753 4 жыл бұрын

+Woodzedge - I think every 200-250k is appropriate. Overtime the valve seats wear and may make the valve remain slightly open if you dont adjust. This can cause valve to burn

@shottava9314 4 жыл бұрын

@@cardinaltruckservice3753 ok thank you

@owenjulien1991 3 жыл бұрын

I've done ones at a 100k and then customers request and also when digging in the top of the motor.

@gillisgil8972 4 жыл бұрын

Nice easy when someone explain it knows what it's doing

@azharmehmood1497 23 күн бұрын

❤❤❤

@pat4532 4 жыл бұрын

Good explain sir . Help me lot.

@cesarvargas7736 5 жыл бұрын

Nice bro....

@orlanmedina3693 4 жыл бұрын

I belive to increase the HP besides adjusting the ECM you need to adjust valves more open. Am i right?

@owenjulien1991 3 жыл бұрын

Doing a valve adjustment has nothing to do with hp gain. It just cleans up the burn process of the fuel.

@JesusHernandez-lq5qu 4 жыл бұрын

Buen vídeo carnal gracias,

@vladbex 9 ай бұрын

Hi there ! Help Got question . I changed my cylinder head dd15. If I adjusted 1 round then turn flywheel to 360 degree and I’m with the same position to adjust 1 round again . Any suggestion?

@cardinaltruckservice3753 6 ай бұрын

No, flywheel turns 720 for one 360 on cam

@brianrojaszambrano7488 4 жыл бұрын

Muy buenos videos amigo;saludos de Peru.Usted me podria proporcionar manuales del volvo D13

@cardinaltruckservice3753 4 жыл бұрын

Glad you enjoyed it!

@EdwinMartinez-zt8sh 5 ай бұрын

Nice bro

@nathan00campbell 3 жыл бұрын

im guessing i need to do this on the cascadia i just bought. not sure if its fleet programing or this, but the jake brake is so weak that even bobtail you only barely notice if its on or not

@owenjulien1991 3 жыл бұрын

Would recommend this if you havent done so already. If the Jake's are weak they may have been used daily. Would only recommend using Jake's only when loaded and of course mountains routes.

@aureliorodriguez2839 4 жыл бұрын

Good video, thanks

@phayakoot1 Жыл бұрын

Thanks....

@simonsays6924 5 жыл бұрын

4.1mm EPA07, 4.6mm EPA10 and up

@cardinaltruckservice3753 5 жыл бұрын

+Simon Says That's right! Thanks

@jhonnybrotherwrenchrepair8152 3 жыл бұрын

Good video

@gulfmechanicalwork4183 Жыл бұрын

Second round timing i not see bro becouse i not understand

@edstransitscott9186 4 жыл бұрын

Great job, What is charge for running overhead on DD-15 ?, where are you guys located, Thanks

@cardinaltruckservice3753 4 жыл бұрын

+EDS Transit Scott $300. Near harrisonburg va

@cardinaltruckservice3753 4 жыл бұрын

+EDS Transit Scott $300. Near harrisonburg va

@edstransitscott9186 4 жыл бұрын

Cardinal Truck Service , I will try to get there, great

@owenjulien1991 3 жыл бұрын

149 per hour and I want to say it's a 2 hrs job I'm out of florence, sc

@EdisonSantos-ct5uf 2 жыл бұрын

Where are you located?

@hzpoinc8820 3 жыл бұрын

Where is your shop

@juancaa.4323 4 жыл бұрын

I also heard that if valves left open slightly, the engine performs better, is that true?

@lioalan9413 4 жыл бұрын

The valves will stay open as the wear. This is why you can hear a thumping sound coming from intake. If it’s bad enough you could feel intake manifold getting very hot in one area

@owenjulien1991 3 жыл бұрын

No you can cause down stream failures in the one box to the filter's. Also could damage the piston or valves themselves.

@Thatdpfmaid 4 жыл бұрын

DO YOU SEE A LOT OF AFTER TREATMENT PROBLEMS BECAUSE THE OF THE OVERHEAD BEING OUT OF ADJUSTMENT? VOLVO DETROIT CUMMINS?

@cardinaltruckservice3753 4 жыл бұрын

+Jason Lurie Not much, most are usually bad sensors or coolant in the filter

@Gilberto-mu8cp 4 жыл бұрын

You will see a lot of after treatment issues caused by overhead out of adjustment, if your valves are staying open longer that increases raw fuel in your 1box which can cause spikes in temps and even damage to your filters and reduces NOx conversion which causes MIL,CEL and SEL lights

@tabcaan22 2 жыл бұрын

Tkns

@joegarcia5207 3 жыл бұрын

What about the jakes

@owenjulien1991 3 жыл бұрын

What about the Jake's. I can tell you it's going to take a second person to assist in turning the motor at the inspection window. Suppose to adjust in order when the intake lobe is fully open.